ISE troubleshooting help

Similar Questions

• How can I get a device driver that works for my printer. ? I tried everything I know.it is installed and it must be troubleshoot.help, says

  I can't work. It does not recognize the device driver that I'm trying to fix it with

  Hi dawn,

  I appreciate the efforts to solve the problem. We would like to know more detail with you to help you to come.

  (1) what is the brand and model of your printer?

  (2) what is the exact full error message you get in regards to number troubleshooting driver?

  Follow the steps in the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  Your answers are important to us. Write us with the details asked so that we can help you to come.

• Laboratory of ISE question help ~!

  I'm new and trying to set up a lab to ISE.

  I had download the 1.2 ISE and installed in VMware, but after I finished installing.

  It is not installation type to initialize the ISE. and I try to connect the connection with its ip address page. but it does not work. but I can ping that ip address.

  Help, please.

  Here you have to type the installer instead of connection

• Video driver not updated to the latest version... Troubleshooting help please...

  Hello and good day, group... We have here a few CQ4010F desktop computers. I pushed recently updated Windows and a PC (1PWC) now has a video driver to version less about that. The PC I compare (0SDQ) is great for video with full 1920 x 1080 is available and Acer E211H monitor display. For PC with the issue, the resolution will not be max (stuck @ 1600) and the screen credits. The goal is to get (1PWC) to the full resolution and correct monitor please.

  Here are the specs for the two because both machines are the same for the Prod #:

  Models: CQ4010F, ABA-Prod #NY650AA, stock video NVIDIA GeForce 6150SE nForce 430, stock charge RAM 4 GB, 64-bit, SP1 Win7 (after windows updates)...

  I compared the pilots, and they do not match when comparing machines:

  -(1PWC); NVIDIA, on 14/05/2009, version 8.15.11.8593, signed MS Windows

  -(0SDQ); NVIDIA, 01/04/2010 (new date), version 8.17.11.9739 (latest version), have signed MS Windows HW compatibility Publisher<--- want="" please!!!="">

  I can not get the most recent driver to load on the PC with the question. I pushed for troubleshooting updates driver Windows on (1PWC) several times. All say that the driver is updated? I did a driver update... process also with the reporting of the pilot system is running when it is not.  I went to the site of NVidia and NVidia driver downloads tell me that the correct driver is installed, when it is not. Interesting java Nvidia GPU playback tool said unknown to the GPU video about the PC card product? The 'good' PC reports the right product analysis offshore GPU and offers even update a more current Nvidia driver. I as well before it is rip out together video driver and loads a basic 640 x 480 driver, then start in safe mode and reload the driver proper. But I don't know if I did the steps correct basic video driver load correction method.

  Hope it was not too verbose. I am running "on this feedback rabbit hole an and any circular or troubleshooting tips would be great. Be advised that it is the PC with the southbridge NVIDIA North/South wobbly mobo that also has problems of USB.

  Thank you-

  /WF

  Hello GPS-Tech,
  
  Because the tool indicates the video card as being unknown, that it does not find a driver to update because he does not know what to look for, as well as update microsoft assumes that the driver is up to date because it has no idea of this driver to get.
  
  Your best option is to manually install the driver by accessing the site Web of NVIDIA manually by lifting the video card and the driver installation.
  
  I think it's the right driver
  http://goo.GL/67li4

• Ethernet and is showing connected. Network settings of the Troubleshoot Help?

  a xp and previously no problem on this computer, after changing the settings or implement?, in some way, I lost the ethernet connection. It shows connected but when trying to connect to internet, it fails. any suggestions? THX

  Hello

  Maybe this can help, http://www.ezlan.net/debug.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Cannot run cloud, tried all the troubleshooting help adobe web creative

  After migration system from my old Mac to new - el Capitan, I can't start creative cloud. I tried to just uninstall all adobe, using the reset tools, a few restarts comp, even start in safe mode. nothing help.

  When I launch an application, empty spot appearing between the icons in the menu bar to 10-15 seconds, then the icons range from the rear and window appear that «creative cloud close unexpectedly, send the report to adobe...» »

  What can I do?

  Hi jerryk21498116,

  Please follow the steps below:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall of your machine, see OS x: about the application firewall - Apple Support
  • Turn off the firewall of the security program installed on the computer Internet.
  • Go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

  1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)

  3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager)

  4. then run the cleanup tool to remove the clouds creative and Adobe Application Manager (if it remains in the machine)

  5 right-click on the icon in the Finder, then select 'Go - To' folder.

  6. you will get a text box, type in the following command and then press 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  7. browse to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash

  8. new > right click on the Finder icon and select 'Go-' the folder option > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  9. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD

  Adobe 10 - run cleanup tool. > If present, select "Adobe Application Manager for Mac OS X 10.6" and then click "Clean up selected."

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  11 - click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://creative.Adobe.com/products/creative-cloud

  Let us know if that helps.

• Delete row option does not work, and then becomes grayed out. Need troubleshooting help.

  Hello!

  I hope someone can please help me solve a problem, I'll have a table in my form. It offers a menu associated with each line that allows you to add, delete, reset, lines etc. The name of the table on the form is the array of points of purchase. This is the first table on the form.

  Here are the steps to re-create the issue:

  1. create 3 rows of the table

  2. click on the menu ('X') associated with the first line button.

  3. Select "remove this line. Nothing happens.

  4. click on the menu ('X') associated with the first line button.

  5. Select 'Remove this line' again. Nothing happens.

  6. click on the menu ('X') associated with the first line button. You will notice that the "Remove this line" option is grayed out.

  My best guess that the rows are deleted in the background, which is why if I have 3 rows and 'remove' 2, so my delete option is grayed out because according to me, it makes sense in there as if there is only 1 row then grey can delete lines. I was intending to join the file that I see others it, but do not see the option. I am pleased to provide you with the file by e-mail if that's easier. Thank you in advance!

  Saskia

  I have posted the solution here:

  http://www.fieldeffecttechnologies.com/AdobeForums/PCard.PDF

  Instance Manager methods have been given the wrong index of the line to work with. They should be passed to the index of the row to which the button you press in (of course). Instead, they received a few index v8b, honestly, I can't decipher as to what this number means eventually. (Math.round ((v3-v4) * v6...)?)

  Anyway, I have it repaired and also changed some of the logic in the submenu to determine what is gray.

  I love this feature! It can even show a client!

  Kyle

• Evaluation of posture transmitted by mistake using Cisco ISE

  Hi all

  I would like to help try to understand why a customer who has not been connected to the network for a little over a month has allowed full network access despite being older than 28 days AV definitions.

  We have 2 mandatory requirements of posture,

  1 Symantec Av MUST be installed

  2. the definitions AV MUST be expired LESS THAN 28 days

  Currently, the machine I have watch the defs AV as being 25 March 2013.

  When I produce the detailed report posture, it shows me even that the two mandatory requirements described above were successfully which means that the endpoint is compliant posture. Clearly this is not the case if...!

  Is there anything else I can check on the ISE to help debug this?

  Mario

  Hello

  You may have two problems:

  1 al ' ISE, you have a set global clients not supported of the NAC Agent (Android, etc.) that specifies what their default state of compliance. If the default setting is "consistent" and you do not have a rule in this customer service or you simply do not have client provisioning rules, any machine that does not fit in the provisioning rule (IE thinks them ISE which is not supported) Gets a consistent event compliance status if NAC Agent is installed and that the rules are not met.

  2. problem of ANC Agent version?

  I saw in the papers that you use NAC 4.9.1.6 agent but the latest NAC Agent recommended to be used with (later) ISE is version 4.9.0.51.

  4.9.1.6 is a version of NAC Appliance and Cisco does not guarantee that is 100% compatible with ISE.

  Check

  http://www.Cisco.com/en/us/docs/security/ISE/1.1.1/compatibility/ise_sdt.html#wp78131

  Cisco NAC Agent Interoperability Between NAC Appliance and Identity Services Engine (ISE)
  Cisco supports different versions of the NAC Agent for integration with  NAC Appliance and ISE. Current releases are developed to work in either  environment, however, interoperability between deployments is not  guaranteed. Therefore, there is no explicit interoperability support for  a given NAC Agent version intended for one environment that will  necessarily work in the other. If you require support for both NAC  Appliance and ISE using a single NAC Agent, be sure to test NAC Agent in  your specific environment to verify compatibility.
  Unless there is a specific defect or feature required for your NAC  Appliance deployment, Cisco recommends deploying the most current agent  certified for your ISE deployment. If an issue arises, Cisco recommends  restricting the NAC Agent's use to its intended environment and  contacting Cisco TAC for assistance. Cisco will be addressing this issue  through the standard Cisco TAC support escalation process, but NAC  Agent interoperability is not guaranteed.
  Cisco is working on an approach to address NAC Agent interoperability testing and support in an upcoming release.
  

• Speaker of vlan ISE

  Here's my scenario.

  I have a few industrial machines that does not support the Antivirus and we even put on the field, because of the risk of a security breach. But at the same time, these machines need access to the NAS to copy configuration files.

  My doubt is how ISE can help me put these machines on the network preserving other VLAN of a risk of infection or the loss of data or even inside attacks. There's some way we can apply security on these machines, leaving network access but not accessible to others only with ISE? And when I mean apply im talk to not only keep the vlan inaccessible but certain rules to avoid the use of firewall in the middle.

  We do not yet have ISE but its on the track and im trying to understand how it works.

  I'd be happy to help here. Thank you

  Kaleby,

  You can segement these devices based on the mac address if you like and dump them on their own vlan and also send a (wired) DACLS so that they only have access to specific services. I would like to know if that strikes your condition.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Alpha channel images displays incorrect colors. Need help ASAP! I have samples

  After that update recently in CS 2015.3 which is weird, as I already had CC2015.3, there seems to be a problem with my graphic images of sequelae. The color is now off. I used these graphics in first pro projects before this update without problem. Now without further changes to the sequence, the graphics have all color issues. What is the Adobe issue? I have samples of before and after that I can send... Need help ASAP! Examples of links below...

  Monologue Monday before the update recently in CS 2015.3

  https://youtu.be/9-kKOfUXfEU

  Monologue Monday after update recently in CS 2015.3

  https://youtu.be/tBokuWCGUks

  Please explain what is happening when there where no edit change just a relay audio? FYI I did this process for several projects over the years and this is the first time that I had this kind of problem. I need it fixed ASAP or troubleshooting help, if there is something that I can hurt you please!

  as you may or may not know - he recently was a security update which States that Quicktime player is not safe for windows: it's probably not safe to use Quicktime on Windows more. Gizmodo UK and I think that's the reason why Adobe put in place the ability to import and export some QT Codecs without whether it is installed. That being said, there was also a notion that the player is not sure and the essential elements can remain on your system. You can use a lot of players that is not QT, such as VLC Player. and as I suppose - it is a BUG. It is not supposed to happen. and it's a hypothesis because unless you remove Quicktime and check - we do not know if this problem is solved (I used this term and not "solve" because it is a temporary solution) the question. of course, this is advice from a user like you and use it at your own discretion, as suggestions in the forums.

• Help - why print sequence is off the air?

  Hi all
  I have experimented with a copy of the help system a customer at the same time RH7 w/packer and the RH8 trial, generate output for the help of AIR format. After generating & the .air package and look a new help file .exe, I point out the following: click on the drop down next to the icon print and three options are listed (print this page, the sequence of Print, print all help). Whatever the selection below, print sequence is always unavailable (gray). This is the case when I generate with both versions. Did I miss something in the settings?
  Thank you
  Katie
  
  Katie Carver
  Senior technical editor
  Doc-to-You, LLC

  Thank you, Peter & Rick and sorry for posting and before disappearing! (Bill Murphey... begin to solve the problems and a higher-priority task inevitably lands in turn moments later.)

  Rick, your explanation was very helpful to ensure that I had missed something. I didn't, but for some reason, compiling the WebHelp to a different folder did the trick. (I had been doing the active boxes coming did nothing even if I was selecting the subjects that were in the middle of sequences to browse legitimate.)

  Now that I have compiled the WebHelp to another folder, browse sequences work. I ran the new AIR Conditioner (overwriting my existing .air file), and the printing sequence feature also works.

  Thanks again for the troubleshooting help and have a great day!

  Katie

• Safari 10.0 issues

  After installing Safari 10.0, on OSX El Capital 10.11.6, Safari closes abruptly and randomly. When it works, it seems to be slow.

  They have not test this before release or are we beta testers?

  Hello...

  Perhaps because of Safari extensions, or third party plug-ins.

  Troubleshooting help here > Safari: no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  They have not test this before release or are we beta testers?

  Yes, but that does not apply to Safari of third party modules.

• Safari crashes when I try to print

  I just upgraded to Sierra. I use a version of Mac Mini at the end of 2012.

  If I try to print a web page of Safari printing screen flashes upward and then Safari closes. I can print from other applications including Chrome.

  Can anyone help please?

  Hello

  The problem may be a conflict with the Safari of third party plug-in extensions.

  Troubleshooting help here > Safari: no support for third-party modules can cause Safari to suddenly quit, or have performance problems

• Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please. I have

  Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.

  Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support

• Videos YouTube hang in Safari

  Various Youtube videos in safari will play for a second or two and then hang. The same links work perfect in Chrome.

  I don't know that I'm not alone in this. I have held some time ago, then it fixed itself, now it's back.

  Most YouTube content requires Flash...

  Although it works well in Chrome, try the following.

  Open system preferences > Flash Player then select the Advanced tab, and then click: delete everything in navigation and settings data.

  Quit and then restart Safari to test.

  If you still have problems, make sure that Flash is up to date. System Preferences > Flash Player > updates > check now.

  If the YouTube video content still hangs, you can have an extension Safari or third party plugin installed which is causing a conflict. Troubleshooting help here > If Safari is slow, unresponsive, which closes unexpectedly or has other issues - Apple Support