Similar Questions

• I want to add a fingerprint on my iphone 5s, but I can't. It shows unable to complete Setup touchid please go back and try again. Please help what should I do?

  I want to add a fingerprint on my iphone 5s, but I can't. It shows unable to complete Setup touchid please go back and try again. Please help what should I do?

  Keep trying. But first, I restart the phone.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  If she agrees not always the fingerint, reset all settings. No data is affected, but you will have to re-enter all the parameters of the device and the phone will restart on its own. Settings > general > reset > reset all settings.

  Always make sure your finger is clean, free of any oily substance and the same goes for the home button on the phone.

• Cannot add a fingerprint on the iPhone 6

  I got a new phone and add it to a selection of fingerprints is grayed out. I have try other ways to market, but it said 'cannot complete installation contact ID. Please go back and try again. "And it does not at all. I already have an access code, and I don't know what else to do.

  Hi, ibkny!

  Thank you for using communities Support from Apple. I see from your post that you can not register Touch ID because the box add a fingerprinting option is grayed out. I use the ID to touch to help the lock and protect my own iPhone, so I want to make sure that everything works!

  To do this, I recommend you to go through the "Get help with Touch ID" section of the following article.

  Use the ID button on iPhone and iPad

  Have a great day!

• How to add several presets in a reactive mode design without having to resize the screen every time

  I want to be able to add several screen size presets with the ability to view sensitive design but do not want to resize the screen and add each individually through the predefined custom function.

  Have you seen some messages on the internet (http://g-liu.com/blog/2013/08/firefox-rdm-presets/) who say it can be done, but could not find where the config is required to worm 26.0?

  Hello

  Work now how to do this. You first create an entry called "devtools.responsive.UI.presets" in the configuration file, and then add in the predefined string:

  If the steps are:

  (1) open a new tab in Firefox or window and enter about: config

  (2) (if a warning message appears, click OK.)

  (3) create a new entry devtools.responsive.UI.presets - right click and select 'new', then 'string' - under enter the preference name of the type "devtools.responsive.UI.presets" and then click OK. When the box of the input string appears simply add the following shows

  [{"key": "CGA: 320 x 200", "width": 320, "height": 200}, {"key": "QVGA: 320 x 240", "width": 320, "height": 240}, {"key": "CIF: 352 x 288", "width": 352, "height": 288}, {"key": "SIF: 384 x 288", "width": 384, "height": 288}, {"key": "HVGA: 480 x 320", "width": 480, "height": 320}, {"key": "(NTSC) VGA: 640 x 480", "width": 640, "height": 480}, {"key": "PAL: 768 x 576", "width": 768, "height": 576}, {"key": "WVGA: 800 x 480", "width": 800, "height": 480}, {"key": "SVGA: 800 x 600", "width"}] {: 800, "height": 600}, {"key": "WVGA (NTSC): 854 x 480", "width": 854, "height": 480}, {"key": "PAL: 1024 x 576", "width": 1024, "height": 576}, {"key": "WSVGA", "width": 1024, "height": 600}, {"key": "XGA: 1024 x 768", "width": 1024, "height": 768}, {"key": "1152 x 768", "width": 1152, "height": 768}, {"key": "XGA: 1152 x 864", "width": 1152, "height": 864}, {"key": "WXGA: 1280 x 600", "width": 1280, "height": 600}, {"key": "HD 720: 1280 x 720", "width": 1280, "height": 720}, {"key": "WXGA} {: 1280 x 768 ","width": 1280,"height": 768}, {"key":" WXGA: 1280 x 800 ","width": 1280,"height": 800}, {"key":" SXGA: 1280 x 1024 ","width": 1280,"height": 1024}, {"key":" 980 x 1280 ","width": 980,"height": 1280}, {"key":" Microsoft Surface RT: 320 x 240 ","width": 1366,"height": 768}, {"key":" 1400 x 900 ","width": 1400,"height": 900}, {"key":" 1400 x 960 ","width": 1400,"height": 960}, {"key":" SXGA +: 1400 x 1050 ","width": 1400,"height": 1050}, {"key":" 1400 x 1080 ","width": 1400,"height": 1080}, {"key":"1600 x 900"} {, "width": 1600, "height": 900}, {"key": "UXGA: 1600 x 1200", "width": 1600, "height": 1200}, {"key": "WSXGA +: 1680 x 1050", "width": 1680, "height": 1050}, {"key": "1920 x 900", "width": 1920, "height": 900}, {"key": "HD 1080: 1920 x 1080", "width": 1920, "height": 1080}, {"key": "WUXGA: 1920 x 1200", "width": 1920, "height": 1200}, {"key": "2K: 2048 x 1080", "width": 2048, "height": 1080}, {"key": "QXGA: 2048 x 1536", "width": 2048, "height": 1536}, {"key": "WQHD: 2560 x 1440", "width": 2560, "height": 1440}, {"key" {: "WQXGA: 2560 x 1600", "width": 2560, 'height': 1600}, {'key': "QSXGA: 2560 x 2048", "width": 2560, 'height': 2048 '}, {'key': "2160 p: 3840 x 2160", "width": 3840, 'height': 2160 '}, {'key': "4 k: 4096 x 2160", "width": 4096, 'height': 2160 '}, {'key': "4320 p: 7680 x 4320", "width": 7680, 'height': 4320 "}, {'key':" 8 k: 8192 x 4608 ","width": 8192, 'height': 4608 '}, {'key':" 8640 p: 15360 x 8340 ""} [{, "width": 15360, 'height': 8640}]

  then click OK

  All new presets should now be sensitive design mode.

  Worked for me!

• Whenever I add several or even just a trac to my iphone, it takes several minutes 'PREPARATION OF the UPDATE.

  Hello world...
  Whenever I add several [or one] track from my iTunes to my iPhone library, there are several minuets 'PREPARE to UPDATE' and then he goes to copy the tracks I wanted with 900 or so titles and several videos I did not update..., can someone explain why this is happening?
  I think I have all the auto update features are disabled, and I do not use the cloud or new music thingy.

  Thank you!

  Fredy

  The following steps should solve the problems around the synchronization, assuming that all the content you want in your library.

  (If it isn't see recover your iTunes from your iPod or an iOS device)

  1. Backup device.
  2. Restoration as a new device.
  3. Restore the backup that you made earlier.

  NB. A feature introduced with iOS 9 called thinning or slicing app app allows each device to download just the code and resources required by this device, resulting in smaller downloads and a better use of the storage on the device. Therefore the device is no longer the universal version of the application that can be installed on any device to transfer applications is no longer supported. I hope that Apple will bring some changes to how it works, but in the meantime, you can download past purchases from iTunes or activate the automatic shopping app downloads to ensure that iTunes has always the apps you want on your device. As long as you make sure that all of the apps are present and updates in iTunes before you attempt a restore there should be no loss of data. I cannot confirm, but it seems a way to recent update all data are restored and apps that are not in the library are waiting to download from the iTunes Store over Wi - Fi, in a similar way to the restoration of the iCloud way works.

  TT2

• Add several domain in Active Directory

  Add several domain in Active Directory

  Hello vinod Thakur Linux,.

  Microsoft Communities is consumer related questions about Windows 8, Windows 7, Windows Vista and Windows XP. For questions about the field of issues related to Active Directory, it would be best to ask your question on the TechNet forum.

  Click here to transfer your question in TechNet for Windows Server in the Directory Services forum.  They will be able to solve your problem.

  Thank you

  Marilyn

• IllegalArgumentException in VerticalFieldManager to add several ObjectChoiceFields

  Hi all

  I'm IllegalArgumentException in VerticalFieldmanager to add several ObjectChoiceFields.

  VerticalFieldManager row = new VerticalFieldManager(VerticalFieldManager.NO_HORIZONTAL_SCROLL |VerticalFieldManager.NO_VERTICAL_SCROLL);VerticalFieldManager row1 = new VerticalFieldManager(VerticalFieldManager.NO_HORIZONTAL_SCROLL |VerticalFieldManager.NO_VERTICAL_SCROLL); for(int i = 0; i < blackBerryContacts.size(); i++){BlackBerryContact item =(BlackBerryContact)blackBerryContacts.elementAt(i);             choiceP[i] = new ObjectChoiceField("", choiceFld,0, FIELD_RIGHT);
                  int index = choiceP[i].getSelectedIndex();
                  String selectedChoice = choiceFld [index];
                  chkBoxField[i] = new CheckboxField(sb.toString(), true,
                          Field.USE_ALL_WIDTH | CheckboxField.FIELD_LEFT)
                  {
                       //Invoked when this field receives the focus.
                      protected void drawFocus(Graphics g, boolean on)
                      {
                          if (g.getBackgroundColor() != 3098850)
                          {
                              XYRect xy = g.getClippingRect();
                              g.setBackgroundColor(0xf9f8f5);
                              //g.fillRect(xy.x,xy.y,xy.width,xy.height);
                              g.clear();
                          }
                          super.paint(g);
                      }
                      protected void paint(Graphics g)
                      {
                          int x = this.getIndex();
                          XYRect xy = g.getClippingRect();
  
                          if (g.getBackgroundColor() != 3098850)
                          {
                              g.setBackgroundColor(0xf9f8f5);
                              //g.fillRect(xy.x,xy.y,xy.width,xy.height);
                              g.clear();
                          }
                          super.paint(g);
                      }
                      protected boolean navigationClick(int status, int time) {
                          if (this.getChecked())
                              this.setChecked(false);
                          else
                              this.setChecked(true);
                          //fieldChangeNotify(1);
                          return true;
                      }
                  };//----------
                  row.add(chkBoxField[i]);
                  row1.add(choiceP[i]);
              }
  

  chkBoxField can be added in VerticalFieldManager but ObjectChoiceField is exception.

  Please help me.

  Thank you

  DK.

  Unfortunately, ObjectChoiceField does not allow to have another field in the same row. This area needs the line of the screen. When you try to add the field to the line where the ObjectChoiceField - you get an error.

  I recommend the following approach.

  Data model

  public class BlackberryContact {
  
      private String Fullname;
  
    ....
  
    private Vector contactInfo;
  
    public void addContactInfo(BlackberryContactInfo info) {      contactInfo.addElement(info);     ....  }}
  
  public class BlackberryContactInfo {
  
      public final int CONTACT_TYPE_HOME_PHONE = 1; public final int CONTACT_TYPE_WORK_PHONE = 2; public final int CONTACT_TYPE_EMAIL = 3;
  
      // type of contact: phone, email, etc private final int contactType; 
  
    // contact info: phoneNumber, emailAddress    private final String contactInfo;
  
    // constructor, use CONTACT_TYPE_.. constants as contactType      public BlackberryContactInfo(String contactInfo, int contactType) {       this.contactInfo = contactInfo;       this.contactType = contactType;   }   
  
    public int getType() {        return contactType;   }   
  
      public String getInfo() {     return contactInfo;   }   }
  

  VIEW

  Implement a screen to display BlackberryContact, say BlackberryContactView

  Add the text field to refer to and add ListField to view available contact information (emails, phones, etc.).

  Each person can have different qty of coordinates, ListField is the best choice.

  Will look like the screen layout is shown on the picture:

  http://picasaweb.Google.ru/tbilisoft/BlackberryForum#5285460326711217906

• How do you add additional text boxes to a model card in MEA Mobile?

  How do you add additional text boxes to a model card in MEA Mobile? There are only three areas of default text of article metadata. I need to add 4 or 5 separate metadata text boxes to my card.

  Thank you.

  Here is a screenshot:

  

  You are allowed only three lines of metadata. However, you can add several fields of metadata for each line, like this:

  {{Title}} by {{author}}

  {{Summary}}

  {{Department}}, {{category}}

• How to add several records of existing virtual machines

  Is it possible to add several drives in one shot to a virtual machine?

  I know it's possible with the new - vm cmdlet, and if I manually modify the virtual machine, I can add as much as I want.

  The cmdlet New-hard drive allows only 1 at a time, I can say.

  Any suggestions?

  You are right, that the cmdlet New - hard drive allows the addition of 1 HDD at the time.

  If you want to add several hard disks, you will need to use the ReconfigVM_Task method.

• Prime Minister CC does not allow me to add several MTS files in the same sequence?

  Hello. I've been shooting on a Sony A7s ii. When editing first CC does not allow me to add several MTS files in the same sequence? It will add the audio but no Visual.

  Any ideas?

  Hi Bunglefoot,

  Hello. I've been shooting on a Sony A7s ii. Which first CC edition does not allow me to add several MTS files in the same sequence? It will add the audio but no Visual.

  Please visit this link:

  FAQ: Why no audio or video will not at the track where I let down?

  Thank you

  Ilyes Singh

• How to add several tracks with offset path?

  Hello

  I would like to create a script that can create multiple strokes with offset path (incremental or material (user will enter value))

  Is it possible to add several traces? I have found no examples in the script reference or elsewhere.

  Note: Mixtures does not give exactly the same results because sometimes especially when you are dealing with fonts outline paths is to be wrongly mixed a way.

  I'd be happy if someone give at least the main command loop.  I'll try to rest and will share here because I find the solution.

  Thank you

  Best regards.

  

  OK, I'm going to assume your sub windows through the capture in the opening screen post.

  This is a completely different approach.

  This example uses executeMenuCommand so is only compatible with CS6 +.

  and Windows is only used from VB

  //-------------------------------------------------------------------
  
  // Offset Path in apperence panel
  
  // Script by Qwertyfly
  // contact [email protected]
  // version 0.1 beta
  
  //-------------------------------------------------------------------
  
  //number of offset paths
  var Qty = 5;
  
  //amount to offset
  var Offset = -5;
  
  //units to offest in
  var Unit = "px"; 
  
  //time to wait in milliseconds before sending keys.
  // more time is slower but more stable
  // I was able to run this with it set to 0, but a little bit of a pause is a good idea.
  var wait = 10;
  
  //-------------------------------------------------------------------
  function FillDialog_Windows(distance){
      var VB = [
          'WScript.Sleep ' + wait + '',
          'Set WshShell = WScript.CreateObject("WScript.Shell")',
          'WshShell.SendKeys "' + distance + '"',
          'WshShell.SendKeys "{ENTER}"'
          ].join('\n');
      var VBgo = new File('~/go.vbs');
      VBgo.open('w');
      VBgo.write(VB);
      VBgo.close();
      VBgo.execute();
  }
  function MakeStroke(offset){
      app.executeMenuCommand('Adobe New Stroke Shortcut');
      FillDialog_Windows(offset);
      app.executeMenuCommand('Live Offset Path');
  }
  
  for(var i = 1; i		   

• How can you add two signatures

  The DC version does not give me that option, but the older version of Acrobat has allowed me to have two different signatures to be applied to the documents I missed something?

  Hi jeanines364,

  If you use the Digital Signature option, then it is possible to have multiple signatures in a PDF document when you have several signs in fields.

  Or if you want to use the functionality available in filling signature & sign app you can simply add a signature and apply it to the PDF format. After that, delete the stored signature and add a new one.

  Thank you

  Abhishek

• I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  For later use, it happened because your fields have the same field name, and fields with the same name automatically have the same value.

  So all you had to do was so each had a unique name and it would have worked, but using the command create several fields is preferable because it renames the fields for rename you them.

• Add several lines in tabular form which object to list different shows to all rows

  Hello

  Apex 4.2, oracle 11 g 2

  I have a table on the emp table where when I click on Add button line

  then I get no lines that are stored in the string.

  for this element of the page creation PX_job that return the value of separate employment with two points separate values by the

  for example seller: Analyst: Clerk: Manager: President

  to add several lines to add lines.

  by using the dynamic action

  event: click on

  selection type: button

  Action: run javascript code

  as follows

  var a = $v("PX_job").split(":") // Delimiter is a string
  for (var i = 0; i < a.length; i++)
  {
  
  apex.widget.tabular.addRow();
  
  }
  
  

  This work that well it adds the number ranks equal to 5

  now I'm post job as select list

  now I want to display the list of work in form of tables as row 1 poster list entry, second row entry list second poster... last line shows last entry from list

  but working this column in all the rows by first writing list of projects in the work list

  How to solve this problem.

  Leave.

  Hi, go,

  Yes, you need to replace "myvalue" with the return value of the select list. But even in this case it would be a problem because it would change all the lines.

  In any case, I changed the code to do this:

  apex.widget.tabular.addRow (); Add the line

  var checkboxIndex is apex.jQuery('input[name=f01][value=0]').eq (i) .parent () .parent () .index ();. get the number of the line that was added

  var SelectItem = apex.jQuery('select[name=f04]').eq (checkboxIndex); Use this number to get the selection list

  iOption var = apex.jQuery (SelectItem) .children () .eq (i) .val (); Get the i option value

  apex.jQuery (SelectItem) .val (iOption); Set the value of the option

  I hope it's clear.

  Kind regards

  Joni

• is it possible to add several portfolios in a slide show?

  I would like to add a slideshow on a page of my site. I would like to add several records with different images in this slide show. How is that possible?

  Thanks for the reply!

  Just delete all the content you find on maps, including the image. Then place a slide show on the map and fill with images.