iSCSI LUN on a Synology changed - how to reconnect?

Similar Questions

• Routers changed; How to reconnect time capsule

  Changed to Earthlink DSL to AT & T u-verse fiber and time capsule airport is no longer back up; AT & T set new router; I want to use only the Time Machine backup. What I have to do a hard reset of time capsule? Is there an easier way to reconnect with my iMac? I have now connected time capsule directly in my iMac, but still no recognition. Thank you.

  Whenever you change the modem or modem/router, or change service provider, the time Capsule airport must be reset to the default settings and then set it up again to work on the "new" network

  A hard reset on the Time Capsule will achieve this goal. Then, make sure that the Ethernet cable connects from one of the four <>- on the Uverse router/modem LAN ports to the "O" on the Time Capsule WAN port.

  Set up the time Capsule still... you can use the same name and password if you want, or set up a new name and password if you wish.

• How to use a larger than 2 TB iSCSI LUN?

  I have a server ESXi (4.1 U1) connected to an iSCSI NAS network, where 4 LUNS have been defined and presented to this host. all LUNS are 3 TB in size. ESXi correctly sees the LUNS and recognizes their size 3 to.

  I know that the maximum size for a VMFS data store is 2 TB, so creating a single data store for each logic unit number would be a waste of space. I know also that the creation of multiple data on a single LUN warehouses is not recommended, and it does not seem work either: If there is already a data store on a LUN, the just vSphere Client won't let me create something else here, it is not even list it in the list of available devices for the creation of data warehouses.

  I know that I can use extensions to create a store of data from more than 2 TB, but it seems to work across multiple LUNS: when I try to increase the size of a data store using the same logic unit number where he resides, ESXi is trying to increase it in fact, it won't go above 2 TB in size.

  My question is: is it possible to combine two extensions in the same logical unit number, so actually creating a composed of 2 extensions 1.5 TB 3 TB data store?

  If this is not possible, is it possible to create two data warehouses in the same iSCSI LUN? I know that this is not recommended, but it should at least be possilbe... but looks like it's not.

  If this is not possible, then... How to make use of these 3 to LUN?

  You can carve up the LUN and then it recombine.

  How to use these LUNS 3 TB is to get rid of them and the re - present as< 2tb="">

• How to clean and do a fresh install with attached iscsi LUN?

  I intend to migrate both esx 4.1 with esxi5.1 hosts before you wipe and do a clean install.  Each host is connected to two iscis without, with 4 LUNS of each SAN attached to each host.  Each lun
  spread over 3 degrees is. I plan on vmotion (not storage vmotion) guests from one host to another to make the upgrade.  I'm stuck on the determination of what will happen to the iSCSI LUNS after I
  upgrade to esxi5.1 guests.  It seems that I should just be able to reattach, but I'm not sure.  Can I just attach the LUNS to the new installation 5.1 hosts and see all the
  VMDK intact, or is there something that I am on?

  And should the migrated to another host virtual machine continues to run on the iscsi san, while I upgrade of the host, they were released since then?  It seems that storage must be removed from the process as the LUNS
  should not remain attached to the host after it is cleared and the iqn name no longer exists.

  
  Am that I on the right track here?  What Miss me?

  jackjack2, understand you this? I went ahead and moved to esxi 5.0 U2 of ESX 3.5 u5. Had to perform clean install and I have an iSCSI SAN. That's what I did:

  1 a taken a screenshot from all my ESX host configurations. Go to configuration-> software adapter-> click on the iSCSI--> properties--> iqn copy map and alias-> click the dynamic discovery tab and note any IP address. You may need these IPs with the discovery of data warehouses later.

  2. after having documented the configs, put the host in maintenance mode.

  3. after maintenance, remove the host from the vcenter server. Connect directly to the host and close.

  4. remove all the network cables. Cable marking help before you detach the cables.

  5. clean install esxi 5.0.

  6. after installation, before rebooting, set the network cables.

  7. configure and test the management network. If your network management test fails, see if you have anything that is entered in the id vlan. Chances are that your port is not shared resources in the physical switch. In this case, remove the id vlan (during the configuration management network) work.

  8 bring the vcenter server host.

  9 configure the network, dns, time, etc.

  10 Add a software iSCSI adapter. This card will have a new iqn. Either you provide this iqn to your SAN administrator so that it can update side SAN, or you can use the old iqn name.

  11. in my case, I made a copy of the new iqn and then deleted. Entered the old iqn name obtained in step 1. Additionally, entered the alias (since one was present before). After that, a new analysis and update still does not fill in data warehouses. So, I went to the properties of the iSCSI adapter and then discovered added tab dynamic addresses IP that did not exist before (otherwise, you will need to enter the virtual IP address of the cluster that you data store (s) belong to). Once the IP addresses have been added to the dynamic discovery tab, he asked if I wanted to rescan the HBAs. I said yes and viola! my data stores have been populated.

  12 Add the host to the cluster.

  Note that you can add iSCSI adapter when you affiliate you the host to the cluster. However, in this case HA will not be happy because no heartbeat of data storages will be detected. In addition, when data warehouses are discovered it may appear initially as not mounted. Don't panic. After a minute or two it will be mounted.

  I hope this helps!

• Attach an iSCSI lun to 5.1 and 5.5 to move virtual machines

  I have 1 Server esxi 5.1 I've built a bunch of VM now connected to a 4 TB iSCSI LUN.

  I gave recently 2 new 5.5 servers.

  Ideally, I would like to connect these 2 servers to the same lun iSCSI is used by the Server 5.1. Then, stop/forget each VM on 5.1, browse the data store on 5.5, add to the inventory and it start up. After all the machines are moved, I can do some changes on the material on the Server 5.1, it blow and install 5.5.

  I plead for the trouble, or is a reasonable way to do?

  Welcome to the community - Yes that works-

• ESX 3.5 and iSCSI LUNS

  Good so I'm setting up my servers ESX using iSCSI LUNS.  I do not have the LUN in a VM, I want the servers to use.  Is it possible to do?  And how can I do for that implemented?

  Scott

  You must enable initiator initiator or software hardware

  If you go to the inititiator of the software, you must enable on each ESX host, by going to the configuration of the VI Client storage adapter tab. (you will see something like vmhba32, activate it)

  Once it is enabled, you must add your target (as we are talking about software initiator, it supports only dinamic discovery).  Recommendation, isolate the network cards that will connect to the iSCSI network.

  concerning

  Jose

• I want that my previous method of search bar back. Changed how update the search bar works now and I hate it!

  Latest update of Firefox changed how to search bar functions. This should NOT be done automatically without warning of a person on the changes. I have problems using this new method of research, and I hate it. I want than the previous method return. A contributor has tried to help him, I guess. But what he suggested did not work. I can't fix thru on Firefox. A window opens and does nothing. About Firefox does nothing, but look at me. I don't know how to enter the configuration of Firefox. I appreciate the-edmeister tried to help me, but nothing has changed. There, someone knows how to give back me my old search bar?

  It's not On Firefox's Subject: config as explained here:
  https://support.Mozilla.org/en-us/questions/1035119

• When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features...

  Original title: how to uninstall client services for netware?

  When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall client services for Netware... But it is impossible to find... Help?

  Hello LindsayJune,

  Click the Start button.
  Click on Control Panel. Select network connections
  Right click on 'Connect to the Local network', then click 'properties '.
  Search for "Client Service for NetWare" slot "this connection uses the following items."
  Click it, and then click the "Uninstall" button
  Restart your computer.

  Uninstall client for Netware feature will allow the option of quick change of user on your computer.

  I hope this helps.

• How to reverse change how open .dll files?

  How to reverse change how open .dll files? I changed accidentally, trying to open only ONE file, most of them to open with Microsoft Picture It! software and now some things do not load, and my USB ports are completely useless!  Help. How to reverse this mess? OR should I simply delete all these and download replacements? A lot of new files that I downloaded automatically changes in Pic! icons, once that they finish downloading... - and I cannot restore, because he says that nothing has changed.

  Thank you!

  Hello

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest running the fix that is present in the link mentioned below and check if the problem is resolved.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  Method 2:

  If the problem started recently, so, I suggest you do a system restore and see if the problem is resolved. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• all the file (Application) has changed how to fix .exe type

  all the file (Application) has changed how to fix .exe type

  Hi Jonathan Charly.

  Remember to make changes before this problem?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  
  Method 2: run the fixit available in the link below and check if that makes a difference

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• How can I change how long file names & file can be?

  How can I change how long my file names & file can be?

  The path length limit cited in the article referenced by Abdul R is 260.

  It depends on the length of the full path to the file (for example, C:\Program Files\filename.txt). Windows limits a single path to 260 characters. That's why you can sometimes get an error when copying a file with a very long file name to a location that has a longer path than the location of the original file.

  -------------------------------------

  However, there are various subtleties that reduce that number in practice to 255 (or less), including all spaces.

  We start with the absolute limit imposed by Windows. The API operating system puts a limit (called MAX_PATH) 260 characters for the display name with the included path. This number is often cited. However, the current limits are smaller due to various other restrictions. For example, all names have to have a terminator at the end normally null only the computer see this fine marker, but it is considered as a character if there are really only 259 characters available. (Forget to count the null terminator is a common mistake). A three other characters are used by the designation of the drive or volume (for example, C:\). Thus, the limit to name all the folders and subfolders as well as the file is reduced to 256 characters. However, no files or a folder may have a name more than 255 characters. This includes spaces and some backslashes used as separators. This limit of 255 characters per object is imposed by the way Windows to encode the characters but other considerations usually impose lower limits.

  of http://vlaurie.com/computers2/Articles/filenames.htm

  ---------------------------------------

  More details

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa365247 (v = vs. 85) .aspx

  =====================

  And now, the grand fanale, the answer to your question:

  You cannot change the limit of the length of the path. It is imposed by various requirements and is coded in the system hard. You can set the 'balance' between the files and folder/sub-folder names. For example, use short directory names in order to use more long filenames.

  ======================

  All this can be a nuisance to the user. A file name may be OK when originally created but be too long if the file should be copied or moved to another location whose path is longer.

  There may be additional complications if the files are to be burned to CD or DVD.

  Tom Ferguson

  Italics are added. They indicate a source citation as indicated.

  TF

• my toolbar has changed how can I change it back?

  my toolbar has changed how can I change it back? I'm really panic I had my computer but I closed this morning and didn't stop him completely. Today, when I got home, I opened my laptop and my toolbar has completely changed! I need help! How can I get it back to normal?

  Have you installed IE9?

  Press F11 to exit the full screen.

• How can I change how my computer wakes from sleep

  I have a windows computer 8 and I want to know how to change how my computer wakes up from his sleep as a mouse movement, pressing keys or open the lid?

  Original title: windows 8

  Under Power Options.  You can do this more easily on the desktop:

  1. Find the power icon near the clock. Right click and select "Power Options".
  2. On the left, click on change this that the cover and you will find that and other options.

• Has anything recently changed how the check of the Image on the forms?

  Has anything recently changed how the check of the Image on the forms?

  
  

  Problem

  In these few days we noticed the verification of the Image on our forms does not preclude the submission form when the values do not match.

  Form design

  To create our forms, we use the procedure described here: http://www.thrise.com/blog/create-business-catalyst-WebForms.htm . Basically, we create the form with all the fields we want to, including the verification of Image ({module_captchav2}) outside the BC. We then put the code form on a page in British Colombia and tap the Actions button then choose optimize the content.  This creates a Web form (Site Manager > Web Forms).

  The form will not work correctly: we could submit the form and get an email and Image verification would prevent the submission form if the values don't match.

  Test
  We have confirmed on two other sites, forms correctly thwarting form submission when the captcha does not match are now allowing these forms to submit (emails are always received).

  When we create a form in British Colombia, verification of the Image fact work. So we guess something changed with what happens when the button optimize content or how the check of the Image. 

  
  

  Although some not, we believe that we used to display the field of captcha with the other fields of the form when you look at the form in British Colombia (Site Manager > Web Forms), but we don't see it now.

  

  Notes

  JQuery validation check required fields, including the field of Captcha, are not empty.

  We create forms using the procedure described above, because we want to use controls of sensitive form of the Bootstrap instead layout table tags generated during the construction of the form in British Colombia.  Be able to generate startup code, while the form of construction in British Colombia would be ideal.

  We believe that if we were to display the captcha field with the other fields in the form when you look at the form in British Colombia (Site Manager > Web Forms) that the Image verification will not work correctly.

  Verification of image above refers to the choices under the Site Management > forms > misc. However, when you look at the page in the browser it actually says 'Enter verification word in the box below.

  

  

  Here is an example of an already optimized form on my site in sandbox (feel free to submit the form): http://robertstastyvittles.mybizzuka.com/contact-us

  Thank you

  sepyh

  This guide, that I personally would not follow because it neglects several key elements you need for BC forms work properly, I'm surprised that has no mention of the use case or notes of those somehow.

  -Because you have carved in the script BC for the captcha form part you will not get a correct script error on submit for the captcha. This is the first problem there.

  D ' other hand you him have not set to force validation captcha on the form in the admin. Under Site Settings > Captcha is where that option life.

  Nothing has changed in British Colombia for the captcha feature, your missing just parameters and code to make it work as expected.

• ISCSi LUN Vmware question

  I have two luins iscsi for vmware build hook etc. up to an emc celerra server.

  question-

  If I extend the iscsi on celerra lun in vmware puts it auto-mattically updated space iscsi LUN or is there more steps involved.

  Hello.

  There are more steps involved, after performing the operations on the Celerra.

  Use http://kb.vmware.com/kb/1752 as your starting point.

  Good luck!