Is there a widget 'Please Wait' (preferably animated) for Apex?
One of my pages runs a procedure which can take about 15 seconds to complete. Leary of eager users by clicking on the buttons unnecessarily, y at - it a "Please Wait" animation available in Apex facility I can display during execution of the procedure?TNX,
Kim
P.S. I use Apex 4.1.
Just edit your button to change the target of redirection to URL and enter the code below
//replace the SUBMIT with your desired submit request, that's it!!
javascript:apex.submit({request:"SAVE",showWait:true});
Vikram
Tags: Database
Similar Questions
-
Portege M800 - at startup "Please wait" message remains more than a minute.
Hello
I'm French and I bought a laptop Toshiba Portege M800-10v!
Currently, this pc is great! However, I noticed something disturbing.
In fact: when you start Windows Vista, I get the message "Please wait", which remains for more than a minute! I found that I was not alone! But I can't find any information on it.
You know more?
Thank you.
PS: Excuse me for my English.Hello
If you have any new laptop and if it is connected to the internet for laptop will automatically download new updates and each of them will be installed after restart. If you should not be worried about it.
Yesterday I installed some stuff on Satellite P300 friends and I waited about 3 minutes after the first and the second restart. It bothers me, but there is nothing to do. To avoid this problem, I changed the update settings and used the check for updates but let me choose whether to download and install them.
-
Had an IPSec tunnel with a RVL200 at each end for well over a year. Lately the problems started with one of them. Attempts to open a session configuration pages (locally or remotely) or a VPN translates the message "system busy! Please wait a minute for re-login RVL200". Finally the RVL200 lock. Cycling the power unit is the only way to restore normal operation. Any ideas what can cause this?
I think the firmware may be corrupted. Try to reflash the firmware. Then do a hard reset and reconfigure the device.
-
Acer deal 10/10 cleaning please wait, this is what he says in a toolbar at the bottom of the screen, cannot get rid of
Acer support at the link above.
They will help you with your software Acer Acer support problem.
See you soon. Mick Murphy - Microsoft partner
-
I have installed on my desktop and laptop t-bird. The laptop works very well. They were all two currents 24.6.0 until I have updated the version on my desk today after that is the problem with 31.1.2. It still does not work. I get the same message over and over again even if he tells me that there are 200 + messages waiting to be delivered. This may not be an ISP problem as my laptop is on the same network, and as I said, works very well. The differences are: desktop running win 7 64 bit and laptop running win 7 32-bit.
Excellent, you solved your problem. Can you just mark the thread as "Solved" Please?
Thank you. -
When the check 6 accounts on a POP server, I get the message.
This file is being processed. Please wait until processing is complete, to pass messages.
This message started 14 2 6 accounts. I tried the suggestions at http://kb.mozillazine.org/Folder_being_processed and none of the suggestions correct the problem.
Is there anything else I can try?
Concerning
AGMNSLook again at the anti-virus software, restart your computer in safe mode with network.
This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX
Unfortunately, one of the main aspects of the anti-solutions antivirus is that they are almost impossible to actually 'pause' and fail almost exclusively to disable when they say they are and uninstall when you tell them.
-
x 305-q706 Stuck on splash screen where is says "Qosmio" with please wait...
Hello
recently purchased a Qosmio x 305-Q706. First time I booted up it gets to start with Qosmio screen displays with "please wait" down and hangs there forever. The only way I can get it to boot is to start cold and purée the key F12 for is loading from the startup screen, if I'm lucky, I can enter the option where you can choose which startup device, and if I manually chose the hard drive I can load windows.
Someone at - he heard of this problem or how to fix it? I tried to change settings in the BIOS nothing. Re-iterate, it is stuck on the screen with Qosmio pslash, and if I press a key on the keyboard once it says "Please wait...". "he brings me just to the bios: (.)
Any help would be appreciated.
Hello
This is a very stupid situation and I really don't understand why the laptop hangs at this level to start.
Is somehow your Qosmio confused and cannot decide which device should be the first boot device.
What is some external device connected to your Qosmio laptop?Maybe update the BIOS can help, but if you have all new laptop is not the solution. This is more recent laptop, and I presume that there latest version of the BIOS. So, if I were you I would contact either your dealer and ask for replacement or Toshiba service directly. This behavior is certainly not strange and laptop crashes somehow on the BIOS/POST (Power-On-Self-Test).
-
My laptop is stuck at "Please wait" forever.
After that almost a week of update of windows 8 to 8.1, when I connect my windows pc slain to a "Please wait" in the start menu forever, there is a Cancel option but it does not work, I can't reach the office, or anything like that. I picked up the phone once but the problem came again!
I called the team support and solution soved by the following steps:
- connect to the affected account
- Press the Windows key + L to lock the computer
- Switch to a user who has administrator privileges account
- Open the Task Manager and switch to the 'Processes' tab (press 'More details' If a process tab does not appear)
- find restoreoptin.exe & end task this process
- return to the affected account (Start Page, click on your account/image name, click the account that you want to pass to)
- Open the menu of charm (windows key + C), select 'Settings', and then change the settings of PC
- Select Skydrive
- Change the storage file, Camera Roll, and synchronization parameters (not sure which one that does the trick)
- logout and log of refund in
- you will be asked is no longer with the blank screen 'Please wait '.
-
Hello
Every time that connect us to servers of TS farm, the profile of the user load for a long time and she stays with a message "Please wait for the user profile service" for longer than 5-6 minutes. We work in two areas which is configured as "an endorsement of forest transitive way." The domain (domain A) with TS farms hence connect us a cross forest profile disabled so we cannot load the roaming profile in this area, whereas another domain (domain B) roaming profile user's roaming profile.
Also in the directory the Active directory of the domain B, TS/RDS settings is enabled for the problematic profile.
TS / RDS--> roaming profile path and TS home folder is configured. TS/RDS settings is configured because we use other farms of machines/TS citrix other than the one in which there is problem.
When disable us TS/RDS of the directory settings active directory domain B, then it is extracted to improvement in time. But we're in a situation were we cannot disable TS/RDS settings as we use other Citrix machines also. So we tried configuration GPO in A TS domain as
Which allows to "allow only the local user profile".
Allowing 'profiles itinerant Prevent password propagation to the server.
This allows to "Allow asynchronous user group policy processing when you connect via Terminal Server Services"
But still, there is no improvement in the time taken by the server to connect. What is the adjustment to make in the field of A TS, such that he will not try to charge the roaming of the B domain user profile, even if TS/RDS settings for the user profile are configured?
Forums of evil: you want to Technet forums. It's more domestic consumption...
-
remote desktop hang at 'Please wait for the system event notification' during logoff
When I disconnect a remote connection, sometimes the GET logoff screen stuck at "Please wait for the system event notification" next time I try to open a session.
This can also happen if that I disconnect the user, but the user seems to weigh on this same screen as well.There is a particular difficulty for this? I can connect as long as administrator to another account, I can't kill connection attached somehow to be registered in the next time?
Thank you
Hello
I suggest you to take a look at the answer in this thread and check if it helps.
Hope this helps,
-
Pavilion x 2 stuck on Please wait
Hi a friend asked me to look there for laptop computer, when you start it it shows the HP symbol then moves a blue screen and then the wait please rises, I guess that's where windows is supposed to load but its there just with points going in circles, I've never used windows 8 or one of these things , so I'm a little out of my depth, I tried to reset the bios back to default values and I run a diognostics check and it came to pass that no problem so I guess it must be a software, its been like this since just after she bought. Why she did not return it so I don't know all I know, is that she tried to put the itunes on it, but he said there was not enough memory space or that she could not remember who he was as it was some time ago.
Any help with this would be welcome
Hello ramasesuk, welcome to the Forums of HP.
I see that you are working on your laptop the friends, that it does not load in Windows properly, you get to a 'please wait screen. I will try to help you with this.
At the start, have you tried to enter Safe Mode? If so, could you. If this isn't the case, I suggest to start with this.
If you can get in Mode without failure, you can try a Refresh in Windows 8.
If you can't mode without failure, it may indicate a bad image of the operating system. For this, you will need perform a system recovery. If your friend isn't a recovery media, she may need to contact the support for this.
This document will guide you through the recovery process: view together to recover the operating system or reinstall the operating system. Read everything and use sub documents it leads you too.
In case you need to contact support, the information here:
Technical support of HP, 1-800-474-6836 in North America. For all other regions, please click here.
http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html
Please let me know how it goes.
Thanks for posting on the HP Forums. -
Configuration automatic please wait blinks on the screen every few seconds, why?
Whenever I start my computer a small window with the text "Auto Config please wait" flashes in the center of the screen every two seconds. This continues for a few minutes. After that he produced intermittently, but each time that it the screen dims and for a few seconds, I am unable to do anything either, no key or mouse fills it. Any suggestions? I scanned and repair errors and defragmented
Hi YvetteBarnes,
1. did you of recent changes on the computer?
2. What is the version of Windows installed on the computer?
3. What is the number of brand and model of the computer graphics card?
The error message occurs generally if there is a problem with the monitor adapter or graphics on the computer.
Method 1
I suggest that you change the resolution of the screen on the computer and check if the problem persists.
Change your screen resolution
http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution
Method 2
If the previous step fails, then you need to update drivers graphics card on the computer manually by visiting the card manufacturer's Web site and check if it works.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
If the problem persists, then connect another monitor to the computer and check if it works.
I hope this helps!
Halima S - Microsoft technical support.
-
VISTA FREEZE AT STARTUP - PLEASE WAIT
Hi need urgent help! PLEASE
Last night Windows Vista Home d/load updates new update - IE 8 and I uninstalled Avast anti virus and put on PC Tools antivirus. He asked me to reboot I did and now when you start it freezes on the screen "Please wait" the circle continues to run and is as it is in train of thought, but nothing. I tried to start in Safe
mode with and without networking with the command-line - all with the same result.This Acer is fairly new, the last month or two, not sure of exact specifications, but I don't even have the ability to repair vista or restore it from a previous configuration. Only the options as safe mode to get those and start windows normally.
The computer came loaded with Vista Home pre and so I don't seem to have the discs. I know that normally the backup of vista is located on the drive partition, but how do for her if I can not load in Windows? I need to solve this problem, as long as it's not not my computer and feel very guilty!
Please, if you answer no to answers tech difficult indepth I know a little but good not to juggle with the inside of the model...
You press Alt and F10 for an Acer eRecovery Partition.
Acer eRecovery made
1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.
· The unit is able to reload Windows from this mode faster then CD.
· The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.
· Users are able to change the password in this mode for eRecovery only.
· The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.
· It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.
2. in Windows, there are 3 ways to access eRecovery functionality.
· Press Alt and F10
· Open Acer eManager and then double-click eRecovery.
· When a system is new it should automatically open this application and invite you to do the recovery media.
See you soon.
Mick Murphy - Microsoft partner
-
My HP Photosmart Premium is saying "preparing the printer can not be interrupted. Please wait... "What is happening?
HP support
Edit:
I know that maybe it's a little late to come and see this post was several months ago, but I had the same problem.
I ended up turning off the machine and opening printer and check the ink cartridges (I had seen just to find the part number for a new cartridge). I found that the blue cover which snaps into place on the ink cartridges was broken not closed completely. This has caused the printer constantly tries to go into maintenance mode, but it could never align cartridges. She also told me that there is a paper jam, even when there is no paper in the machine. I even let the maintenance run all night without success.
Once the cartridges have been broken in place and the blue cover has been fully guaranteed, the printer worked.
above compositions of this thread:
-
Windows pop up on my screen that says "Please Wait".
Original title: pop-up windows
I continually have the 2 inch Windows pop up on my screen that says "Please Wait". All color sheets and everything stops until it emerges. What is this and how do I get rid of him?
Hello
· Do you use the computer laptop or desktop?
· When exactly do you get this message pop up?
· Were there recent changes made on the computer before the show?
Follow these methods and check if that helps:
Method 1:
I suggest you to update the latest drivers for the graphics card on the computer and check if it helps:
How to manage devices in Windows XP
Method 2:
This article is intended to help you use the resolution of the issues of video display that is included in Windows XP Help and Support Center. This article also provides a list of online support services that may help you solve your problem.
Resources for troubleshooting problems in Windows XP
http://support.Microsoft.com/kb/307960
Connect your computer monitor to a spare computer and see if the error 'Please Wait' always appears. If so, it's a problem with the monitor.
Maybe you are looking for
-
Satellite click 10 - keyboard battery is not available
Hi, just bought a LX5W 10 click and the State of the battery for the keyboard says "This battery is not available for use" the keyboard works fine. I've updated the bios and 1.7, responsible for 24 hours and the windows update 10 nothing helps. Any i
-
WordPress 3.1 buttons will not work in pages
Using FF 3.6.15 and Wordpress 3.1 I can get the java buttons to work on posts, but not on the pages. In other browsers, they work very well. Anyone else having this problem?
-
Hello everyone, (sorry if this question has been asked before, but I didn't see no-thanks) I have a HP Deskjet 4180 all-in-one. I'm running on a Vista operating system - Home Edition (x 64) - the printer works fine. However, the scanner is not. I put
-
Dark or light theme? (Or both?)
In the first version of stunts, everything was in a dark theme. With this last update, most of the things have been changed to a theme of light. Two questions about this: -It will be a unique theme for all applications of waterfalls (Dark is phased o
-
Come to tmobile to Vodafone naturally number overall, since 16:00 todat number active but unable to use the phone as cannot cross the message above... Voda told 3 different responses on many calls... 1. be patient may take 48 hours for network config