Is there a way to copy the drivers and setup of the drive from the computer and transfer them to the reader of the dead computer?

Similar Questions

• Is there a way to copy the attributes of one composition to another?

  I use After Effects 7.0

  I would copy the same attributes of Zoom of a composition of 30 photographs.

  In Final Cut, you can copy the attributes of one element to another. Or from one photo to another.

  Is it possible to do in AE 7?

  Thanx

  Mike

  There are dozens of ways you can go here. You can duplicate the comp, then replace the images in the layout. You can create predefined animations. You can select all the animated properties and copy and paste in another layer. It depends on your workflow.

  I suggest that you look into the preset animations. I have over 200 of those custom in my system. They save a ton of time.

• Is there a way to copy the capture from one photo to another time?

  I recently re-scanning of pictures that were original scanned a few years ago. Giving them the same name as the previous scanned (only with a _1 at the end), I import the newly scanned photo in the same folder (which is how to organize my photos), to be able to compare and then copy the metadata from the initial analysis to the latter. As I did not yet all signs or notation, most metadata will contain only keywords. But stored under "Metadata" in the view library, 'Capture time' is also stored, but I can't in any case among the options "copy of the metadata. Is there something that I missed, or is there a work-around somewhere?

  Thanks in advance-

  OLE K

  Hi Ole,

  You cannot copy, but edit:

  In the menu goto of the metadata module library - change the Capture time.

  If you have multiple images selected when you choose this command, you set the active image to what you enter as 'date and time specified' and others will be adjusted by the same increment. Decrement in your case, as I suppose.

  So if you want it to be exactly identical to that of the old scan, you must do it one by one for each new analysis.

  Cornelia

• Is there a way to copy properties to disable conditional from one project to another?

  I have a bit of code in a project that I want to back off to a colleague and want to do a new 'reduced' project with only a few subvis.  I don't want to necessarily or need him for the entire project, but only access to a privileged few.  Is there a way to copy the conditional disable properties from one project to another?

  Thank you

  Tech12

  Thanks, it works, but I couldn't get the symbols will appear in the 'project' "Properties..."

  Tech12

• our macbook copy all messages and other activities of the iMac in the office. Is there a way to isolate the macbook?

  our macbook copy all messages and other activities of the Office of the IMac. Is there a way to isolate the macbook

  to be a fully independent computer?

  Your iCloud and any IMAP will be synchronized. You can connect with one another on the MacBook Apple ID, or you can turn off sync iCloud and IMAP account.

  System Preferences > iCloud

  Uncheck the items you don't want not synchronized.

  Mail > accounts

  Uncheck all of the accounts that you don't want not synchronized.

• Is there a way to copy / transfer / export existing assets from one site to the other?

  Is there a way to copy / transfer / export existing assets from one site to the other?

  I have like 20 + documents in one of my sites that I need to transfer to another site... What is a quick way to do without re - upload all my new Web site?

  Anyway, you would still re - download.

  If they are both sites of Muse you can open sites in Muse and copy and paste the desired content moved above.

• I lost my Muse files for my site, it is published on the website of Business Catalyst is there a way to copy it to my computer to change?

  I lost my Muse files for my site, it is published on the website of Business Catalyst is there a way to copy it to my computer to change? I don't know how to recover the copy on the site of catalyst for business.

  Thank you

  Mark

  Hello

  Please check this following thread

  How to recover my .muse file?

• Is there a way retroactively copy all the text highlighted?

  I pointed out the text in a pdf document without activating the function "copy the text selected highlight... ». Is there a way retroactively copy all the text highlighted?

  Yes, it is possible to do it with a script (in most cases). I'll send you a PM with more details.

• I have Windows XP Home Edition and use Outlook Express for my e-mail. Is there a way to copy/send e-mail, favorite contacts and my photos on a Flash key?

  Original title: copy files

  I have Windows XP Home Edition and use Outlook Express for my e-mail. Is there a way to copy/send e-mail, favorite contacts and my photos on a Flash key?

  Open the address book in the old identity and file | Export | Address book (wab) to any location on your HARD drive that is easy for you. The office is very well. Then drag that to the flash drive.

  In IE: File | Import and export | Export to a file. Check Favorites | Next | Next | Navigate to a folder or the desktop and export. Drag the folder in the flash player.

  For photos, just right-click on the folder and drag it to the USB and copy here.

• Is there a way to save the registry?

  I had a hard drive crash, the technology was able to recover all my files, but had to use a new disk to start. The old drive is now a slave but who no longer starts. Could not save my programs, because the new registry is not correct. Is there a way to save a registry and re install. Since all my files could be saved, I think there will be a way of not having to reinstall all my programs again. Some are older and after moving several times, I don't know even where to find the original programs to reinstall them, but I would use the the one I had. Also can I do a full backup of the entire system on an external drive that could be used to restore my computer to a State before the hard disk crash? (including the registry, of coarse)

  You can try cloning the old hard drive to a new one and then try to fix the boot errors. However, if there are other problems with the old hard drive, it may not work.

  But just passing the registry would not work. It is specific enough for the installation. You must move files much more (which would make a clone - it would be a 1:1 copy of your old disk).
  If the drive is not too badly damaged, a clone would probably work for to revert you to a State before the accident. However, it is not for the faint-hearted. You need a spare drive to clone and then to repair the operating system to start correctly as well as other errors that appear along the way.

• I'm moving from Vista to Windows 7. I get a question that tells me that I need a BIOS upgrade. I have an Inspiron 1720 laptop model. Is there a way to find the update is necessary?

  I'm moving from Vista to Windows 7. I get a question that tells me that I need a BIOS upgrade. I have an Inspiron 1720 laptop model. Is there a way to find the update is necessary?

  original title: bios update

  Hello

  you have a problem here as Dell does not have Windows 7 drivers available for your model of laptop etc, etc.

  Unfortunately, you need these Windows 7 drivers, etc. to upgrade to Windows 7

  read the information on your laptop on the link below

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WLH&OSL=en&SystemID=INS_PNT_PM_1720&CATID=-1&impid=-1

  For more information contact Dell about this

  Dell support:

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

• I have several documents waiting to print, but my printer no longer works. I got a new but is there a way to move the documents to the new?

  I have several documents waiting to print, but my printer no longer works. I got a new but is there a way to move the documents to the new?

  Hello

  What do you mean by "is there a way to move documents to the new?"

  What is the brand and model of your printer?

  Have you successfully installed the new printer?

  I wolud suggest you follow the method below and check if it helps.

  Try to follow the link below and check if it helps.

   
  Add or remove a printer
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
   
   
  Find and install printer drivers
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
   
   
  Print a test page
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page
   
   
  After you follow the steps in the link given above try to print the document in which you need.
   
   
   
  I hope this helps.

• Is there a way to check the product key on Windows 7

  Ladies and gentlemen

  Tablet of my wife is pre-installed with Win 7 and twice in recent years I needed to reinstall. The tablet with Windows 7 pre-installed and included the disc. I now find I need reintall again as complaints about the machine being slow emanate from the kitchen. While I wrote down the product key for the program that I find now that I have is to not store this piece of paper very solidly and can no longer find it. This raises a few questions. One option is to download the ISO file and install. I did, but it asks for the key of product, which was not really surprising. I have a desktop computer, but is there a way to get the product key without doing a full installation of Windows 7 on the desktop? I'm a bit lazy and do not want to save the office first, if it is not necessary.

  Thanks for your advice.

  David

  Unfortunately, it not that we cannot help you. Your best option is to use the recovery media provided with your computer initially noted in your post and allows to reinstall Windows 7.

  The tablet with Windows 7 pre-installed and included the disc

  What you can do is, create a bootable copy on a USB stick with WinToFlash

  Homepage of WinToFlash - install Windows USB-

• Is there a way to set the font size as default in WordPad - Windows 7?

  In Windows 7, is there a way to set the default value in WordPad to Courier 10? I see no place to set the default value. I save my changes and when I close and reopen the document it's back to Courier 11 and the spacing is all off. I create documents for customers who need very specific settings (including a 10 - PT font.) to copy and paste resumes to online applications. Once I have send the plain text for them, they, also, versions I can save these specific parameters. It's extremely frustrating; in XP and Vista, I was able to save 10-PT policy documents. I don't see why this was changed. Any suggestions? Anyone at MS have the power to solve this problem?

  I created a document called a new Doc - highlighted space vacuum-made my the font changes and size and saved.  So when I want a document with my size settings and the police, I opened my new Doc.  Make sure that when you save it you rename this new Doc remains empty.  I created a shortcut on the desktop and open the new Doc instead of WordPad.   I guess you can do your employees.  I hope this helps.

• Is there a way to keep the key without wire-paraphrase hidden in Windows 7?

  Windows 7 wireless network card allows users to view the paraphrase key wireless to a secure wireless network (see characters), while Windows XP and Vista keeps hidden key.  Is there a way to keep the key-paraphrase hidden in Windows 7, even for administrators?  If this isn't the case, I will allow all computers Windows 7 join my secure wireless network until this problem has been fixed.

  Thank you

  This is just another example of how Microsoft is not in contact with the real world. The other big problem that are domain with Windows 7 users is disabled profile copy. (I found a way around this one) As of today, I will not buy any more portable Windows 7 for our school district until Microsoft gets some of these problems taken care of.

  Once a user has the encryption key on their machine, its fairly easy, using Windows Connect Now [WCN], for the profile of wireless network on a flash drive and see the key in plain text in the\Smrtntky\Wsetting.txt file on the flash drive. This is a convenience for users who have wireless clients that cannot use WCN automatically, IE. a Linux client for example. WCN is and is available on Windows 7, Vista and XP.

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »