Is there an equivalent to MID() to Apex-compatible function in PL/SQL?
I tried to use the MID() function in Apex to see he is not supported by Apex. Is there any equivalent of the Apex, or what I write (God forbid) my own?Steve "n00b" to Raleigh NC
Remove the existing button and create a new one?
CITY
Tags: Database
Similar Questions
-
Is there an equivalent to press a hashing key when talking about Apple Watch phone app. ?
I tried to leave messages on the voicemail of the recipient but to end leave my message, I wonder to press the pound key, which I can't do the watch. I tried pressing the red button "end" on the dial of the watch, but that has not worked. I ended up having to take my phone out and starting from scratch.
Thanks in advance.
Hello
If you want to suggest that Apple consider adding a hash key to use when making calls on Apple Watch, you can do so here:
-
is there any equivalent code for this?
Hi, I am doing a project on steganography, but I'm stuck on the bitmap byte array conversion.
There is no problem for the code to run in the desktop. Is there an equivalent code for the following code in BlackBerry JDE (for OS 5)?
Private byte [] imageToByte (BufferedImage img)
{
WritableRaster raster = img.getRaster ();
DataBufferByte buffer = (DataBufferByte) raster.getDataBuffer ();
Return buffer.getData ();
}Review Bitmap getARGB (...) method.
Here are some examples of documentation of Bitmap code form:
Original image bitmap =...
int [] argb = new int [original.getWidth () * () original.getHeight];
original.getARGB (argb, original.getWidth (), 0, 0, 0, original.getWidth (), original.getHeight ()); -
Is there an equivalent command t crs_stat at 11.2 improved?
DB version: 11.2.0.1
Operating system: Solaris
In 10 g 2, we used
to check the status of the cluster. Is there an equivalent reinforced this command at 11.2?crs_stat -t
Order crs_stat has been deprecated in 11 GR 2, no more, use it to determine the user resource state all use them,
+ $GRID_HOME/bin/crsctl stat res - t +.
Also by default ora.gsd is offline if there is no Database 9i in the cluster,
In addition, 11 GR 2 or above, you can use the command to find out the status of the clusterware below process:
+ $GRID_HOME/bin/crsctl stat res-t--init +.
Concerning
Rajesh -
Is there an equivalent of the hearing of equalizing the volume?
Greetings!
I spend a lot of time long interviews publishing, and unfortunately in our studio microphones are set to radically different volumes (not something I can fix easily because of the limitations in our Board of Directors and the way the studio was built). So, I usually fix these differences in sound levels using envelopes of volume expanded in Audition 2.0. I do this either increase the volume of a track or the volume of the clip and then using the automation points envelope to soak if necessary.
This can be really long, and it seems to me that there must be a better way. I tried to use the multiband compressor to Audition 2, but it seems rather unnatural (lots of "pumping" action) compared to the use of envelopes. Help limitation hard, but only to a certain extent - new envelopes do really work more naturally (although it takes so much time to do). I also tried to use The Levelator, but again, it can seem artificial and rather compressed (pumping) sometimes. In addition, it seems not much play with music, if it is present at the interview.
An option that I found interesting is function "Leveler" Audacity. This effect creates passages calm strongest passages and loud muffler - and it seems more natural. I understand that Adobe Soundbooth has a 'Correction of Volume' equivalent function that can match the volume levels within a single audio clip.
So my question is: is there an equivalent function in Audition 2.0 that can do this? If not, is there a VST or DirectX plugins that can do this? Curious to know your opinion.
Thanks in advance for your time!
Sincerely,
Stephen
It's the kind of response that I know people hate doing, but...
Although the use of dynamics processing is certainly the way to correct errors that are already registered, it IS really worth of back to basics and do the necessary to solve the problem at the source in the studio. You mention that your microphones are introduced into a digital mixing console. I'm sure that with a little effort you will find a way out even the levels at the time of registration.
Even if it takes a few hours in advance, thinking about the time that you will save money in the weeks of post-production.
Bob
-
Is there an equivalent of the file properties for BPEL?
Hi people,
I'm new to BPEL (Oracle SOA Suite). I wrote a BPEL process and it has some elements of data that continue to change.
1. a DB connection, which at present is oriented with the DEV instance.
2. an admin e-mail account that points to my personal e-mail ID in DEV.
3. three Notification Email that DEV is my personal email ID
Now it's time for the Production and so I have to change
1. all configurations of the DB adapter as the database will be different (what I could get rid off the coast using data sources)
2. actual Admin email address
3. the actual e-mail addresses of end users
I wonder that there should be a cleaner way to do this instead of going me and all processes of change and reconstruction to deploy to production. From J2EE background is there something equivalent to properties or braids of resource for BPEL files?
I want something that I can set up such that I don't have to change/redeploy/restart the process whenever an end user is changed.
At the moment I use a DB Table to store pairs name / value of these accessories. I know it's a desperate attempt, but it works :)
Thanks in advance,Hi Codean,
You can set the evaluation criteria. Procedure is described in the BPEL Developer's Guide, chapter 19 "deployment processes": http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/deployproc.htm#sthref3366.
In short, you customize the task bpelc by adding custom breakpoint properties to your partner links as it is explained in paragraphs 19.1.3.1 and 19.1.3.2. Our development team have a good feeling on this method of customization. However, instead of using the ant-orapbel-properties file we use the only used separate property file for the endpoints. We also use a link partner by environment properties file (DEV, SIT, UAT, PROD,...), so we do not have to edit these files for each deployment properties.
Kind regards
H -
? Is there a graphics card that will be compatible to my HP Pavilion dv2000 laptop (model dv2419us)?
-This laptop has Windows 7 Home Premium.
-I wanted to take the free update for WIndows 10 - I asked the reservation.
-First reaction has been waiting for downloads would be available.
-Just got the message that it is not compatible with Windows 10 because there a GB Nvidia GeForce 6150 graphics card.
-J' contacted Nvidia on a card that would be comaptible with WIndows 10.
-Response has been that could not recomment a replacement and contact HP.
-Does anyone know if there is a replacement of a graphics card for the HP Pavilion laptop dv2000 which would make it compatible with Windows 10?
... Or is my only option to not upgrade to Windows 10 or buy a new laptop?Hi there @murray62east,
Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you are curious about a replacement of a graphics card.
Unfortunately the graphics cards are not replaceable on laptop HP Pavilion dv2000. They are directly attached to the motherboard. The only way to replace a graphics card would be to replace the entire motherboard.
Hope that I have answered your question.
Have a great day!
-
Is there a documentation about the configuration of the function keys (program)
Is there a documentation about the configuration of the function keys (program).
Dell Dimension 1400, model XP SK8110 keyboard. Yes, I know there are 7 years old, but running like a champ.
Hello
You can use various function keys to activate certain features and commands only. The following list details the current functions keys, what they do, and when you can use them.
Three keys can be used when Setup is loading and when you are prompted to press the F6 function key to install some third-party small computer system interface () SCSI and host controller drivers:
- F5 - for computer type or hardware abstraction layer (HAL) selection
- F6 - to install the SCSI controller drivers and third-party host
- F7 - to run Setup without Advanced Configuration and Power Interface (ACPI)
When the "Welcome" screen is displayed, the following function keys can be used:
- F2 - to automatically start the process (ASR, Automated System Recovery).
- F10 - to bypass the menu screens and to load the Recovery Console
During the GUI (GUI) - Mode Setup, the following function keys can be used:
- SHIFT + F10 - to enable access to a prompt during the installation in graphical Mode
- SHIFT + F11 - to display "old" wizards that give more detail.
Thus, it is not possible to configure the function keys to perform this task. However, you can use your favorite search engine to perform this task.
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
I have Adobe Acrobat 7.0 Pro and I just bought a new pc with Windows 8. I can't find a download. Is there 1 or Acrobat 7.0 Pro compatible and if not, is there a suggestion in addition to spend more money on another product? Thank you.
Hello
According to the system requirements for Acrobat pro 7, it is recommended to use it on Windows 8 machines.
However, you can try to install and run using compatibility mode. You can download it from the following link
Download Adobe Acrobat 7 and Adobe Creative Suite 2
Note: as this product activation server is switched off, you will need to use the key to series mentioned next to the link to download during installation.
For compatibility help please refer to make programs more compatible with this version of Windows - Windows help
-
Is there a plugin raw for Nikon D7200 compatible with CS5?
Is there a plugin raw for Nikon D7200 compatible with CS5?
Hi kariranch
You must use the DNG Converter and convert the files to DNG. This device requires camera raw version 9.0 or higher see cameras supported in Camera Raw
Download link for Dng converter Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.1.1
Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.1.1
Concerning
~ Assani
-
I can't run Flash Pro CC on windows XP? There is an older version that is compatible?
I try to install Flash Professional CC on my old computer (Yes, I know windows XP is outdated, but my new computer broke...) but it keeps saying its not supported. I want to know if there is an older version that is compatible I download (a 30 day free trial is fine), such as CS5 or CS6. Help, please! A download link would be great.
* Note: I can't find an old version download link anywhere.
Make your choice...
You can download the demo version of the software through the pages below the link.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
CS6 is always sold if you do want to have more than the trial...
-
Hello.. I'm from the programming, but new to actionscript. I would like to ask if there was a library where all built in functions, methods, and events can be searched. As for VB, MSDN (of Microsoft Developer Network) used to be there. More than once it happens that I write a few lines of code, but a built-in function already exists for the same thing. Is there a way to check it out ahead of time?
An online resource are QAnywhere® to Adobe ActionScript 3 (AS3)
-
Hi all! I'm new in this forum, as well as in the use of Muse. I ask if there is a sequence of steps o specific function to convert the Fund size tablet and phone Web site.
Y does it can someone help me? Thank you in advance to all
Good bye
Hello
I would say to start from this article
How to create a mobile website with Adobe Muse | Adobe Muse CC tutorials
Let me know if you have any question.
-
Is there a way I can find the AUTHID set of PL/SQL?
If I am logged in as A user and I have a query a view that calls a function of authid DEFINER belonging to user B, and it called as a function of the user current authid owned by C that I am not some priivileges of the user whose second service runs under. I think it should be A but y at - it a routine system that I can call that tells me for certain that it is?
Keith.Is there a way I can find the AUTHID set of PL/SQL?
You can view the current_schema:
SQL> create or replace procedure p1 authid definer as begin dbms_output.put_line ('P1 :' || sys_context ('userenv', 'current_schema')); end p1; / Procedure created. SQL> create or replace procedure p2 authid current_user as begin dbms_output.put_line ('P2 :' || sys_context ('userenv', 'current_schema')); end p2; / Procedure created. SQL> grant execute on p1 to scott / Grant complete. SQL> grant execute on p2 to scott / Grant complete. SQL> connect scott/tiger@oracle Connected as SCOTT@oracle SQL> exec michael.p1 P1 :MICHAEL PL/SQL procedure successfully completed. SQL> exec michael.p2 P2 :SCOTT PL/SQL procedure successfully completed.
-
I'm doing a site compatible for Firefox, but the element.style ['CSS_to_change'] doesn't seem to work (example: document.getElementById('element_ID').style [' - moz - transform "] ="rotate (90deg)"; must turn the item whose id is 'element_ID' at 90 degrees). It works in Google Chrome and I wonder if there is anything equivalent with it in Firefox...
I'm sorry if I ask this question in the wrong place and I thank you in advance! Please let me know when you have an answer.Try this:
document.getElementById('element_ID').style.setProperty('-moz-transform','rotate(90deg)','');
javascript:void( document.getElementById('question').getElementsByTagName('IMG')[0].style.setProperty('-moz-transform','rotate(180deg)',''));
Maybe you are looking for
-
M251n: M251n factory reset does not end
Hello unlinke other questions, I have access to the Panel to reset the default printer. But when I do (and confirm with OK) it says "Please wait" and the lower led (the one next to the incomplete circle) flashes - and that's all. Not reboot, nothing
-
KB2760411, KB2760588, but now "can NOT CONNECT to" SQL Server!
Today I faced with the same Windows Update problems as many people - with KB2760411 and KB2760588 constantly reinstall - and try to resolve which included several reboots - system()) BUT now... a serious problem on one of these machines: cannot acces
-
Net 51 with a view system error I have two boxes of Windows XP that I login as administrator account. I was able to synchronize files, map network drives and can do a tracert to reach one of them. However, when I perform a net view on, I get the foll
-
Clicker:Win32 / YAbector.B Trojan that partially removed how to completely remove
I ran the Windows Security Essentials scan and the results were this Clicker Trojan: Win32 / yabector. B was infect my PC and has been partially deleted how do I completely remove this problem
-
Original title: when I try to send a document as an attachment word, I get an error message "Error" unspecified, then he said: something Microsoft_Exchange. Compatibility mode is disabled, when I go into properties. __ This is a new computer with wi