ISE 1.2 CRL

Similar Questions

• ISE - whereby the CRL broke all our certificate authentication

  Dear all,

  We have a strange problem with ISE 1.2 (899).

  Some of our clients (PC, printers, IP phones) use certificates to authenticate over the network.

  Printers and IP phones use the same product CA certificates (for memory we call it CA Alpha) but the PC you are using certificates provided by another authority of certification (called CA Beta).

  The question that if configure us CRl for CA Alpha (CRL download is OK, checked with tcpdump) we saw that all clients (clients using CA Alpha or beta) cannot authenticate, and display error messages.

  12514 EAP - TLS failed SSL/TLS handshake because of unknown CA in the client certificate chain

  SSL Alert: code = 0 x 230 = 560; source = local; fatal = type; message = "Unknown CA - error unable to get local issuer certificate"

  47726909679936:error:140890 B 2: SSL routines: SSL3_GET_CLIENT_CERTIFICATE:no certificate returned:s3_srvr.c:2720:

  However if configure us CRL for CA Beta there is not this issue.

  Anyone who has experienced the same problem?

  Or y at - it ideas how can debug us the issue?

  Thank you in advance.

  Best regards

  Erik Molnar

  Trusted Cert ISE list is not entirely read when a corrupt cert is present
  CSCun41732
   

  Description

• ISE and SHA256?

  Hello

  I got many errors of certificates.

  When ISE Server tried to retrieve the CRL: Verification failed - CRL may be signed by all incorrect or unknown

  When the client tried to connect using EAP - TLS: X 509 decrypt error - certificate signature failure

  ISE does support SHA256?

  Thanks for your help,

  Patrick

  SHA 256 will be supported in point 1.1 of the ISE. 1.1 of the ISE will be FSC in March (this month)

• MDM registration fails with "out of find CRL, unknown CA.

  I'll put up a few classes worth of iPads for a local school and a few problems getting iPads recorded on the Apple MDM server.

  We have a mac mini to the latest version of El Capitan and iPads to connect by using the domain name (theserver.mdm.theschool.edu).  The domain is registered and administered by a third party and they run the main site (theschool.edu), but they passed on to all applications on the subnet of mdm (i.e. *. mdm.theschool.edu to our LAN (ASM was able to communicate with our server using theserver.mdm.theschool.edu, so we know that it works). nslookup and the ping from inside the local network is theserver.mdm.theschool.edu without problem.)

  Because we cannot mess with the primary DNS for this project, I use the DNS on the mac mini and send all our subnet of mdm requests to this server.  All iPads use this server as a DNS server address and have no trouble accessing it. Any unknown applications are transferred to the primary DNS server.

  I created a domain in Open Directory for our local subnet (mdm.theschool.edu) and the captain the mini mac.

  When I try to save an iPad via the web site server, it fails and I only see it in the newspaper:
  Jul 22 15:23:21 salome xscertd-helper [2261]: could not find the CRL, unknown CA: F9D65C0B-42E7-4EBE-96A1-BB5F2EC0EF2C

  I use free free certificates.  CA in the message changes each time.

  I can download the certificate that I use for the iPad with success, just not register actually unit. I had a quick glance at all the certificates that I can see and they have all what looks like the correct CA in them.

  Where can I find more diagnostic information?  Why CA continue to change (corruption, something caused random data not specified...)?

  I could be wrong, but as I KNOW MDM will not work with free certificates, you need to get a certificate of push Apple related to one identifier Apple. You don't mention in your question.

  In addition, according to:

  https://help.Apple.com/ServerApp/Mac/5.1.5/#/apd05B9B761-D390-4A75-9251-E9AD29A6 1D0C

  "To use the Profile Manager as a service of mobile device management (MDM), OS X Server must have a static network address and a fully qualified domain name and may not be on an isolated network."

  C.

• "There was an error connecting to server Apple ID" not reliable CRL issue

  I started getting errors connecting to my Apple account on iTunes/App Store / iBooks etc., I noticed today.

  In an attempt to connect, it would return the message "There was an error connecting to server Apple ID"

  

  This debugging with Wireshark, I noticed that iTunes has been disconnected as soon as he saw the server SSL certificate.

  I opened the url field that he was using (https://gsa.apple.com) in Safari to see if reported certificate issues, and he confirmed that the intermediate certificate, although valid, could not be verified on LCR this is because he believes http://crl.apple.com/root.crl is unreliable CRL.

  

  Other computers, OSX, I checked are used the same certificate and validate the certificate successfully.

  I tried to set the certificate to always trust, but it has no effect.

  I changed Keychain Access-> Preferences-> Certificates-> certificate revocation list (CRL) of "Best tent", which seems to fix the problem, but I'm not keen on this change, because it could weaken the security of my computer compared to "demand if the certificate shows."

  Is it possible to restore the confidence of OSX CRL for this problem?

  In fact, I found just Keychain Access from another computer-> Preferences-> Certificates-> CRL (CRL) list is set to "Best tent", and causes 'Require if the certificate shows' the same question, so I guess it's a problem with the server Apple ID certificates themselves.

  I think I put the CRL settings to "Demand if the certificate indicates" some time to try to improve security. At one point, until recently, the https://gsa.apple.com worked with these settings so perhaps they changed the intermediate certificate, which presents the problem of CRL unreliable. It is http://crl.apple.com/root.crl and not https seems suspicious and could be the source of the problem untrustedness.

• I would love to see my idea of ISEEDS Apple. Wireless. Bluetooth headsets in the form of seeds. No more son. And the landslide simply out of the back of the phone.  They are always charged. A simple click of your thumb to the rear and an iseed flicks or

  I would love to see my idea of ISEEDS Apple. Wireless. Bluetooth headsets in the form of seeds. No more son. And they simply slide to the back of the phone.  They are always charged. A simple click of your thumb at the back and an iseed movies out. And an Apple healthy seeds

  Garry Graham

  Please you not to Apple here. This is a user forum. You can share your comments with a Apple. They will not respond, but at least they'll know your suggestion.

  http://www.Apple.com/feedback/

• Choose ISE or Vivado Xilinx tools for a specific compilation of FPGA

  Hello

  Is there a way to specify what version of Xilinx Compilation tools to use when compiling an FPGA VI? I want to try the version Vivado tools rather than the version of ISE to see if there is an improvement. I have listed some information on my setup below.

  It's my current setup:
  NI5772 / PXIe7966 digitizer and FPGA
  SMU-1082 chassis
  SMU-PCIe8388 / SMU-PCIe8389 controller
  LabVIEW 2014

  In the past, I used the LabVIEW 2014 FPGA Xilinx tools 14.7 Module to compile my code. But I also want to try the version of Vivado, "LabVIEW FPGA Module Xilinx tools Vivado 2013.4 2014', to see if it gives better results."

  Page-based "compatibility between tools Compilation of Xilinx and FPGA hardware OR" here:
  http://www.NI.com/product-documentation/53056/en/
  Looks like the PXIe7966 FPGA must be compatible with the tools of Vivado 2013.4.

  I tried to uninstall the version 14.7 ISE tools, and install the 2013.4 of tools Vivado (so Vivado 2013.4 tools are the only xilinx tools installed on the computer). But LabVIEW complains that the ISE 14.7 tools are not installed and does not compile the FPGA VI.

  Thank you!
  Michael

  This FPGA is a Virtex-5 FPGA, so you're stuck with ISE.  You need a card FPGA that either uses the architecting chip (I think it was only in cRIOs) or 7 Kintex to use the compiler to Vivado.

• [FPGA] xilinx ise?

  Hello

  I am trying to configure a component LabVIEW and xilinx coregen won't let me because «is not installed with labview fpga xilinx ise» I can't find a proper download of NOR. Is this a question expected? There is of course the xilinx website, but do I need a specific version and how can I say? The target FPGA's Virtex-6 LX195T if that's a factor. LabVIEW 2013.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/210629

  Hey, ToeCutter,.

  You have the 2013 LabVIEW FPGA Module Xilinx tools installed locally? Who has Xilinx coregen, which is what you will need to configure their intellectual property. If you are some intellectual from the LabVIEW FPGA palette, it should "work".

• LabVIEW fpga xilinx ise vs

  Hi all

  I'm new to fpga and my question is fairly simple which is best?

  LabVIEW fpga and xilinx ise platform?

  or does rely on demand?

  I'm not familiar with these protocols, so I can't answer the question precisely.

  NOR has several FPGA products with high-capacity chips.  I guess that they could manage the protocols, but I can't make any promises.

  Unless you're already an expert ise, I don't think you're going to end up with a more effective than LabVIEW code.  I guess that's a possible higher capacity chips are available for ise as LabVIEW, but I don't know.

  One thing I like LabVIEW is that you can write the code and compile it for the target without having to purchase the equipment first.  You could program the algorithm, and then understand what size FPGA, you put on.

  Bruce

• Error 0 x 80070643 installation on Windows Server 2008 R2 when installing PowerShell ISE?

  I am running a new installation of WinSvr 2k8r2 order on my server at home. and when I try to install Powershell ISE, I get error 0 x 80070643 installation.  I read the entries posted here but all are specific to MSSE and related to Win7, Vista, or Windows XP. What should I do to fix this error.
  Thank you

  Hi Dan,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows PowerShell Forum

• I agree with tamusik and he can't listen to I get message 'CRL update required 0xc00d28b7' but can't find it on the site of yor

  I agree with tamusik and he can't listen to I get message 'CRL update required 0xc00d28b7' but can't find it on your site. I have updated to the service pack, do everyting he has tls me nothing does not. Help, please. I pay for this service to music and cannot use use until I solve this problem
  'sincerely '.
  Alex

  Hello

  The license that is associated with an existing item of content requires a version more recent list (CRL) revocation certificate which is not present on the system. Your application can download most recent CRL using IWMDRMSecurity::PerformSecurityUpdate.
  http://msdn.Microsoft.com/en-us/library/Windows/desktop/dd798363 (v = vs. 85) .aspx

• Windows PowerShell ISE is required on Windows Vista Home Edition?

  Windows PowerShell ISE is required on Windows Vista Home Edition?

  Original title: Windows PowerShell ISE

  Hi MEL41,

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. If I understand correctly, you need to learn more about Windows Powershell ISE, is it necessary for Windows Vista Home edition.

  1. do you have problems regarding Windows Powershell ISE?

  2. do you receive any error messages?

  Windows PowerShell 1.0 is a new shell for command line based on tasks and a scripting language that is designed specifically for system administration. Based on Microsoft .NET Framework, Windows PowerShell IT helps professionals and expert users control and automate the administration of Windows operating system and the applications that run on Windows.
   
   
  Using Windows PowerShell, administrators can manage their systems by typing individual commands or running scripts that automate management tasks. Microsoft Exchange Server 2007, Microsoft System Center Operations Manager 2007, System Center Data Protection Manager V2, and System Center Virtual Machine Manager use Windows PowerShell to improve efficiency and productivity.

  Windows Powershell is intended for administrative purposes, if you use it, you can uninstall the update. I suggest you to read this article for more information.

  Reference:

   

  
  Windows PowerShell 1.0 for Windows Vista installation package
  http://support.Microsoft.com/kb/928439

   

   

  Hope this information helps. Please reply back with the State so that we can help you.

• PowerShell does not open, Powershell ISE throws the exception when starting

  I am running Windows 7 SP1.

  When I try to start Powershell (x 64) or Powershell window will appear for less than a second, and then disappear.

  When I try to start Powershell ISE (x 64) I get an error on the application of "the exception unknown software exception (0xe0434352) occurred in the application at location 0x7568c44d."

  When I try to start Powershell ISE I get an error on the application of "the exception unknown software exception (0xe0434352) occurred in the application at location 0xfd96adad."

  I tried to repair .net 4.5 and I tried to reinstall Windows6. 1 KB2506143-x 64.msu.

  When you try to install KB2506143-x 64.msu I get "the update is not applicable to your computer."

  When trying to make sure that the old powershell is uninstalled I can't find KB2506143 in the list of installed updates.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Reset password ISE CLI

  Hi Security Experts,

  Is it possible to reset/recover password ISE CLI of ISE WebGUI? I am able to enter web gui of ISE, but not able to connect to the CLI. So want to reset/recover password ISE CLI from the GUI.

  PS: I rate of useful messages.

  Thank you

  Boudou

  Hello

  You can only recover the cli password after you restart the node of ise of the installation DVD. There is no other method.

  Reference - http://www.cisco.com/en/US/docs/security/ise/1.1.1/installation_guide/is...

  Sent by Cisco Support technique iPad App

• ISE 2.0 Server backup problem

  Hi guys

  I'm trying to implement backup-TFTP to an ISE 2.0, but the TFTP entry does not appear in the repository list, once I configured it.

  Does anyone else have this problem?

  I also had problems with FTP backups. The repository is configured and healthy air. The backup starts, runs for 5 minutes while getting progressively to 80% and fails. Newspapers reported simply that there so I don't know why he did it.

  Any suggestions?

  Cisco Identity Services engine

  ---------------------------------------------

  Version: 2.0.1.130

  Build Date: Kills Mar 3 02:38:48 2016

  Installation date: Wednesday 25 May 22:44:10 2016

  Thank you

  m

  You want to confirm that the user that is configured for the repository has rights to write to the FTP server.

  Javier Henderson

  Cisco Systems