Hi, is it possible to change the names of files that export out of indesign while packing?

Similar Questions

• Is it possible to change the name of data acquisition device?

  Hi all

  Is it possible to change the name of device of data acquisition in a pragmatic way?

  I wish I had at the beginning, when I start the data acquisition control a name that my .net program assigns to the DAQ card. Is this possible?

  Thank you

  Virginia

  Ashly thanks!

  Virginia

• Is it possible to change the name of a HP LaserJet 4250 tray?

  Hello

  We have a HP LasterJet 4250, and we use Windows 7 64-bit.

  Is it possible to change the name of a HP LaserJet 4250 tray?

  Greetz,

  Jurrien Bruggink

  Well there's no easy way to do I know offshore. I have come across this thread on Apple support community: Print rename status bar. They're editing the PPD file to change the names of the bins. It seems that it is possible within the OS X with some serious tinkering.

  I couldn't find a place were someone was able to change the names of plateau in a Windows environment.

  I hope this helps!

  -SeanS

• Is it possible to change the name of the team?

  Is it possible to change the name of the team?

  Team license links that can help

  -https://helpx.adobe.com/contact/creative-cloud-teams.html using the team

  -manage your account http://forums.adobe.com/thread/1460939?tstart=0 team

• is it possible to change the name of a file before I download on my pc

  When I download a file it appears in my download as «0.pdf» folder If I have more than one, it a number after the document. Then I have to open each one to see what it is.
  Windows 10 64 - bit

  If you change your download settings to a single folder set to show the Save as dialog every time, you can change the name of file as well as to choose the location. Please see this article to find out where to change this setting: Start, homepage, tabs and download settings.

  Does it work?

• Can I globally change the names of files and or directory to lowercase to uppercase?

  in Windows XP or in Windows 7, globally change the names of files and or directory to lowercase to uppercase?

  A single configuration change probably will not accomplish this.

  Your best bet is probably the freeware "Bulk Rename Utility" program which has a section dedicated to change the case of file names.

  Bulk Rename Utility: <> http://www.bulkrenameutility.co.uk/Main_Intro.php >

  HTH,
  JW

• changing the names of file massively

  Dreamweave can change the names of files massively?
  for example, a series of files named today_001 through today_100 and I want to
  Rename the files through tomorrow_100 tomorrow_001.

  If you have not yet linked to these files in your pages, you'll love this
  renaming utility
  for use outside of Dreamweaver.
  www.1-4A.com/rename

  "marshachan" wrote in message
  News:ff8ccb$GJC$1@forums. Macromedia.com...
  > Dreamweave can change the names of files massively?
  > for example, a series of files named today_001 through today_100 and I want to
  > rename the files through tomorrow_100 tomorrow_001.

• Anchor link instead of menu on a page of the site / is it possible to change the name of the page menu?

  Please anyone knows, if it Is possible to change page name if menu menu made by link anchors?

  The page is only one and I have found no other possibility how to rename in the page properties.

  
  

  For example, I need on this page:

  http://zveropark.SK/

  
  

  
  

  name of the page is:

  
  

  zveropark I 1. losia farma na tradition

  
  

  When I click on TLUMIČE - I want the name change of page for: zveropark I tlumiče

  
  

  etc...
  

  
  

  Thank you, Elena

  You would need to change the name of the page or the name of the anchor, if you use the anchor to link to the specific page section.

  I checked the site and it seems that you made the separate pages for each section that works correctly now?

  Thank you

  Sanjit

• CAN NOT MAKE RECORDS OR CHANGE THE NAMES OF FILE 0N ALL RECORDS

  CAN NOT DO ALL RECORDS IN THE ACCOUNTS - CAN NOT DO ANY CORRECTION ON FOLDERS-PRESS FOIDER ICON BUT NO ACTION OR HOW TO CHANGE THE NAME OR INFORMATION ABOUT THE FILES

  What happened a bit in the past, but we see a lot more often recently. Here are two options.
   
  
  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
  
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
  
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
   
  
   

• Change the name of files and folders in data warehouses

  Is it safe while a virtual machine is running to change the name of the VMDK files and folders in a data store?

  I discovered that a VMS VMDK files have a different name for the virtual machine itself, then someone changed the name of the virtual machine after you have created the records

  I had to do it a few times, will try to document the process that I follow.  If you have many warehouses of data, then make a note of what data store, the machine is in.  The next step is to unregister the virtual machine from vCenter / ESXi

  Then, you need to enable SSH on your ESXi host

  Use Putty or something similar for you connect to the ESXi host

  Run the following commands (in italics)

  cd vmfs/volumes / that is, if the data store that contains the virtual computer is named datastore1 then you would run cd/vmfs/volumes/datastore1

  Then run ls to verify that the virtual machine file is here

  Rename the folder by using mv

  Change to the folder with cd

  Rename the nvram, vmsd, vmx and running again is to say the mv

  MV oldname.nvram newname.nvram

  MV oldname.vmsd newname.vmsd

  MV oldname.vmx newname.vmx
  

  MV 1234.hlog - oldname newname - 1234.hlog

  Rename the vmdk with vmkfstools EI oldname.vmdk newname.vmdk

  Edit the vmx with vi newname.vmx

  Replace references to oldname to newname in this file

  Register the virtual machine with the ESXi server and it should be OK

  This link gives more details and other methods VMware KB: rename a virtual machine and VMware ESXi and ESX records

• Changing the name of file panel

  Hi, import, change of name of file panel is not popup menu with options (such as custom name). What should I do?

  Hello!

  Make sure you check the box 'rename files '. You can then access the drop-down list. If you don't see what you want to try the Edit button... down to create/modify the model name change you need.

  

• Changing the names of file in Lightroom

  Due to a problem with the user I had implemented the incorrect year in Nikon D80.  When I import images in Lightroom the date becomes the first part of the file name

  for example 20090212_Mexico_HMP_0002.NEF

  So I was wondering how to change the date (Date time Original, Date time digitized to Date fields hour ad) in the EXIF section for 426 photographs.  If I can change that, I can use the library > order Photo rename to change the name of the file

  Thank you

  I think that if you select all from the display of the grid, then choose:

  Metadata > edit Capture time

  then fix the first photo of a specific capture time, I think it will adjust all others based on the amount needed to adjust one based on the following comment in the help file:

  "If more than one photo is selected in the grid, Lightroom changes the capture time for the active photo of the specified adjustment. (The active photo is presented as a preview in the Edit Capture time dialog box.) Other photos of the selection are adjusted by the same amount of time. If more than one photo is selected in the Filmstrip in Loupe mode, comparison, or investigation, the capture time is changed only on the active photo"

  I suggest you try it first on a few images.  There are probably other ways as well.

  The f

• Generated by changing the names of files Wizard

  I used the wizard of Coldfusion/Flex applications to create master pages and detail for a very simple application.
  
  The name of the table that I used was "user_tbl" and the template created .as file is named Useruser_tbl.as. The app works just fine as it is, however, I did not like the name generated for the .as file.
  
  I have changed the name of the User.as file and all the references appropriately changed the master views and detail (Users.mxml and User.mxml)
  
  Now, when the application is compiled, I get an error:
  1067: constraint implied a value of type com.myapp.views.detail: use a com.myapp.models: User type unrelated. MyApp/src/com/myapp/views/detail User.mxml /myapp/src/com/myapp/views/detail/User.mxml
  
  Changinging the name of the file and references back solves the problem.
  
  What else do I need to change to get the file name change to work?
  
  Any help would be appreciated.
  
  pWp
  
  
  
  
  

  Obviously my import declaration is ignored. I used the full package name 'com.myapp.models.User' in the detail .mxml file and the problem stopped.

• Is it possible to change the "name of my e-mail account?

  Top right of the home screen, it shows your photo email and account connection. Is it possible for me to customize the name it shows (as opposed to show him your email)? Thank you!

  Hello AllenHunter

  You can change this picture in Windows by clicking on it and by selecting the image, the name of the account is linked to your microsoft account name, if you see an email address, then in most cases it's just not full: https://account.live.com/summarypage.aspx
  Click on the link above and change your screen name, after a few minutes he has to change within Windows as well.
  Hope this helps
  Yuri

• Is it possible to change the name of compostion before default?

  The new model name by default when you precompose a layer is filled with auto as the name of the layer with 'Comp 1' added as a suffix. I prefer 'precomp' to be my suffix. It may seem like a small thing, but in the projects that I am precomposition much it save me some time to have the default name correspond to my preference. Isn't it possible to change, even if I have to modify a .txt file?

  There is no setting for this preference. My personal preference is to use the keyboard shortcut to create the demo and then just start typing, and then press the Enter key, and I'm done.