Is there anything to replace the HopStop?
I used HopStop all the time. I'm literally lost without her. Y at - it site or an app to replace? I live in New York. Thank you.
Tags: Mac
Similar Questions
-
Is there a key combination to use for "cance" to 'replace' the file?
There are lots of small windows which arise and which do not seem to have a combination of keys I can find to replace the mouse. The above example is the case where you want to replace a file during the save operation. The only thing I can find what works is by dragging the cursor over the mini window and clicking "replace". Are there any key combination?
In this dialogue, and others, the second option (in this case, 'Replace') are selectable by pressing the space bar.
-
Is there a problem with the site? I'm unable to purchase/download anything.
Is there a problem with the site? I'm unable to purchase/download anything.
For accuracy, I'm not on the Web site, but my windows desktop program.
-
Pavilion p7-1490, saying: there is damage on the hard disk, to replace or repair
The seriousness with which I must take these warnings? I need to replace the hard drive now, or the computer might just be hypersensitive to a glitch? Could the 10EZEX WD hard drive potentially months or years more without a major problem? (The computer is only 16 months old.)
Hard drives are not 'rich' as they did and he must now tend to fail early. The reader could last for hours, days, weeks, months or even years... There is simply no say. If you want to have a reliable computer and do not want to take the risk of data loss, your best choice is to replace the disk as soon as possible.
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
For about a month now in the monitor display is fade. Is there anything I should do?
Original title: Discolured display
For about a month now in the monitor display is fade. Is there anything I should do?
Hi Yahia,
1. is the monitor of the entire area is discolored?
2. how old is the monitor?
3. What is the number of brand and model of the computer graphics card?
I suggest that you download and install the updated driver for the graphics card on the computer by visiting the computer manufacturer or the manufacturer of the card manually Web site.
How to manage devices in Windows XP
http://support.Microsoft.com/kb/283658
If the previous step fails, then connect the monitor to another computer and check if it works, it's to check if the monitor is that went wrong.
-
After replacing the black ink cartridge, I cannot print and the printer does not recognize my action. I had a printer who worked three days ago and now with the diagnoses, I wonder to load Smartweb print disc which I did not.
Can I get a support phone number to get this problem resolved?
Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).
-
Is there anything the equivalent of NSUserDefault in QtCore or Cascade of BB?
Is there anything the equivalent of iOS NSUserDefault QtCore or Cascade of BB?
It has QSettings. Please see this thread for more details:
-
Consider replacing the battery? There is a red x on my battery icon.
I have a hp pavilion dv6000 and recently upgraded to windows 7 32 bit. There is a red x on my battery. I was wondering if I need a bios upgrade? I'm not sure. Help, please.
Rated capacity 88800 Full last Charge 31731 Hi Philippe
These nubers show that the battery of your computer has about 35 percent of its original charge capacity left.
It is the threshold of 40% and warns against why you receive who "consider replacing your battery."
Until you can replace the battery, make sure that you do not all essential functions such as upgrades of Windows, installation of programs, creating a backup, or by using the system restore, unless the computer is connected.
Concerning
-
I've updated the plan of the photographer and since the download, I had problems with non stop with fluidity and now the bridge is not displayed large previews, a few thumbnails. I restarted and reset the tool, is there anything else I can do or do I cancel my subscription to the CC and return to the CS6?
The problem of fluidity can be the result of a graphics card problem:
Try to uncheck the box in the preferences > performance > graphics processor use, then by restarting Photoshop. If this solves the problem, check with the manufacturer about a possible update.
On the bridge: when you select an image and press the space bar, what happens?
-
Everytime I open the creative cloud it does not load. Is there anything I can do about it.
Hi Priscilla,.
Please refer to the threads below where this issue has been addressed:
New application Cloud Creative unusable: it is empty!
Creative cloud is empty window why?
Re: Empty opening creative cloud app
Kind regards
Sheena
-
Is there a good way to replace the text "See basket" by another text?
I have a big problem, I'm still stuck with that, I hope someone can help me.
I need to change the text "See basket" in the cart summary module. I learned that I can do this with javascript: http://forums.adobe.com/message/4409239#4409239
But there are problems:
When I use this javascript:
" < script src =" https://AJAX.googleapis.com/AJAX/libs/jQuery/1.7.2/jQuery.min.js "type =" text/javascript"> < / script > "
< script >
$(function () {})
$(".cartSummaryLink").text ("Afrekenen");
});
$(function () {})
$(".cartLink").text ("Winkelwagen is alone");
});
< /script >The 'see the basket' is replaced by 'afrekenen.
BUT:
- When I add another product to the presentation of big product the text "see basket" is back...
- When I delete a product in the basket the text "See basket" is also back
- When I refres page the text "See basket" is replaced with "afrekenen.
So I thought to use javascript to refresh the page when a product is added:
< script type = "text/javascript" >
function AddProductExtras() {}
document. Location.Reload (true);
}
< /script >This works, but you can see that the text changes from 'afrekenen' to 'view basket' and "afrekenen" as the page is again a regeneration which is not a very good solution. So here are my questions:
- Is there a better work around?
- If not, is it possible that when a product is removed from the basket page can also be updated?
Thank you
Frank
Hi Frank,.
I suggest that you use CSS and replace the basket with an image. The following should help:
{a.cartSummaryLink}
background: url(your-image.png) 0 0 no-repeat;
Width: 120px;
height: 27px;
vertical-align: middle;
display: - moz - inline-block; / * for Firefox * /.
display: - moz - inline-box; / * for Firefox * /.
Display: inline-block;
text-indent:-9999px; / * mask the text * /.
}
See you soon,.
-mario
-
Is there a way to replace the series I use?
I was using a student permit until the last few days and now bought a lot. Is there a way to replace the serial and more key reinstall the plug-in?
Thank you.
With the plugin the first raise after deactivation takes you back to the mode of trial in silence.
If you raise again if she must invite for a new SN.
-Chris
-
I have a wired to the internet using my base station for 4 expresses the hard extreme airport. I want to replace the base station with a time capsule.
It is also easy to replace the existing base station and adding the name of the network and the password?
You should be able to transfer your configuration of your current access point to new, and then you would just set up the internal drive, try to look at these articles:
ith-new http://www.TechRepublic.com/article/apples-Airport-extreme-out-with-the-old-in-w.
-
System:
E Machine T5086
Vista Home Premium 32 bit SP2
Intel Pentium 4 3 GHz
2gigs RAM
MOBO: 4006173RIntel (Coryville 2) 945G Motherboard
Wireless card: Hawking HWPG1 device name of PCI card wireless 802.11 g: Ralink RT61 Turbo Wireless LAN CardBackground:
I recently installed a PCI-E ATI Radeon HD4650 gfx 1gig card. Unfortunately, with the fan attached, it's a bit too thick to sit safely far from my wireless card that is located in the upper part of the PCI slot. So, I took and it goes down a slot. (I have only 2 pci slots, a pci-e). The card is recognized, the drivers are installed, it is part of the work, there is no conflict, no exclamation, nothing in Device Manager. However, the internet does not work, and he recorded as "disconnected" or "disabled" in the network and sharing Center. So, when I look for to connect to networks, none never appear. I have other computers in the House. Wireless works fine on all others, showing our fine network. The card worked previously above the slot without any problems and always done if I put it back in there. -I don't understand the pci card is a little old, however, the way it has worked well in the first period, I don't want to buy a new wireless card, only to have it also not work in slot 2. It is very possible, there just a problem with this slot, not sure how determine that. Looking for a Windows hotfix.Also: No. I am not return my gfx card for a 'thin' (which also means diminished gfx capabilities). : P if there is really no viable, I'll get a good wireless USB adapter, however if someone of you recommend.
Troubleshooting based on other threads:
*. Tried to change all the settings in the pci bios. There is nothing to resolve. My particular bios does not have very many parameters to set except the activation or deactivation of devices General.1. I uninstalled the drivers and the software wireless is related (through the Uninstall/Change & Device Manager), then allowed the system to detect and ask to install it again in the same session. (I have a configuration saved in my folder for download from hawking.)
2. uninstalled wireless again. Restarted. Reinstalled.
3 uninstalled. Stop. Out of the wireless card. Starting without a card. (idk why) Stop. Return the card. Started & reinstalled.
4 uninstalled. Starts in Mode safe. Reinstalled.
5 documented IRQ settings. IRQ 22 is used by my wireless card and the "High Definition Audio". So tried combinations of uninstalling/disabling audio through settings manager & bios of the device, uninstalled audio software and then installed the wireless card (Eitherway, both devices specify "no conflict" while two permits.)
6. check my diary of events for apparently relevant errors. Don't know what than a bunch of other things from the East, but is "WARNING: autoconfiguration WLAN Service stopped successfully." So, who researched and tried a few corrections: cmd > netsh > wlan > set autoconfig enabled = yes interface = "wireless network adapter" I get "no such wireless device found." I also tried with "wireless network connection" that I got the same error.
7. in respect of the above, I tried cmd in admin mode > sfc/scannow > came into services to start the wlan. But these instructions fail because it is already started / auto services.
8. Finally uninstalled all my ATI software and released the gfx card. Also uninstalled the wireless. Restarted. Re-installed the wireless.
9 tested back in first Pci wireless. Works. Put back in place in the 2nd, does not work. Gfx card is always out ATM plugged into a cable LAN to have internet at the moment. I was surprised that winupdate found a update for my wireless card, but I have install the driver was the one I used when remembered first install the card waaay back when. Eitherway. Updated. It still does not.
10. I tried through the Hawkings own connection utility: "Utility of zero Configuration." "passage" to zeroconfig fails or seems to do nothing. ZeroConfig also register my card wireless as "disconnected."
About to give up because I'm not sure what I can try. I read on attempt to failover to ACPI standard, but I don't have the windows cd. Other methods to do it without the CD and by Device Manager were futile because the options were there to do. The purpose of the level crossing was to attempt to circumvent the automatic IRQ assignment in case that is the question, I'm going to.
Thanks in advance to anyone who can give an idea. Clues or comments are appreciated just to help me to work along, even if we don't find the right solutions. There are quite a few others "hit my 2nd slot, no internet wireless ' sick out there. Hope that eventually you will help all out.
Hello
It's probably the shared IRQ that creates it.
Get a wireless connection of USB you can connect with a USB extention cable and place it over the system and it should work.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Satellite L50D - Boot problems after replacing the hard drive
I just upgraded my hard drive of the pathetic crod 5400 they provide to a SSHD@7200rpm, but now have a major issue.
I initially image the operating system from the old hard drive to the new drive and have had chronic start-up problems (1-3-4 attempts to start to succeed if it fails at any time (often to the Toshiba start screen)).
I reinstalled from a drive under Win 8.1 plain own ENT (trying to avoid the bloatware) and it is exactly the same number and is what I used to format the laptop very well with previously and had previously worked.
I tried reformatting and reinstalling (by removing all partitions on each attempt) to the CSM, unsafe UEFI and UEFI secure. MCS is a straight line never works not proceed and both UEFI methods have the same exact result.
I tried with original restore disks and it seems to work (not had time to fully test) but I don't want the bloatware and it shouldn't be serious since, if I were a customer who forgot to make restore disks (too often) and just have to have a failed hard drive or replaced sacrificed the laptop would be now a door stop.
This seems as bad as Apple to lock people in.
So I would appreciate ideas of people to please, I don't know if there is a program that is supposed to take place on a new drive as PS3 etc (I doubt it), but that leads me into the wall, and will be the last time that I consider Toshiba as anything other than a joke, if there is no solution.
I had to replace the hard disks many times in my previous Toshiba laptops and were devoid of this crod, it has something to do with UEFI which seems more a nuisance than a help right now.
TIA.
Hello
In my opinion, you should first check if the startup problem is related to the new installed HARD drive or new installed system.
You said that the laptop fails to start up often to the Toshiba start screen.The splash screen appears during the POST (power on self-test) procedure. During this test, the material will be checked.
I m wondering if the hybrid SSD/HDD isn't recognised by the BIOS during this particular step.From my point of few, this could be the reason why the system cannot be started.
Another important note:
The 8.1 win requires enable start secure as well as the UEFI boot mode.
Therefore, you must enable both options in the BIOS.Last but not least check if you are using the latest BIOS version as latest firmware for the hybrid SSD/HDD
Maybe you are looking for
-
Plug-ins have been disabled
-
How long should the Satellite A215-s7422 work?
I have a simple (not to me) question: how long should work the laptop?
-
How to connect e xperia to bravia screen mirror kdl47w804a
mirroring of the screen
-
How to remove "Graphics" copper copper
Hello! How I cut out the plan copper? When I use the normal function of the polygon, there is always a small chain copper all around the polygon and parts. Using the Dungeon/Keep-out tool, I get errors when I put on parts/vias/nets... What is the cor
-
I have a laptop HP with XP pro. I have a network with 2 computers laptops (Dell and HP), 1 office and 1 DP300U DLINK print server with a static IP address. I use a LINKSYS WRT110 router. Everything is connected through this router. I can ping ALL lap