Is there a problem with the site?  I'm unable to purchase/download anything.

Similar Questions

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Is there a problem with the server of Combat Flight Simulator 3?

  Is there a problem with the server of Combat Flight Simulator 3? I can play online because I can connect to the internet.

  I have READ 651,2 Kbps. someone helpme?

  Hi Roy sanchez,

  Thank you for using Vista answers Forum.

  What happens when you try to play?

  Here is a link to a few known issues with Combat Flight Sim:

  http://support.Microsoft.com/kb/331570

  I'm not sure of CFS, but most of the game servers are hosted by the players.
  You can check with your preferred server host to see if they are experiencing problems.

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• My purchase is that creative cloud is a ° 16034007400 at the date of renewal, there was problems with the credit card, but the tax has been paid in January. So far I can't use the program or any of its components without Adobe me any explanation on why I

  My the purchase is Creative Cloud is a ° 16034007400 at the date of renewal there are problems with the credit card, but the deposit was paid to January. Up to now I can not use the program or one of its components without Adobe me any explanation on why I can not use.
  Why not allow Use Adobe Creative Cloud?

  : Contact support from adobe for hourly pst by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Is there a problem with the addition of a Wordpress blog on my site of Muse?

  I would like to add a blog to my site, but noticed that there have been a few discussions where people were unable to add a Wordpress blog on their site of Muse.

  Hello

  You can try to add a wordpress blog to your Muse site. You should be able to do. There will be no problem with its features (you may need to work more on the design part - it's just in case there is a problem with the wordpress code and the code generated by the Muse in the backend). Please also have a look at this related posts: http://forums.adobe.com/message/4825190

  See you soon,.

  Parikshit

• When I try to play a game online a page appears saying certifcate theres a problem with the security of websites and it will not connect to yahoo messenger

  Im trying to sign on a MSN chat game when I do a page appears saying that there is a problem with the security certificate from the Web site.

  It gives you three choices

  leave the Web site

  continue to this website (not recommended)

  more imformation

  When I click on continue he don't go to the game it won't let me play and a page comes up saying (open ports)

  also when I try to log in to yahoo Messenger, a message pops up saying

  We cannot connect to yahoo messenger

  then he gives me a choice of output or troubleshooting

  When I use troubleshooting, it is said that there could be a problem with your internet connection

  I have listed these two items because they were both working at the same time now their not.

  Any site, I try to get shows this message cerificate

  I did a scan on my computer and it says (fichier-\device\mfeavfk01.sys) (masked driver infection)

  so im collecting it is all related to the same problem

  Hello

  1. what browser you use to play games online?

  2. If you are using Internet explorer, version of Internet explore you use?

  Method 1:

  If you use Internet Explorer, I also suggest you to see link and check.

  "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

  http://support.Microsoft.com/kb/931850

  Method 2:

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  If you are facing any issue links to the yahoo Messenger, I suggest you to contact yahoo messenger support forums and check.

  http://help.Yahoo.com/communities/index?page=forums

• Is there a problem with the maximum size of the RAM for Satellite 320CDT?

  I have a 320CDT Satellite with the latest BIOS (v8.00) and Windows 98 Second edition installed. There are 32MB memory base and a 32 MB module in the single expansion slot. If I change it to a plug-in 64 MB I see that 64 MB of total memory reported, not 96 as expected; the specification for the machine indicates that the admissible maximum memory is 160 MB (32 MB base + 128MB expansion). Does anyone know if there is a problem with the maximum memory size for this model and if there is a solution or workaround? I need to know quickly, in order to decide if I should return the memory module to the vendor! Thanks a lot for any help, Peter

  Satellite 320CDT supports an internal memory of 32 MB and a single slot can be used!
  You can improve it to max 96 MB (32 + 64 MB)
  I found a few old memory modules. You can use the modules SODIMM 144 pin EDO PA2043U 32 MB or 64 MB PA2044U

  Greetings

• photos of the iPhone are on the side and I can not turn because theres a problem with the property file

  Photos imported from my iphone came on the side and when I turn and try to save, it won't let me save it like that saying "windows Photo Viewer cannot save changes to this picture because there is a problem with the pictures of file properties". What should I do?

  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• problems with the site map

  Hi all

  Ive been trying for hours and Im stuck again. I wish I could call for bc and talk to someone live. I would pay 200 months for this.

  in any case, here's my problem.

  I ran a test of sitemap webmaster tools and it worked fine except that he say I have 32 questions where sitemap URL is blocked by a robots.txt file

  I then went to my sitemap.xml sites http://www.hashems.com/sitemap.XML and copy and paste the URL that I thought I might have a problem with my browser.

  The plan of the site gave me shows URLS that are no longer valid. I changed a few names of URLs for SEO purposes.

  Example of

  http://www.hashems.com/store/coffee/hashems-signature-blend-60-light-40-dark-roast-16oz

  has been changed to

  http://www.hashems.com/store/coffee/hashems-Turkish-coffee-60-light-40-dark-roast-16oz

  But my Sitemap still shows the old URL which, due to my change them are now broken. The < changefreq > is every hour, so doesn't mean that my new URL should appear?

  And is there a way for me to see exactly what 32 urls are blocked by robots?

  Help, please

  www.hashems.com

  Hello

  The sitemap file regenerates every 24 hours. The task that runs every day will pick up the changes and update your sitemap.xml.

  See you soon,.

  -mario

• I just got my computer from Vista to Windows7... Problems with the sites game requiring shockwave remains... Get knocked off line every few minutes... What can I do to stop this? __

  I have problems since I changed my computer from vista to windows7... Sites game requiring shockwave remains... I get knocked off line every few minutes... Why? How can I stop this?
  

  Hot4Lefteris,
  The first thing I would say (if you have not already done) is to ensure that you have the latest version of Shockwave installed.  If you have still a problem, I would like to run IE without Add-ons and then put only the module Shockwave Player and the test.  Also, follow the other steps listed here and post back with the results.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a problem with the latest update of Windows for Vista (January 13, 2016).

  After installation of 10 updates by restarting, through phase II and restart again my display driver stopped working so there is nothing on the screen. The disc did something for about 20 minutes, but there is no signal on the screen (yellow light instead of green).

  I had to do a restore, but Windows guard eager to make the same update, leaving me in the same position with no display.

  What should I do?

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  _____________________________________________

  Here's how to change the update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Problem with the site display in IE

  I'm trying to put together a site (www.4keys.ca).  Everything works well in Firefox, Safari, and Chrome, but when I try to see things from IE to jumble.  I've set up my Mac computer's site. Anyone know what could cause this problem with IE and how it can possibly be solved?  Thanks for your time.

  See no difference, it comes out the same in Explorer, probably a version pb... but you should really try and use div instead of table and have your css in a separate file, it will be much simpler and to highlight the issues less browser

• I'm having a problem with the files linked dynamically unable to be discovered in 2014 CC Dreamweaver with Wordpress.

  I'm following a course of Lynda.com to work with Wordpress via Dreamweaver.

  I installed a local test via MAMP server.  Several times.

  I get to the State where I can load the file index.php from Wordpress without problem in DW.

  But when I click on the button find to discover dynamically related files I get an error 'dynamically-related files cannot be solved because the site definition is not correct for this server".

  I went on all stages of installation via MAMP and Wordpress installation and configuration of a DW site.  I can't find what I'm doing wrong.

  I searched the internet and have seen that it is a common problem but it cannot get specific steps to correct this.  I saw a discussion there re this 3 years, but the steps are exactly what I did.

  So I really need help!

  Thank you

  Sandy

  Hi Nancy,.

  I solved the problem.  I went to WordPress permalinks settings and changed to the default setting as WP set up automatically for something else.

  Now I see all the dynamically linked pages in DW.

  In all the messages in the forums, they declare to change the permalinks.  But don't tell you how to get there and what to take.  Why leave out this important information?

  Ugh!