is this a bug in the region... selector apex5 during import lose region selector

Similar Questions

• Is this a bug in the xy-Graph?

  Hi Forum,

  I came across this problem while working on this thread (http://forums.ni.com/ni/board/message?board.id=170&message.id=478607#M478607).

  I add values from 0 to 1 to a graph XY-like in the image below. (And only in this way!)

  When the user presses print a chart reference is managed by a subvi.

  

  In this sub - VI, there is another graph XY.

  Now, I copy all the important properties of the MainVI-XY-Graph to the Sub-VI-XY-graph.

  What is happening inside an another sub - VI, but it's not bad. The copy process may also occur within the first Subvi. Just a space saver.

  Then the Image of the Sub-VI-XY-Graph is printed via a method node.

  

  

  What I found is:

  Run the MainVI (Subvi SHOULD NOT BE OPENED)

  Change the scale of the x axis (for example, the scale of the x-axis of 0.0 to 0.1)

  Press on print

  The c:\pic.bmp file contains the chart, but the scale won't be 0-1 0.0 to 0.1!

  

  If you run with the Subvi is showing, it won't happen.

  And if you set the graphic content xy like this:the error does not occur.

  For those who follow me here:

  What's in my mind or IS THIS a BUG?

  Thanks for reading

  Christian

  Properties applied to hidden objects (or objects on the screens that are not open) are usually "noops" for performance reasons. If you think that I misread your description please post back.

  Ben

• Is this a bug in the APEX or miss me something

  Hello
  
  I have a table chr10bug (id number, sample_text varchar2 (4000)).
  
  I use the simple form with a textarea to fill sample_text.
  
  I have a report based on the table above.
  The report query is select id, sample_text from chr10bug. The tab Link's target as a URL. URL is javascript:void (0); and the link attribute has a very simple function
  onmouseover = "Alter('#SAMPLE_TEXT#') '"
  
  Now, my question is when a user hits enter in the instance text box.
  User enters text * user Press Enter *.
  User enters new text
  
  In the reports of the onmouseover = "alert('#SAMPLE_TEXT#')" does not work for recording, where users supported on enter key. " (Actually none of the function that accepts the string works). If we do not press ENTER when you enter data in textarea... the above function works...
  
  
  Example is here...
  http://Apex.Oracle.com/pls/Apex/f?p=32555:1 (report)
  http://Apex.Oracle.com/pls/Apex/f?p=32555:2 (form to enter data via the text box)
  
  
  
  Is this a bug...
  
  
  Kind regards
  Shijesh
  
  Published by: Apex_Noob on November 18, 2010 12:18

  Hello

  Add same Pentecost alias other columns and replace the chr 10 and 13 of this column.
  Select report would be something

  SELECT ID,
    SAMPLE_TEXT,
    REPLACE(REPLACE(SAMPLE_TEXT,chr13),chr10,' ') AS SAMPLE_TEXT_HIDDEN
  FROM your_tbl
  

  Use SAMPLE_TEXT_HIDDEN value on alert.

  I agree that it is not best option

  Kind regards
  Jari

  Published by: jarola November 18, 2010 22:47

  Try also select

  SELECT ID,
    SAMPLE_TEXT,
    REPLACE(REPLACE(SAMPLE_TEXT,chr13),chr10,' \n') AS SAMPLE_TEXT_HIDDEN
  FROM your_tbl
  

• Format for a number field in af:query problem. Is this a Bug of the ADF?

  Hi, OTN,.
  
  Requirement: Format DepartmentId in query Panel
  
  I created a view of criteria of the Employees (HR diagram) table. I have four items in the view criteria called EmployeeId, DepartmentId, Firstname, LastName and all elements including the posting as selectively requiredproperty. Attribute DepartmentId have Format Type of the property UI tips = number and Format = * 0000 * and Auto submit = true.
  But in the user interface, I'm not able to search the af:Query Panel. It works fine without setting the property UI tips Format and Type of format *.
  
  Step 1: Type 123 in the DepartmentId field
  Step 2: Click on the search button
  Error: Please provide a value for at least one of the specified areas
  Error message: http://www.freeimagehosting.net/24d51
  
  Please see the link for downloading the sample application below
  
  http://formatissue.googlecode.com/svn/trunk/FormatTest/FormatTest.zip
  http://formatissue.googlecode.com/svn/trunk/FormatTest (SVN version)
  
  Note:
  
  JDev Version: 11.1.1.5.0
  I use BC ADF and ADF Faces components
  
  All of the recommendations fully appreciated
  
  Thank you
  Jean-Marc Mithra
  
  Published by: Fanny Mithra November 23, 2011 16:51
  
  Published by: Fanny Mithra November 23, 2011 17:21

  Has filed a bug, bug # copied to the end of this thread - edited previous comment, the problem occurs even on release after 11.1.1.5.0.

  Published by: Jobinesh on December 2, 2011 10:38

• During the closure of 2 windows (with several tabs), restore the system does restore properly the tabs in the window of the second. Is this a bug in the new update / all ideas to fix?

  I regularly use 2 windows with multiple tabs of each and session restore would work to bring them all back, but after this last updated the second window restores correctly, with the first non-visible tab on top (only in the menu drop-down) and now the button add a tab on the left (instead of right). Add a button to the tab is not really as far as concerns the other than it indicates other problems with the tabs in the 2nd window. No no not the 1st tab visible is frustrating, because I can't move or also easily navigate. Also, the tabs on the top of the 2nd window which are visible is no longer have the 'x' to close visible, except when this tab is selected. I'm assuming that it is a problem with the new version/update, since this is the first time I encountered the problem, and I closed and restored Firefox several times to make sure it was a recurring problem and not a one-time problem. Any ideas on how to fix would be welcome (except maybe cramming my tabs on a window or it suck XD).

  Thank you for your help. None of your suggested solutions worked, but having just updated to 10.0.2 seems to have solved the problem.

• Is this a bug with the grouping sets?

  Version is the database of Oracle 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  

  SQL> with data as
    2  (select rownum r, 'X' x, 1 n from dual connect by rownum <= 10)
    3  select x
    4       , sum(n) s
    5       , (select sum(1) from dual where dummy = x) t
    6  from data
    7  group by grouping sets (x, ())
    8  /
  
  X          S          T
  - ---------- ----------
  X         10          1
            10
  SQL>  

  Shouldn't the superaggregate row have a 1 in the T column?

  Here's your QUERY with the addition of the GROUPING() function:

  SQL> WITH data AS
    2  (
    3     SELECT rownum r
    4          , 'X'    x
    5          , 1      n
    6     FROM   dual
    7     CONNECT BY rownum <= 10
    8  )
    9  SELECT GROUPING(x)
   10       , x
   11       , sum(n) s
   12       , (SELECT sum(1) FROM dual WHERE dummy = x) t
   13  FROM   data
   14  GROUP BY GROUPING SETS (x, ())
   15  ;
  
  GROUPING(X) X          S          T
  ----------- - ---------- ----------
            0 X         10          1
            1           10
  

  In this case, the value of X is zero because it is a subtotal line. If you look at this statement execution plan:

  PLAN_TABLE_OUTPUT
  ------------------------------------------------------------------------------------------------------------------------------
  SQL_ID  gumphwvgumqc4, child number 0
  -------------------------------------
  WITH data AS (  SELECT rownum r       , 'X'    x       , 1      n  FROM
    dual  CONNECT BY rownum <= 10 ) SELECT /*+gather_plan_statistics*/ x
      , sum(n) s      , (SELECT sum(1) FROM dual WHERE dummy = x) t FROM
   data GROUP BY GROUPING SETS (x, ())
  
  Plan hash value: 1718326399
  
  -----------------------------------------------------------------------------------------------------------------------------
  | Id  | Operation                       | Name | Starts | E-Rows | A-Rows |   A-Time   | Buffers |  OMem |  1Mem | Used-Mem |
  -----------------------------------------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT                |      |      1 |        |      2 |00:00:00.01 |       0 |    |  |          |
  |   1 |  SORT AGGREGATE                 |      |      2 |      1 |      2 |00:00:00.01 |       4 |    |  |          |
  |*  2 |   TABLE ACCESS FULL             | DUAL |      2 |      1 |      1 |00:00:00.01 |       4 |    |  |          |
  |   3 |  SORT GROUP BY ROLLUP           |      |      1 |      1 |      2 |00:00:00.01 |       0 |  2048 |  2048 | 2048  (0)|
  |   4 |   VIEW                          |      |      1 |      1 |     10 |00:00:00.01 |       0 |    |  |          |
  |   5 |    COUNT                        |      |      1 |        |     10 |00:00:00.01 |       0 |    |  |          |
  |   6 |     CONNECT BY WITHOUT FILTERING|      |      1 |        |     10 |00:00:00.01 |       0 |    |  |          |
  |   7 |      FAST DUAL                  |      |      1 |      1 |      1 |00:00:00.01 |       0 |    |  |          |
  -----------------------------------------------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     2 - filter("DUMMY"=:B1)
  

  The value of X is related to the subquery. If X is zero this returns no rows (I'm sure you already knew that :)). I would say it should although confusing behavior. You get the same results if you use CUBE or ROLLUP as well.

• FDM hangs on the screen for editing during import stage

  When users try to import files via FDM, they see on the "Processing" screen... "and it seems to be time or something because it will stay on the screen until the user does something to refresh the screen. He also seems to be a problem when a user attempts to export a map to Excel, the screen for editing also blocks and I see on the side server that the file is created, but the user never receives a prompt to open or save the file locally. I tried both of these processes on the server and this problem does not exist.
  
  Data sheet: Win server 2008 R2, SQL Server 2008 R2, IE 8
  
  I already tried the following:
  
  Checking the settings IE timeout in the registry
  Verified that smart was not installed on the server of web app/FDM
  Verified users are using the correct URL: \\fdmwebserver\hyperionfdm
  
  Any suggestions?

  Check whether the Antivirus Firewall is activated on the workstation as Symantec or Mcaffee

• I think that there is a bug in the function RT Set CPU pool assignments (SMP)

  I'm trying to configure Symmetric multi Processing on a PXI controller which has 2 CPUs.  I check the number of processors using RT get number of processors (it gives me 2).  I have a constant matrix of wire to the RT Set CPU pool allocations function and create an array of 2 elements with system and reserved as the two values (to assign a single processor for my timed loop and the other for "everything else").

  It works, which means it seems to do the assignment.  But if I look at the assignments of Pool Set CPU error line, it returns-2231, "invalid CPU pool settings. Each pool must contain at least 1 CPU. »

  I do not know what that means, or why I am getting the error (I might just "ignore it", but if the error is 'real', which is not supposed to do).  The entrance to the Pool Set CPU assignment is described in the documentation as "an array of enumerations, with an entry for each CPU.  For me, this means 2 entries, which is what I have.

  Does anyone have a rational explanation of what's going on?  Is this a bug?  The documentation is the problem?  I have attached the front (showing the number of processors and the error output) and the (very simple) block diagram.

  Bob Schor

  

  Thank you, Bobby.

  I reread carefully the Note help "Specifies the Set of processors available for automatic load balancing".  Now that I know the 'right answer', I can interpret what is written as planned, but it's not easy!

  It is also curious that, although the previous example has generated error-2231, if we deleted the error (or wired never error line), function has, in fact, affect the system and Timed Structures pool to CPU0 (I have a few 'real' testing code that shows CPU0 with Structures Timed cycles).  Given that the function "does the right thing" even if you specify parameters of 'bad', perhaps it should be treated as a warning, not an error (or otherwise make a mistake of 'real' not assigned to a pool - it also wouldn't hurt to have a less obscure the Error Message, or more explicit "be sure to have at least a CPU explicitly assigned to each system and Timed Structures pools") , maybe in "BOLD".

  This code has no error:

  

  Hereby I give you credit for the 'Solution', but I'll mark my answer as the Solution because it has a photo to help readers who are intrigued by the question and our responses.

• Resize the content of the region to fill the entire region

  I would like to create a layout container which has some of the characteristics of "BorderPane", but without exposing the methods of BorderPane (e.g. setCenter).

  I think that this is to extend the "Region" and set a BorderPane as his child:

  
      class MyPane extends Region {
        private val borderPane = new BorderPane
        borderPane setCenter foo
        getChildren add borderPane
  }
  
  

  The problem is that now the BorderPane will not be resized to fill the region. Is there a way to achieve this?

  It work?

  borderPane.setLayoutX(0);
  borderPane.setLayoutY(0);
  borderPane.minWidthProperty().bind(widthProperty());
  borderPane.minHeightProperty().bind(heightProperty());
  

• Not to remember the last place photo when importing in Lightroom

  I am running Adobe Lightroom CC 2015.6 and when I import pictures I store them on a different HD to the OS which is my D drive.

  Normally, what happens is that Lightroom selects the last location of folder used to store the photos automatically, but since I have updated it keeps defaulting to the root of D.

  Does anyone know how I can fix this apart from changing the situation whenever I have import the photos?

  Thank you!

  Hi MikeyB,

  Please take a look at the similar thread: update of Lightroom 2015.6 forget import location

  Let me know if it helps.

  Concerning

  Tanuj

• Customize the link and the region selector

  Hello
  
  When you enable customization for the regions (end user can hide/show the region), type of region of the region selector is not updated.
  I have the example here
  https://Apex.Oracle.com/pls/Apex/f?p=39006:4
  
  Lower left corner, click "Customize".
  Hide parts.
  
  Hidden areas are still available on the selector in the region.
  I think that it is not logical that you can select the region from the selector of the region, which is not rendered at all =)
  
  I wonder is this bug, missing feature or customize the link and region selector are not supposed to work "together"?
  
  Kind regards
  Jari
  
  Published by: jarola on December 6, 2011 17:21
  
  Published by: jarola on December 6, 2011 17:34

  Hi Jari,

  I I produced bug # 13476059 - REGION SELECTOR SHOWS AREAS THAT ARE HIDDEN TO CUSTOMIZE the FUNCTION of THE
  and fixed in 4.1.1

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Select the list date picker on a single line - is this a bug?

  I use: Application Express 3.2.0.00.27
  
  Here is a bug? If so, how he reported so it will be fixed in a future version of APEX? If this is not the case, how can I do so it ends as I wish?
  
  1. create the blank page
  2. create html region
  3 create the 'select list' (start on new line - Yes... Span - line field - Yes, ColSpan - 1, 1)
  4. create the date picker component (start on new line - no,... On the ground - No, ColSpan - 1, length of line - 1)
  
  There will be other items displayed in columns more above what I just had create you above. I want the list of selection and the datePicker to show side by side on the same line, so I put the element selector to date on the same line in the same field as the selection list element.
  
  HOWEVER... the date picker eventually displayed in the selection list item (sort of), instead of next to it on the same line.
  
  Here is what I get:
  ...................... [Field selection list] Label date Picker
  Select label list
  ...................... [Date field Picker]
  
  Here's what I want:
  Select the list tag [field selection list] Date Picker [Date Picker field]
  
  Thank you
  Steve
  
  Published by: sskelton on August 3, 2009 11:01
  
  Published by: sskelton on August 3, 2009 11:02

  Hello

  Take a look at my first answer here: Re: problem with the position of the elements of can help you

  Andy

• Cannot change PopUp LOV width and height in version 4.2.5.00.08. I change the values of 450 400 in the Popup list template values (Section of the window), but my function genList0_f07_$ _row (), retains the same settings. Is this a bug?

  Hello

  I use APEX 4.2.5.00.08 to my app.

  I have a region of reports, where I display a column set. A column is the column attribute "display as" the value 'Popup LOV (LOV based query).

  I press the button to retrieve the LOV, I get a popup of 450 x 400 pixels.

  I go to the side of the model and navigate to "Popup list of values of model", where I can see in the section 'Window' attributes 'Width' and 'Height' value 450 and 400. I edit them and save them and there is nothing going on. I'm sure that the template belongs to my selected theme.

  I saw in the HTML source code that is the called function:

  <!--

  
  function genList0_f07_$ _row)
  {
  w = open ("wwv_flow_utilities.gen_popup_list" +)
  « ? p_filter ="+
  "& p_name = ' + escape ('f07') +.
  ' & p_element_index = ' + escape ('0') +.
  ' & p_elem_id = ' + escape ('f07_0000').
  ' & p_form_index = ' + escape ('0') +.
  ' & p_max_elements = ' + escape ("") +.
  ' & p_escape_html = ' + escape ("") +.
  ' & p_ok_to_query = ' + escape ('YES').
  ' & p_flow_id = ' + escape ('114') +.
  ' & p_page_id = ' + escape ('100201') +.
  ' & p_session_id = ' + escape ('16021544706004').
  ' & p_eval_value = ' + escape ("") +.
  ' & p_translation = ' + escape ('NO') +.
  ' & p_lov = ' +.
  ' & p_lov_checksum = ' +.
  ' & p_item_id = ' + escape('-683997768') +.
  ' & p_column_id = ' + escape ('25022622060292812'),
  "winLov,"
  "Scrollbars = 1, resizable = 1, width =400, height =450"); "
  If (w.opener is nothing)
  w.opener = auto;
  w.Focus ();
  }
  ->

  I see that the values has not changed. I also connected and disconnected. I am inclined to believe that it is a bug of the APEX.

  The only solution I think is to replace this function, which is NOT ideal.

  Thank you

  Digital

  The parameters are generated only, nothing you can do about it because it does not use the model for these properties of the couple. Other things work fine for example the names of button or title window etc. I guess that, Yes, it is a bug. It's still there in the apex 5 too, I checked. The default values of the template do not match, the value in the generated code is always 400/450. So I guess it's pretty much a wait on 5.1.

  Here's a fun hack to make it work well on your page (works in apex 5 too, because the code is always the same). Put this in the execute on loading of the page section:

  (function(){
    var _open = window.open;
    window.open = function(){
      if ( arguments[1] === "winLov" ) {
        arguments[2] = "Scrollbars=1,resizable=1,width=500,height=700";
      };
      return _open.apply(window, arguments);
    };
  })();
  

  Change the settings to your liking. This will replace the existing window.open call, which is what the popup lov use and replace it with our own code. It does not interfere with other things. As the name of the new window is always "winLov" for the popup lov, it is the argument that is checked.

  During the call to window.open to open a new window with the name "winLov", parameters are replaced with your own version of it. The window is called as usual, using the stored reference.

  Edit:

  Yes, do not use the trick of resizing. My hack can be a bit tedious, but it's much less invasive for the end user (see open, bam, resize. "Even gets funky on multiple monitors). Also, this thing in the popup lov template will affect each lov popup that you use in the application, which is much less interesting than my specific page code.

  Edit2:

  I did a little digging in the source code, and I don't know why it does not work. Popup lovs are actually equipped to deal with it. My guess is that the parameters are recovered only after that the lists were generated, causing the package variables global to use their default values instead of model parameters.

• onSelect dynamic Action for the region selector display

  Hi all

  Have a problem and need your help.

  I have a page with 6 regions, I show them based on the view of region selector.

  I need some how know what tab is selected, something like an event "onSelect".

  The user then click on the 3rd tab, I need to know and perform javascript code.

  Please help and thank you very much!

  Andrei

  Then click on the event is appropriate.  Your selection in the DA is the problem.

  I was able to do the following:

  Event: click on

  Selection type: jQuery Selector

  jQuery Selector: .apex-rds

  (don't forget the point).

  True "to execute JavaScript Code.

  alert($(this.triggeringElement).find("span").text());
  

  This DA will appear the name of the selected region is within span tags.   The triggeringElement is the anchor tag (a) start clicking. Your code can look at $(this.triggeringElement).find("span").text () and do an if statement to decide what to do on what region.

  Thank you

  -Jorge

• Change the region selector display

  Hello
  
  Is it possible to remove the "show all" in the region selector display? How can I do this?
  
  Brgds,
  
  André.

  See {message identifier: = 10364410}

  Thank you
  Vikram