BlackBerry Smartphones BB 9000 "BOLD" how to display Arabic text SMS

Similar Questions

• Battery for blackBerry Smartphones BB 9000 "BOLD"

  I have a BB Bold 9000 I want to reactivate for next trip. Love the phone. I bought a battery 'new' from our electronics store. It worked for about 2 minutes and charge currently; Peel the sticker off the Chinese coast of its some garbage. Can anyone recomment a source for a good battery for my old friend? Any help will be greatly appreciated.

  Mike

  You could, but I'm sure that there are internal circuits to overload prevention, indication of charge level etc. I don't think that there are simple cells.

• BlackBerry smartphones HELP - BB Bold - how can I use a number of PUK code?

  I used 8 out of 10 chance enter my correct password and the guys at the shop 02 told me how to get the PUK code number. Now I need to know if I need to enter any other text have each side of PUK number or just as it comes. Your help will be most appreciated.

  Usually, you just enter the PUK code as it comes

• BlackBerry smartphones my 9000 "BOLD" device software upgrade

  I've got DM 5 installed on my computer.  The process appeared to go smoothly until it has reached the fourth step (I think that what we call "Information ROMS update your device"), where I got an error stating: a fatal error occurred while updating your device software. Please try again.  I tried again without success.  Any suggestions? Fortunately, my BB was not damaged.

  kris_sordo wrote:
  version 5.0.0.11

  Well Yes, later.

  So... one thing, disconnect the Blackberry to the computer device. Restart the computer turned off.

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

  And try it all again.

• Display Arabic text

  I recently upgraded to windows 7 ultimate x 64. I'm trying to run a program that display Arabic text, but it shows the instead of unreadable characters. I downloaded and installed the Arabic language pack, but it does not work?

  Hello

  Is what program this?

  Do you know if it supports the English operating system?

  You should contact your supplier or the manufacturer of the program and check if this software supports and runs on an operating system with an English Interface. Unicode (Unreadable character) indicates that the software does not support your language.

  See you soon.

• Hi I need to know how to write Arabic text with indesign cc 2015

  Hi I need to know how to write Arabic text with indesign cc 2015

  One thing has changed: since CS6 (Version cloud only) you can install the operating system in Arabic or Hebrew any other language without extra cost.

• BlackBerry Smartphones BB 9000 os 5.0 update

  Hello Sir/Madam

  Please help me for my BB Bold 9000 Os update

  I install BB 7 Desktop Manager and I used to update the operating system of v.5... 0 for the mobile, but then that update it shows the error and it gives an error at "CONNECTING TO jVM" and it shows the error to "APPLICATION LOADER WAS UNABLE TO CONNECT WITH YOUR DEVICE. "PLEASE RE-CONNECT YOUR DEVICE, ENTER THE PASSWORD IF NECESSARY AND CLICK RETRY.

  Hello and welcome to the community!

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry Smartphones Black Berry Bold 9900 only able to ring if number in phone contact list

  Black Berry Bold 9900 only able to ring if number in phone contact list

  can someone help me solve the problem above his on optus and has just the stock of claims on this subject.

  Would appreciate any assistance.

  Perfect phone in all other respects.

  Hello and welcome to the community!

  I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• Problem in BBM blackBerry Smartphones - I do not have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel

  I don't have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel. Help, please!

  Thank you!

  Then you can try upgrading the BBM to the latest version available for your device?

  Make that first make a local backup of your BBM contacts, after backup, delete or uninstall any existing version of your BlackBerry. On your home screen, go to Options > Advance Options > application > BlackBerry Messenger > delete BlackBerry Messenger of this list (highlight BBM press on the menu key and select delete)

  KB10040 : How to view or delete the application installed on a blackberry smartphone 

  Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait a min, then reinsert back.

  Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your device.

  _______________________________________________

  Please note :

  If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance

  KB20554 : How to back up and restore the BlackBerry Messenger contacts list

• BlackBerry Smartphones (curve BB 8310) how to make BB IM installed on my curve w / a MAC? GRRRRR

  I need help for BB IM installed on my curve, download says I need to use the Desktop Manager.  I have a mac, not a desktop computer, I need the software or another download, im confused?

  Hi ness 23,.

  You can download BlackBerry Messenger by going to http://mobile.blackberry.com using your BlackBerry smartphone. You can find in the section "Staying in touch".

• Torch of blackBerry Smartphones will not send or receive photos of text

  Torch 9810.  At & T.  Brand new.

  Device will not receive pictures of the mass of text, or send pictures.  Already checked the settings and did a hard reboot.

  Help, please!

  Ah! It's another piece of the puzzle, indeed! Anything that might be useful that we do not know yet?

  In any case, I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If not, then you should certainly talk to ATT... It is quite possible that they are not completely passed your services with a BB to another...

• How to display different text for the labels in group above report Oracle report

  Hello
  
  Is there a way to change the text that is displayed in the labels in a report over the Group? For example, I have a report above group with my columns of data and above the columns, I have my column labels, but I would like to be able to display various text, i.e. different labels according to requirement. In other words, Column1 label could say column 1 or it's Column1, based on a condition. This is Oracle Report Builder 10.1.2.0.2.
  Thank you.

  If you use the wizard the column headers are created as fixed text elements. No way to change that.
  So, you have to delete text and replace by fields that use some of the columns in your data as the source model. This is how I create reports all the time. There is never any fixed text, all the text is retrieved in the data model.

  You can also use the format trigger. Simply place the elements of different text on top of the other and return TRUE or FALSE to display the correct label.

• How to display the text "APPROVED" the report as a background

  Hello
  
  I want to display the text "APPROVED" on the purchase order report as a background text... How can I do this?
  
  
  Please help me...

  Hello

  As ayoub said, 'standard text' can be rotated.

  Another solution is to use an image instead of a standard text.
  ' Insert a picture in the "margins"

  concerning

• How to display a text in Notepad in hindi font.

  If I copied a text to an HTML page that is found in 'hindi' language fonts in Notepad, then it is not printed in English language characters in Hindi language fonts. Please guide me to get the text which I am faced in Notepad is in a font of "Hindi".

  Thank you

  The respect of
  Bhushan K. Pinjarkar

  Hi Bobo KP,

  I see that you want to display a text in Hindi font. I'll help you with this problem.

  1. you have Hindi fonts installed on the computer?

  2. what security software is installed on the computer?

  3. What is the brand and model of the computer?

  4. have you installed the suite Microsoft Office?

  Try these steps and check the status.

  1 click the Windows 'Start' button and select 'Control Panel '.

  2 - Select "Uninstall a program" under the heading programs.

  3 - Click the program the list entry to the version of Microsoft Office is installed and select the button 'change '.

  4 - Select "Add or remove components," and then click "Next" or "continue".

  5 - Click the like next to 'Office shared components' to expand the category, choose expand the category of the "International support".

  6 - click on "Police Hindi" or "Universal Police" according to the version of Office, and then click "run from my computer.

  7 - click on "continue" to complete the installation of the police. Insert the office disc if you are prompted. Restart the computer.

  Once this is done, open a new word document and copy the HTML page which is in Hindi language and then try to print.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• How to display a text in child?

  -J' had two clips in the library (s1 and s2).

  -A obtained the text filed in each video clips ($text1 and $text2)

  I wrote the code to display the text of the two clips.

  However, s2 s1 showed the text, doesn't work. Why?

  Accessory for reference. http://Hotfile.com/DL/126771818/ed3ea02/test-addChild-display_text-CS4.Fla.html

  import flash.display.MovieClip;

  var a: MovieClip = new s1();

  a.x=stage.stageWidth/2;

  a.y=stage.stageHeight/2;

  addChild (a);

  var b1:MovieClip = new s2();

  B1.x=stage.stageWidth/2-150;

  B1.y=stage.stageHeight/2-150;

  a.addChild (b1);

  a. $text1.text = "a";

  a.B1. $Text2.Text = "b";

  Just for the demonstration of the first approach, I spoke with getChild... () - type methods...

  var a: MovieClip = new s1();

  a.x=stage.stageWidth/2;

  a.y=stage.stageHeight/2;

  addChild (a);

  var b1:MovieClip = new s2();

  B1. Name = "b1_s2_mc";

  B1.x=stage.stageWidth/2-150;

  B1.y=stage.stageHeight/2-150;

  a.addChild (b1);

  a. $text1.text = "a";

  MovieClip (a.getChildByName ("b1_s2_mc")). Text2.text = $ 'b ';.