Integrate several sovereign wealth funds in the same page using SWFObject

Similar Questions

• Preloader base for several sovereign wealth funds?

  I watched 100 + discussions on the web, not one right answer.

  I want an AS3 equivalent script for the following script (that I made):

  loadallthefollowingswfs.intocache ("home.swf", "products.swf", "contact.swf");

  I want a bunch of different SWFs, which are all in the same directory, be loaded into the cache before the display of the FSV.

  I want to put this text in the first image of an index.swf

  When it loads ALL SWFs in the cache, it will move on to frame 2 of the index.swf and keep moving.

  All other discussions about the State of the web is "have each loading of swf when it is open" (I won't want them all preload them in the cache before display anyone of sovereign wealth funds), or the so-called discussions "you should all FLAS combine in a single fla and preload just a swf file (I don't want to be I want to separate fla/swf files).»

  Anyone have any suggestions on how to load several SWF files into the cache when you access an image from a swf?

  Thank you.

  This should be the number instead of uint.

  and there should not be spaces in getNextHighestDepth()

• How a pdf manages several sovereign wealth funds during execution?

  If a pdf document contains several sovereign wealth funds, which get turned on and off several times, made each a series in its own instance of Flash Player?

  If not, can they run separately without problem?

  Can we SWF work for awhile and then another SWF run, followed by a return to the first SWF back to halfway through or it starts it Framework 1 again?

  By enabling a Rich Media Annotation, it forms a new instance of sandbox for the execution of the public Service, so you can have several active RMA simultaneously without too much trouble (except things like steal the focus from the other). They see each and other libraries and you can not share data directly with each other as the LSO is deactivated, but base-as a string data can be sent through tunnel via AcroJS If you know what you're doing.

  When an RMA number off, everything is cleared - Acrobat / Reader not automatically store any "data resume" but you can create a traditional recovery system by encoding the SWF to export/import status information for the PDF file. You need to ensure everything needed to "take back" is placed in the State of string data, then read and analyze whenever the SWF loads. Again, this data packet is not visible to other content.

• imported from sovereign wealth funds, get the main swf data

  Hello world

  I'm shaking my old AS2 here school mindset. I have a main swf file that loads a bunch of subordinate sovereign wealth funds. I need my SWF to see some variables in the hand. For example (example simplified for conversational purposes), let's say I have a swf loading (we tell littleSwf), who has set his rotation based on a variable (we tell swfRotation) hand. Rotation code is inside the small swf. How does this small swf said / what is its number of rotation?

  How would I do that? I have tried everything I can think and did some research, but apparently not in the right places.

  Any input appreciated.

  Dan P.

  If you load the swf file in another, chances are you use a charger.  Thus, the charger becomes the parent of the loaded swf file.  And the main SWF is the parent of the charger.  So, using the most common mindset AS2, you want to get any variable in the main swf by a the parent.parent targetng... file that in AS3, can be done using... MovieClip (parent.parent).

  A correct way OOP to getting the value of the child rotation is to assign it to the swf main once it has finished loading the child.  To do this, you assign a loader listener to determine when the file has been loaded, and then you have the main file target the child through the Loader.content property.  You could then have a function in the child that the principal calls and passes the rotation value to as argument, or have just the main file perform the operation on the child using the value of rotation if it is appropriate.

• is there a way to code with several people at once on the same page?

  In my class today, we were tasked to build a web page and it works a lot better if we could all work together both on the same pages.

  Your best option is to use a svn like github to create a repository and have contributors to fork your repository (and the code on the same page at the same time). While contributors send shooting you pray that you can use to merge code contributed in your master repo.

• Sharing graphics between several sovereign wealth funds (runtime sharing)

  I put in a quiz. I have a main .swf making requests to a server to get questions. The server then responds with a string of text is parsed, and the container issue is drawn on the screen. For example, the server may respond to the question "is the sky blue?" response = true '.

  My application would then create a box containing the question and two buttons labelled 'true' and 'false '. Each of these elements are drawn using various images of nine-patch that I include in the .swf file.

  My problem is the following. I want to include custom question formats. Instead of simple text, I want to add a question like 'click the blue square on this photo '. I plan do a bunch of these issues in Flash and export a .swf files. The server could then send one of these .swfs as well as issues of simple text.

  Some of these separate issues will contain elements (for example, buttons or text boxes) that I like to shoot in the same style as the questions that are created from scratch in the main application.

  I don't know what is the best way to achieve this. If I include the nine-patch images in each of the separate .swfs so surely I'll run into problems if I ever want to change the images. I have to recompile all the .swfs. I also want the user to be able to change the themes. It is easy to achieve if I swap on nine-patch images in the main application, but will be annoying otherwise.

  create one or more fla files that contain your (in) active symbol of shared.  in the library of the FLA, for each asset that needs to be shared: right click > click Properties > select export for runtime sharing and assign a class and a url.  (at least, to use a subdirectory of your main project directory because you cannot leave this field blank.)

  in all the SWF files that you want to use these common goods, create symbols (graphics are not relevant because they will be replaced by assets created in the fla above) > each symbol library you want to replace a right click > click Properties > check import for TIME sharing, assign a class name corresponding meanings that should replace this symbol and the use of the url the same subdirectory as above with the name SWF:

  

  

  in my swf file that contains the orange oval, all instances on the boards will be replaced by the green square.  at a later time if I wanted to use red squares, I would just change the symbol with the symbole1 class in my swf exporter to a red square.

• Export of sovereign wealth funds, get the thickness of line precise CS5

  Hello indesigners,.

  I recently tried to create a CV interactive little, nothing complicated, just an index page which links to the chapters.

  In the identity document, I use lines with very little wight (0.25 pt or 0.25px, depending on the print mode or the web). When I export to a SWF file the lines are always much thicker than they really are. It seems that the minimum thickness, it can show is perhaps, 1px, while ID can show more fine lines (do not know how it does, maybe anti aliasing?).

  I can remedy that and export it in the form of raster image, but then, it removes any interactivity.

  I just want to keep the items in the vector reduced to their actual thickness, does anyone know how to do this?

  I've attached a picture that she shows off quite well.

  http://DL.dropbox.com/u/25033198/Untitled-1.jpg

  Ah, Yes, of course for this. I forgot to treat the "fix" you found.

  It is a 'fix' rather than a real problem, because if you zoom in on this image, you'll see that it contains no pixel 1/4 more! The image renders too thin lines identical to InDesign: as light gray.

  There is progress and disadvances to save the image as a bitmap, rather than as a vector; I think that you are aware of both, and it is up to you to decide which method to use.

  If you are sure that your users (consider that they will look at what on paper) will not zoom in, you could still use the lines of 1 point but their light gray color, so the Visual effect is the same 100%. And it will look only slightly weird when your users zoom in - they will get * thick gray * lines, instead of * thin black * those, but it's still better than ugly pixels.

• display content in another region on the same page using URLs

  Hello Experts,
  
  I have a page with two region, say area A and area B. B area is a based sql report that displays lines of information on a set of files with the first column rendered as a URL to the file real itself. By clicking on this url, the content of the file is displayed in the same window, replacing the existing content. I would like for this file content to be disseminated within region A, without replacing the entire window. Is this possible?. I tried assiging a static id of the area has and use it in the url, but it does not work and I am still trying to determine that.
  
  Thank you
  
  Salome

  When you click on the link, get the URL and show the link in an iframe
  Assume that your report links are rendered as (HTML for the report)

    <td[headers="FILE_LINK"]><a href="http://myurl:8080/blah/blah">Blah</a></td>*
  

  Have a JS onload which causes by clicking on the link file to generate an iframe and load online (I would have chosen a dialog modal jQuery on a display online)

  $('td[headers="FILE_LINK"] a').each( function(){
    url = $(this).attr('href');
    $(this).attr('href','javascript:void(0);');
    t = $(this);
    $(this).click( function(e){
      e.preventDefault();
      t.after('');
    });
  });
  

  Note: change the link field selector to match your links in the report column

  As an additional comment: online showing a full html page (or a file) in a report could not be visually appealing, try to open it as a modal pop-up window.

• Using 1 movieclip in several sovereign wealth funds. possible?

  LS,

  I was wondering if it is possible to have a clip that you can as an export and then share in several .swf files.

  This, without importing them from external libraries in the .fla files afcourse.

  So as I have a movieclip containing bitmaps of tile of a different type (I do so that is why im asking)

  I use these tiles in the editor and in the .swf game;

  To change the graphics (adding to) the me import the mc from a .fla in the other.

  Is it possible to do mc in a .fla, export it and import it dynamic?

  Where can I read the other .fla library dynamically?

  Kind regards

  Mac

  So, I ask not to discuss, all I have to do is make a .swf with all my movieclips in there and without code.

  OK, but you must assign a class to each movieclip in the library of the swf file that you want to use.

  And then load the swf file to use the class assigned in my code in different modules.

  Yes

  Then, when you add graphics to the movieclips, I do not have to recompile my code?

  OK, any changes to the graphics of your movieclips will appear in all the SWFs that load this container resource swf movieclip.  no code should be rebuilt or recompiled to reflect the graphic changes.

• Several sovereign wealth funds on several layers

  Hello
  
  I have several video layers it appear and disappear depending on where the user clicks on the links above. Every video layer contains a Flash swf video file, which the user can start playing after it is the layer becomes visible.
  
  When the user closes the layer, or is another visible layer, then the video layer they watch goes, but the video continues to play on this layer. How to stop swf playback when the layer disappears?
  
  Thank you
  
  ------------------------S

  Google "stoppage of flash with javascript" or in the dreamweaver/flash
  Help files. There is also a function of commissioned film I think the DW - you
  might be able to reuse code to save a packet
  of work.

• Several icon 'like' facebook on the same page

  Hello, I would like to ask 'like' icons of Facebook with Muse, I found the widget. But I have several per page for each of the items on a page. How can I do. Thank you

  Hello

  Please take a look at the following social media sharing tools, see if that's what you're looking for

  AddThis - Customize your Marketing with Smart Data

  Social media ShareThis buttons ' optimize brand and the content of the editor

  in case you have any other questions, please let me know.

• Several areas of research in the same Page of the OFA

  Hello

  I'm new to OAF and while I practice the concepts, I have something in my mind on the creation of several search pages and tried to see how it behaves.

  I created a simple page with 2 regions serach (each from the different EO and VO). When I run the page and click on 'Go' on the first its got region performed on the two regions.

  I didn't write any code for it so far.  Strange thing is when I click on 'Clear' on the first region, that nothing is happening. But if I click on 'Clear' all values in the search field on the second region is eliminated from these two regions.  I know he is missing something, but don't know what it is. At this stage I cannot until the knowledge to build several areas of research.

  Can you please help me out here.

  When you have 2 pages of simple search, that's what I saw

  1 ' clear' on the first region button does not work.

  2. 'go' on the first region is performed on the two regions.

  3. "clear" on the second region performed on the two regions.

  Can you please help how to get to regions beyond?

  see the documentation for OAQueryBean (Developer's guide). You need to write code to support in your controller processRequest to support what you want.

  Concerning

  Marie Lise S

• Animation stops in sovereign wealth funds Long

  I have a few presentations I am creating using a single Projector/EXE, including the two sounds and animation. They are quite long in terms of how many images, they (current is 16 K images +) and the problem I'm running into is that the animation keeps freezing at the end of the presentation. Audio continues to play, but the animation freezes.
  
  I have tried everything I can think of, but do not find one solution other than to divide the project in several sovereign wealth funds and their loading (loadMovie) external. Ideally, I would like to be just a single file, but it's the only way I can find to make it work.
  
  Is there a problem with Flash only plays not passed a number of executives?
  
  Anyone else run into this? Any help/suggestions would be greatly appreciated!
  
  Thank you
  Mike

  OK, I answered my own question...

  It seems that Flash has just one problem with a LONG timeline... I guess that another reason why to use clips of film has its advantages!

  Mike

• How to load several HTML5 canvas on the same page (the right way)

  Hello

  I struggled to load several animations of canvas on the same page. At the beginning, I thought that export movies with different namespaces and reload the libraries in a sequential workflow might work, but it doesn't. It still load just the last loaded movie. More info here: coding challenge: what am I doing wrong?

  Here's a sample of what I'm doing:

  1: publish two flash animations with namespaces customized to "lib" defined in the "publication settings": "libFirst" and "libSecond".

  2nd: Edit the canvas tags in the HTML page. One called "firstCanvas" and another one called "secondCanvas".

  3rd: change the javascript like this:

          <script>
              // change the default namespace for the CreateJS libraries:
              var createjsFirst = createjsFirst||{};
              var createjs = createjsFirst;
          </script>
          <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
          <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
          <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
          <script src="{{assets}}/js/first.js"></script>
          <script>
              function initFirstAnimation() {
                  var canvas, stage, exportRoot;
  
                  canvas = document.getElementById("firstCanvas");
                  exportRoot = new libFirst.first();
  
                  stage = new createjsFirst.Stage(canvas);
                  stage.addChild(exportRoot);
                  stage.update();
  
                  createjsFirst.Ticker.setFPS(libFirst.properties.fps);
                  createjsFirst.Ticker.addEventListener("tick", stage);
              }
          </script>
          <script>
              // change the default namespace for the CreateJS libraries:
              var createjsSecond = createjsSecond||{};
              var createjs = createjsSecond;
          </script>
          <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
          <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
          <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
          <script src="{{assets}}/js/second.js"></script>
          <script>
              function initSecondAnimation() {
                  var canvas, stage, exportRoot;
  
                  canvas = document.getElementById("secondCanvas");
                  exportRoot = new libSecond.second();
  
                  stage = new createjsSecond.Stage(canvas);
                  stage.addChild(exportRoot);
                  stage.update();
  
                  createjsSecond.Ticker.setFPS(libSecond.properties.fps);
                  createjsSecond.Ticker.addEventListener("tick", stage);
              }
          </script>
  
  <body onload="initFirstAnimation(); initSecondAnimation();">
  
  
  
  

  Could someone please answer with best practices on how to do it? If possible, without the need to reload all libraries...

  If I only need to show a flash animation at the same time, it would be more efficient to cut/paste the canvas using jQuery tag in the DOM and reload a different lib on this subject?

  Thank you very much!

  #flash #reborn

  I was able to remedy. In the end, it was easier than I thought. Just publish using namespace different 'lib' for each film, load all the scripts at the end of theand add the following in the onload or ready events:

  $(document).ready(function () {
  
          var canvas, stage, exportRoot;
  
          // First movie
          canvas = document.getElementById("firstCanvas");
          exportRoot = new libFirst.first();
  
          stage = new createjs.Stage(canvas);
          stage.addChild(exportRoot);
          stage.update();
  
          createjs.Ticker.setFPS(libFirst.properties.fps);
          createjs.Ticker.addEventListener("tick", stage);
  
          // Second movie
          canvas = document.getElementById("secondCanvas");
          exportRoot = new libSecond.second();
  
          stage = new createjs.Stage(canvas);
          stage.addChild(exportRoot);
          stage.update();
  
          createjs.Ticker.setFPS(libSecond.properties.fps);
          createjs.Ticker.addEventListener("tick", stage);
  
          // Third movie
          canvas = dument.getElementById("thirdCanvas");
          exportRoot = new libThird.third();
  
          stage = new createjs.Stage(canvas);
          stage.addChild(exportRoot);
          stage.update();
  
          createjs.Ticker.setFPS(libThird.properties.fps);
          createjs.Ticker.addEventListener("tick", stage);
  });
  

• I can't create several different uls on the same page

  There is a nav - ul on the page.
  #online - nav ul {}
  text-align: left;
  display: block;
  padding: 5px;
  Width: 130px;
  margin: 5px;
  list-style-type: none;
  }
  I need uls several points, squares etc. on the same page, width 300px and text sizes different and color etc. But every time I get ul I get the same div as above. How can I change the new lists?

  Thank you, that's all.