Is this Possible? I hope so!!

Similar Questions

• I need to sync bookmarks between Firefox Sync and Seamonkey. Is this possible and if so how?

  I use Firefox and Seamonkey, as well on the same computer and also on other computers. I would like to use Firefox Sync to synchronize bookmarks between Firefox and Seamonkey on all my computers, but I do not understand how to do this, because the browsers seem to use their own separate servers.

  Is this possible and if so can you tell me how to put in place.

  Thank you.

  I understand the confusion!

  I'm not a Mozilla support person, but according to my experience, synchronization must be called Sync in Mozilla, Firefox or Seamonkey Sync...

  If you create an account in Firefox, this account is accessible to Seamonkey.

  According to the instructions of Mozilla in Firefox, you open 'Options, sync, add a device' and in Seamonkey "sync Setup, I already have an account. The text here is a little confusing because you have to read 'I already have a Mozilla sync account', otherwise, you tend to think that it involves a Seamonkey sync account...

  Then click 'connect' and Seamonkey then provides three fields of characters that you enter in the appropriate fields in the dialog 'Add a device' Firefox.

  I think it's confusing that in Firefox, the server is called 'Server of Firefox Sync' and same Seamonkey offers a "Seamonkey Sync Server', which suggests that they are two completely separate entities, not connected.

  I hope this helps!

• I want to vary the speed of a 12v dc fan using a mosfet with a DAQ 6008.Is this possible.

  I am a college project that is to use a data acquisition to monitor and control the temperature. I use a LM35 temperature sensor. I need to control the speed of the fan a12v dc. I use an external power supply of dc 12. I hope to control the fan speed by varying the voltage of 5v to the door of the

  MOSFET. Is this possible.

  Hi shaggydog.

  You can use one of the channels of analog output of the USB-6008 output a variable voltage to the gate MOSFET, this should provide the features you need.

• Is this possible in E10 to extract data from traffic source Web site for a subset of pages on a site?

  I know that there are ways to draw search engine data, data of social media and then the site as a whole, but I'm looking for the ability to find data from sources of traffic for a specified page of a site group. Is this possible in Eloqua 10? Thank you

  Hi Melissa,

  I think that's what you're looking for:

  If you run the report Page Navigations of Insight, you can then filter on "Web Page" choose only the subset of pages on which you are interested to report. The report will then show you all the previous pages (traffic sources) that were visited before visiting an of these subset of pages. The only downside is that it shows it as a 1:1, it will show all the previous pages for Page A, all the previous pages for Page B, etc. - so you can see the same previous page on the list several times. You can export to Excel, however, and twist a little bit for us hopefully get final report wanted.

  Hope that helps!

  Kim

• Hey, I want to stop my subscription Creative Cloud - Photoshop (one - year paid in advance). Is this possible?

  Hey, I want to stop my subscription Creative Cloud - Photoshop (one - year paid in advance). Is this possible? And how?

  If it's subscription month. You can cancel this subscription form your adobe account:

  Cancel your membership creative cloud

  Otherwise please contact support:

  Contact the customer service

  Hope this will help you.

  Concerning

  Megha Rawat

• Is this possible? Subforms appeal based on the drop-down list associated with the database

  I'm hoping to make a dynamic shape and I wonder if it's possible.

  I have a database with about 300 entries - pieces of agricultural goods and a few little bits of info on each of these properties. I want to create a form where users can choose the piece there rather than the property in a drop-down list. Based on the property they select, another menu drop down to fill with the cultures associated with this property. Then based on the selection made in this drop-down list, a specific form will be brought upward.

  For example, a person selects property #102 in the drop-down list. In the database, property #102 is associated with wheat, barley and corn, so the next drop would be complete with these three cultures. The user selects the wheat in the drop-down list and the form of wheat would be called. 

  I hope I explained that well enough.

  Is this possible? And if it's possible, how complicated to do? Assuming that I already have the database and subforms, it would be a long process from weeks to the script, or it would be simple enough?

  Yes, this could be done, here is an example that should help: Drop dependent dropdown (specimen attached)

  On the basis of selection (change event of the second menu drop-down), you can show or hide a subform.

  -Wasil

• Separated - is - PDF generator this possible?

  Hello!

  I would like to install the PDF generator on a dedicated machine, and other components LiveCycle to another machine. How to raise the process mgmt PDF generator location?

  Of course, I can make calls of PDF generator using the web service component. But it seems to be a bad solution.

  Is this possible at all?

  -Jaroslav

  LiveCycle is designed with the hope that all his pieces will reside in the same JVM (being done through consolidation scalability).  If you want to separate components and run separately, then you would have to make certain choices that might not be to your liking.

• Is this possible in Captivate 3?...

  I have Macromedia Captivate 1.0, and it does not have what it takes. I was wondering if upgrading to Captivate 3 would solve the problem. Here's what I would do...
  
  I need to have a screen of 'menu' which would have, say, three "tasks" to complete. The user would choose a 'task' and while they could watch a demo on this subject, or they could try in "test mode". If they pass it in "test" mode (by clicking in all the correct places), then Captivate will somehow it tick (or put a check mark next to it) or something on the main menu with the three tasks. Once all three tasks have been "marked" in Test Mode, then Captivate will pass a variable 'complete' the LMS via SCORM compliance...
  
  Is this possible with the last Captivate? Or other tools would be needed to achieve this? If Captivate 3 alone can handle this, it is a relatively painless process? Thank you!!!
  

  As long as initialize you the SCORM API and the report by using the correct calls, I think not that SCORM care about what was going on within the SCO, once it is launched.

  If you are not interested in the follow-up to the notes of the user and I just want simple, at least you should try scoring mechanism internal to debone Captivate. This assumes that you have correctly configured the LMS to only expect a notification of the completion of each SCO.

  The only way to add custom in Captivate features is to insert as a standalone Flash movie, so you can easily insert a Flash movie on the last slide that will solve your global flag 'complete' for the checkmarks. Identifying uniquely each file to know what box to show could be a stumbling block, but a global variable in your menu would probably take care of that.

  By the way the finished flag back to the LMS seems to be the hardest part. Either you have to build your own full SCORM wrapper or patch in which Captivate provides when you publish on SCORM.

  If you choose to piggyback on the feature of Captivate, pore through Captivate scorm_support.js file and I hope to be able to determine Javascript variables/functions to change.

  In A2, the file is located in:

  C:\Program Files\Adobe\Adobe Captivate 2\Templates\Publish\SCORM_support\scorm_support.js

  Good luck!

• is this possible?

  Here's the situation... My GF installed spyware on my phone, I would like to see if I can allow the tracking by GPS, but do not allow the follow-up... Is this possible?

  If your phone is not jailbroken, it's impossible. It's jailbroken, it is not tenable and therefore safer.

• I have a Mac Book Pro with a CD/DVD drive.  I want to copy a home made DVD.  Is this possible with iMovie or another application?

  I have a Mac Book Pro with a CD/DVD drive.  I want to copy a home made DVD.  Is this possible with iMovie or another application?

  Look for the hand brake.

  It is a free application which can convert your DVD to QuickTime formats.

• I live in the United States and would like to buy a song from the Germany. Is this Possible?

  I live in the United States and would like to buy a song from the Germany. Is this possible?

  Hello

  You can buy songs that are available on iTunes Store for your country.

• I would like to see all the emails of my 3 email addresses different all in one component - as in Outlook. Is this possible?

  I get emails from multiple email addresses and would like to see them all in one place instead of having to click 5 different folders to see what's new in each of them. Is this possible? Any help is appreciated!

  Question in 2014
  
  How can I read my incoming e-mails in a single folder? As I do in Live mail and Outlook express.
  https://support.Mozilla.org/en-us/questions/1009047

  Looks like you need.

  TB - 38, 3 Win10-PC

• Before I float test this thing, all hope for my kernel_task fly?

  I'm at my wit's end. I asked this question before but I had a temporary improvement, but those days are gone.

  I ended up having my machine to grind to a halt when I have any kind of video running, either with EyeTV VLC with kernel_task showing 500 + % CPU utilization (on a side note, someone could explain to me how it works?). Therefore, the video starts stuttering and gets very bad. He made sure that I can't really watch anything on this machine and I'm ready to throw it into the Hudson River.

  Usually it will work correctly for a period of time, in minutes, hours, but then once it starts to get carried away, he castigated for hours, even when all applications are closed.

  Yet once, I ran EtreCheck while this thing has been stolen, what I have here. I haven't run as administrator then if I need to re - run as admin please let me know.

  I am also including a list of crazy activity monitor process screen Cap.

  Any help is always greatly appreciated!

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-07 14:30:36

  Download EtreCheck from https://etrecheck.com

  Duration 12:20

  Performance: Poor

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (retina, 15 inches, beginning 2013)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro10, 1

  1 2.7 GHz Intel Core i7 CPU: 4 strands

  16 GB RAM not extensible

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 107

  Video information: ⓘ

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M - VRAM: 1024 MB

  Cinema HD 1920 x 1200

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since the start time: about 6 days

  Disc information: ⓘ

  APPLE SSD SD512E Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD of B1 (disc 1) /: 498,54 (Go 56,02 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 498.90 GB Online

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  VIA Labs, Inc..          Hub 1 TB USB3.0

  VIA Labs, Inc..          Hub 1 TB USB3.0

  VIA Labs, Inc..          Hub 1 TB USB3.0

  JMicron Samsung P3 Portable 1 TB

  EFI (disk2s1) < not mounted >: 210 MB

  Boot OS X (disk2s3) < not mounted >: 134 MB

  Disk backup disk (DIS3) backup / Volumes / of the B1 B1: 999,49 go-go (236,30 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk2s2 999.85 Go online

  Reader SuperDrive for MacBook Air Apple Inc..

  VIA Labs, Inc..          USB 2.0 hub

  VIA Labs, Inc..          USB 2.0 hub

  VIA Labs, Inc..          USB 2.0 hub

  Hub keyboard Apple, Inc.

  Apple Inc. Apple Keyboard

  EPSON EPSON scanner

  Hewlett-Packard HP LaserJet 1022

  Elgato EyeTV HD

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Thunderbolt of Apple Inc. to Gigabit Ethernet Adapter

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Library/Extensions

  com.Citrix.kext.gusb [no charge] (1.0 - 2016-06-03) [Support]

  / System/Library/Extensions

  com.elgato.driver.DontMatchAfaTech [no charge] (1.1 - 2016-06-03) [Support]

  com.elgato.driver.DontMatchCinergy450 [no charge] (1.1 - 2016-06-03) [Support]

  com.elgato.driver.DontMatchCinergyXS [no charge] (1.1 - 2016-06-03) [Support]

  com.elgato.driver.DontMatchEmpia [no charge] (1.1 - 2016-06-03) [Support]

  com.elgato.driver.DontMatchVoyager [no charge] (1.1 - 2016-06-03) [Support]

  [no charge] tl.uds.netusb.controller (1.0.0d1 - 2016-06-03) [Support]

  Launch system officers: ⓘ

  com.apple.FolderActionsDispatcher.plist [failure]

  [loaded] 8 tasks Apple

  [loading] 146 tasks Apple

  [operation] 81 tasks Apple

  [killed] 2 tasks Apple

  2 killed process lack of RAM

  Launch system demons: ⓘ

  [loaded] 46 tasks Apple

  [loading] 148 tasks Apple

  [operation] 93 tasks Apple

  [killed] 4 tasks Apple

  4 processes killed due to lack of RAM

  Launch officers: ⓘ

  [loading] com.citrix.AuthManager_Mac.plist (2016-01-26) [Support]

  [operation] com.citrix.ReceiverHelper.plist (2016-01-26) [Support]

  [operation] com.citrix.ServiceRecords.plist (2016-01-26) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-01) [Support]

  [operation] org.gpgtools.Libmacgpg.xpc.plist (2015-09-23) [Support]

  [loading] org.gpgtools.gpgmail.enable - bundles.plist (2015-03-08) [Support]

  [loading] org.gpgtools.gpgmail.patch - uuid - user .plist (2015-03-08) [Support]

  [loading] org.gpgtools.gpgmail.updater.plist (2015-09-23) [Support]

  [loading] org.gpgtools.macgpg2.fix.plist (2015-03-08) [Support]

  [market] org.gpgtools.macgpg2.shutdown - gpg - agent.plist (2015-03-08) [Support]

  [loading] org.gpgtools.macgpg2.updater.plist (2015-03-08) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-04-05) [Support]

  [loading] com.disconnect.networklistener.plist (2015-05-31) [Support]

  [operation] com.elgato.EyeConnect.plist (2014-02-11) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-01) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-02-27) [Support]

  [loading] com.omnigroup.OmniSoftwareUpdate.OSUInstallerPrivilegedHelper.6.plist (2016-04-14) [Support]

  [loading] com.skype.skypeinstaller.plist (2016-04-17) [Support]

  [loading] org.gpgtools.gpgmail.patch - uuid.plist (2015-03-08) [Support]

  User launch officers: ⓘ

  [loading] com.bittorrent.uTorrent.plist (2015-07-21) [Support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (04 / 04/2016) [Support]

  [operation] com.pia.pia_manager.plist (2016-02-21) [Support]

  Items in user login: ⓘ

  Quicksilver application (/ Applications/Quicksilver.app)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  EyeTV Helper Application (/ Library/Application Support/EyeTV/EyeTV Helper.app)

  ScanSnap Manager Application (/ Applications/ScanSnap/ScanSnap Manager.app)

  Disconnect the Desktop Application (/ Applications/disconnect Desktop.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Other applications: ⓘ

  [ongoing] 2BUA8C4S2C.com.agilebits.onepassword4 - helper

  [ongoing] com.blacktree.Quicksilver.250592

  [ongoing] com.Elgato.EyeTV.48032

  [ongoing] com.Elgato.eyetvhelper.86432

  com.flexibits.fantastical2.Mac.Launcher [loading]

  [ongoing] jp.co.pfu.ScanSnap.V10L10.63072

  [ongoing] org.videolan.VLC.64992

  [loading] 407 tasks Apple

  [operation] 213 tasks Apple

  [killed] 5 tasks of Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 21.0.0.213 - SDK 10.6 (2016-04-16) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-17)

  Flash Player: 21.0.0.213 - SDK 10.6 (2016-04-16) obsolete! Update

  Default browser: 601 - SDK 10.11 (2016-05-17)

  CitrixICAClientPlugIn: 12.1.100 - SDK 10.10 (2016-01-26) [Support]

  Web of Google Earth plugin: 7.1 (2016-02-27) [Support]

  Silverlight: 5.1.41212.0 - SDK 10.6 (2016-03-08) [Support]

  Safari extensions: ⓘ

  1Password - AgileBits - https://agilebits.com/onepassword (2016-05-25)

  StartPage HTTPS - Surfboard B.V. - https://startpage.com (2016-02-27)

  Unplug Private Search - Eason Goodale - https://disconnect.me/search (2016-03-19)

  3rd party preference panes: ⓘ

  Flash Player (2016-04-05) [Support]

  GPGPreferences (2016-02-27) [Support]

  Time Machine: ⓘ

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD B1: disk size: 498,54 GB disc used: 442,52 GB

  Destinations:

  B1 backup disk [Local]

  Total size: 999,49 GB

  Total number of backups: 44

  An older backup: 08/01/16, 22:48

  Last backup: 07/06/16, 13:30

  Backup disk size: too small

  999,49 GB backup size < (disc 442,52 GB X 3)

  Top of page process CPU: ⓘ

  508% kernel_task

  84% EyeTV

  49% Elgato H.264 Decoder

  49% uTorrent

  22% WindowServer

  Top of page process of memory: ⓘ

  3.31 GB com.apple.WebKit.WebContent (12)

  1.43 GB kernel_task

  508 MB softwareupdated

  EyeTV 295 MB

  262 MB Mail

  Virtual memory information: ⓘ

  2.44 GB of free RAM

  2 pm used GB RAM (6,49 GB being cached)

  37 MB used Swap

  Diagnostic information: ⓘ

  Standard users cannot read/Library/Logs/DiagnosticReports.

  Run as an administrator account to view more information.

  The kernel uses excessive CPU cycles. Here are a few possible causes for the State. Some may not apply to you.

  FileVault

  Please, open the security and privacy pane in system preferences and click the FileVault tab. If there is an indication that the encryption or decryption is in progress, wait (possibly several hours) so he can finish and see if there is an improvement.

  Limitation of the

  When he does readings of high temperature in the material, or a MacBook battery low voltage readings, the kernel can try to compensate by interrupting the processor to slow them down and reduce energy consumption. This condition may be due to:

  ☞ an accumulation of dust on the logic board

  High ambient temperature ☞

  ☞ a defective battery or worn in a laptop

  ☞ the malfunction of a cooling fan, temperature probe, a probe or some other component voltage internal

  Note that if the problem is caused by a sensor, there can be no real overheating or undervoltage.

  If the computer is portable, try with and without the power adapter connected. If pigs kernel_task processor only on current alternative, load is causing the machine to heat up. This behavior may be normal for some models, but it can also be an indication of a hardware failure.

  Apple diagnostics or the Apple Hardware Test, although not very reliable, is sometimes able to detect a fault. For more in-depth equipment tests, an appointment 'Genius' on an Apple Store, or go to another authorized service provider.

  If all goes well with the material, then everything that you can do to improve the cooling can help.

  Software installed

  The software installed by the user which includes a device driver or other kernel code can thrash of the kernel. This category includes virtualization, such as Parallels and VMware software, as well as products 'anti-virus' more commercial. Some system monitoring applications, like "iStat", may also contribute to the problem. You can test this possibility to completely disable or remove the software according to the instructions of the developer or start in safe mode. However, it should be noted that the deactivation of a modification of the system without removing or test in safe mode is not as easy as you think.

  If you do not know what software could contribute to the problem, please hold down the option key and select

  Information system...

  in the Apple menu. The system information window opens. Select

  The software extensions ▹

  in the menu on the left. After a delay of a minute or two, a list of all installed kernel extensions should appear in the upper right window.

  In the extensions list, click the results achieved since twice column header to sort by source, with Apple down. At or near the top, you may see a few third-party extensions. Choose an answer and the information on it, including the location, will be displayed in the lower pane right window. What do you see?

  Corrupt NVRAM or MSC data

  Sometimes, the problem is cleared up by resetting NVRAM memory or MSC.

  External display

  Connect an external display to some models of MacBook Pro while the lid is open can cause this problem. If necessary, use the external clamshell modescreen.

  Other devices

  Disconnect devices wired everything except those needed at startup and remove all the expansion cards of third parties (if your model.) If the problem is resolved, reconnecting devices one by one by one until you identify the culprit.

• 'iPhone has been severely infected by viruses -' is this possible?

  Surf the internet (safari) pops up a window that says that the iPhone has been severely infected by viruses (respectively 7) and I have to follow the instructions to repair the phone. Is this possible or is it a fake?

  JavaScript:;

  No, there is no virus in the wild for iOS. This popup is just a scam to try to get you to reveal personal information. Quit Safari and go to safari settings and delete cookies and clear history and cache.

• Closure of a SELECTION of tabs at once. Is this possible?

  Hi, I'm an average user of tabs. Let's say I opened 25 tabs in a window/session. I want to select 5 tabs to close, at one time, but without using the tabs groups/panorama that I am too clumsy use this feature.  :-) I mean it takes more time to create your groups and then close the group. I would prefer to select my tabs and close them then directly from my window screen. Is this possible?

  See:

  • Multiple Tab Handler: https://addons.mozilla.org/firefox/addon/multiple-tab-handler/

• I am looking to buy a 'new' ipod classic. IPod Superstore claims get the new Apple iPod that Apple is still making them for 5 years, but only to sell them to a few suppliers for resale. Is this possible?

  I am looking to buy a 'new' ipod classic. IPod Superstore claims get the new Apple iPod that Apple is still making them for 5 years, but only to sell them to a few suppliers for resale. Is this possible?

  Probably not still making them, but Apple political is to the service of produced at least five years after they is no longer manufactured and sold

  "Owners of iPhone, iPad, iPod or Mac products can get the services and Apple parts or service providers from Apple for 5 years after that the product is longer manufactured,' which is

  Vintage and obsolete products - Apple Support

  With the iPod, 'maintenance' means often giving you a replacement to pay the off-guarantee fee, which is $ 299 for the last classic model of the iPod, according to this document

  Pricing of the Service - The Apple iPod Support

  So Apple probably has a stock that's enough to last up to five years after 2014 (when the last classic model of the iPod has been abandoned).  This provider is unlikely to be an authorized dealer, as well as the iPod has not perhaps be covered by the standard warranty of one year.  That's why it comes in a regular white box, not a retail box.  It's supposed to be a replacement of maintenance for the iPod classic (latest model) owners.  It can be 'used', but it is still old.  Parts like LCD, HDD and the age of the battery by sitting in a warehouse.