Is there real problems leaving the production as a 'full of APEX development environment?

Similar Questions

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Problems with the product key

  I have a mac book pro which has a partition with windows 7 pro (I SOUL, in the way that you need to restore the computer whenever you need to use the window). I installed fusion 3 for both systems without having to restart. I deleted the partition and tried to reinstalled the window. now, I have a problem with the product key, what can I do?

  Hi Lumareli,
   
  What is the error you get when you enter the product key?
   
  If you have difficulties to activate Windows 7, open the Windows Wizard of Activation in Windows 7 to use the phone and activate Windows:
   
  Try this and wait for a real person and explain what happened:
  
  a. Click Start, then in the Find box type slui.exe 4
  b. press enter on your keyboard.
  c. Select your country.
  d. Select the telephone activation option, then call and hold to a real person.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I want to reformat my PC, my problem is the product key. It was damaged by the fire, I can it acquire again and how?

  I am a victim of the fire later in June 2011. Now I want to reformat my PC, my problem is the product key. It was damaged by the fire, I can it acquire again and how?
  

  Original title: product key problem
  

  If the license is still installed, follow these steps:

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

• Is there a problem with the site?  I'm unable to purchase/download anything.

  Is there a problem with the site?  I'm unable to purchase/download anything.

  For accuracy, I'm not on the Web site, but my windows desktop program.

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Is there a problem with the server of Combat Flight Simulator 3?

  Is there a problem with the server of Combat Flight Simulator 3? I can play online because I can connect to the internet.

  I have READ 651,2 Kbps. someone helpme?

  Hi Roy sanchez,

  Thank you for using Vista answers Forum.

  What happens when you try to play?

  Here is a link to a few known issues with Combat Flight Sim:

  http://support.Microsoft.com/kb/331570

  I'm not sure of CFS, but most of the game servers are hosted by the players.
  You can check with your preferred server host to see if they are experiencing problems.

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• My purchase is that creative cloud is a ° 16034007400 at the date of renewal, there was problems with the credit card, but the tax has been paid in January. So far I can't use the program or any of its components without Adobe me any explanation on why I

  My the purchase is Creative Cloud is a ° 16034007400 at the date of renewal there are problems with the credit card, but the deposit was paid to January. Up to now I can not use the program or one of its components without Adobe me any explanation on why I can not use.
  Why not allow Use Adobe Creative Cloud?

  : Contact support from adobe for hourly pst by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Active Directory can authenticate to the APEX development environment

  Greetings,
  
  Environment:
  Apex Version 4.0.2
  Database version: 11.2.0.1
  WebLogic 10.3.3
  Listener of the apex
  
  Is it possible to use Active Directory to authenticate access to the APEX development environment? I have all the individual applications using Active Directory authentication, but I can't find a way to integrate Active Directory to access the development environment.
  
  Thank you
  Larry

  Larry,

  No, you cannot change the way in which the APEX Application Builder authenticates users.

  brgds,
  Peter

  -----
  Blog: http://www.oracle-and-apex.com
  ApexLib: http://apexlib.oracleapex.info
  BuilderPlugin: http://builderplugin.oracleapex.info
  Work: http://www.click-click.at

• Is there a problem with the latest update of Windows for Vista (January 13, 2016).

  After installation of 10 updates by restarting, through phase II and restart again my display driver stopped working so there is nothing on the screen. The disc did something for about 20 minutes, but there is no signal on the screen (yellow light instead of green).

  I had to do a restore, but Windows guard eager to make the same update, leaving me in the same position with no display.

  What should I do?

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  _____________________________________________

  Here's how to change the update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Problems of the product on the Satellite Pro A200 recovery

  Hello

  I have a Satellite Pro A200. She runs very slowly and sometimes it crashes when I connect.
  Also the homepage was hacked and I tried several anti-spyware and they did not work.

  I have the product recovery disc, but the problem the DVD rom drive stopped working.
  The light is on, but it will not open unless you use the manual unlocking.
  I removed and checked the connections, but it seems okay.

  The CD-ROM/DVD-rom has disappeared from the Device Manager and does not come under the material.
  I tried the system restore, but it won't work.

  Is there anyway that you can use the product recovery software if you start from a USB?

  I tried to restart the computer and choose boot from CD, but it won't give me this option.
  I looked in the bios and only boot options it gives are hard disk, CD rom, land and FDD

  > Is there anyway that you can use the product recovery software if you start from a USB?

  No, this Toshiba recovery disc cannot be copied to USB flash memory and used for installing the OS. I'm afraid that it would work not m.

  But if you have a Microsoft Windows CD, you should be able to create a USB bootable flash stick. In internet, you will find lots of useful instructions step by step how create this bootable USB key.

  But boot from USB flash memory stick must be definitely possible since the BIOS supports bootable devices on:
  Drive floppy USB, HDD, ODD, Network (LAN), USB memory

• When I try to play a game online a page appears saying certifcate theres a problem with the security of websites and it will not connect to yahoo messenger

  Im trying to sign on a MSN chat game when I do a page appears saying that there is a problem with the security certificate from the Web site.

  It gives you three choices

  leave the Web site

  continue to this website (not recommended)

  more imformation

  When I click on continue he don't go to the game it won't let me play and a page comes up saying (open ports)

  also when I try to log in to yahoo Messenger, a message pops up saying

  We cannot connect to yahoo messenger

  then he gives me a choice of output or troubleshooting

  When I use troubleshooting, it is said that there could be a problem with your internet connection

  I have listed these two items because they were both working at the same time now their not.

  Any site, I try to get shows this message cerificate

  I did a scan on my computer and it says (fichier-\device\mfeavfk01.sys) (masked driver infection)

  so im collecting it is all related to the same problem

  Hello

  1. what browser you use to play games online?

  2. If you are using Internet explorer, version of Internet explore you use?

  Method 1:

  If you use Internet Explorer, I also suggest you to see link and check.

  "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

  http://support.Microsoft.com/kb/931850

  Method 2:

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  If you are facing any issue links to the yahoo Messenger, I suggest you to contact yahoo messenger support forums and check.

  http://help.Yahoo.com/communities/index?page=forums

• Why is there a problem with the download of sequels?

  whenever I click free trial for sequels, it keeps telling me, there is some issue... its effects after only if

  Maybe it's a false error that hides the real problem... a 32-bit computer

  You MUST have a 64-bit computer and operating system... What is your computer?

  -http://windows.microsoft.com/en-AU/windows7/find-out-32-or-64-bit

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• Can not activate Win 8 - reports of problems with the product key

  Hi all

  I have just downloaded 8 Win and tried to upgrade my existing Win 7 Home Premium VM, which I run on VMWare Fusion 5.0.1 on my Intel MacBook Pro 2009. I wasn't able to do the upgrade in place - the installer told me that it was not possible to run Win 8 on this machine. Instead, I created a. ISO file and used to install Win 8 in a new virtual machine. Everything works fine, but I can't activate Win 8. The error message tells me that "something is wrong with the product key" even if I could install Win 8 with the same fine product key.

  I called various hotlines MS today but don't have anything got no solid advice. Am I the only one who experience this issue? Is there something I need to pay attention during installation of the virtual machine to win 8? Is it possible to install a fresh VM with a key product upgrade in the first place? I would appreciate any information you might have on this subject.

  Thank you in advance and Bravo,

  Georg

  Hello

  Had the same problem after installing Win 8 Pro Upgrade on Fusion 5. Follow-up to "How to do a clean install on Windows 8 Pro Upgrade VMWare Fusion" here, problem solved (for now).

  http://www.moosooboo.com/tag/clean-install-on-Windows-8-Pro-upgrade-in-VMware-Fusion/

  Good luck

  JKB