ISE maximum recording time / data retention

Similar Questions

• Forcing Diadem to record time data explicit

  
  

  Hello Thomas,.

  Yes, there is a way to do it, but he needs to set a variable with a short VBS.
  If a channel is loaded or created implicitly expanded aftrewards DIAnem remember that the channel is implicit and tries to save her in this way.
  To recall the type of channel, DIAdem uses the ChnDataType() variable.
  Use chndatatype (1) = "Explicit" in the first string of the value explicitly (you need to expand the channel first)

  If you save the data later, channel 1 will not be converted to implicit again.

  Hope that answers QNotre question
  concerning

• set the default recording time in windows sound recorder

  Looking for a way to increase the default value to the recording of the sounds found in XP home recorder.  There is no documentation that I can find to the configuration

  Hello

  In the default recorder recording time is 60 seconds. There is a solution to increase the maximum recording time. Follow the steps mentioned below:

  Step 1:
  a. utility start Sound recorder.
  b. click on save and then Sound Recorder run for 60 seconds.
  c. once the sound recorder to stop recording, click Save as on the file menu, and name the file Blank.wav.
  d. in order to increase the maximum duration of recording in sound recorder, click Insert a file in the Edit menu, and then insert the Blank.wav file saved in step 3. When you do this,
  the maximum recording time is increased by 60 seconds. You can repeat this step once for each additional minute recording that you want to add. For example, for 5 minutes
  recording time, insert the Blank.wav file five times.

  Step 2:
  To make the tape recorder automatically use the extended length of the recording time:
  a. Click Start and then click Open.
  b. double-click the programs folder.
  c. double-click the Accessories folder.
  d. double-click the multimedia file or entertainment.
  e. right - click sound recorder and then click Properties.
  f. click on the shortcut tab.
  g. in the target box, press END, press the SPACEBAR and type the location of the file Blank.wav.

  For example, if the target is 'C:\Windows\sndrec32.exe', and the location of the Blank.wav file isC:\Blank.wav, the new line in the target box is "C:\Windows\sndrec32.exe C:\Blank.wav"

  The next time that you start the tape recorder, the Blank.wav file opens automatically. After you save your new .wav file, you can click on remove after the current Position in the Edit menu for
  Remove the extra space in the file.

  NOTE: when you have finished recording and editing of your new .wav file, save the file with a new file name.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• Maximum run times for 2536 PXI

  The maximum manual user work time (page 3) is listed as Mrs. 16 it's a typo right? It should be right 16us?

  Hi AbandoningCausality,

  It seems that it is very likely typo. For reference, the 2536 uses the same material as the 2535 - it's just a different topology. Thus, the maximum work time must be the same 16us reported for the 2535.

  I went ahead and filed a request for Corrective Action in order to update the data sheet. This request may be followed by the number 589816. Thank you for bringing that to my attention!

• The maximum graph time

  I need to draw a picture that shows the behavior of the frequency of the peak spectral of the signal over time. I thought that this VI will work fine:

  

  The interesting thing is that before you plug the output of statistical Maximum of the block time to the time of Max graphic time, displaying the parameters correctly:

  

  Here's the diagram corresponding to the façade above:

  

  But as soon as I connect the Max permeate more graphic time to the output of statistical Maximum block time and run the VI, the time (x axis) of the chart changes frequency x axis:

  

  Once again, I want to the chart to view the changes in the value of maximum frequency over time. Any suggestions? I have attached the VI below. Thank you!!

  Hello wprice

  I have converted the duplicate dynamic data and was able to see the values to show based on time.  Can you let me know if this is the direction in which you want to move forward?

  Thank you very much!

• How to operate the laboratory discovered multi-function synchronization with multiple devices and change the recording time?

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (1 unit). I try to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. In this library, "des_v2_Multi-Funtion_Synch I - AO.vi" is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much!

  Sincerely,

  Jie

  Hello Jshen6,

  You can have different examples of VI if you do not use the same version of LabVIEW. I am currently operating on LabVIEW 2013 SP1. Whatever it is, this article should be useful to you that he describes in detail how to synchronize multiple tasks of series M.

• How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

  How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

  Menu, file == > export - check boxes to include metadata and location- export to iPhoto

  LN

• What is the Mozilla user data retention policy unique identifier?

  I read recently in the privacy policy of FF that an ID unique browser is sent to Mozilla with an IP address whenever the browser checks the updates:

  "This function sends also potentially personal information to Mozilla in the form of your IP address and a cookie that contains a unique numeric value to distinguish various Firefox installs."

  http://www.Mozilla.org/en-us/legal/privacy/Firefox.html

  This feature can potentially, provide a list complete IP addresses and sites that a user used to access the Internet, Mozilla. Can you please clarify your data retention policy? In other words, how long are the IP address or other identifier stored on your servers?

  Hello! I'm chime of the Mozilla Privacy team.

  For RFT pings, we don't hold anything in FHR > 6 months (180 days). That answer your question? Here is a link to the info - it's under "how enable or disable sharing of data".

  https://support.Mozilla.org/en-us/KB/Firefox-health-report-understand-your-browser-perf

• Since the last system upgraded my menu bar top with wifi and time, date etc etc is hidden unless I have sulk my cursor on it. Same thing with apps from shingles. How can I restore it is always there?

  Since the last system upgraded my menu bar top with wifi and time, date etc etc is hidden unless I have sulk my cursor on it. Same thing with apps from shingles. How can I restore it is always there? bar menus hidden-how do I restore?

  SystemPreferences-> Dock: automatically hide / show Dock

  SystemPreferences-> general: automatically hide / show menu bar

• Satellite L500-1KK - how to the maximum battery time?

  Hello

  1. it is indicated on the product specifications L500-1kk expected autonomy is about 03:20 Hrs use mobile brand! However, I was using my laptop for almost a year now, the maximum battery time I get is 02:15 Hrs, whenever I load my mobile suit, the battery still bar program shows me this maximum time remaining! I use the default power settings!

  2. most intriguing, is that my sister used another laptop, its battery is approximately the same capacity that mine, around 43200 mWh, us both using Windows 7 Ultimate (she 32bits, I, 64-bit version), but its battery time is at least 4.5 Hrs. Why is this, and how I would maximize my battery time!

  3. Finally, her laptop is new (4 months, yet battery pro program shows that the battery wear rate is 7%, my laptop is almost a year and it shows a wear rate of 1.3%, I use mostly my laptop while the power is plugged in, unplugged rarely!) Is their an explanation to the different rates of wear?

  Thank you

  Hello

  To be honest, I think a battery about 02:15 hours is good and I think that everything is ok with your laptop. My new Satellite A500 I also only 2.5 hours if I running on battery, sometimes less than 2 hours or less. That s always according to the applications you run.

  > 2. More intriguing, is that my sister used another laptop, its battery is approximately the same capacity as mine, around 43200 mWh, we're both using Windows 7 Ultimate (she 32bits, I, 64-bit version), but its battery time is at least 4.5 Hrs. Why is this, and how I would maximize my battery time!
  Well, it s the same you compare two cars with the same ch from different manufactures a car's fuel consumption higher than the other car, even it have the same hp. Why? Well, the different manufacturers using different parts: other tires, gears, weight, dray of air, etc.

  You can compare two identical notebooks or cars from the manufacturing even to find a problem, but * not * from different manufacturers. ;)

  Last but not least, this could be an interesting document:
  http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm

• Time Date & keep refreshing in the BIOS

  Sorry

  I am new to Toshs so I don't know that it is a very simple problem. Keep redefine the time & date.

  It will hold in the BIOS for about a week and then must be updated again. I am upgrading the hard drive anyway, but don't want to start this without get in the way of this Issus.

  Battery problem?

  If the sounds

  I think that the RTC (BIOS) battery is not fully charged.
  In the manual, you will find information about the BIOS battery and how long it of necessary to load.

  I think you should leave the laptop running for approximately 12-16 hours on the AC adapter / CC.
  Then the RTC battery must be fully charged

  Good bye

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• How to read data from a worksheet to a chart in the form of wave at intervals to simulate real-time data

  Hi I have measured data using a SELF-DIAGNOSIS device and that you have downloaded the log files as a .csv I have attatched below.  I'm trying to read the 7th column of data (RPM) and display it on a waveform graph, read line-by-line to simulate driving real-time data. The interval between readings, I'm trying to achieve is 500 Ms because it is the time interval of readings on the worksheet. I'm finishing the two loops when rpm is equal to zero, as happens when the car is off. I have attatched the relevant section of my program below. Any suggestions would be greatly appreciated.

  Thank you

  Michael

  There are two errors in your block diagram.  First of all, as you read the entire table 2D in all at once (which is fine), you make a clumsy (pardon my language) job to make a line of programming.  Once you take the first line of headers, you have the ideal substrate for a loop, which is made of elements of an array (lines) process, one at a time, using its tunnel of indexation.

  The second mistake is to forget data flow.  The loop, I mentioned, or the While loop you use, produced one at a time and points it at 2 Hz thanks to your expectation of 500msec.  You want to give each point to your chart, but the picture is out of the loop, which means that there is No point until the loop ends.

  Here's an easy Question - where you put the indicators in table of waveform?  [Council - I said that "outside the loop is bad"].

  Bob Schor

• Detect if the time/date browse button has been used

  Hello

  I have a checkpoint vi for the indexing of the elements inside the table and shows the date and the corresponding time. I have the large number of control inside my block signals, but I removed all the blocks out of words and signal for this discussion. I replaced all the unnecessary controls with constant values, so don't waste time analyzing.

  If you take a look at my vi, you'll see Star/Stop control, control of Position and an indicator of time stamp (time waveform) with a browse button date/time of another control of time stamp. I have all the features you want, but I have the problem when you use the button browse to bring up the time. I can't put my time twice in a row to the same value as I compare value "Last entry of time" with a current comes to enter. I wouldn't completely change my blocks because I use a lot of variables and property inside my project nodes. I'm looking for a way to figure out if the time/date browse button was pressed so I could jump to the desired in my registered wave point.

  I'll skip the actual implementation of what you're doing because it's not all that clear to me and answer the question about to detect if the button has been pressed. This general question came several times before in this forum. There is no built-in mechanism to detect that the Browse in a timestamp control button was pressed. When you click this button, it actually opens a VI with the title 'Set Time and Date'. For example, you can monitor to see if this window opens.