is there a way to code with several people at once on the same page?

Similar Questions

• Is it possible that several people can work on the same folio

  Is it possible that several people can work on the same folio?

  I usually work with a friend on my folios. We have been working directly for a dropbox folder, and together have created us a user with the same name on our macs. This gives the same path to the file, so we can never be reprinted when we work together for this user account. Works very well.

• Is there a way to create multiple layers of tile map at the same time?

  Hello experts,
  
  I have a little problem. It is mainly a matter of saving time. I need to create layers of tile map 51, in mapviewer, and I'd like this given at a time. I can't go to the administration console-> management-> Manage map tile layers-> Create, and then I can create one at a time. But it would be great to create them all at once!
  
  I tried to use the interface in XML mode, and I can use the following code to create a tile layer:
  

  <?xml version="1.0" standalone="yes"?>
  <map_tile_server_admin_request>
    <create_map_tile_layer data_source="xxxx">
      <map_tile_layer 
          name="FOUNDATION" 
          http_header_expires="168" 
          image_format="PNG">
        <internal_map_source base_map="FOUNDATION"/>
        <tile_storage root_path="/scratch/tilecache" />
        <coordinate_system 
            srid="8265" 
            minX="-180" maxX="180" minY="-90" maxY="90"/>
        <tile_image width="250" height="250" />
        <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
        </zoom_levels>
      </map_tile_layer>
    </create_map_tile_layer>
  </map_tile_server_admin_request>

  And it creates a layer. But when I try this:
  

  <?xml version="1.0" standalone="yes"?>
  <map_tile_server_admin_request>
    <create_map_tile_layer data_source="xxxx">
      <map_tile_layer 
          name="FOUNDATION" 
          http_header_expires="168" 
          image_format="PNG">
        <internal_map_source base_map="FOUNDATION"/>
        <tile_storage root_path="/scratch/tilecache" />
        <coordinate_system 
            srid="8265" 
            minX="-180" maxX="180" minY="-90" maxY="90"/>
        <tile_image width="250" height="250" />
        <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
        </zoom_levels>
      </map_tile_layer>
    </create_map_tile_layer>
  
    <create_map_tile_layer data_source="xxxx">
      <map_tile_layer 
          name="FOUNDATION_WY" 
          http_header_expires="168" 
          image_format="PNG">
        <internal_map_source base_map="FOUNDATION_WY"/>
        <tile_storage root_path="/scratch/tilecache" />
        <coordinate_system 
            srid="8265" 
            minX="-180" maxX="180" minY="-90" maxY="90"/>
        <tile_image width="250" height="250" />
        <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
        </zoom_levels>
      </map_tile_layer>
    </create_map_tile_layer>
  
  </map_tile_server_admin_request>

  .. He's got that creates the first layer of the map tile in my xml request.
  
  Is it possible to create several map tile layers at the same time?
  
  Thank you!
  
  John

  Hi, John

  If I'm not mistaken, all definitions of the map are accessible through the USER_SDO_CACHED_MAPS view in the database.

  Think you can try to insert all your data in DB manually, but first of all consult the documentation

  Michael.

• Several areas of research in the same Page of the OFA

  Hello

  I'm new to OAF and while I practice the concepts, I have something in my mind on the creation of several search pages and tried to see how it behaves.

  I created a simple page with 2 regions serach (each from the different EO and VO). When I run the page and click on 'Go' on the first its got region performed on the two regions.

  I didn't write any code for it so far.  Strange thing is when I click on 'Clear' on the first region, that nothing is happening. But if I click on 'Clear' all values in the search field on the second region is eliminated from these two regions.  I know he is missing something, but don't know what it is. At this stage I cannot until the knowledge to build several areas of research.

  Can you please help me out here.

  When you have 2 pages of simple search, that's what I saw

  1 ' clear' on the first region button does not work.

  2. 'go' on the first region is performed on the two regions.

  3. "clear" on the second region performed on the two regions.

  Can you please help how to get to regions beyond?

  see the documentation for OAQueryBean (Developer's guide). You need to write code to support in your controller processRequest to support what you want.

  Concerning

  Marie Lise S

• Need help with styles of different links on the same page

  Hello

  I use Dreamweaver CS4 on a PC.

  I searched through a large number of posts during the last two days, I tried the tutorial projectseven.com, google would, etc., but still may not know...

  All I want to do is apply a different link color to some links at the bottom of my page. Elsewhere on the site, I put the color blue (for the link) and orange (for the hover)-for footer links, I want the link to be white and the hover to stay orange color.

  The problem with the projectseven tutorial is that it seems not to apply to the CS4 and I kept getting error messages when you try to apply a new CSS rule - there is no class. Tag | Advanced according to the instructions...

  I copied the code to my page for this. The links I want to apply a different style to are contained in the DIV called "Footer-Navigation-Bar.

  Could someone please give me some instructions or point me in the right direction please?

  Thank you very much

  Vickie

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  <!-saved from url = (0014) subject: internet->
  "< html xmlns ="http://www.w3.org/1999/xhtml">".
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  <!-TemplateBeginEditable name = "doctitle"-->
  the < title > Australia subscribe to the family - it's free! < /title >
  <! - TemplateEndEditable - >
  "" < link href = "... / family - subscribe.css" rel = "stylesheet" type = "text/css" / >
  "" < script src = "... / SpryAssets/SpryMenuBar.js" type = "text/javascript" > < / script >
  "" < link href = "... / SpryAssets/SpryMenuBarHorizontal.css" rel = "stylesheet" type = "text/css" / >
  <!-TemplateBeginEditable name = "head"->
  <! - TemplateEndEditable - >
  < style type = "text/css" >
  <!--
  a: link {}
  color: # 30;
  text-decoration: none;
  }
  a: hover {}
  color: #F30;
  text-decoration: none;
  }
  a: visited {}
  text-decoration: none;
  }
  a: active {}
  text-decoration: none;
  }
  ->
  < / style > < / head >

  < body >
  < div id = "container" >
  < div id = "banner" >
  < ul id = "family-subscribe-menu" class = "MenuBarHorizontal" >
  "< li > < a href ="... / index.html "> home < /a > < /li >"
  "< li > < a href ="... / subscribe.html "> Subscribe < /a > < /li >"
  "" < li > < a href = "... / family - advertise.html" > announced < /a > < /li >
  "" < li > < a href = "... / family - articles.html" > items < /a > < /li >
  "" < li > < a href = "... / family-sign - in .html" > questions < /a > < /li >
  "" < li > < a href = "... / family - contribute.html" > Contribute < /a > < /li >
  "" < li > < a href = "... / family - contact.html" > Contact < /a > < /li >
  < /ul >
  < / div >
  "" "" < div id = "sidebar" > < a href = "... / family-sign - in .html" > < img src = "... /images/Launch-issue.jpg" alt = "number of launch" width = "220" height = "380" hspace = "4" / > < / has >
  < div id = "sidebar-image2" >
  "" < p > < img src = "... / pictures/sleeping bag for Web.jpg" width = "220" height = "151" alt = "sleeping bag" / > < / p >
  < p > Kozy Koala™ Sleeper pillow is ideal for summer nights when children want to sleep or when go you camping. The camper all-in-one pillow is composed of... [MORE] < /p >
  < / div >
  < div id = "sidebar-image3" >
  "" < p > < img src = "... / pictures/solrx for Web.jpg" width = "220" height = "164" alt = "sunscreen" / > < / p >
  SolRX® solar filters are very sweaty and resistant to the water-ideal for anyone who leads a life active outdoor... whether you are in the water or not! [MORE] < / div >
  < / div >
  <!-TemplateBeginEditable name = "content-area"->
  < div id = "main content" > main content < / div >
  <! - TemplateEndEditable - >
  < div id = "footer" >
  "" < div id = "page-navigation-bar foot" > < a href = "... / family - about.html ' > on < /a > | "" < a href = "... / family - advertise.html" > announced < /a > | "" < a href = "... / family - contribute.html" > help < /a > | "" < a href = "... / family - contact.html" > contact < /a > | "" < a href = "... / family - unsubscribe.html" > unsubscribe < /a > < / div >
  < div id = "foot of page-text" > Family Australia | ABN 33150685385 | "For all advertising inquiries, please contact < a href ="mailto:[email protected] "> [email protected] < /a > < br / >"

  Copyright © 2010 family Australia. All rights reserved.
  < / div >
  < / div >
  < / div >
  < / div >
  < script type = "text/javascript" >
  <!--
  var MenuBar1 = new Spry.Widget.MenuBar ("family-subscribe-menu", {imgDown: "SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});})
  ->
  < /script >
  < / body >
  < / html >

  The links I want to apply a different style to are contained in the DIV called "Footer-Navigation-Bar.
  ......
  ......
  a: link {}

  color: # 30;
  text-decoration: none;
  }
  a: hover {}
  color: #F30;
  text-decoration: none;
  }
  a: visited {}
  text-decoration: none;
  }
  a: active {}
  text-decoration: none;
  }

  Hello

  You can see the CSS that applies to your links above.  If you have links you want to style in a different way, just write the rule as follows:

  #Footer - Navigation - Bar has: link {}

  color: Red;

  text-decoration: none;

  }

  Or whatever.  There are other ways, but this will make you as you already have these links you want to style differently in a div with its own code.  The new rule comes after other rules in your CSS I think that to make sure of the cascade, well thinking about, there is something called specificity in the CSS, which means that the rule I suggest will win anyway.  Everything you do in my suggestion is to select one: a link that is a descendant of an element with particular ID.

  I hope this helps.  I am a novice and might have gotten a little fuzzy with the waterfall/specficity but good, I think you get where you want to go...

  Martin.

• Several icon 'like' facebook on the same page

  Hello, I would like to ask 'like' icons of Facebook with Muse, I found the widget. But I have several per page for each of the items on a page. How can I do. Thank you

  Hello

  Please take a look at the following social media sharing tools, see if that's what you're looking for

  AddThis - Customize your Marketing with Smart Data

  Social media ShareThis buttons ' optimize brand and the content of the editor

  in case you have any other questions, please let me know.

• Integrate several sovereign wealth funds in the same page using SWFObject

  method. I tried this and it doesn't seem to work. In the example below, the film on the right (the boy in the hat) is incorporated by using this procedure

  but the two on the left (legs moving on button animation and dog order) should be installed using the installation of Dreamweaver swf methodology. and therefore the dog animation does not appear in Explorer 8 and some other browsers.

  Can anyone help?

  http://www.coolgelncap.NET/

  Thank you very much

  Elizabeth

  Several div you created to contain the swf file? Then, you will need to use the SWFObject code several times not just once... you have to tie the var so... code in each div and so.write () should be referred to correct divlayer.

• I don't like the new way that my e.mail subjects get stacked on the same page. How can I separate them when I transfer an or you want to print one. Thank you

  e.mail

  Windows Live Mail or Hotmail? If WLMail and you use 3, wave, (not very recent wave 4), while in the Inbox: view | Current view. Uncheck the box for chat Messages. You want only messages all checked.

  If you use Wave 4, or if that does not answer your question, please ask here.

  Windows Live Mail Forum
  http://www.windowslivehelp.com/forums.aspx?ProductID=15

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• How to load several HTML5 canvas on the same page (the right way)

  Hello

  I struggled to load several animations of canvas on the same page. At the beginning, I thought that export movies with different namespaces and reload the libraries in a sequential workflow might work, but it doesn't. It still load just the last loaded movie. More info here: coding challenge: what am I doing wrong?

  Here's a sample of what I'm doing:

  1: publish two flash animations with namespaces customized to "lib" defined in the "publication settings": "libFirst" and "libSecond".

  2nd: Edit the canvas tags in the HTML page. One called "firstCanvas" and another one called "secondCanvas".

  3rd: change the javascript like this:

          <script>
              // change the default namespace for the CreateJS libraries:
              var createjsFirst = createjsFirst||{};
              var createjs = createjsFirst;
          </script>
          <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
          <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
          <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
          <script src="{{assets}}/js/first.js"></script>
          <script>
              function initFirstAnimation() {
                  var canvas, stage, exportRoot;
  
                  canvas = document.getElementById("firstCanvas");
                  exportRoot = new libFirst.first();
  
                  stage = new createjsFirst.Stage(canvas);
                  stage.addChild(exportRoot);
                  stage.update();
  
                  createjsFirst.Ticker.setFPS(libFirst.properties.fps);
                  createjsFirst.Ticker.addEventListener("tick", stage);
              }
          </script>
          <script>
              // change the default namespace for the CreateJS libraries:
              var createjsSecond = createjsSecond||{};
              var createjs = createjsSecond;
          </script>
          <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
          <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
          <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
          <script src="{{assets}}/js/second.js"></script>
          <script>
              function initSecondAnimation() {
                  var canvas, stage, exportRoot;
  
                  canvas = document.getElementById("secondCanvas");
                  exportRoot = new libSecond.second();
  
                  stage = new createjsSecond.Stage(canvas);
                  stage.addChild(exportRoot);
                  stage.update();
  
                  createjsSecond.Ticker.setFPS(libSecond.properties.fps);
                  createjsSecond.Ticker.addEventListener("tick", stage);
              }
          </script>
  
  <body onload="initFirstAnimation(); initSecondAnimation();">
  
  
  
  

  Could someone please answer with best practices on how to do it? If possible, without the need to reload all libraries...

  If I only need to show a flash animation at the same time, it would be more efficient to cut/paste the canvas using jQuery tag in the DOM and reload a different lib on this subject?

  Thank you very much!

  #flash #reborn

  I was able to remedy. In the end, it was easier than I thought. Just publish using namespace different 'lib' for each film, load all the scripts at the end of theand add the following in the onload or ready events:

  $(document).ready(function () {
  
          var canvas, stage, exportRoot;
  
          // First movie
          canvas = document.getElementById("firstCanvas");
          exportRoot = new libFirst.first();
  
          stage = new createjs.Stage(canvas);
          stage.addChild(exportRoot);
          stage.update();
  
          createjs.Ticker.setFPS(libFirst.properties.fps);
          createjs.Ticker.addEventListener("tick", stage);
  
          // Second movie
          canvas = document.getElementById("secondCanvas");
          exportRoot = new libSecond.second();
  
          stage = new createjs.Stage(canvas);
          stage.addChild(exportRoot);
          stage.update();
  
          createjs.Ticker.setFPS(libSecond.properties.fps);
          createjs.Ticker.addEventListener("tick", stage);
  
          // Third movie
          canvas = dument.getElementById("thirdCanvas");
          exportRoot = new libThird.third();
  
          stage = new createjs.Stage(canvas);
          stage.addChild(exportRoot);
          stage.update();
  
          createjs.Ticker.setFPS(libThird.properties.fps);
          createjs.Ticker.addEventListener("tick", stage);
  });
  

• Redirect to the same page with the values of the variables

  Hello

  I develop a form to report data of the certain date range provided by the user.

  The problem is that I have to redirect the page back to the original page with the error message "not found in the date range" If the provided date range contains all the data in the database. I am able to redirect the page to the original page for help:

  < cfif queryname. RecordCount EQ 0 >

  < cfset action 'error' = >

  < Cflocation >

  < / cfif >

  And I use the < cfparam > for the creation of an action to navigate in the code, variable

  < name cfparam = "action" default = "" >

  [Use the < cfparam > above, tag at the top of the code and using action EQ 'report' and ' ' for navigation in the code]

  But, when I redirect to the same page, with the variable value measures of error and using cflocation he forget all varable values in the new page [way], then how can I pass a variable value measures on the same page and redirect it to the same page on meeting certain criteria.

  If this isn't clear, let me know.

  Help, please

  Vijayvijay77.

  vijayvijay77 wrote:

  
  ...

  
  

  And I use

  a kind of cfif to navigate inside the code. I'm doing something wrong here.

  You say that you guessed it at work.  But you have a dangerous code here (if you have not changed).

  The line will generate variables URLS when ColdFusion processes the page.cfm file once requested by the browser.  For example url.set and url.flag.

  Tags are NOT specifying the scope of variables, so they will default to the scope of "variables".  Who are the local variables of the demand for treatment.  For example variables.set and variables.flag.

  URL.set and VARIABLES.set ARE NOT the same variables.  And this confusion can cause some VERY difficult to diagnose the problems of code.

• to run several DAQmx AO tasks at the same time

  Is there a reason any cannot perform several tasks DAQmx AO at the same time?

  It's a bunch of questions that you listed there. I strongly suggest that you spend some time reviewing the many tutorials available for acquisition of data here: http://www.ni.com/white-paper/5434/en. You will need to get a better understanding of the work equipment, and reading some of these articles will help you considerably.

• I can't create several different uls on the same page

  There is a nav - ul on the page.
  #online - nav ul {}
  text-align: left;
  display: block;
  padding: 5px;
  Width: 130px;
  margin: 5px;
  list-style-type: none;
  }
  I need uls several points, squares etc. on the same page, width 300px and text sizes different and color etc. But every time I get ul I get the same div as above. How can I change the new lists?

  Thank you, that's all.

• I just wrote about firefox 3.6 with 5.0 for my mac OSX and discovered that my mac will not support it. Is there a way I can recover my lost files and recover the old version?

  I just wrote about firefox 3.6 with 5.0 for my mac OSX and discovered that my mac will not support it. Is there a way I can recover my lost files and recover the old version?

  You can download and install Firefox 3.6 http://www.mozilla.com/firefox/all-older.html

• I lost at the age of Mythology the titans expansion disc, but I still have key code, is there a way I can download age of mythology and put the key in to make it work?

  I lost at the age of Mythology the titans expansion disc, but I still have key code, is there a way I can download age of mythology and put the key in to make it work?

  Hi mxbot221,

  It is very unfortunate to know that you have lost the game disc. It is indeed a nice game that requires precision and work of the spirit.

  But the good thing is that you can download the demo version of the game among the links below and then, can enter the product key to unlock all its features.

  Here are the links: 1) http://www.microsoft.com/games/pc/titans.aspx

  2) http://www.microsoft.com/games/titans/downloads.aspx

  In addition, you can try to contact the Microsoft Supplemental Parts team for a replacement CD. To locate the phone number, visit the following Microsoft Web site: http://support.microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS

  Ref: How to replace Microsoft software or hardware, order service packs and upgrades, and replace product http://support.microsoft.com/kb/326246 manuals

  You can also try http://forums.gamesforwindows.com/ Games Microsoft support forum> for more discussions about the game.

  Hope this information was useful.
  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a way to create multiple BQY output to one of the Job file?

  Hello

  I use the EPM11.1.2.3.501 version.

  BQY report because of the large amount of data, it is difficult to use WebClient.

  Then share on a quarterly basis.

  However,.

  If change is to occur, there are difficulties must edit each file.

  For example,.

  Save the task BQY for 4th quarter 2014, 2014 3 q, 2nd quarter of 2014, 2014-1 q.

  When you run the task, the output of the work file is created.

  If the work file is changed, you must change all four files.

  This will not be growing creations.

  Is there a way to create multiple BQY output to one of the Job file?

  Please help me.

  Thank you

  It is not possible to have several BQY out in a work file.

  Thank you

  KK