IS this a known about RIM API bug?

Similar Questions

• Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug? Thank you

  Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug?

  When the same text is seen in another browser, it is displayed correctly as "two."

  The same question is displayed on another computer.

  Thank you.

  Sounds that you use a font that supports ligatures (Palatino?).

  • http://en.Wikipedia.org/wiki/Ligature_%28typography%29

• Is this a known bug?

  Hi all

  I have not met it in the past, but he began to arrive in time on a form that I build. Occasionally, numeric fields change to text fields (either to the opening? or save?). At first I thought it was just a shot of luck or a mistake on my part - but it has happened at least 5 times to varified now. And sometimes, after correction, save and close, when I reopen it the form, the offending field has changed to a text field, new! I'll take a wrong model flag on the field, that me off tips.

  I think that this only happens on the fields that appear in the cells in a table - which probably means nothing.

  Next time I'll check the XML before and after correction.

  With the help of LCD 9.0 on Win7 Ultimate.

  Is this a known bug, or should we say? If Yes, where?

  Thank you

  Stephen

  Hello Stephen,

  Intriguing. I've not seen this.

  You need to connect it as a bug here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform.

  Good luck

  Niall

• How to send e-mails using the RIM api.

  Hi all

  My requriement, it's that I need to develop an application to send e-mail using only the RIM api. Please help me by sending an email using the RIM api. I use version 4.7.0.41 JDE

  Through this Developer's Guide, Section, 'Integrate Messages'.

  http://NA.BlackBerry.com/eng/deliverables/608/BlackBerry_Application_Developer_Guide_Volume_2.PDF

• Content Plazmic could communicate with RIM API?

  I had this problem for a long time and not been resolved.  Hope I can get the result here.

  When you use Plazmic composer, we can create image with some actions or events. But will this .pme file to communicate with RIM API?

  for example, I want to show weather picture of today. This image should include the weather icon and the degree.

  Suppose we use a composer to create this image. Because the degree is dynamic and changing. Is that possible for content plazmic degree as a parameter entry and automatically generate the images.

  It's like the RIM API, we create a screen, add this mediaPlayer with .pme file in this form. Then we have a logic to get data weather degree and put in mediaPlayer and leave it to view the .pme file, which will be the image of time with the icon and the degree.

  Content Plazmic is static in Java applications.  He can't interact with the application (fire events) or y at - it APIs to modify the content.

  If you are looking for to use on a web site and to create dynamic content for the BlackBerry browser, it is possible.  You can export your Plazmic composer in SVG content.  It is an XML file that you can then use as the basis for a dynamic page.

  Version 4.6.0 of the BlackBerry API set also has support for SVG display.  So you could create the dynamic content using these methods, however please note that this requires BlackBerry handheld software version 4.6.0 or higher.

• Something different about the API in a developer vs Production Eloqua?

  I just created a developer Eloqua (with Technology Partner Program of the Eloqua) account and went to connect my application to this developer account through the API.  I can enter my login details, but then I don't see any of my lists of contacts or data of this developer account cards.  I previously worked with Eloqua production accounts and could connect and find lists of contacts and maps of data without problem.  Now, with the developer account I can connect but don't see any contact lists or data cards.  I confirmed that my developer account user has the API security group, and that my lists of contacts and data cards have access read/write for my user.

  Is there something different about the API in a developer account?  I must say Eloqua to activate the API for this account, or is the different API endpoint?

  Thank you

  Scott

  Hi Scott,.

  Could check you if the permissions of security group for the Security API Group provide access to maps data & Contact lists? I do not have access to an instance of dev, but this is the first place where I'd look.

• IPhone 6 IOS 9.2.1 no Service - iPhone regularly says "No. Service" even if its use is in the area of high signal. Must reboot to return to service. Is this a known issue? Any difficulty?

  Regularly receive some 'No. Service' indicator in the signal area hard. Only cure is to reboot the device. So seeing service will show the power of the full signal. When 'No. Service' of course I don't get any calls or messages. Very frustrating to ordinary, look at my phone to see if I have the service even though I know the signal is strong. Is this a known issue? No problems apart from a revision permanently and restart when 'no Service '. BTW, my android friends have no such issue when socialize us physically together. My iPhone is now the target of many jokes. Not funny for me.

  Hello! Have you tried the following?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help. Maybe it's a hardware problem (for example, with the antenna etc.).

  https://www.Apple.com/support/iPhone/contact/

• Just upgraded my iPad 2 (model MC769B/A) 9.2 and it works now VERY slow.  Is this a known problem and is there a fix please?

  I just updated my iPad 2 (model MC769B/A) to 9.2 (13 c 75) and it is now VERY slow.  Is this a known problem and is there a fix please?

  The iPad 2 is the older and less powerful device that can always be upgraded to iOS 9.2. Many users have had success running iOS 9.2 and some have had problems with it on their iPad 2. I would like to start will be all the basic things and then, if necessary, back up, restore settings and restore the backup or restore like new as a last resort.

  Claire Safari. Go to settings > Safari > clear the history and data from the Web site

  Close all applications. Press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close

  Force reboot the device. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  If this does not help, try to reset all settings. Settings > General > reset > reset all settings. No data is lost when you do this, but all the unit parameters must appear again, including the passwords of your WiFi network.

  Reset factory via iTunes

  http://support.Apple.com/kb/ht1414

  If you restore like new, past purchases can be downloaded again.

  http://support.Apple.com/kb/ht2519

• This question is about programming in C. you please help me with a question that is.

  This question is about programming in c. can you please help me with an issue that is -

  Why do we write - printf ("r = c = %d %d sum = %d\n", sum c, r,);

  What we're trying to accomplish here by writing this.

  I also wanted to know why we write things within double quotes.

  The book programming in C I have, gave no information on this subject.

  The way if statements can be nested, of same whiles and fors can

  also be nested. To understand the nested loops how to work, watch the

  program below:

  / * Demonstration of nested loops * /.

  (main)

  {

  int sum c, r,

  for (r = 1; r<= 3="" ;="" r++="" )="" outer="" loop="">

  {

  for (c = 1; c<= 2="" ;="" c++="" )="" inner="" loop="">

  {

  sum = r + c;

  printf ("r = c = %d %d sum = %d\n", sum c, r,);

  }

  }

  }

  When you run this program, you will get the following result:

  r = 1 c = 1 sum = 2

  r = 1 c = 2 sum = 3

  r = 2 c = 1 sum = 3

  r = 2 c = 2 sum = 4

  r = 3 c = 1 sum = 4

  r = 3 c = 2 sum = 5

  In short, in C, a string enclosed in double quotation marks is replaced by a pointer to character to this string somewhere in memory.  The first parameter of a call to printf() is a pointer to the format string and the following parameters replace the % {(quoi que) the characters that appear in the format string.}  %d represents a whole argument of printing.

  HTH,

  JW

• Unable to sign RIM API implementation

  How to sign the .cod files are currently "unregistered" in the following attachment?

  

  Kind regards.

  When you have received the keys to the RIM API by e-mail, you should have received three emails, each with a .csi file. You need to install each of the three files.

• The print menu no longer works since yesterday afternoon. Is this a known bug?

  Hello

  Since yesterday afternoon, it is not possible to print more. If I select the option print in the dropdown menu, nothing more. Until yesterday afternoon, I had the printer menu to select a printer, paper etc., but now nothings happens.

  Please help bc the usual workflow is no longer possible.

  Thanx

  Anna

  Hi all

  Today we released a hotfix that resolves the Mac printing issue that was recently introduced (with May 10 release). If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.

  More details about this release and bug fixes is available here: help Acrobat | Release notes | DC Acrobat, Acrobat Reader DC | Update

  Please give it a try and let us know.

  Thank you

  -ashu

• Bug in the RIM API 4.3.0 - detection PIN message?

  
  

  This feature is broken in OS 4.5 and 4.6 - this has nothing to do with the JDE level.

  If you compile on 4.3 and you run on 4.6, you will see the question.

• Using Framemaker, 2015, when editing, changes are NOT saved even after registration, including when you import new graphics.  Save, and then reopen the document and the old graphics are here and sometimes even old text.  Is this a known bug?

  Steps to reproduce:

  1. open a document in FrameMaker 2015

  2. change the document

  3 save the document

  4 open new document.

  5. unsaved changes.

  Embarrassing especially when doing the import images, old we remains same after the new update.

  Work in progress about-

  change the document twice and then save. The backup file would be the problem? Frame creates several tables backupfile and so the backup must be updated before the primary?

  Try the direct path - updates

• URGENT HELP PLEASE! Windows did an automatic update finished & gave me the Option "restart now or later. I chose Now.A screen from Windows is going down, a startup problem occurred immediately after the installation of updates, this has happened about 9 h

  Windows has finished just do the automatic updates on my Sony Vaio... He said that he should be released on... When it restarted it goes to the ' start windows normally, safe mode, safe mode w/network, safe w/command prompt mode and the last known good configuration "screen... I tried "start windows normally", and last known good configuration, and no matter what I did, it looks like its about to begin, with the 'windows' logo & he says it's the boot process, but then instantly a screen flashes, but too fast for me to read what he says, so I immediately finished fashion splash screen choose again. Whenever I try to get my PC to boot it goes through this again. Exactly... I tried restarting, shutdown PC up to 30 min. waiting & more & again it does the same thing & will NOT start! HELP PLEASE!
  I do not have my current work & News & saved downloads & need help & I timed commitments to people... ASAP PLEASE!
  Thanking you in advance...

  Windows XP logon screen does not appear and the computer continuously restarts
  http://support.Microsoft.com/kb/310396

  Resources to solve startup problems in Windows XP
  http://support.Microsoft.com/kb/308041 TaurArian [MVP] 2005-2010 - Update Services

• Question about field API browser

  I want to use the function of net.rim.device.api.browser.field.HistoryEvent against individual members of a group of fi statements (that are called by action on a ButtonField) so that no browser history accumulates in the standard BlackBerry browser.

  The if - else statements look like this:

  If (field == IMAButton) {}
  Private site = Browser.getDefaultSession ();
  site.displayPage ('http://www.whatever.com');
  }

  The JAVADOC for HistoryEvent reads as follows:

  HistoryEvent

  public HistoryEvent(Object src,                    String url,                    int type)
  

  Constructs a new instance of HistoryEvent for the Remove of URL.

  This constructor assumes that the event is created as a result of programmatic action.

  Parameters: src - Source for this event. URL - URL to add or remove, this story.

  type: Type of event history; must be TYPE_ADD_URL or TYPE_REMOVE_URL. 

  Since: JDE 4.0.0

  _____________________________________________________________________________________

  I am just placing the code at the bottom of each of the code if/else blocks so that the URL is removed from the browser history as soon as it is created but not having luck. (Usually, I get an error complaining that the TYPE_REMOVE_URL cannot be resolved.)

  I searched the forum by using search terms of 'Historic event', "HistoryEvent" and "Clearing browser history", but it doesn't seem to be anything else.

  I tried to use the ButtonField, private, Member Browser.getDefaultSession () &
  site.displayPage as a source for the event - I'm being literal object CBC requirement?

  This is my 2nd request for help. Can anyone give me a suggestion on how to proceed?

  In response to the earlier thread that I posted, I said that it is not possible to use this feature against the standard Blackberry browser, that's why I couldn't get it to work.