Is to modify the data stored in the catalog

Similar Questions

• Is the data stored for the forms also encrypted the passwords?

  I know that the passwords for different Web sites are stored locally in an encrypted file. I would like to know if this is also the case for the form data. Is data stored locally for the forms also encrypted the passwords?

  No, the form data is not encrypted if you save form data in Firefox

  See:

  • AutoFill Forms: https://addons.mozilla.org/firefox/addon/autofill-forms/

• FileVault will affect the data stored in the Cloud services?

  If I would turn on my Mac FileVault to encrypt my drive Fusion, this effect the data stored on both cloud services? In other words: with FileVault is active, all the data and documents I am storing in iCloud Drive, Dropbox or Google Drive since my Mac is encrypted also?

  And if this is the case, I'll be able to access these encrypted data from iPhone or iPad using the service applications usual cloud?

  (Ah yes and so that I am on this: person I know use FileVault.) Is there a drawback using FileVault (except that I have to remember my keyword safely, of course).

  Thank you for helping me make my decision.

  Full encryption of disk file Vault will have no effect on your cloud services. When you connect the drive is decrypted, it means any cloud service can access the same as data you - in its decrypted form. The downloads will not be encrypted (unless the service does its own encryption also).

  See the suppliers for more details. iCloud has this info...

  Security and privacy - Apple Support Overview iCloud

  You can encrypt files before uploading to any cloud service - but which is separate from the File Vault.

  File Vault has some potential drawbacks...

  If the drive does not recover the data are more difficult because data is encrypted - make good backups & test them!

  The computer is decrypting data "on the fly" which means it's more work than a system without encryption. The difference in performance is probably not noticeable with the new Macs, unless you start using reference tools.

  Forgotten / lost the recovery key & password will make the data inaccessible.

  The advantage is obvious, your files are not accessible to anyone, unless they have the password (or accessing the device when connected). Normally the files on a Mac can be read if someone know how to access the disk, that info is available anywhere on the internet

  for example OS X Lion mountain: transfer files between two computers using target disk mode

  It really depends on if you need protect your data "at rest" (when the power is turned off). File Vault will not protect you against any malware or other bad software etc. It's because the OS is actually the same when using - once that data is decrypted it is accessible, it's why File Vault like allows you to lock the screen with a screen saver password.

  See the File Vault information if you do not already done...

  Use FileVault to encrypt the boot on your Mac - Apple Support disk

• Updated Kaspersky and have been asked to deny/allow the following "Setup of Kaspersky Safari Extension wants to use your confidential data stored in 'List of extensions Safari' in your keychain"-is it safe?

  Update of Kaspersky, it asks me to deny/allow what follows - "Installer Kaspersky Safari Extension wants to use your confidential data stored in 'List of extensions Safari' in your keychain"-is it safe?

  # Kaspersky is one of the worst AV packages that you can install on your Mac. I suggest that uninstall you it. All he will do on your Mac is causing problems and offer no addition protection what so ever.

  Once you think you have managed to get rid of it, please download and install EtreCheck from http://etrecheck.com/

  Run it and post the report here. From the snapshot of your Mac, we say if you missed any bit and pieces during the uninstallation of Kaspersky.

• How can I display the time of the data stored in a file using labview?

  How can I display the time of the data stored in a file using labview?

  Hi Matt,

  I think that we will need a little more information as to how you capture the data, what data you capture, etc.

  If you capture a waveform, is to extract the time data waveform which includes the t0 and dt values, so you can understand the time stamp of a specific data point as in the image below.

• If I update to windows 7 to 10 will I lose all the data stored, photos, etc.

  If I update to windows 7 to 10 will I lose all the data stored, photos, etc.

  Original title: carover

  If I update to windows 7 to 10 will I lose all the data stored, photos, etc.

  It seems that you do not have to back up your data regularly. A lot of people don't. By far the best incentive for them to change their habits is a disastrous loss of data. In this forum, we receive their calls for assistance with great regularity.

  To answer your question:

  • People do not back up their irreplaceable files regularly (e.g. weekly) will sooner or later lose them. It's only a matter of time.
  • People performing a major operation as an upgrade of the operating system considerably increases the risk of losing their data.
  • Those who backup their data without immediately pick up some examples of files on another PC often find that their untested backup is useless.

  This current position illustrates the problem.

• How to reset all data stored on the mac and modem addresses in win 7

  It seems that my brother when he comes to get the shop computer connected to the internet and it seems that something has happened when you choose what type of network, it is for the connected modem. the thing is that since that point the wizard has not arisen more and I was unable to use the modem to whom it happened.

  When I use my home connection, I use a connection wireless or wired even and all right, but I don't know how can I reset the data stored on the internet devices mac address and dns...

  so if I would again plug into the modem that has happened this problem, he probably pop ups yet what kind of network for the device connected.

  I tried netsh reset, but nothing happened.

  greetings and thanks in advance

  PS: I use win 7 Home Basic. x 64

  Lenovo laptop

  To reset the cache of MAC addresses: netsh interface ip delete arpcache

  To reset the DNS: ipconfig/flushdns
  
  
  Edit: remember to do as an administrator. It also can not solve the problem, but it is worth it.

• Modify the Exif data

  Hello world!
  I'm having some trouble surrounding the metadata on some images in my library of images.

  I just started working at a new company and their library of images is a mess. I worked on the automation of a project I've worked on, but so that it works properly, I need to access the metadata for the images that I work with.

  
  Here's the problem; Many of their images have the date stored in the tab 'base' in 'File Info', but they don't have anything in the exif data. Is their no way to automate Photoshop or bridge (or possibly Automator or Applescript) to fill in the exif data based on the "Date of creation" of in the Basic tab?

  I am at a loss here, there are more than 30,000 images to treat so typing manually for each image is not really an option (I really hope that I am not obliged)

  I really appreciate any help and suggestions.

  Thank you all!

  -Jeremy

  I downloaded the script you need to be connected and put it here for you...

  Wikisend: free file-sharing service

• Another user has modified the line containing oracle.jbo.Key [186 primary key].

  

  as summer sees in this photo, when I click on the button to edit, it will invoke the code like this:

  BindingContext bcxt1 = BindingContext.getCurrent ();

  DCBindingContainer bc1 = (DCBindingContainer) bcxt1.getCurrentBindingsEntry ();

  DCIteratorBinding iterProj = bc1.findIteratorBinding("CuxProjects1Iterator");

  DC DCDataControl = iterProj.getDataControl ();

  ApplicationModule am = (ApplicationModule) dc.getDataProvider ();

  ViewObject projVO = am.findViewObject("CuxProjects1");

  projVO.clearCache ();

  projVO.setNamedWhereClauseParam ("project", currProjId);

  projVO.executeQuery ();

  got this page with changes on the name of the project:

  

  then click on 'done' button.invoke a procedure like this:

  State channel = null;

  DBTransaction connection BD = this.getDBTransaction ();

  CallableStatement st =

  BD connection.createCallableStatement ("start cux_projects_crud.update_proj(?,?,?,?,?,?,?); end; ", 0) ;

  try {}

  st.setInt (1, proId);

  st.setString (2, proName);

  st.setString (3, proSummary);

  st.setDate (4, null);

  st.setDate (5, endDate);

  st.setInt (6, userId);

  st.registerOutParameter (7, Types.CHAR);

  st.executeUpdate ();

  State = st.getString (7);

  Then return to the first page as the top image.

  My problem is not rested but redesigned data into DB. When I click on the button to edit again, I get ' javax.faces.el.EvaluationException: oracle.jbo.RowInconsistentException: Houston-25014: another user has modified the line containing oracle.jbo.Key [186 primary key].» This error. How to solve this problem?

  In addition, I see a problem that the changes you make in the procedure are not validated and will not be picked up by the query.

  Timo

• Steps: we received the file in PDF format and has been invited to modify the form.

  Steps: we received the file in PDF format and has been invited to modify the form.

  
  

  My colleague edited in Livecycle es4.

  
  

  When we sent the document to them, they asked to have the title marked as H1, as it is currently labeled as content.

  
  

  In live cycle, unknowledgable about how we change it.

  
  

  We then took the file is saved as a word document in their exported to PDF via adobe DC

  
  

  my changes and referred.

  
  

  Once they have received the file they are unable to put anything (all data in the document where it will also prompt) using the player

  
  
  

  We are not writing this on the central computer, but that's what we have...

  
  
  

  Acrobat reader ix 11.0

  
  

  Adobe live cycle ss4 11.0

  
  
  

  Thank you...

  It is urgent need please reply as soon as possible

  Hi barbarac80529448,

  Please see this KB doc. helps LiveCycle | Working with the forms, it might help you in the installation of PDF form in Adobe LiveCycle.

  Kind regards

  Nicos

• Need help to modify the Script to find the number of vCPU and reservation of memory in VC

  Hello

  Need help to modify the script so that his can person report to the vc all focus level instead of each level of the Cluster.

  Thank you

  KR

  Try this instead:

  $vmsInfo = Get-VM
  #Creating array to place new object
  
  $reportdata = @()
  
  Foreach ($vm in $vmsInfo)
  {
  #Creating new object
  $vmInfo = "" | Select Name, CPUReservationMHz, MemoryReservationGB
  $vmInfo.Name = $vm.Name
  $vmInfo.CPUReservationMHz = $vm.ExtensionData.ResourceConfig.CpuAllocation.Reservation
  $vmInfo.MemoryReservationGB = $vm.ExtensionData.ResourceConfig.MemoryAllocation.Reservation / 1024;
  #Inserting data into new object.
  $reportdata += $vminfo
  }
  $reportdata
  

• Try the managed version without modifying the machine.config file

  Hello
  
  I'm testing the managed version of the driver, and I have the following question:
  
  Is it possible to use it without modifying the machine.config file?
  
  I tried to add the following line to my web.config within the < configSections > tag file:
  
  "< name =" article oracle.manageddataaccess.client"type =" Oracle.ManagedDataAccess.Client.OracleClientFactory, Oracle.ManagedDataAccess, Version = 4.112.3.50, Culture = neutral, PublicKeyToken = 89b483f429c47342 "/ >
  
  and what follows within the tag < system.data > < DbProviderFactories >:
  
  < = invariant 'ODP.NET, Managed Driver' name = "Oracle.ManagedDataAccess.Client" description = "Oracle Data Provider for. NET, the driver managed" type = "Oracle.ManagedDataAccess.Client.OracleClientFactory, Oracle.ManagedDataAccess, Version = 4.112.3.50, Culture = neutral, PublicKeyToken = 89b483f429c47342" / > "
  
  but then I get an error saying:
  
  Type 'Oracle.ManagedDataAccess.Client.OracleClientFactory' does not inherit from 'System.Configuration.IConfigurationSectionHandler.
  
  Greetings.

  In the tag, try with:

  J..

• How to modify the .vmx ESXi 4

  I get the following message in my event log: not enough of video RAM. The maximum resolution of the virtual machine will be limited to 1520 X 1140 to 16 bits per pixel. Use the maximum resolution configured 2360 x 1170 16 bits per pixel, increase the amount of video RAM allocated to the virtual machine of setting svga.vramSize = "16708800" in the virtual machine configuration file.

  I guess I need to use the vSphere CLI app to make this change?

  I am able to get the path to the .vmx the CLI, but am not sure what to do next to actually modify the file.

  Any suggestions greatly appreciated...

  You can use of the vCLI alive to copy the vmx file locally then upload again.  You can also use the data browser for this store.  If you change the virtual machine, you can also set the video memory on this screen (select the virtual device of video card).

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• What makes "modify the Collection published"?

  If I right click on a published collection there is a command 'modify the Collection published.  In the dialog box that appears, it seems the only thing I can do is to rename, but there are already a name change from the context menu.  Hit to CHANGE them in the dialog box seems to do nothing.  What Miss me about the use of this command.  It doesn't seem to be any info on it in a google search.

  

  It depends entirely on the plugin which lies behind that published service, Bob. The usual thing would be to encode the plugin so that the menu option opens a dialog box with the settings associated with this service.

  For example, imagine that the plugin's download shoots to a printing service. Edit can produce a dialog box which gets the info from the service (for example, standard prices) and allows you to add your profit margin or the uprising. When you close the dialog box that the information is stored in the catalog and sent to the service.

  So Edit can do all sorts of things and it is not surprising that Google may not provide any obvious answer.

  John

• Modify the file Listener (listener.ora) to remove PASSWORDS

  Oracle 10.2.0.4
  64 bit SPARC Solaris 10.5
  
  We have our listener that is locked by password user authentication. As Oracle has recommended, should not the authentication of users, leading to the decision to withdraw the following:

  #---15: 38:18 - ADDED BY TNSLSNR October 29, 2007
  PASSWORDS_MYDB = 8E28G2195BB5339
  SAVE_CONFIG_ON_STOP_MYDB = WE
  #--------------------------------------------

  My Solution:
  1 stop listener < nom_recepteur > and change the lines above in the listener.ora file
  2. start receiver < nom_recepteur >
  NOTE: This must be done via a shell script.
  
  
  Question:
  1. the solution above will make the listener authentication OS again?
  2 does the script below make sense?
  

  #! / bin/bash
  # Modify the listener to use only the OS authentication
  CD $HOME
  . . / mydb
  CD $ORACLE_HOME/network/admin
  CP listener.ora listener_'date of +%Y-%m-%m'.ora
  CP tnsnames.ora tnsnames_'date of +%Y-%m-%m'.ora
  Lsnrctl set of password $instanceName
  $instanceName lsnrctl stop
  SED EI "/ PASSWORDS_/d ' EI ' / SAVE_CONFIG_ON/d ' e ' / #-/ d ' listener_' day +%Y-%m-%m'.ora > listener.ora
  lsnrctl start $instanceName
  echo "Listener $instanceName update"
  echo "* mydb.sh is complete * '

  I'm more worried about 7th line, where the password is defined. I would appreciate any help with the password that passes to the listener via the script

  Yes, the listener returns to OS authentication if you remove the "PASSWORDS_MYDB =" line of listener.ora and then bounce the listener. You can check this by using a 'lisnrctl status' command before and after the rebound. "Judge of what happens to a test on one of my listeners, while the listener is password protected" lsncrtl status "should show the line

  Security                  ON: Password or Local OS Authentication
  

  After removing the listener.ora password and restart the listener, this should change to

  Security                  ON: Local OS Authentication
  

  Published by: karluk may 11, 2011 09:23