Try the managed version without modifying the machine.config file

Similar Questions

• "The missing config file corrupt" error message appears

  When I start my laptop, I get the "Missing config file corrupt" message and I can't start windows, it falls needs the original installation cd-rom!

  It seems that I do not have this cd? That I should?

  I don't want to just do a restore from the hard drive that I'll lose everything.

  Any ideas?

  Please, I beg you!

  Hello

  Have you tried booting in safe mode?
  If it is possible, then you can try to use the System Restore tool under Programs Accessories System Tools, you should find.

  Try to roll back the OS to the beginning. Well, if this procedure doesn't help then as said jmatthews you save files on the other computer and reinstall the operating system.

• Can I change the location of the vmx config file?

  Hello

  I have Esx 3i 3.5 running in the cluster, and installing vCenter 2.5 Update5 as virtual machine within this cluster of ESXi. I put the configuration file vmx to this virtual machine on the wrong number of unit logic (data store). How can I change the location of the vmx configuration file to another location?

  All boards have a lot appreciate.

  Thank you

  First remove you the inventory (Yes, it's unsubscribe in my mind), and after copying you use add to inventory.

  StarWind Software R & D

• new data in the standy config file

  My standby_file_management is set to auto. But when I added a new data file, it has not added on the standby server.
  
  my version of db is 10.2.0
  on linux

  standy_file_management only works if a new data file is added...
  If the value automatically the data file gets created automatically in standby mode; but in the case of copy it from another source, it must copy on the standby server as well... Besides, you also have to re-create the standby control file.

• Comment by instructions in the PIX config file?

  Hello

  Is there a way of declarations of entry comment in a PIX config file? If so, how?

  TIA

  Prefix the line with a: (colon).

  for example. The first line of the following is a comment and is ignored

  : Allow access to the Web server

  acl_outside list access permit tcp any host 1.1.1.1 eq www

  Note: Comment lines are deleted when the configuration file is entered in the PIX.

• PrimeClient cloning to configure Client1-6 to take care of several mosaics, Question on the vmmark2.config file

  I intend to run several mosaics.  For my setup, Client0 is customer first, and then I have:

  -Client1

  -Client2

  -.. .route customer 7

  What should I do with the files vmmark2.config for the rest of the guests?

  -Should they be configured separately in the context of the tile that the customer belongs to?

  - Or do I just worry on the preferred client configuration file and leave the rest to default values?

  Only for the first file used get VMMARK2.config customer.

• Comments in the .vmx config files?

  Hello world

  Can you tell me symbol for standart in .vmx files comment line?

  Thank you, I use VMware WS7.

  The following is an example...

  #  This line is a comment
  

• Error code the Wmplayer.exe file has a Version number of 11.0.5721.5262 where was 11.0.5721.5145

  No sound in Windows.  Message from the file Wmplayer.exe has a Version number of 11.0.5721.5262 where 11.0.5721.5145 was expected.  Windows Media Player is not installed correctly and must be reinstalled.  This happened for no apparent reason.  Tried to install WMPlayer 11 Web site created for and still get the same message.   Help please?

  Hi AnnieT2053,

  Although the error message prompts you to reinstall the Windows Media Player, reinstalling does not necessarily fix the problem. Generally, the error message appears again when you try to launch Windows Media player after reinstallation.

  Method 1: To resolve the problem, perform the following steps:

  a. go to Start , then click run.

  b. type following command in the Open box and then press enter:

  c:\windows\inf\unregmp2.exe /UpdateWMP

  The steps above resolve the confusion that your computer has been with the version numbers of Windows Media Player, and then corrects the error.

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompts, the following line and press ENTER:

  sfc/scannow

  See also:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

   

  Method 3: For no sound problem, you can follow the below mentioned article.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

   

  I hope this helps.

• After 13 updated both the system rebooted and now as he begins to install XP it autorestarts. It will not recover to the last known good config and delivers a message of corrupted config file.

  Any ideas?

  Thank you

  Frank

  You will share exactly what the message of the corrupt config file says?  My crystal ball takes off the second Wednesday of each month.
  If your system reboots continuously, the next time the system reboots, start tapping the F8 key until you see the menu Boot Options Advanced XP.  On the Advanced Boot Options menu, select:

  Disable the automatic restart in the event of system failure

  This will display the error message that you don't see when the system restarts.  This is what Windows is supposed to do when there a failure - it is supposed to automatically restart.  The error you see on the screen has your clues...

  If you do not see the menu Options start Advancded or you do not have to turn it off automatic restart on option system in the list of choices, you need to try again until you do.  Start typing the F8 key earlier and more frequently as your system begins to come alive.  If you miss the window of opportunity F8, you must try again.
  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)
  ?
  Most of the time (in recent memory) when there is a problem after installing Microsoft updates, the problem is because the computer was somehow afflicted before/when updates have been installed and updates simply bring to the surface a problem that was not evident before.
  If the last thing people remember is to install the updates from MS, it's am understandable reaction in some way involve updates for updating the post problems when things don't work properly afterwards and especially during the next reboot.
  Another reaction is to try to remember all of the updates you have installed and somehow uninstall the updates one of the XP Recovery Console until you find one who is 'responsible '.  Unless you noted all issues of update, it would be more difficult, but not impossible.  It is unlikely that practical or useful advice in most situations, but you can of course try it.
  Security updates sometimes holes patch XP and when security holes are patched (and XP is "tighter"), affliction can no longer do what is done, things to happen are no longer allowed to happen as a result of the strengthening of security, the system has now a new problem (especially when it initializes more) , and it seems that install updates broken system while in fact, it's just a coincidence.
  Another thing that can happen is that the Microsoft updates will change or update certain critical files on the XP system.  Depending on what your software antivirus or antimalware software is, these programs can interpret the new or updated files to day as being a threat or somehow infected and quarantine (effectively delete) files it thinks are wary.
  The next time you restart your system, you'll have some sort of a problem, or you do not start if the files are missing.  Once more, the problem is not with the updates, it's another condition on your system with your antivirus or antimalware programs you beautiful little (they could be aware of what like the new look of Microsoft files).
  You may have seen some or heard talk about some of these kinds of people, but not too intellectually stimulating general or scenarios of error after update:
  NTLDR is missing or corrupt, ntdetect.com is missing or damaged, ntoskrnl.exe is missing or damaged, hal.dll is missing or corrupt, etc.
  These types of errors are usually very easy to fix, but if you don't know what's happening, the temptation is to do a repair installation, or if none of these kinds of things are really necessary, completely reinstall your XP.  I have never done a system restore, a repair install or reinstalled XP in my life to solve any problem (but I did the process for practice).  These things are simply not options with me.
  Given that Microsoft sends many updates on the second Tuesday of each month (they call it "Patch Tuesday"), this means that the or to the second Wednesday of each month there is an increase of 'problems' in the field - in particular the types of problems "my computer does not start after you install the updates from Microsoft.  That day is also known as "exploit Wednesday".
  You can read about it here: http://en.wikipedia.org/wiki/Patch_Tuesday
  It is likely that if you have a problem like this or after the installation of MS updates, someone else has also had the same problem and understood what to do about it.  A problem here, is that no one knows what is your problem.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• My favicons are not showing for all of my favorites as well as some current bookmarks imported and when I opened the topic: config it says "browser.chrome.favicons; false." If this should not be true, and how to change?

  I had to rebuild my computer and when I imported all my favorites that they had no favicons. I started to receive some of the favicons when I go to the websight that he reconnect, but now I can't seem to see any of them. I did a Google search and a tech site suggested the subject: config file and that the 'browser.chrome.favicons; false' must be set to true. But when I switch to true and restart Firefox is once again set to false. I know, it doesn't seem much, but it's very annoying to not have the favicons.

  Help me Obi Wan Firefox you're my only hope.

  The browser.chrome.favicons preference must be set to true, as it is does not have the value when you restart Firefox, see the article How to fix preferences that will not save for possible causes.

• How can I activate voice recognition, without modifying the English version?

  Original title:

  speech recognition

  I DISABLED, I have windows 7 HOME PREMIUM Hebrew version. How can I activate voice recognition, without modifying the English version? What's not speak English in the Hebrew version? At least, you can play as part of the operations, such as CTRL + C, or computer games.

  Hello

  Which edition of Windows 7 work?

  Speech recognition is available in English, French, Spanish, German, Japanese, simplified Chinese and traditional Chinese.

  Reference links:
  Set up speech recognition
  http://Windows.Microsoft.com/en-us/Windows7/set-up-speech-recognition
  What can I do with speech recognition?
  http://Windows.Microsoft.com/is-is/Windows7/what-can-I-do-with-speech-recognition

  I hope this helps!

• My OS has been updated from Windows 7 to Windows 10 without disabling the Adobe Acrobat 9 installed on the machine. Now I'm not able to activate the reinstalled Adobe Acrobat. When I try to record the serial number, it is not accepted and that she is trea

  My OS has been updated from Windows 7 to Windows 10 without disabling the Adobe Acrobat 9 installed on the machine. Now I'm not able to activate the reinstalled Adobe Acrobat. When I try to record the serial number, it is not accepted and is considered as invalid. Is it others to activate the serial No. ?

  Hello

  Please see error: "serial number is not valid for this product". Adobe Creative Suite and serial number incorrect error

  Alternatively, you can contact customer service

  Hope that helps!

  Kind regards

  Sheena

• HP 550 laptop: unable to have 4 GB of RAM in the machine without patterns on the screen and locks

  Hi all

  I recently bought a laptop HP 550 used that came with no RAM. According to the specifications, the laptop uses 667 MHz DDR2 SDRAM. So, I bought 2 sticks of 2 GB of RAM from Newegg, found here.

  Ready with my MemTest86 + CD in the drive and the 2 sticks of RAM inserted, I booted up the machine. During the POST, it detected all of the 4 GB of memory. Everything seems fine at this point. MemTest86 + load, then, a few seconds pass and then... a weird pattern is displayed on the screen. The system is locked also up. You can see a screenshot of this in here.

  I then tried to run the tester of memory in the BIOS, but the part passing through the test, he showed that there was an address of memory has failed. The system locked up here as well. After the reboot, I noticed a bunch of U in the upper part of the screen during the boot process that had never been there before. You can see a screenshot of this in here.

  So now, at this point, thinking that one of the RAM sticks may be bad, I tested each stick individually testing a stick at a time in the first place, then a stick at a time in the second slot. MemTest86 + and tester of memory in the BIOS, past every time. Not once is there any model on the screen, not to mention that the U in the upper part of the screen that show during the startup process. And every time I swapped the 4 GB to 2 GB or 2 GB 4 GB, the system recognized during POST.

  The laptop came with no OS. I thought, what the heck, let me see what happens when I leave the two sticks in and attempt to install XP Pro. Well, it was even more interesting. The "Welcome to setup" screen, I press ENTER to start the XP installation. The next screen that appeared is what is shown here. The system locked up as well. But, if I take a stick so that one stick is in the machine and then try to install XP again, it continues without any problem.

  I found a second laptop make extra stable on who had a bar of 1 GB 667 MHz in it. I put two of my 2 GB sticks in the second laptop and ran the tester of memory in the BIOS as MemTest86 +. These tests. On the cell phone issue, I put 2 GB each key in first slot, individually, while leaving the key 1 GB from the second computer laptop into the second slot and past memory tests and installing XP ran fine.

  So, basically, the system works perfectly with anywhere from 1 to 3 GB of RAM in it, but if I put 4 GB in there, patterns and blocks begin to appear.

  Thanks for any help you can provide, it is much appreciated!

  What is the Celeron or Core 2 Duo version? The specs say it must be able to handle 4 gigs, but I seem to remember that others have had problems with 4 gigs on Celeron systems. Actually a reference in said Quickspecs it can perform 4 concerts only if you have the 965 chipset, not the 960 chipset:

  http://h18000.www1.HP.com/products/QuickSpecs/13091_na/13091_na.PDF

  If you install XP Pro, you need not more 3 concerts in any case... the 4th concert is not used by a 32 bit OS. The memory that you have purchased is of high quality and is not the issue. I liked the screenshots... at least you have a colorful show.

• Disable the download of files in version 3.0.8 without using an add-on

  I need to be able to prevent a user to save a file under version 3.0.8 without using an add-on. Any help would be greatly appreciated.

  So I corrected myself. That I did change the mimeTypes.rdf file to try to open the types of documents to let with/bin/rm (essentially would work with anything really.) so that it doesn't encourage them to download.

• Gmail said "some important features may not work in this version of your browser, if you have been directed to the basic HTML version. Upgrade to a modern, like Google Chrome browser. Try the standard version in any case. "

  When I visit Gmail using Firefox version 8.0 (running w7) I get this message: "important features may not work in this version of your browser, if you have been directed to the basic HTML version. Upgrade to a modern, like Google Chrome browser. Try the standard version in any case. "

  When I click "Try Standard Version Anyway" it works, but for some reason, Gmail is say that Firefox 8.0 is not a modern browser. Also, whenever I visit Gmail, he returned to the basic HTML version... ba.

  It seems that Google is trying to make you switch to Chrome. I would stick with Firefox, but Gmail is an important part of my browsing...

  I found the solution... browsing around, I found this link:

  http://www.Google.sh/support/forum/p/Gmail/thread?TID=627898d83a02180f & hl = in

  In type of Firefox:

  Subject: config

  Filter the results with:

  "general.useragent.

  All fields that are "BOLD" must be reset to ZERO. Do a RIGHT CLICK and RESET each field "BOLD".

  Worked on my w7 machine!