RVL200 displays "system busy! Please wait... ' when loging in to the configuration page.

Similar Questions

• Monitor issue - gray area in the middle of the display indicating "AutoConfig please wait."

  Original title: monitor question

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have an Acer monitor with my computer.  A gray box appears frequently in the middle of the display indicating "AutoConfig please wait."  This happens while I'm in the middle of a document or research online.  What could be the cause of this and how to fix this?  I am running Windows Vista.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  This problem occurs mainly due to the graphics card which is present on the system, in simple terms, the graphics card try to adjust the resolution of the screen on the computer for better display.

  I suggest you to follow the steps mentioned by Mouneshwar R in the link mentioned below and let us know if the problem is solved or not.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/5eecbcbb-6DA2-498d-878a-cd36ae0e5981

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Z10 Z10 "Please wait while your device is the software update and restart"

  Sorry if this question has been asked elsewhere but I searched and could not find an answer the applies to my particular situation.

  I have a Z10 on Bell who got an automatic update this morning (I have no note of my operating system version number or the version that I was updating to) and the phone is locked to the prompt "Please wait while your device is the software update and restart."  Update messages said it would take a lot of time and that I should connect my phone if it was less than 20% of battery.

  The Bell's Web site indicates that the version of the software is 10.3.2.2168 and the latest version of the OS is 10.3.2.2252.  I don't know how many times this site is updated, but I guess that's the version that I am trying to update?

  (http://support.bell.ca/Mobility/Smartphones_and_mobile_internet/Operating-Systems?alias=BlackBerry-Z...)

  The phone is not fixed... I can see messages turn on the lock screen and interact with the phone to get a glimpse of these messages, but if I try to unlock the phone, the message block appears above any function, I tried to launch (whether a text message, the camera, an email, etc) and I can't interact with the phone at that time otherwise than to lock again and open the lock screen up.

  At the time wherever I drag, the prompt.

  The prompt on the phone for about 6 hours now.  The battery was full this morning and had exhausted 70%, but I've since plugged.

  I have not tried a batt pull because I'm afraid of the consequences of this action after the launch of the update.

  Everyone knows this and had the phoen back? I know that 6 hours is well past any reasonable wait times in my books and was strongly tempted to restart the device... but is there here experts who recommended that I continue to wait?

  I forgot to mention that the power button was still working to give the ability to power off the unit.

  In the end, I couldn't wait any longer.  I put off the device "no risk" with the power button, rather than using the battery pull method.  I turned on the camera back later and the blackberry logo appeared.  The screen faded faded black and no lights appeared on the phone.

  I could hit to swipe down to get the blackberry logo to return to the screen, but no startup loading progress screen never wouldn't come.

  I could never get to the home screen, but the phone was actually 'ON' below.  I could call the phone and it should sound, but there is no visual indication that the phone was working and there was no way to respond.  Sliding down to unlock simply revealed the word "blackberry" in the middle of the screen.

  I did a Batt pull and this time, the logo appeared as before, but disappeared forever... and then the progress of boot screen appear.

  The words 'from 10 Blackberry OS' were visible on the bottom and rotate it beween this and "install updates".

  Start-up took a LOT of time (15-20 minutes?) but after that, everything was fine.

  Displayed software update version information and it is indeed updated to 10.3.2.2168.

• Window Vista freezes on the screen "Please wait", Symantec seems to be the problem have reinstalled but the problem persists

  Hi all

  My Toshiba Vista laptop hangs at the screen "Please wait" when restarting. I tried the clean boot and reduced to protection services of Symantec Endponit (event and the settings manager and Client Management). I went to the website of symantec and installed the latest version, but the problem persists. Any suggestions?

  Also sometimes after you start clean it will normally start with running symantec services and then go back to the gel next time I stop but I haven't worked why/when this happens.

  Thank you

  Frizzaldo

  Hi Frizzaldo,

  I'm glad to hear that you were able to find the guilty program causing the problem.

  I suggest that you completely remove the computer using the Norton removal tool, and then install the latest version of Norton, check if it works.

  Norton removal tool

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  If you are still experiencing problems with Norton, then you will need to contact Norton support to see if there are known problems and no fix available.

  http://www.Symantec.com/support/index.jsp

  Note: you can also use Microsoft security essentials, but before that, check with Symantec for any fix available

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I forgot my bios password please help when 3 times hit the code 99470161.

  I forgot my bios password please help when 3 times hit the code 99470161.

  Thank you

  Hello

  Enter: 26558167

  Kind regards

  DP - K

• There was a problem with the current system. Please try again later. If the problem persists, contact customer service.

  There was a problem with the current system. Please try again later. If the problem persists, contact customer service.

  Why?

  Please tell us what Adobe application you are trying to download. Please try creative cloud install app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• Why my internet explore stops when I click on certain links, when I'm on the web page of someones

  original title: slightly annoyed

  Why my internet explore stops when I click on certain links, when I'm on the web page of someones

  Hello

   
  What operating system is installed on your computer?
   
  What is the version of Internet Explorer you are using?
   
  Is there an error code or the message that if displayed when you click on a link in the browser?
   
  Check out the link and follow the steps.
  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• applied range__i resolution the resolution of my screen to the highest frequency and my screen is black screen and out of reach, I restarted my pc, but when it came to the login page my affixed screen again the same how can I get it back

  I chose my resolution of windows xp to the highest frequency screen and my screen become black and displayed out of reach, I restarted my pc, but when it came to the login page my screen shows again her even, how can I get it back?

  Hi hcosdihv,

  Start the PC in safe mode then go back to the display settings and set the resolution to a lower level.

  You start in Mode safe by constantly pressing the F8 key as your PC starts. A menu will appear and you must select the Safe Mode option.

  Once you have changed the screen resolution, you can restart your PC normally.

  Make sure that you "only" to select an output of the range option.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk;  Web: http://xphelpandsupport.mvps.org;  Web: http://vistasupport.mvps.org;  Web: http://www.silversurfer-guide.com

• When I connect to the adobe page with my adobe id, I see onl "free membership". Its my right adobe id. I'm invited into a "working group" how to enter the license key I bought?

  When I connect to the adobe page with my adobe id, I see onl "free membership". Its my right adobe id. I'm invited into a "working group" how to enter the license key I bought?

  You accepted the invitation? If not please accept and share the results. Please try different browsers in case you are unable to accept it.

• My file is configurΘ for dΘmarrer in full-screen, but falls off full appear when you go to the next page. What should I do?

  File created in Acrobat Pro XI to open the mode full screen.

  Open the file in Adobe Reader on a different computer, it opens in the mode full screen. However, when I go to the next page, it falls on full screen.

  I have absolutely no idea why and have no idea how to do to prevent it from happening.

  Any help is greatly appreciated!

  Hi RiggerPJ,

  Please check if the preference look at a full screen or not.

  Also open Reader, go to the Help menu and check for updates.

  Kind regards

  Nicos

• Designed the large page background color/text and images. Seems ok, but when I send pdf the background page is much too small.

  Designed the large page background color/text and images. Seems ok, but when I send pdf the background page is far too small - the drawings are ok.

  Send to the printers tomorrow but pdf does not appear correctly! Any ideas? Please, I beg you!

  Please tell us

  -This page - is that he recorded in a graphic file? What type? If not, where is it?

  -How exactly do you send as PDF - what app do you use? and what are the measures?

• HP 15 Notebook PC L3Q92EA #ABU: HP Pavilion, 8.1 Win "Please wait" when the unlock screen saver

  Just bought an HP 15 Win8.1 running laptop.  I think it's a huge pain to use.  Once the screen lock is committed, it takes forever to get the login screen to appear.

  I move the mouse or press a key to get the screen to go back, but I see is the screen "Please wait" for more than a minute then a background appears.  Click the mouse and I have one more minute of "Please wait" before the logon screen appears.

  Can anyone help, until the laptop goes through the window?

  Hello

  Thanks for posting your concern on the Forums for Support and sorry about the problem you are having. I went through your post and it sounds like I should be able to help with the problem.

  I suggest you perform the test (Test of the HARD disk) on the computer. Follow the steps below-

  • Switch off the appliance.
  • To turn back press the power button and as soon as you release, keep pressing the "ESC" key, unless a screen comes up, you might want to wait a minute while tapping the button.
  • In the start menu, choose F2 - System Diagnostics.
  • HDD test would be under the Test component. (usually, it is recommended to test rapid and wide, but for now because the PC is new I rather suggest you simply run the Quick Test).
  • After you choose the Quick Test, click on run once.

  If he succeeds, you can proceed with the recovery, part if she fails to give a call to tech support at the number mentioned below, since the unit is under warranty, you should be able to get help to get the drive replaced.

  On the recovery procedure, its complete restoration of unit settings factory which means that the data on the computer is cleared and with it, the software that can be installed on it. Please follow the steps below to perform recovery-

  • Switch off the appliance.
  • To turn back press the power button and as soon as you release, keep pressing the "ESC" key, unless a screen comes up, you might want to wait a minute while tapping the button.
  • In the start menu, choose F11 - system recovery.
  • On the next page of options, you can choose - "troubleshooting." (If it is a unit of windows 8, or you can skip this step)
  • On the next page, you will need to choose "Recovery Manager". (If it is a unit of windows 8, or you can skip this step)
  • On the next page in the first column, under "I need help immediately", you must choose "Reduced Image Recovery"
    • Now, here, you can get an option to backup your files, because it would be an option to say - recover after saving files or recover without backup of data.
    • You will need to insert the disc followed the screen - instructions here on and unit should be returned to its original state.

  Now if you need help email us back or call HP SUPPORT @ 1-800-474-6836 [24/7 SUPPORT].

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• hangs on the screen "Please wait" when starting

  I have windows 7, and sometimes during startup, it hangs at the screen "Please wait", just before you get to the screen loggin. the occasional flourish - almost every time now. If it is not "hang up" it will show the screen 'Please wait' for a second or two, but if it does not crash, it is hung: I mean, I waited as much as 20 minutes or more to see if it's something treatment or make configuration changes. is there a change in the configuration file, I could do?

  Hi Dale,

  Thanks for posting your query in Microsoft Community.

  I understand from the information you have provided to us, that your computer hangs during startup in Windows 7. I will certainly help you in this matter.

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• When I click on the home page, it gives me the page but oriented to the bottom of the page. What is a small problem with the last update? How to fix it please.

  Updated Firefox to day today. Suddenly, my homepage is upward. When I click on home, he goes to the correct page, but pulls down of it every time. I want to straighten it please.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• HP Pavillion Smart Touch 15: turn on computer, says please wait or AutoFix and then the screen turns white. Goes no further

  My computer was las night. I turned it on this morning and it says the auto repair or please wait a few seconds then screen goes black or white. It doesn't let me do anything else. It is located on a white screen. Help, please

  Hello

  Here's the follow up:

  -You cannot restore your files once the HARD drive goes 'bad '. You can try to start the computer by using a few Linux based Live rescue CD, but chances are very small

  -You can not restore factory default before replacing the HARD drive as the old is defective. You must insert a new and then restore because the information is indeed stored on the HARD drive (new)

  -If you know how and where you can event the same HDD - manufacturer 678312-002

  If this is not the case, just use some as suggested above and as explained in the guide Service and Maitanance.