ISE for mobile

Hello everyone...

I have camera ISE integrated with Active Directory to authenticate users, and I integrated with the ISE also WLC.

integration successfully and now no matter what user access to the network via WIFI (Dot1x), it must use its AD credintials and if he he get full access, if not consistent it go the quarantine vlan.

My problem is the mobile, there are a few users need access to the WIFI using mobile workers using credintials AD and I need to circumvent the posturing for mobile only.

in other words, I just need to check if the device is compliant or non-compliant mobile only, while I need this feature for laptops.

Note: I have 1 one SSID

suggestions for this case...

Lydie

Hi Adrien, endpoint policy was added in ISE 1.1 MR1, I think you need to upgrade to see this.  I highly recommend upgrading to the latest version of ISE, in any case, because it is much improved over the version 1.1.0.

Thank you

Andy

Tags: Cisco Security

Similar Questions

  • Another portal for mobile

    Hello everyone.
    I use the patch 1.4 ISE 3, flexconnect and CWA for my guests. I am also show posture for guests with agent web (they should have an AV).
    He works for computers and androids, but not for Apple devices (iPhone, iPad,...).
    Trying to do work for Apple devices, I created a new redirection rule for mobile phones (Android and iDevices) that redirect these devices to another portal (without control of posture), but it does not work, because when the user attempts to access the first, before he opens the captive portal and inserts his letters of credence ISE doesn't know that the device is an iPhone. Then this device still hit the default redirect rule that sends the user to my default CWA, which has a posture check.

    If the user tries to connect once more, it works, because now ISE knows that it is a mobile device.

    I would like to know how to identify the device on the first time that it is connected, and then send it to the correct web portal.
    Is this possible? How could I do?

    Kind regards.

    If you run ISE 1.3 or later (recommended current version 1.4 with the latest patch is) then the default state of posture is consistent, this means that if you have not a client provisioning rule for iOS devices (which you shouldn't because there is no support for these types of devices). Ignoring any loading webagent

    It would be the recommended flow, it might even be a document in the support forums already explaining this

    http://www.Cisco.com/c/en/us/support/docs/security/identity-services-Eng...

  • Are there plans to add "XMARKS" for mobile Firefox? I want to migrate from Dolphin. I have the premium version of the "LASTPAST / XMARKS ' installed on

    Are there plans to add "XMARKS" for mobile Firefox?
    I want to migrate from Dolphin.
    I have the premium version of the "LASTPAST / XMARKS ' installed on 4 platforms.

    I noticed that a user has requested to have problems to install XMARKS. I couldn't find this add on. I have it on my computers Windows Firefox. I also have it on my mobile devices.
    Thank you.
    Dick Proulx

    Hello luckyduck, as is the case with xmarks too, the overwhelming majority of the addons is not created by mozilla, but by independent third-party developers. so if you want to know if it is planned an extension for firefox on android porting or have other requests for features, please communicate with the developers involved directly in order to get a better answer. Thank you for your understanding!

  • Mozilla for Mobile will work on an iPad 2 WiFi and an iPod touch (4th generation)?

    I do not have a smart phone. Firefox for Mobile work with the iPad 2 Wi - Fi and/or an iPod Touch (of fourth generation)? My computer is a PC with Windows XP Professional, and I have a router for connecting wireless to my iPad 2. I am waiting to buy the iPod Touch with iOS new 6 ("coming soon," according to Apple). Thank you.

    Firefox does not work on any iOS device (iPAD, iPhone, iPod, etc.). Apple will not allow a competing web engine on their devices.

  • Firefox insists on sign up for mobile & I have not mobile! I just want to play words with friends and it won't let me.

    I played the words with friends last night - no problem. This morning I get messages on my phone that Firefox will not support my browser and I need to upgrade - it always tells me to sign up for mobile Firefox for my Android - I don't HAVE AN ANDROID. MY CELL PHONE IS A FLIP OF THE DARK AGES, PHONE, AND I DON'T WANT TO PLAY GAMES ON IT.

    You are probably just seeing a message offering it for download, if you do not have an Android phone, you can safely ignore it. Do not update your Firefox on your computer but, you are using an older version. Update Firefox to the latest version

  • Is it possible to prevent Firefox for Mobile sync my laptop home page

    I have Firefox 4 in my partition Ubuntu my laptop and Firefox 5 on side Windows Vista from this partition.

    I don't have intalled Firefox for Mobile on my phone yet, but I like the idea. However the home page I have Ubuntu as actually a collection of three pages, and I don't really want to not use on any other device. I really want to visit one of these three pages on my phone.

    Which option would prevent me sync my homepage?
    Where can I find this option?
    What is the best device to access since?

    There are services.sync.prefs.sync associated with which to synchronize prefs prefs and you can set the pref services.sync corresponding to false to prevent the synchronization of this preference.

    You can set the services.sync.prefs.sync.browser.startup.homepage pref to false on the subject: config page.

    See:

    To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.

    If you see a warning then you can confirm that you want to access this page.

    • Use the filter at the top bar of the on: page config to more easily spot a preference.
    • Preferences that have changed see the bold (user set).
    • Preferences you can restore the default value or change via the context menu.
  • Android market Firefox for Mobile is not found, but my phone supports Android 2.2, a T-Mobile Comet or huawei mfr: Please help?

    I tried to download, but cannot find it on the Android Market?

    You cannot run Firefox for mobile on the Comet of Mobile T. Firefox for mobile requires a processor that supports the ARMv7 architecture, but the T-Mobile Comet has an ARM 11 processor that uses ARMv6 architecture.

  • Slot Netbook Sim Toshiba NB200-12N for mobile internet

    Hi all

    I bought a Toshiba Netbook NB200-12N, and when I looked at the manual, it said that it had a Sim slot under the battery for the mobile internet.

    However, when inserted the Sim Card into the slot and switched the netbook on nothing happened. There are no options to choose for mobile broadband services activation or even no recognition that I inserted a Sim Card in the slot.

    I looked in all control panel system resources and for all the options for mobile internet using the Sim Card in the slot, but without a bit of luck.

    I am very disappointed that Toshiba has only go as far as showing you how inert to the Sim and remove it without tell you how to get it started and use it with success.

    Could someone please help.

    According to the specifications of the laptop your model has no 3G module and no slot for SIM card inside.
    Is clearly written in the manuals > some models.

    Sorry buddy.

  • Tecra A7: Not possible to update driver display for Mobile catalyst 6.9

    I tried to update my display drivers for Mobile catalyst 6.9, but during the installation, I get this error annoing: "failure of the installation run installation: an error occurred during a seek operation.

    I tried to uninstall the old drivers and then installing the new, but I get the same error and I don't know the cause. A few days ago that everything works perfectly, so I guess it's a software I as causesc this problem.

    Help, please!

    Hello Vlad

    It is well known that on most new units is not possible to install the graphics drivers designed by graphics card manufacturers. He is always shown in Setup error as in your case. It's the material.

    Graphic driver Toshiba designed is a kind of sanitized version. Sorry, but I'm afraid there is nothing to do. You claim your previous assignment of fan performance. If this driver can be installed, I fear that this graphics card may be forced to run faster and produce more heat.

  • How to use the Satellite M500-ST5401 for mobile calls using Bluetooth

    Team,

    I would like to know more information about the bluetooth connectivity of a laptop for mobile phones bluetooth-enabled. My model is Toshiba Satellite M500-ST5401.

    What I'd like to meet, I have a Sony Ericsson mobile phone and it has bluetooth with A2DP function.

    Normally, if we have a headset stereo bluetooth
    Mobile can be coupled and listen to music using the bluetooth headset for music that plays on the mobile phone.

    The same that I feel every time I get a call on my phone, I would like to transfer the call to my laptop where I would use portable speaker to listen to the voice of the caller and the computer laptop microphone to answer the call of mobile, and then it will be supported by mobile phones.

    Please let me know if this is possible, I just want to hold the phone away from my hand and wanted to manage calls incoming and outgoing, sitting just in front of the computer using technology built into cell phones and mobile devices.

    Please recommend me what are all the driver software and the hardware must be installed to achieve this.

    Your response is much appreciated thanks in advance.

    You have already started a thread on this topic:
    http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=181953
    Don t create different threads on a single theme to avoid misunderstandings!

  • Costume measurement OR for Mobile/Fixed WiMAX 1.0, is there any optiion to activate PUSC or AMC for the generated signal?

    Hello.

    I use a VST OR to generate the WiMAX signal. I installed NO measure costume for Mobile/Fixed WiMAX 1.0 on the calculation. But I can't find any option on the front panel of the combination of the generation to enable AMC or PUSC for generated signal. This feature exist at all?

    Thank you.

    Hello sam2013ni,

    That's all I see for AMC and PUSC. Look in "box Type".

    Best regards

  • What is the id #. can someone tell me what that the product # is for mobile id intel r 915gm/gms.910gml express chip family

    can someone tell me what that the product # is for mobile id intel r 915gm/gms.910gml express chip family

    Hello

    I suggest you contact the Intel to get help.

    http://www.Intel.com/p/en_US/support?IID=HDR+support

    http://www.Intel.com/p/en_US/support/highlights/graphics/intel915gm/

    It will be useful.

  • HP Pavilion DV4-2140us. Looking for Windows XP (32-bit) driver for Mobility Radeon HD 4000 series.

    I have a laptop HP Pavilion DV4-2140US AMD Turion II M520.  I'm looking for a Windows XP (32-bit) driver for Mobility Radeon HD 4000 series video card. I've upgraded HDD to a 1 TB hard drive and the partition for Windows XP (32 bit) power to a dual-boot between Windows 7 (64 bit) and Windows XP (32 bit).

    Hello:

    Please see if it works.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-85978-1&prodTypeId=12454&prodSeriesId=472276

    Paul

  • How to: Download driver for mobile samsung SGH-A847 phone

    How can I download driver for mobile samsung SGH-A847 phone

    Hello

    You must get the driver from the Samsung website. Use the following link.

    Support - SGH-A847 | Samsung cell phones:
    http://www.Samsung.com/us/support/owners/product/SGH-A847ZAAATT

    Concerning

  • How to send notifications in Blacknberry html5 apps for mobile OS 7.0 Bb etc.

    How to send notifications in Blacknberry html5 apps for mobile OS 7.0 Bb etc.

    Please guide me with

    Client SDk

    SDK server-side

    IE code etc. with API

    I have app html5 appeared in the app world.

    Here's the documentation on using to push in a WebWorks for BlackBerry 7.0 application:

    https://developer.BlackBerry.com/BBOS/HTML5/APIs/BlackBerry.push.html

    For the side server, here is the SDK of Service Push documentation:

    https://developer.BlackBerry.com/DevZone/develop/platform_services/push_service_sdk.html

    However, I advise to use a service like the urban airship for your management side push server.  They have asked all the pieces of the puzzle, and you can create a new account and send messages push through this service.

Maybe you are looking for