The maximum graph time

Similar Questions

• Satellite L500-1KK - how to the maximum battery time?

  Hello

  1. it is indicated on the product specifications L500-1kk expected autonomy is about 03:20 Hrs use mobile brand! However, I was using my laptop for almost a year now, the maximum battery time I get is 02:15 Hrs, whenever I load my mobile suit, the battery still bar program shows me this maximum time remaining! I use the default power settings!

  2. most intriguing, is that my sister used another laptop, its battery is approximately the same capacity that mine, around 43200 mWh, us both using Windows 7 Ultimate (she 32bits, I, 64-bit version), but its battery time is at least 4.5 Hrs. Why is this, and how I would maximize my battery time!

  3. Finally, her laptop is new (4 months, yet battery pro program shows that the battery wear rate is 7%, my laptop is almost a year and it shows a wear rate of 1.3%, I use mostly my laptop while the power is plugged in, unplugged rarely!) Is their an explanation to the different rates of wear?

  Thank you

  Hello

  To be honest, I think a battery about 02:15 hours is good and I think that everything is ok with your laptop. My new Satellite A500 I also only 2.5 hours if I running on battery, sometimes less than 2 hours or less. That s always according to the applications you run.

  > 2. More intriguing, is that my sister used another laptop, its battery is approximately the same capacity as mine, around 43200 mWh, we're both using Windows 7 Ultimate (she 32bits, I, 64-bit version), but its battery time is at least 4.5 Hrs. Why is this, and how I would maximize my battery time!
  Well, it s the same you compare two cars with the same ch from different manufactures a car's fuel consumption higher than the other car, even it have the same hp. Why? Well, the different manufacturers using different parts: other tires, gears, weight, dray of air, etc.

  You can compare two identical notebooks or cars from the manufacturing even to find a problem, but * not * from different manufacturers. ;)

  Last but not least, this could be an interesting document:
  http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm

• Maximum run times for 2536 PXI

  The maximum manual user work time (page 3) is listed as Mrs. 16 it's a typo right? It should be right 16us?

  Hi AbandoningCausality,

  It seems that it is very likely typo. For reference, the 2536 uses the same material as the 2535 - it's just a different topology. Thus, the maximum work time must be the same 16us reported for the 2535.

  I went ahead and filed a request for Corrective Action in order to update the data sheet. This request may be followed by the number 589816. Thank you for bringing that to my attention!

• set the default recording time in windows sound recorder

  Looking for a way to increase the default value to the recording of the sounds found in XP home recorder.  There is no documentation that I can find to the configuration

  Hello

  In the default recorder recording time is 60 seconds. There is a solution to increase the maximum recording time. Follow the steps mentioned below:

  Step 1:
  a. utility start Sound recorder.
  b. click on save and then Sound Recorder run for 60 seconds.
  c. once the sound recorder to stop recording, click Save as on the file menu, and name the file Blank.wav.
  d. in order to increase the maximum duration of recording in sound recorder, click Insert a file in the Edit menu, and then insert the Blank.wav file saved in step 3. When you do this,
  the maximum recording time is increased by 60 seconds. You can repeat this step once for each additional minute recording that you want to add. For example, for 5 minutes
  recording time, insert the Blank.wav file five times.

  Step 2:
  To make the tape recorder automatically use the extended length of the recording time:
  a. Click Start and then click Open.
  b. double-click the programs folder.
  c. double-click the Accessories folder.
  d. double-click the multimedia file or entertainment.
  e. right - click sound recorder and then click Properties.
  f. click on the shortcut tab.
  g. in the target box, press END, press the SPACEBAR and type the location of the file Blank.wav.

  For example, if the target is 'C:\Windows\sndrec32.exe', and the location of the Blank.wav file isC:\Blank.wav, the new line in the target box is "C:\Windows\sndrec32.exe C:\Blank.wav"

  The next time that you start the tape recorder, the Blank.wav file opens automatically. After you save your new .wav file, you can click on remove after the current Position in the Edit menu for
  Remove the extra space in the file.

  NOTE: when you have finished recording and editing of your new .wav file, save the file with a new file name.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• ASA5510 - Maximum connection time

  Small question.  I have configured the "maximum connection time" unlimited in my strategy group, but when a connection is established, it shows a "Conn Time Out: 120 minutes.

  The connection with this clock.  No idea how truly unlimited and why it sets to 120?

  I have a problem with SSL client phone drop all day and think that this may be the cause.

  Thank you

  Great news. The 'old' trick of restarting solves the problem.

  Please want to mark your message as answered and rate useful posts so that others can learn from your experience too. Thank you.

• The maximum time does not change if use .vi spectrum FFT (Mag-Phase)

  Hi all

  I test just a simple program to detect the time of peak of a FFT graph. the problem is when I use .vi spectrum FFT (Mag Phase), I can't get the value of the maximum duration. But if I used the spectrum measurement vi express, it can give me the value. How can I get the value using FFT (Mag Phase) .vi spectrum?

  It is not clear what you're asking. You say that you try "detect the time of peak of a FFT graph" which is nonsence unless you would apply condensers or some other processing of this type. FFT gives you orders of magnitude of the frequency vs. No time. So it seems to me that you are trying to get the frequency of harmonics with the magnitude of maximum, right? If so see little piece attached.

  

• full waveform graph to calculate the area under the curve over time

  Hello

  If please find my attached VI and help me please for integration to get area undercut for my chart of waveform.

  I would like to find my wave power wind energy production chart oever within one month of time.

  I think I have to integrate to get the area under the curve and so I m now using tool integrated into labview attached.

  As I did not wait years for my result and so I want to make sure that the tool that I m using is correct.

  Please advise me what method I will use for my chart.

  Dominique says:

  I would like to integrate my table of power over time (table of power is on each interval of a minute) and the entire graph is one month. So, I'll put dt = 1?

  You put dt at some units you want in the final result. If you want Wh, you want dt in hours. If the spacing is currently a minute, you can express in fractional hours and use the result as dt. Try dt = 1/60.

• How to synchronize the start time in the waveform graph

  Hi all

  I just find a solution in the forum to select the data you want in a grap of waveform with cursors, however, I don't know how to synchronize the time of beginning of waveform for the second graph. How can I extract start time of the waveform with the index data?

  

  Something like that?  It is a bit gross, but is what I think you're asking, should be able to use it as a starting point.

  

  The Max - Min is to make sure that the cursor is always valid.

• Impossible to reload acrobat adobe XI - has reached the maximum number of times

  Impossible to charge adobe acrobat XI - I reached the maximum number of times. Any idea who I can contact to help with this. I feel I'm getting of the race.

  You can install Acrobat as many times as you want, but there is a limit on the number of activations.  If this is your problem, you should contact customer service to reset your number of activations.

• "Filtering exceeds the maximum time" error in the crawl log

  A track log contained the following error. Is this error related to the Configuration of robot setting "Crawler Timeout (seconds) threshold? (Mine is set * 30 * seconds.)
  
  "Filtering exceeds the maximum time * 108 * seconds; killed process. dating status 1 without any error message.

  No, they are not related. Filtering is the process of conversion to the format (Word, PDF) documents into searchable text. If it exceeded the 108 seconds the process had almost certainly hanged, most likely indicating a corrupt file.

• Determine the maximum use of the processor for a virtual computer in the custom user interface

  I want to determine the maximum use of the processor for a virtual computer in the custom user interface.  How can I do this?

  If I use a supermetric, there is no kind of attribute under CPU called "maximum use.

  Certainly, you get points for a long question! Although to be fair, it's probably my fault to feed you so much information to digest at once.

  1. I would say you can do two ways visually. Use the operations > detail view for 'normal ranges' use the upper limit of the normal range as your typical max. You want an absolute peak, add the metric of a graph or observe that highlight high and low watermarks.

  2. There are a lot of ways to display data, but if you want to display a single metric over a period of time, we could use the following widgets [on top of my head]:

  Top - N analysis

  Weather map

  Analysis of distribution of data

  Among these, I think of your desire for a "peak". Who you want real value, which eliminates the weather map. Then, I think that the concept of a 'Summit' and what is the best thing, I think that the 95th percentile... then I came with the widget of data distribution. The decision is ultimately yours given your particular use case.

  3. you can have it apply to several virtual machines - it's just a widget capable of being an independent provider or receiving widget (metrics, DO NOT choose to select resources). Each resource/metric will add to the widget and you can remove them if you like after it is added. You can certainly all the time you visit... It is date and time standard options you have in all the other widgets chart. With the widget data distribution, you want as much time as possible to get an accurate histogram of the cycles of workload.

  4. This is similar to the question above. You can certainly add parameters of individual resource or a DM that summarizes or AVG groups of resources. And as above, the delay is configurable, along with the other graph widgets.

  5. it's part of Q4 - you can sumN or avgN up to any number of resources with a SM, then discovers that SM in the widget of data distribution. When I said container, I mean an application, group resource pool... all that acts as a container parent within the vCOps.

  6. that's correct, SMs calc using data collected last points... aka single period of time. When you are referring to the longest period, I gave you a few examples of the attributes that are composed of several periods of time which are calculated and created by the adapter for VMware vCenter behvaior. In this case, you have the GVA 15 min CPU 1.5; These specific simple mobile GVA can be specific OR a copy using SMs. Next, you will have the chance is to find a way to distribute what you need through a widget [at that time].

  7. the distribution of data is not for export, it is for Visual functions. If you want the data in CSV, just use a typical chart of metrics and export to a csv and calc your own pics, avg, 95th, whatever.

  8. This is a bit of a mix of all your questions, put in place.

  You are right, if you added those 3 VMs, then calc was the 95th of the AVG. Like Q7, you would not export the data of the distribution of data because the raw data points are not - you do not pass the metric to a metric graphics standard and export via csv.

  Take advantage of...

• is no longer able to see the 8 tiles frequently open - show only 4 now - must use the command/scroll down to min size of the mosaic each time

  With the new version of firefox - not able to see tile 8 discovers each tab opening now - only 4 show now - have to use mouse scrolling and the control key to minimize the size of mosaic to see several cages - used to 8 plates and 8 slabs shown whenever a new tab was opened. Basically, I wan to be able to set the screen for 8 tiles not only 4 each time I open a new tab.

  Hi, as you know, you can change the number of tiles on the Page of the new tab to zoom in or out (Ctrl and + key, or Ctrl and - key).

  If you want to keep the same zoom setting when a new tab is clicked: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.newtab.preload and double-click on it to change the 'value' of true to False.

  It is also possible about: config to change the maximum number of tiles by scrolling to the browser.newtabpage.columns (or Rows), then right-click > modify to set a new number of 'value '.

  As an alternative, you might like to try the add-on new tab tools.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• 'webplugin' does not support the maximum safety level of safari plugins

  Last night, I got connected to my Svat security system using Safari and left the computer with the browser showing all the security cameras. Early in the morning about 3 or 04:00 I was awake by restarting the computer I noticed that the OS has been updated.

  For now, I am trying to connect to my security system and Safari can not access the server. I went into properties and noticed the ['webplugin' does not support the maximum safety level of safari plug-ins] my security system stop working in windows because of the plugins for a long time so my only option is to use my mac-mini to access the system and now what happens.

  The name of the plugin in the security system is called HiDVRPlugin.dmg and the system is Svat. I tried to go to Safari preferences and enabling the plugin, but it still does not work.

  Any ideas on how to re activate or difficulty this plugin?

  Thank you

  Go back to an earlier version of Mac OS X is not an option? Or may be using a different browser?

• Hi, my places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this. Visited links are is more changing color.

  Hello
  My places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this.
  Suddenly the visited links don't change is no longer the font color, that I prepare for an exam, I need visited issues to change color, to follow up on issues that I ended. But if I delete a few days of history, then again once, most visited links change color and then it stops, it seems that something is getting full and not able to accommodate more? Why my visited links don't change color after a number of visits? I would like to make a back up of the file places.sqlite. So I tried everything to remove the profile, uninstalling reinstalling, creating a new profile, and then copy paste places.sqlite etc, but as mentioned after a few visits, visited links is no longer change color, if I delete a few days in history and then a few visits is again change color and then stop again, so what should I increase so that my quota of visited links is increased , I also tried tweaking about: config and there has been no result. Although I was not really convinced that _pages growing brower.history_max (don't remember the name, but I'm sure you get the idea) will help.
  Seems that while my visited links change color, quota is met and only if I delete the history of a few days will I get some links most visited to change color. Can someone enlighten us? As mentioned that my places.sqlite file size is 30 720 KB so I think maybe this has something to do with it? Would be very grateful if someone could help me. Thank you.

  Sorry it is not looking good.

  1. Unlike bookmarks history is not saved in Firefox.
  2. There is a possibility using Windows.
  3. Sync is not expected to back up things until the synchronization server
  4. If places.sqlite does not sort itself you may have to re-create remove it. You will lose your history, but can still access indirectly IF you have saved a copy of the appropriate
  5. Different databases to try to create new profiles
  1. History
     is rather less robust than bookmarks, you should deliberately somehow return it upward, but it's too late now
  2. Earlier versions of Windows
     This is really the last chance. Make sure you have some places.sqlite you saved. Always before and after any attempt to restore the backup. Windows must be able to provide a previous version. One of these versions may be usable as is; or can be used after a repair with housekeeping. Of course, this is not the latest version but it should help.
  3. Sync is not a server backup service.
     Sync is intended to save on another device, no backup is the fact that the second device then contains synchronized information. IIRC Sync development ceased, and the replacement when available may include a server backup option.
  4. Recreate the database of bookmarks (including history)
     Unfortunately, recess can only use saved bookmarks, there is no saved history to use. Once the database is re-created, it will continue to store the history but it loses the existing history. This time take steps to save on a regular basis.
     • The backup profile or at least the places.sqlite in this
       Backup and restore Firefox profiles information
       https://addons.Mozilla.org/en-us/Firefox/addon/FEBE/
     • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox#Rebuild_Places_database
  5. Use the new profiles for database testing.
  
  To simplify comparison of the results of the database different files create one or more new additional profiles. Then try to smash the places.sqlite file into the test profile with any other places.sqlite, you want to try. Allows you to directly compare the databases, without seeking to use sync and without changing the Firefox profile work unnecessarily. You can keep a reference profile of studies with the best of the profiles of any shows results of history; According to the best recreated or corrupted database is.
  • Use the Profile Manager to create and delete profiles Firefox
  • CARE, do not rename or delete profiles created once or use anything other than empty folders when they are created. Don't nest in the other profiles. (At least until you know exactly how it behaves - post back if you never consider such actions)

• Multiple and different axis-related channels are on the same graph

  Hello

  I searched the forums and google trying to find out how to trace my 48 channels in a single chart and according to the plots of units he value axis 1 of 4.

  I have 48 channels all of them share the same time base axis.

  48 channels are mixed of flow, pressure, Temp and other bag. The units are located in the 'Units' property to the string.

  I would have 4 axis to account for my 4 units and hold all 48 channels to draw on the same graph, aloted to the axis of sorts.

  Thank you I have maybe for what is right, as it is a small segment of my script script. Help, advice or information would be greatly appreciated. I am struggling to find documentation to know where to start with this.

  Best wishes

  KR

  Hi KR,.

  After talking to my colleagues, I think that you can now have a solution to this, but for the benefit of third parties, the solution is to use "Related curve" scaling in the axis system display 2D of the pane window VIEW. To have this feature enabled you must be using n or n axes systems.

  More information can be found here: http://zone.ni.com/reference/en-XX/help/370858M-01/dlgview/dlgview/view_scaling_manual_dialog/