iSCSI hardware vs software adapter

Similar Questions

• iSCSI iSCSI Software adapter or Broadcom adapter?

  This is a bit of follow up a thread on a previous post. But I noticed that my BL490c G6 5 hosts have a software adapter and Broadcom iSCSI adapt. Although I have nothing under Broadcom cards.

  Is there a difference in performance between these two? In my head, material should be better than software, but it seems software as default.

  I found this KB, indicating he may be some Fiddlers involved to get ESX to use Broadcom cards, but is it useful?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1025644

  The iSCSI SAN is a StorageWorks P4300 G2.

  The BCM5709 equivalent and can slightly reduce the amount of work the CPU has to do, but does not support Jumbo Frames.

  If you are network switches or a table do not support frames then using the capabilities of unloading of these NICs is good.

  If frames Jumbo is supported by the two switches and table so it is best to use the iSCSI HBA software.

• Hi people. Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Hello

  You will be able to use the watch in Europe.

  There is no regional differences in the hardware and the software can be configured to your chosen region. The supplied USB power adapter will have to pine trees located in the United States. A travel adapter will allow you to connect it to the European outlets.

  Alternatively, you can buy an Apple USB power adapter that is located in your country of destination / country.

  For example:

  • 2-pole:
    • http://www.Apple.com/FR/shop/product/MD813ZM/A/Adaptateur-secteur-USB-5-w-Apple? FNODE = 83
  • UK 3-pin:
    • http://www.Apple.com/uk/shop/product/MGRL2B/A/Apple-5W-USB-power-adapter-folding - pins? FNODE = 83

• T61 wireless hardware or software failure?

  When I finally used (in September), my wireless on this old T61 (6459-CTO) worked perfectly, but tonight I can't even view available networks. I know that my local network wi - fi doesn't work because the other devices can connect, but cannot see it or other networks of neighbourhood on this ThinkPad notebook. Suits the list of networks available in that it displays a message «Windows cannot configure this wireless...» "I am running Windows XP SP3, the machine is vintage 2008, ipconfig/all said the wireless card is a 11 a/b/g Wireless LAN Mini PCI Express Adapter, Device Manager shows the device works correctly, hardware and software-defined radio (ThinkVantage) switches are on, and the wi - fi on the front panel led is bright and blinking occasionally. There were a few Microsoft Updates since wi - fi last worked, but nothing has changed to my knowledge. How can I determine if it is a software or a hardware problem? Thanks in advance - JCW2

  Download and burn a 'live' DVD in Linux, like mint and boot from it.

  If you are able to connect wireless here, the question is within Windows.

  If this is not the case, there is a problem with the hardware somewhere.

  http://www.linuxmint.com/Edition.php?id=105

  Good luck.

• Hardware or software conflict?

  Problems with USB adapter for sagem wi - fi, network freeze all the time and therefore VERY unstable Internet, BSOD problems connection (a LOT). This, the software being updated through windows update, cleaned of unnecessary software, reconfigured start up with the command "msconfig", the updated drivers via Device Manager but that did not help because after the digitization of 14 obsolete found drivers drivers need more updated (online driver update software too expensive!) What to do next? I was at my computer for 3 days in a row! The network actually works because with my iPad, I have zero problems, it looks like a hardware or software incompatibility with my pc (OS Vista professional) problem. Maybe I need a new PC? Help!

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.

  http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303

  http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  Go to start > search/run > cmd > msinfo32 and include it in the upload

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

  Please also go to start > run > msinfo32 and record the results.  Send it with the DMP files, thank you.

• Update hardware and software Qosmio G30-198 for hight performance

  Hello

  I have a Qosmio G30-198.

  I have to use Autodesk Civil 3D program in the laptop.
  This is a CAD program that requires a lot of ram and a transmission of data high-speed HARD drive.
  To do this, it is absolutely necessary to update hardware and software for civil use with good performance.

  I need to buy and install HDD SSD, install more RAM (which is the maximum allowed in this computer?) and I need to install Win 7 Professional 64 bit.

  Please,

  If anyone can tell me how I can further improve the performance of the laptop, please tell me.
  I don't know what steps I need to keep.

  Can you help me?

  Thank you very much.

  Hello

  The RAM can be expanded up to 4 GB
  As far as I know this laptop supports the Intel® 945 PM Express chipset and supports this chipset may 4 GB of RAM
  http://Ark.Intel.com/products/chipsets/22817

  The HDD or SSD drive update shouldn't be a big problem.
  Usually the built in SATA controller should be able to manage the common SATA SSDS

• Does iOS App Store allows the old inherited app to download to support more hardware and software?

  I'm using iphone 4 on ios5.1 and can not download waze, instagram etc... because they ios7.0, app or the new paypal required ios8.0. (so even if I upgrade my ios to 7.1.2 I won t be able to use it, it s a big problem)

  There are many applications no longer works on ios5.1.

  At Apple archived older versions of applications and will make available this backwards compatible?

  Developers can submit apps for obsolete equipment and iOS version outdated on the App Store?

  Does iOS App Store allows the old inherited app to download to support more hardware and software?

  Thanks for your help.

  You can download older versions of applications if you have a computer or other device running a newer version of iOS. This explains how do.

  Install the latest compatible version of an application on an earlier version of iOS or OS X - Apple support

• difference in the hardware and software calendar

  Hello world.

  I have a few questions about the time of hardware and software.

  1. What is the difference between hardware and software?

  2. What does hardware mean? PC or DAQ as usb 6211?

  3 when I use "DAQmx Timer", it means that I use the hardware timing?

  Thanks for your help!

  Hi Xiang00,

  >> 1. What is the difference between hardware and software?

  Hardware timing is more accurate, because it uses the on-board clock. Avoiding the is less precise because it depends on the performance of the PC.

  >> 2. What does hardware mean? PC or DAQ as usb 6211?

  "Hardware" means the hardware such as USB-6211 DAQ.

  >. 3. when I use "DAQmx Timer", does this mean that I use the hardware timing?

  Yes. You can find more information in the knowledge base DAQmx Timing and sampling frequencies.

  Best regards

  Yusuke Minami

  Sales engineer, OR the Japan

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• •To play .mp2v and .dvr-ms files, you must have a DVD decoder hardware or software installed on your computer.

  To play .mp2v and .dvr-ms files, you must have a DVD decoder hardware or software installed on your computer.

  You need a DVD decoder.  Maybe VLC media player will work.  If this isn't the case, you will need to buy a program to read these files (or DVD) on your computer.

• Error message: Windows could not open possibly due to a hardware or software upgrade with a black screen and white on Windows XP starts.

  Original title: suddenly Windows XP does not open

  After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.

  Hi Brian,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  Black screen on startup

  Hope this information is useful.

• Error: "corrupted error reports are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer. »

  Original title: my computer was "rebuilt" with all the new parts June 2011. Logging on his shot and miss it may stay on or shut down and restart. I have this message when I turned on my pc this afternoon:

  Corrupted error report.

  Unfortunately, the error you report submitted is corrupted and cannot be analyzed. Reports "damaged errors are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer.

  When I turned on pc today is showed a blue screen and can something on a disc because the disc did not work properly?

  I paid for all the new parts for my computer and the computer technician has assured me that all the work was completed and correct. I bought the power supply (1) mother board, cards (2) 1 TB of memory. (2) hard drives 1 TB. (1) card reader and other elements appearing on my Computer Geek Bill.

  My music files are no longer mp3 but .oma. He/the Tech added its own files and records of music of World War II. These game. The drive D drive or slave who held my music, he said he wiped clean.

  I need to know these error reports will completely close my pc and all the information will be lost?

  Hi satindoll11233,
   
  I recommend you to disable the auto reboot system error (this option prevents Windows to reboot automatically if a Windows error to fail) of the startup options safe mode to know the exact error message or error code originally this problem.
   
  For more information, see:

  A description of the options to start in Windows XP Mode

• How to enter the bios and virtualization of hardware (or software) turn off? On Hp 3400 mt series

  I have HP 3400 MT SERIES

  motherboard: Foxconn 2ABF 1.20
  Version of the BIOS FRIEND brand: 7.14

  How to get into bios and disable (hardware or software (I don't know)) virtualization that I have to open mac osx 10.7 in vmware

  Enter the BIOS and look in the Security section, as shown in the image below. If that's what you see, then activate the virtualization technology and it's done. You will be able to use Sun's VirtualBox and other virtualization programs later

  

  Best regards

  ERICO

• In XP, error at startup 'Windows couldn't start. A recent hardware or software change might be the cause.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.

  2. choose your language settings and thenk click 'next '.
  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  State 0 xC0000001
  Info: The selected entry could not be loaded because the application is missing or damaged.

  But, instead of file: \Windows\system32\winload.exe I get file: \$Windows.~BT\windows\system32\winload.exe.
  

  Hi imranhussain1979,

  ·         You have made any changes recently?

  ·         When it was working fine?

  ·         You have Windows XP or a later version of Windows?

  Step 1: The error seems to refer to a later version of Windows. Restart the computer and check if the installed operating system.

  Step 2: Try to start the computer in safe mode and check the number.

  Start your computer in safe mode

  Microsoft Windows XP: start the computer in safe mode

   

  Respond with more information so we can help you best.

• I tried to reload XP using my drive but it failed due to a hardware or software problem, XP is stuck in a loop and does not load. How can I clean my disks and reload XP?

  I have a HP XP of 2005. After a year of use of a premium support tech, my OS must be installed.

  I used the disk and followed the installation steps. I received a message on there was a hardware or software that would effect the install and may not work properly. In any case, I continued and of course I am stuck in a loop.

  I can't go to my office.

  First of all, I get a notice on a black screen to select the operating system to start. There are 2 identical choices. Microsoft Media edition.

  Once selected, a screen appears. "We apologize for the inconvenience, but Windows did not start successfully.
  a recent hardware or software change might have caused this. "

  I have enough to make choices and none work.

  1. choose the last known good configuration to return to the most recent settings that worked. :

  2. do not apply

  3. There is a selection in the Safe Mode with command prompt and if I had used the F8 key to reinstall this option would have worked. To do this, do not hurry.

  what I get is a list of drivers that are installed.

  I'M IN A LOOP BETWEEN CHOOSE TO START WINDOWS WITH MICROSOFT XP THEN A NEW SCREEN APPEARS, WHATEVER I HAVE THAT LISTS THE CHOICES ABOVE.

  I need help reload my OS and wipe the hard drive clean. Is there a software I can download to help?

  Hi btbtms,

  You can follow this link to find out how to install Windows XP on your computer.

  How to install or upgrade to Windows XP