ISE SMTP settings

Similar Questions

• Test SMTP settings

  There is no place to send a test message an equallogic after having configured the smtp settings.

  any suggestions?

  Simple method is to activate the INFORMATION level messages.   Then disconnect you the interface graphical user or CLI, then reconnect.  Who will send you an e-mail.

• Cisco ISE comments settings problem

  Hi all

  I hope that it will be a miracle.

  I'm unable to remove the San Jose of positions in the settings of comments with the following error ' cannot delete locations: San Jose: location referenced by another configuration. I have attached the parameters and error of reference.

  I checked all the settings in the comments tab and deleted any reference to San Jose, except if it is referenced in the configuration wizard which I wasn't involved in where else this could be referenced and how to remove it please? It is only cosmetic, but to create guest accounts it is frustrating, as shows the San Jose location when they are in fact located in the United Kingdom. I'm under Cisco ISE version 1.3.

  Thank you

  Mark

  It's a bug

  CSCus25245
  Description
  Symptom:
  In point 1.3 of the ISE, under settings - > location and SSID, we cannot delete the default location of San Jose.

  We get the error that it is referenced by another object.

  Conditions:
  ISE 1.3 - seek to remove the default location of San Jose.

• Change the smtp settings in existing account?

  I need to change the settings of smtp on several existing accounts (because the provider has changed their name from mail.nnn to smtp.nnn server).

  In settings, the outgoing (SMTP) server setting only allows me to choose from a drop-down list of smtp servers, i.e. those I have previously placed under different existing accounts. None of these servers meets my need, of course.

  It seems that the only way forward is for me completely re - create at least one of the accounts, and then use its for other existing accounts smtp server where, as much the provider will allow me.

  It is a nuisance because I have to re-enter the filters, move, archive copy to Inbox, sent and write the contents of the folder, move all custom files and probably some other things I thought not again.

  This question was asked previously archived section 'how to change the smtp Protocol. element of the outgoing e-mail server.
  https://support.Mozilla.org/en-us/questions/999283
  As far as I can see, the answers he do not offer a solution. Sorry if I misunderstood or missed another assignment that solves this.

  Tim
  London

  Tools > accounts settings
  or
  Right click on the email account in the folders pane, and then select "settings".

  In the left pane: click on "outgoing (SMTP) Server"
  See the image below.

  You will see a list of your smtp servers.
  Select this option to highlight one in the list you want to change.
  Click on the button 'change '.

  a new window opens, so you can modify the server name.
  

  Click OK

  Click Ok to save and close the account settings.

• E-mail SMTP settings?

  Trying to SMTP mail for a (Synology) configuration settings SIN.

  I tried to use the search engine to find the OS X SMTP mail settings but only found this on Apple's site.

  Information on the outgoing mail SMTP server

  • Server name: smtp.mail.me.com
  • SSL required: Yes
    If you see an error message when you use SSL, try using TLS or STARTTLS instead.
  • Port: 587
  • Required SMTP authentication: Yes
  • Username: ICloud full e-mail (for example, [email protected], not emilyparker)
  • Password: your password iCloud

  NAS request SSL sender name and e-mail of the sender. I tried to use my own, but it keeps just sends me errors. The readings of the error;

  The failure of test mail sending. Please check your settings and try again.

  535 5.7.8 bad username or password (failed authentication).

  This who should I change so it can send messages correctly?

  The error that says that wrong username or password. Are you sure you entered the correct values?

• How to configure SMTP settings to the 'SCAN to Email' function on the XEROX WorkCentre 3615 multifunction printer?

  Separated from this thread.

  Have another QUESTION of community, please can someone help me on how to configure the SMTP 'STEP by STEP' settings to "SCAN to Email" function on the XEROX WorkCentre 3615 multifunction printer? Where should I start? On the computer or the printer? I have gmail emails to serve 'FROM' and for people, I'll send scanned docs, what is better to use email, gmail, at & t, yahoo or so? Thank you in advance.

  Hello

  Please contact Microsoft Community.

  Please confirm which email client do you use?

  I suggest you refer to the article mentioned to implement a multifunction device or an application to send emails with Office 365 for reference:

  https://TechNet.Microsoft.com/en-us/library/dn554323%28V=EXCHG.150%29.aspx?f=255&MSPPError=-2147217396

  I hope this helps. Do not hesitate to contact again us for any technical assistance,

• Settings SMTP for Muse Contact E-mail form

  Hello

  I could not properly set up my contact form on my website hosted Godady I wrote in Muse CC 2015.  I have someone to help me trouble shoot and we need to know where we can edit the SMTP settings, as we believe it must be an SMTP relay for mail mechanism to authenticate and forward the e-mail to me.  Any help would be appreciated.

  Here's the exact support to the Google company message if it helps:

  "Unless you've managed to receive mail from the form at least a link, whether it's Gmail, Hotmail or another place, then the question must be in the web form." If you are unable to locate the server settings that uses the form, then we could proceed to enter the appropriate settings. The parameter of the SMTP relay server is used to route outgoing messages via Google, so in this case he would give us the necessary outcome. »

  
  

  
  

  Thanks, Jeff
  

  Hi Jeff,

  The information that google requires, must be sent to your host - GoDaddy, and they will be able to configure the script php of your form.

  More have a look at this post that can also help - Contact form does not not with third-party host

  Best regards

  Ankush;

• How can I change the outgoing in El Capitan mail port settings?

  My internet service provider recently changed the messaging port coming out (IMAP). How do I change this setting? I can receive messages but not send it. I can send email from the provider's Web site. It's already happened and usually I can send emails for several days. I changed the port settings in the past, but did not figure how to do it since the upgrade to El Capitan.

  If you know where to put the port, but it is not enabled, uncheck the box marked automatically detect and manage settings. Then, you should be able to change the port.

  The outgoing port will be in the SMTP settings. Each account has a configuration which you can access by selecting Edit from the context menu of SMTP.

• The search for my name of SMTP server, I don't have a number

  Hello
  I'm trying to configure my e-mail account in my accounting program (Big Red Cloud) so that I can send emails such as invoices. The installation program asks the SMTP settings you but will not accept those given to me in Thunder bird (Tools > account settings > outgoing (SMTP) server support crowd said they can't help but I need to get my e-mail provider good server name.)
  Unfortunately my screenshot will not download, but I hope that I can help in any case

  Kind regards
  Elin

  Your email provider their name server and affects ports. They can provide this info.
  Although if Thunderbird OK send that info should be on the SMTP configuration page.
  Tools-account-outgoing server (SMTP) settings

• SMTP does not work for my Runbox account

  All my gmail accounts work fine, but the new account (a Runbox one) I add does not work. When I send a message from this account, I get the box "Connect to Server" and nothing happens. When I click on it I get a message indicating the failure of the sending of mail and I should check my email account settings. I checked the SMTP settings several times, removed and added the account more than once, even them configured manually once, still do not work.
  I can receive messages.
  I use Thunderbird 31.3.0 and Windows 7.
  Help, please!

  You can mark it as "Resolved" anyway.
  Thank you.

• could not connect to the smtp server

  Hi all

  I'm on a 21.5-inch iMac using OS 10.11.3 at the end of 2012. Yesterday (and today...) Mail would not send anything and gives me a status 'offline' for sending. I use Gmail IMAP with 2 accounts. The same problem happened to my wife on his computer with the shared e-mail account. My iPhone (4) will send the mail from the same account. If I log in to Gmail directly I can send emails. I deleted the account and re-written information. I quit Mail and restarted the computer. I looked at several solutions in the forums and have tried what appear to be common ones (that I could find), but nothing seems to work. After restart of the account Gmail sent me an email saying I had been blocked for using a "precarious" app, and I checked my Gmail settings so that I can use less secure (as the devil which means?) apps. The problem persists...

  Mail connection doctor says that it is connected to the internet and my 2 IMAP accounts work, but 2 SMTP accounts (I guess for the sending of?) say "not able to connect to this SMTP server.

  It all started yesterday without changing all the settings or preferences that I know.

  Any ideas?

  Michael

  Have you checked the SMTP settings for the latest recommendations googles? Changed something on their end recently?

  You run a 3rd party cleaning apps (clean my mac, mac guardian, etc.) or AN Anti Virus on your Mac? If so, remove them.

  have you installed anything between mail works and does not?

  If so, remove it.

• Configuration of roundcube SMTP Server 5.0

  Hello

  I am unable to send emails from my internal network of Roundcube after update of OS X El Capitan and Server 5.0. ( It works fine from the outside LAN)

  I have to update the SMTP settings in the configuration of Roundcube?

  Also, I find not all configuration settings or Roundcube files in OS X 10.10.2

  Any help will be appreciated.

  Thank you

  RoundCube allows any user to use a web browser to access his mail. It has no separate smtp server, but use the one on the server to send mail. So you must enable the use of these in the configuration of the server after the installation or update.

  RoundCube is normally installed in/usr/local/topicdesk/roundcube or/usr/local/roundcube if you want to look at the configuration. Note that / usr is a hidden directory.

  Leo

• Cannot get SMTP to work, please help.

  Hello

  I recently bought the camera WVC80N.

  The main reason I bought it was to receive alerts of request sent to me.

  I have tried all the different combinations for a week and still no TEST EMAIL failed.

  Here are my specs:

  ISP: Verizon FiOS

  I have a setup of router D-link N as an access point that connects to my FiOS router/modem.

  The camera connected to the wireless D-Link router.

  I tried my ISP's SMTP settings,

  I have Verizon email through Yahoo!, so I also tried these parameters.

  I made an GMX account and tried, without success.

  Can someone please give me an idea on how to get this working?

  Thank you!

  Port 25 is currently being sent to the IP address of my camera.

  Here's how I have my smtp on the camera settings:

  TO:[email protected]

  From:[email protected]

  SMTP server: outgoing.yahoo.verizon.net (I also tried outgoing.verizon.net)

  Port: 587 (also tried 25)

  My server requires authentication: checked

  Username [email protected]

  password: *.

  The connection information, I checked Windows live client of e-mail at work.

• How can I get POP3 & SMTP codes if I use Yahoo as my ISP?

  When I was initially asked to sign up for Windows Live Mail, asked me to POP # and SMTP settings?  Told you to contact your ISP for the codes... Well we have Yahoo, which essentially has no Customer Service and is free, so not much help because of this feature interesting but not useful for Windows Mail.

  We have a router through AT & T to the desktop of the computer on which only attaches to and mine and other laptops wireless using the connection.  I tried POP3.yahoo.mail.com and as well with the help of AT and T.  Or work when sending or trying to receive emails.  Has anyone another reading of these issues, I have this problem of not having the right of 'codes/settings' to establish good routing for Windows and mail addresses electronic Hotmail work and now know how to do?

  Where can I fix this?  I just need the right POP3 and SMTP, and it addresses should Set up my account, correct?  Since I arrived in IE9, I can't even to the installation screen.  But I will cross that bridge when I come to it if I get the right codes...

  I know that there is earned of you out there who had the same question that there are millions of customers of Yahoo, I just left be 4 years ago, but now I need to work because of a planning meeting of issue.

  Any help or where to go is greatly appreciated!

  Shawnascy

  Internet service provider.  I connect to IE and Yahoo gives me my email and Internet service.  If they are not an ISP, what is my ISP?

  Thank you for your answer, but it is not very pleasant tonic...

  Yahoo is a provider of postal services, but not an Internet service provider.  An ISP provides the physical connection to the Internet.  AT & T may be your ISP, but Yahoo is not.

  Using at & T pages have complete settings to access Yahoo through your email client.

• Is it possible to add or use my old account e-mail (SMTP format) on a Windows 7 computer.

  Original title:

  e-mail question

  Is it possible to add or use my old account e-mail (SMTP format) on a Windows 7 computer. I have limited knowledge, so I can not have described the format of the account properly, but hope that someone will know what I mean. Currently I have an outlook e-mail account, but would like to be able to access my old account since I've had it for many years and have so many contacts. I also use it for information of connection on the accounts I have used for a long time. Thanks for any help

  (Moved to programs)

  Hello

  You should be able to add your minerbroadband account to Outlook email

  http://Windows.Microsoft.com/en-us/Outlook/Gmail

  If you do not know the SMTP settings > contact your ISP.