is trace SQL - possible to appoint the output trace file?

Similar Questions

• Hi, is it possible to change the names of files that export out of indesign while packing?

  Hi, is it possible to change the names of files that export out of indesign while packing?

  For example, I can change the "Font of the Document" folder to export as a "document-fonts"?

  I ask because our naming structure requires without capital letters and no spaces. Spaces are replaced by dashes (-).

  And it would be nice if it was always exported as needed, instead of having to go back and change the names of files.

  Thank you! Much appreciated!

  Which cannot be changed without having a bad effect,. The name "Document fonts" is special. When you compress a file with fonts in a folder using exactly this name, InDesign know that these policies should be open and will be used in the document to the other end. If you name this file anything else, InDesign ignore fonts and the recipient will have to open the fonts manually.

  If you have decided to change the folder names, you will need to do once the package created, perhaps with a script.

• Is it possible to limit the output of a multi-turn encoder to match a single round?

  I use a Heidenhain encoder with an EIB Heidenhain 741. The 741 takes EnDat signals and converts them. I use a program called LabView of Heidenhain poll Positions. The encoder outputs are incremental and absolute. The outputs take into account after a revolution and I would go back to 0. The program uses a table 1 d with quad 64-bit for the absolute value and an array of 1 d of 16-bit value for the incremental values. I'm trying to convert them into degrees. I have done this except when it reaches 360 that the count is not 0. Is there a way to count position back to 0 when the number of bits is done?  Or y at - it a way to make the degrees back to 0? The degrees was taken out by taking the (Position/((2^26)/360)) which is Position/186413.51.

  This is my first large LabView project I hope this is enough information.

  Use the function Quotient & rest on the digital palette.  Divide by 360.  The output remains will always be in the range 0-359.

  Lynn

• Is it possible to sort the images by file name?

  I imported a record of 200 images in Photos for OS X (El Captain). Image files have been appointed in the order - I want them to appear in a slide show: photo_01, photo_02 etc...

  Once I imported the images - I found them all out of order - and the only options I can find in the view menu are somehow 'oldest first', 'newest first' or ' title '. Please, someone tell me I'm missing something obvious - he and not that Apple chose to omit the possibility to sort the images by name? If this is the case - I'm speechless - how is f - ing stupid!

  Sort by file name is not an option in the Photos. Albums and smart albums you yourself set can be sorted by name, date of capture, or manually.

  Sorting through the predefined albums is automatic:

  • 'Photos' display with moments and collections is sorted by date of capture and the location.
  • 'All the Photos' display is sorted by the date of the import session.
  • Other built-in smart albums are sorted by the date of capture.

  You can see the current sort order, preset, if it is grayed out in the "view > sort ' menu.

  As a workaround:

  1. If you need to want pictures to be sorted by file name, copy the name of the file in the title field. Then, create a smart album of the items and sort by title. We have posted a trick to copy the name of the file in the title field for the selected photos: Script: change the title filename without Extensionor: Script: batch change the titles of the Extension/w
  2. Or view your photo library in pictures of power.  This versatile tool lets you browse photos as a list or thumbnail while looking the other metadata under the thumbnails or displayed as list with columns selected and sorted by columns.

  You can do a lot with the free trial: download PowerPhotos here: Fat Cat Software-PowerPhotos

• Is it possible to edit the ultiboard log file (v10.1.1)?

  I made the mistake of removing parts of a design Ultiboard and will then mark them up a very different conception of Multisim. Now when I try to renumber all reference indicators and annotate back to Multisim, he wants to remove all items first and then make him renumber. It is with the version 10.1.1. Is it possible to edit the log file if it doesn't do the renumbering of part?

  Since this drawing took me 3 days to deliver, she really sucks if I start more can renumber parts.

  I thought that the answer would be no because I think they address this version 11. But I found a way to 'cleansing' of the log file. I created another design, just copied and pasted in the new design. At that time, I had the same exact design, with the same reference indicators and all traces of tact, but none of the nets. I've annotated front of Multisim and introduced all the nets without error. Now I have renumbered all parts and retro-annotation. He wanted to stick all over again but this time that Multisim just said "not supported - add part xxxx" which meant that there nothing done. But she made the reference of all changes of the indicator. Yay. Even if she was in trouble with multi-sectioned parts. He would get a right door, but the rest would be something different with "xx" in the reference indicator. As "Uxx6A". So all I had to do by clicking on the parties and select 'replace the component' and it will show the indicator just with a single gate used and I just had to select the same door.

  So problem solved.

• PDM-files: is it possible to prevent the creation of files .tdms_index of LabVIEW and tiara?

  Hello

  is it possible to prevent the creation of .tdms_index files when opening/creating/editing of LabVIEW and tiara a .tdms file?

  I think that I have no advantage in the .tdms_index files, because our applications create many small .tdms-files (repeated measures). With .tdms_index files, we have unnecessary memory consumption and it takes longer for Windows Open the containing folder. Also it s confused when you search for a certain file.

  Best regards

  Daniel

  Hi Acer,

  I'm afraid there is a direct way to disable the creation of file .tdms_index now of LabVIEW and tiara. You can use the API Advacend TDMS in LabVIEW, which does not create an index file, or you can just do a simple programming and remove the .tdms_index file after closing the PDM file.

  This is a request for a long time, we will consider adding this feature for TDMS in future versions.

  Ye Yongqing

  OR R & D

• Is it possible to keep the same arrangement file after changes PS?

  After editing a file of LR in PSCS3 (and then save and close), when this file returns to LR, this is a psd. file & changes his place until the end of the catalogue as well as the original file of the NAVE and is the file that is selected. This is annoying as I have while you open the Panel background film and back the cursor to the position where the photo I just edited was originally to go to the next photo (instead of simply by pressing the arrow button to the right). It is a waste of time. Is it possible to have the original file of the nave as well as the return to its place of origin in the psd file catalog. I am aware that I can probably rearrange the files later, but it does not solve the problem of workflow.

  Tim Dalton wrote:

  That is the Question. Is it possible to have this original Photo 1 (with psd) to be in the place where Photo 1 is supposed to be, at the beginning of the catalogue & not at the end.

  The recorded image and the original may not move normally at the end of the film. Check that the sort order is not the ordervalue.

• Problems with the service of version 9.0.2? Sudden research questions of text in the output WinHelp files

  I've been building and using the same aid project in multiple versions of Robohelp since 2002 about.  Upgrade to Robohelp 9 earlier this year (Office 2010/Win 7), properly migrated project in RH9 and Word 2010 RH7 and W2003.  Despite being really bug RH9 and doesn't play well with Word, were able to continue to build multiple versions of the project without successfully exit WinHelp 2000 compilation problem, no error messages all basically good.  Until the 9.0.2 update.  Of course, the update fixed the issues of speech, now HR and Word 2010 not play very well. But now I get the dreaded "cannot search, display tab: error 177' Message in compiled projects.»  This same message now appears on WIn XP machines that have the project distributed.  Also find full-text search is available on the Win 7 despite the warning, but on a XP machine machine only partial text is available for searching (so this is not the question of Win7 re display of files HLP - win 7 has all the patches of register machine and MS. HLP Patch installed to run and has not been a problem to date).  Coincidence?  This started to happen since the 9.0.2 update installed?  (The cause of the error message doesn't seem to be the traditional corrupt file GID on PC like on XP machines before the new installed help file, it will be deleted).  Have I somehow changes the settings in the HPJ file or another project file generation?  Is this a problem of indexing that I can fix?  If so someone at - it ideas?  Come to think of him with ideas at all about what is happening here and how can I solve this problem?  (I'm considering back in the initial installation of RH 9 (implemented with Bugs) and see what happens but fear I might have inadvertently installed something version 9.0.2 )

  Another interesting question is that the immediately previous version of this project (built with the Buggy of RH9 version) re - unfolds on the other computers and XP very well.  So why I suspect 9.0.2?  Anyone with some help pls?  Where I could look in settings (if any) to correct the problem?  I tried to re - create a completely new project with the same word documents, but using the origingal. HPJ file and the same problem presented?

  Peter,

  With a lot of relunctance, (probably because of being on holiday and in the middle of the Christmas break), I've rolled up their sleeves and rebuilt the project from scratch. (What else do you ndo when on vacation?-can think of several things). The project is bitmaps quite large, consisting of 38 separate Word Documents, 908 topics, 731 jumps, 907 keywords and 37.  This project was built in 2000 and enjoyed time has reached this size. Each year, some 15 to 20 of the draft versions are built as subjects and content changes.  The propject resulting is distributed on a netwrok involving 3 operating sites and more than 250 terminals.

  The first step in correcting this problem was to place all word documents in word 2010 format (38) project.  Before that documents previously saved in Word 2003 format and open in Word 2010 (compatibility) mode.  On the assumprtion there was a problem of compatibility between 2003 and 2010 word format causing the compiled research questions.  I saved all the latest known version of 'Good' of the project documents in this mode.

  Once all documents saved to Word 2010 format, each document has been individually then imported into the new project, the project saved and built after each document imported.  This was done for was the origin of the problem to ensure that a particular document.  None appeared.

  Once that all the 38 documents any OCD has created the last well-known CNT file.  Imported into this new project in the form of measurements of the CNT old file rather than use then file itself.  Project saved and rebuilt again.  Still good.  I used the text instead of the CNT file again just to try to eliniate hidden, coding of corruption in the file of the CNT.

  Then the sequences to browse relevant have been updated in order to meet the requirements, project archived for proken links (found nothing) or any other error.  Once again.  Nothing found.  Re-built and still saved.  No problem identified with the project.

  At this point the last well-known version has been restored in a new project just in Word 2010, format, changes in the (next) version of fault had not yet been restored to the project.  5 files in this version had a lot of changes that I have taste not individually make each change.  In order to reduce to a minimum rework them, I took the opportunity to copy the text of the documents and paste the text into the new word format documents (rather than import something that may have corrupt and coding). In each case I deliberately does not include the first or the last lines of the documents in the copied text, again try to eliminate the import of any coirruption that may have existed?  Yet once, save and rebuild the project after each import text.

  Final score, a return without erors project.  Tested on 2 different local machines (both running Win 7 with Winhelp patch applied) no error returned.  Deploy the updated on the work network this morning.  (XP systems), yet once no erors returned and full don't search feature now available.

  So, what was the problem?  Not sure that I'll never know, (I have a second project on another topic which is still in Word 2003 format, built under this version of RH9 and she does not have the same problems I had in this project).  Whatever, it was an absolute pain, many lost hours, but a positive result (finally).

  Thanks to you and the people who have offered nhave his help.

  Bryan

• A hierarchical report query SQL formatting to display the output as a tree

  4.2.1

  THM:2

  Hello world

  I have a simple request which when I run it should show in a tree like structure as seen in this link

  Hierarchical queries in Oracle SQL

  Any ideas on how I can get this output show upward in an area of report page apex? I tried to put it in a classic report, and it shows just all in one line given the length and spacing. I don't want to use the tree for this.

  Thank you!

  Ryansun-Oracle wrote:

  I have a simple request which when I run it should show in a tree like structure as seen in this link

  Hierarchical queries in Oracle SQL

  Any ideas on how I can get this output show upward in an area of report page apex? I tried to put it in a classic report, and it shows just all in one line given the length and spacing. I don't want to use the tree for this.

  I found that the standard reports and report templates are not really useful in this situation.

  According to exactly how it should be used, you might want to watch a dynamic list using one of the models of hierarchical list, but I tend to use this Tyler Muth & Rob Van Wijk. This can be used in a region in connection with a column named custom report template.

• is it possible to shorten the names of files at the same time, without doing it manually in windows Explorer?

  I have a file called 'archive', then in the archives, there are 1185 files and then each folder has subfolders in (there are 13 000 files in total).  I have to do ALL the files of 50 characters in names, so that they can be stored on a different drive.

  Is it possible to do without having to select each one and "Rename"?

  Thank you!

  Nadia

  It should not be necessary to shorten the file names.  Are you running in 256 maximum path limit of characters in the window?  If so, try using "Robocopy" (robust copy) to copy your files on the other disk.  Robocopy does not have the limit of 256 characters.  More information is here:

  "Get to know Robocopy for more powerful file management.
    <>http://TechNet.Microsoft.com/en-us/magazine/ee851678.aspx >

  also here:

  "Utility Spotlight - Robocopy GUI.
    <>http://TechNet.Microsoft.com/en-us/magazine/2006.11.UtilitySpotlight.aspx >

  HTH,
  JW

  HTH,
  JW

• Try to install the output module - file Extensions bridge CC

  Followed intsructions for installing the bridge output module, but there is no bridge CC Extensions folder in the library as suggested:

  • Copy the folder Adobe Output Module (not the folder AOM_Package_ [OS]) in the bridge CC Extensions folder in the appropriate location:

    • Windows: C:\Program Files\Common Files\Adobe\Bridge CC Extensions
    • Mac OS: / Library/Application Support/Adobe/Bridge CC Extensions
      

  • Copy the file AdobeOutputModule.workspace in the folder of workspaces under the bridge CC Extensions folder.
    

  Upward

  Someone had the same problem and not the fix? Thank you

  Make sure that you have the most recent version of the bridge CC (6.0.1) installed.

  After I installed CC Br compared to the creative clouds (https://creative.adobe.com/products), follow the steps as shown in the link for help to operate the AOM.

  Kind regards

  Ashutosh

• Retrieve data from PL/SQL block and generate the UNIX data file

  Hi all
  
  I comply the following Unix Shell Script code block. The following code was generated the file count_curdate.txt with all need info. The query gives the number of records, the partition_dt group
  
  ABC ='sqlplus-s < < of folklore > count_curdate.txt
  uname/paswd@ConnectString
  SET THE OFF POSITION;
  SELECT COUNT (*) | «, » || partition_dt of the XYZ group by partition_dt;
  "exit";
  END '
  
  But now I need to change the above code to use dbms_application_info.set_module in it. Could someone let me know how to generate the file using PL/SQL in Shell Script block. I have tried following written code, but it generates count_curdate.txt file with 0 bytes.
  
  ABC ='sqlplus-s < < of folklore > count_curdate.txt
  uname/paswd@ConnectString
  Set serveroutput on;
  SET THE OFF POSITION;
  Set feedback off;
  BEGIN
  DBMS_APPLICATION_INFO.set_module (' shm.ksh ',' get account per day ");
  FOR again IN (SELECT COUNT (*):) «, » || partition_dt as 'DCount"of the XYZ of partition_dt group);
  LOOP
  DBMS_OUTPUT. Put_line (reccur. DCount);
  END LOOP;
  end;
  /
  "exit";
  END '

  Hello, your PL/SQL is not successfully completed, i.e.,.

  This:

  ABC=`sqlplus -s < count_curdate.txt
  uname/paswd@connectstring
  set serveroutput on;
  SET HEADING OFF;
  set feedback off;
  BEGIN
  dbms_application_info.set_module ('shm.ksh','get count by day');
  FOR reccur IN (SELECT COUNT(*)||','||partition_dt as "dcount" from XYZ group by partition_dt);
  LOOP
  DBMS_OUTPUT.PUT_LINE(reccur.dcount);
  END LOOP;
  end;
  /
  exit;
  END`
  

  Should be this:

  ABC=`sqlplus -s < count_curdate.txt
  uname/paswd@connectstring
  set serveroutput on;
  SET HEADING OFF;
  set feedback off;
  BEGIN
  dbms_application_info.set_module ('shm.ksh','get count by day');
  FOR reccur IN (SELECT COUNT(*)||','||partition_dt as "dcount" from XYZ group by partition_dt);
  LOOP
  DBMS_OUTPUT.PUT_LINE(reccur.dcount);
  END LOOP;
  end;
  /
  exit;
  EOF`
  

• in the output log file bit 00's are added, why? (Do not run the attached vi. It disables all devices in your system)

  Hi all

  I've attached a zip file when co-existence.vi is the main file of vi that communicates with a USB device and returns some responses of ATR.

  The answers are stored in a log file. I have attached the log file. In the log file in three places while displaying ATR, get added some unwanted 00's. Please help me how it is and how to remove it?

  Thank you

  Mathan

  [Note: (not to run the attached vi.] It disables all devices in your system)].

  It seems that the duration depends on the value you get out of the dll (dwARTLen). You have wired it as 100, so it seems that the dll simply returns the entry. Maybe you want to check the documentation for the dll on the way to get the actual length.

  A large part of your code is very confusing...

  • You have several subVIs that are essentially the same, but with different names. Not one of these not enough?
  • What is the purpose of the loop IN the adhc.vi? Since you autoindex in a table of a line, it will be executed only once, and the result is the same as if you would remove the loop FOR.
  • Your main VI is extremely repetitive with lots of duplicate code. You have 12 instances of the file name constant, would be enough! Enable.VI is identical to disable.vi, except for a constant of diagram. Much the same constant string ("ATR: ', ' peripheral access card:", etc. "), once again, everyone is enough.

  Here a nice state machine would make all the difference.  You need only about 10% of the current code, eliminating all the rehearsals.

• Name the trace file

  I generated several trace for parsing files using tkprof. However, I have difficulty to locate the exact file of 100 francs of stack trace (.trc). My trace file name save time. Is it possible to appoint the trace file when I start tracking? (that is when I put sql_trace true).
  
  Thank you
  Romain Rolland

  ALTER session set tracefile_identifier = "" will include in the name.
  Also, it is easy to calculate the correct name of the session sid and spid.
  As this is the platform dependent, I can't provide the code.

  Please also note tracefiles open append mode. A new session with the same sid and spid to add to an existing file.

  -----------
  Sybrand Bakker
  Senior Oracle DBA

• Any way to customize the output of tag_eventfromdate to view a different date format?

  The {tag_eventfromdate} and {tag_eventtodate} out of the dates in the format DD-MMM-AA is not-very-nice. Is it possible to adjust the output format to something more human of the environment as 'November 22, 2014?

  In the live platform - only with javascript at the moment.