Is - this Windows 7 that freezes the cs5 first?

Similar Questions

• How to open the window Defragmenter that shows the status of the defragmentation operation?

  I was not able to open the window that shows the operation of Defrag in action to get an idea of how bad is the State of my PC Defragmenter.

  Professional XP and previous systems, it opens automatically. In Vista does not work and I was not able to find it.

  Is it Vista? How can I open it?

  1 million thanks!

  Mike, NJ

  Hello

  Vista does not have this option which was under XP to see the progress of the defragmentation.

  Please read this response of mine who helped another person in these Forums:

  The Vista defrag works quietly in the background without intervention on your part

  http://support.Microsoft.com/kb/942092

  In Windows Vista, there are a lot of improvements in the defrag engine and handling of fragmentation. By default, Windows Vista uses Task Scheduler to automatically keep the defragmented hard drive. This Automatic defragmentation does not affect the performance of the Windows Vista operating system...

  If you want to use a much better defragmentation program which is free and where you can see the results, I suggest this one:

  http://www.Auslogics.com/en/software/disk-defrag/

  See you soon.

• Can I use the same product key in a virtual machine that I use for the Windows installation that hosts the VM?

  I have a valid Windows 7 Professional installation as well as a copy of VMWare Workstation running on Windows 7. I would like to install a VM Windows 7 that I can "break" without worrying about my host system. Can I use the same product key for the virtual machine that I currently use on the host system, or do I have to buy a different product key for the virtual machine?

  Thank you!

  No, you will need to purchase an additional license. The virtual machine is considered to be a separate computer.

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  2. INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

• Is there a keyboard shortcut to close this window right click on the task bar

  If I click with the right button on the application and type C, which is the key to lose C will be only, highlight, he shut as it should.
  In older versions of windows, the close menu command used popup exactly under the mouse cursor, and now it seems just above the taskbar button.
  If there is any other element in the menu beginning with C, it could speed up things a bit, and I know most geeks would appreciate.

  Nevermind, I got it:
  Click the button on the taskbar on vista closed the window;
  Click Preview in the taskbar in Windows 7 closed the window;

• I am not able to delete a message in Windows Mail that got the wrong address? Tell me always Windows Mail does not. How can I delete the message?

  I had extra punctuation in a speech, and now it will not send.  I tried to delete the email but it won't let me.  It keeps just freezing and telling me that Windows does not.  I need my Outbox.  Help.

  Check work offline. Can delete you it now? If this is not the case, see this.

  How to remove an Undeletable Message stuck in Windows Mail
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  If still no joy, try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

• KB3057839 breaks the windows services that run the GUI programs

  For reasons of inheritance, one of our tracks to windows service applications a 3rd party tool which is a graphical application in general. but also has command line switches to run in batch mode. The 3rd third party provider does not (and will not) provide a lot of command line application that is stand-alone/separated from the GUI, which leaves us with no alternative at the moment.

  So far, this approach has worked on Windows 7, Windows 8, Windows 8.1, Windows Server 2008 R2, Windows Server 2012, and Windows Server 2012 R2 - regardless of the registry setting 'NoInteractiveServices' in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows.

  But since the installation of the KB3057839 (which relates to the MS15-061) this approach has stopped working and caused the application GUI stuck, to consume 100% of one heart. The only way to get the old behavior is the following:

  1. Change NoInteractiveServices to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows to the value '0' (Windows 8 and later versions; Windows 2012 and later only)
  2. Start the UI0Detect Service ("Interactive Service detection"), defining eventually it starts automatically. and according to the other settings the same set up a recurring task to restart the service (because it stops after a while).

  As soon as UI0Detect is running, the application GUI thaws and works as expected; but also long UI0Detect is running. And since the application GUI does not in fact all the message boxes or similar which require user input, this is the kind of a workaround longshot.

  Uninstallation of KB3057839 Gets the old behavior back, but I doubt that this should be the recommended way of going. And after a search, users also have many problems with this patch.

  We checked on a virtual machine that has been reset to a snapshot prior to installation (where the intended behavior is always given); installation of KB3057839 breaks, and arranges the uninstallation of KB3057839 once again.

  Is this behavior with the installation of KB3057839, or is it a bug/pervert of the fix MS15-061 effect?

  Thanks to Ståle L. Hansen

  KB3070102 (exit 14. July 2015) replaces KB3057839 and will most likely solve your problems.

  KB3070102 / MS15-073: vulnerability in the Windows kernel-mode driver could allow elevation of privileges
  https://TechNet.Microsoft.com/library/security/MS15-073
  https://support.Microsoft.com/kb/3070102

• Can I click on an object in my browser that opens a window on that in the same browser, which is then resealable.

  I have included this site as my reference. Elisa van Joolen. If we scroll down and flat on some images, an arrow appears, you can click and a window opens with a layout or details inside. The window can be closed by pressing the 'x '. I would like to know is it possible in Muse and how would I go about this. This is obviously not a pop-up window outside the browser, its all in a browser. Thank you very much.

  You confuse the ToolTip in the dialogue of connection with the ToolTip Widget's Composition.

  You describe what happens when you use:

  

  That you want to use is:

  

• Don't know what happened, but now, everytime I open a new tab, a new window opens that contains the same information as the tab.

  Don't know what I did, but now, everytime I open a tab, the tab opens as it should, but it ALSO opens a new window containing the same information as my original window. (same tabs, etc.) Almost a duplicate of my original window. I searched everywhere for a solution, but fails.

  Hello

  The reset Firefox feature can solve many problems by restoring Firefox to its factory default condition everything and save your essential information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• is - this windows xp supports for the IDE (PATA)?

  We bring a built-in version of xp, since we are using the old version of the hard drive that resides on the IDE we are skeptical if xp compatible IDE or not?

  Hello
  For your information, please see this link:

  1. http://products.wdc.com/library/um/eng/4779-705036.pdf

  2. http://www.mysuperpc.com/harddrive.shtml
  Kind regards
  Chauvet J.

• PDF this 'grey area' that underlies the interactive article in some readers

  I created a PDF of brochures for a client, and in each of them, I've linked the area to the logo on their Web site. On my screen, it looks great, the cursor changes to a helping hand to the overview to indicate that there is a link. On the screen of the client, however, the logo has a transparent on purple-gray area.

  I can't fix it because I can't reproduce the problem. Someone else was he come? If so, what is the solution? I suspect it is a browser thing, judging by the screenshot he sent. If you have no matter what workaround for this situation, I would be so grateful!

  Thanks to all in advance,

  Mona

  Yes, that sounds like a specific problem of the Viewer. If this is the case there is probably nothing you can do about it.

• suddenly, when starting InDesign, I got this window: "could not load the Indesign because it requires Layout UI.please install available to the interface plugin user and restart InDesign.» I tried to reinstall, it did not help. I use CS4 on PC windos 7. a

  

  Finaly

  I copied the plugin: layout of the user interface of another PC and pasted into my PC to: c: Program Files (x 86) \Adobe\Adobe InDesign CS4\Required

  and ii work!

• New computer with Windows 7, stuck on the specific update

  Hello world!
  I have recently (last Saturday) purchased a new HP laptop with Windows 7 installed. The computer is now going through the standard (I guess they are standard) updates for Windows and successfully completed several rounds of them. Last night after having turned it off the computer began another series of updates, with 14 in the total bundle. She started 1 of 14 around 20:00 and started 4 of 14 at 22:30. From 08:30 the next morning, he was still on 4 of 14.
  Is this an update that takes 12 hours to install, or is there another problem causing my computer to not to go beyond the update? I found no way to bypass the update or cancel it.

  Thank you!

  Hi Kristi,

  Are you able to boot to the desktop now?

  Let us check that the windows update history for the error code.
  1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.
  3. in the status column of this window, find the update failed to install, and then click the red X.
  A new window opens that displays the installation error code.
  4 write down the error number and post it back.

  Until you can, let us perform startup repair that may help you resolve the issue.

  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Follow the instructions in the link below to perform the Startup Repair.

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  You can check the link below:
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Audio problem with WIndows 8 OS of the beats on the Pavilion DV6-6109tx

  Hello! First of all, my apologies if I posted in the wrong section or the bad, hp support forum do not know where to post.

  Now, coming to the point, encircled sliders Beats Audio Control Panel do not work as shown in the attached snapshot, makes no difference at all.

  

  Since I couldn't find Windows 8 drivers for my laptop model (very strange since I saw older models, getting divers to windows 8, but not my model), I tried different drivers but none of them work.
  These are audio driver packages I've tried:
  sp58226.exe

  sp59154.exe
  sp59861.exe

  Without these parameters of non-working is terrible.

  So if anyone can help me, I'll be really grateful.

  Thank you.

  Just to note, it does not appear that this unit has been certified for Windows 8.

  This site gives an idea of what to expect during the upgrade to Windows 8.

  The only step I can recommend at this stage is to install the driver of Windows 7 BEATS being related to the driver software audio compatibility mode.

  1. Download this driver.

  2. run the download when it's over. Follow the instructions and you should get a screen that asks you where to save the files. The default value must be c:\swsetup\sp55094. Take note of the destination on the screen. Click next and must complete the extraction process.

  3. after extraction, it opens a new window for installation. Cancel this window.
  Navigate to the folder of extraction.

  4. in this folder, find the real Installer. This is usually setup.exe. Right click on this file and select troubleshoot compatibility.

  5. follow the resolution of compatibility issues by selecting automatic options.

  6. one of the Setup screens will be a button for test program. Click here to begin the installation.

  7. Once completed, it must be installed in compatibility mode.

  This will give the best chance of success. If it does not, then it's a deeper problem of compatibility as Windows 8 driver architecture is different from Windows 7.

• Windows 7 hangs with the hardware problem, possibly video card

  We currently live hourly breaks down our Windows 7 ultimate (64 bit) desktop system.  Whenever Windows 7 restarts, it informs us that Windows 7 crashed because of a "hardware problem/question.
  We spent the last week using Memtest to test each individual memory stick (8 GB total RAM, 4 individual memory 2 GB sticks), as well as each of the individual memory on the motherboard slots.  Tests total were about 24-36 hours (not all at once, of course.)  Memtest found no errors.
  We are therefore now move to the video card.  Anyway is the same way and diagnostic test the video card (something similar to the test of memory)...?
  Sense, is there any software diagnostic tool that can be downloaded — like Memtest - to test its video card...?
  Thanks in advance for answers!
  * original title - card video problem *.

  Hello

  Utilities usually just video card testing their performance and General compatibility with Windows
  and the programs they are running. For the test that deals specifically with crash, BSOD and other
  questions, it would be best to contact the video card manufacturer support and check with their forums.

  Motherboard (and system manufacturers) also have troubleshooting utilities, if they will help you
  to access it.

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  Start - type in the box search-> auditor/Reset hit enter to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  ------------------------------------------------

  Check this thread for J Stuart W response which has some utilities that might help.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/random-black-screen-on-Windows-startup/ac0e0e3d-C6A2-4c35-9a69-81cfc446831f

  ------------------------------------------------

  This, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  These utilities can read the Minidump and another error collection files if you need to see what
  in them there. If this BSOD report see the below troubleshooting tool and report those or other issues
  here for further troubleshooting assistance.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ============================================================

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 answers.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can help with other errors you might find.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.