HDMI connection to the tv is color seepia

Similar Questions

• Satellite program-112 P775: HDMI connection to the TV does not work

  Hello

  For some reason that the HDMI connection between my Toshiba Satellite P775 program-112 to LG TV no longer although he did for some time.

  I tried another laptop without problem.

  I posted the same question some time ago and told to press the Fn and F5 keys, but it did not work.

  Any suggestions please?

  You are right: the FN + F5 switches between the internal and external video output.

  What exactly happens when you press FN + F5? A map falsh menu appears on the screen when you use this key combination?

  On the page of the Toshiba UE driver you can find the Manager command HDMI. This driver is required for your HDMI controller.
  In the case where the output to HDMI does not work, try reinstalling the driver

• Is there a HDMI connection on the HP Pavilion HPE H8-1210 for my HD TV Panasonic?

  I have the HP Pavilion Media Center m8530f that connects to my Panasonic Plasma HD TV with an HDMI cable. Works very well. I'll be able to connect with a HDMI cable to the HPE H8-1210 if I buy one? Is there a HDM I connect? Thank you W7 HP.

  Hello

  Based on this record, it has a HDMI port:

  Video connectors: 1 DVI; 1 HDMI; 1 VGA PORT

  Kind regards.

• Need help on the Acer W3 hdmi connection to the TV

  Have connected a Micro-hdmi cable to the tv. W3 does not recognize a connection. I must be missing something, can not be this difficult!

  Need complete instructions... Thank you

  The cable works with other devices? What brand/model is the TV? (I may have something similar here)

• to RBG - PC HDMI connection to the TV, but do get do not signal

  I'm trying to connect my HP Pavilion DV2 to my LG 32 '' TV with HDMI cables RBG - PC, but I get no signal on the TV. What can I do?

  Photo quality issues: Use a cable HDMI 5 meters (16 feet) long or less. Long distances can cause a degradation of the signal and the possible loss of quality audio and video. For longer distances, use a high grade cable (category 2) or a signal amplifier.
  Image: Make sure that the source of input on the display device is set to the right connection HDMI used - especially when your monitor or your TV has more than one HDMI connector. For example, if your TV is connected to a DVD player with HDMI 2, make sure that the DVD player is configured to use the HDMI in its menu and make sure that the TV input source is set to HDMI 2.
  Audio: Make sure that the HDMI audio is enabled in the digital camera of the source and the audio connection is connected to the audio output connector correct DTV.
  If you are using a DVI-HDMI adapter, you need to connect audio cables separated from the device that sends the audio and video signal in any other device capable of audio playback (maybe it's the TV or monitor is also used to display a video if the device has loudspeakers and separate audio inputs).
  If you try to send audio via HDMI to a PC, make sure that any built-in audio in the BIOS is set to Auto and make sure audio HDMI is selected for the main audio output of the operating system (for example, Windows Audio properties in the control panel).
  For more audio troubleshooting information, see HP TVs - solving Audio problems or using HDMI Audio with a desktop computer.
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00804730&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USEN
  Search Knowledgebase resources
  http://www.HDMI.org/
  FAQ
  http://www.HDMI.org/LearningCenter/FAQ.aspx

• HDMI connection from the computer to the LCD TV has worked once now no signal.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I use Vista. When I plugged the TV to the computer via HDMI, I had the window configure a srceen and respected. It EE work great for a while. Since blocking him off and then try again I don't get a no signal on the display screen, all white.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It's the same for me. In my case, re install the video card drivers helped. It seemed that windows update has messed up the drivers.

• my Dell studio 17 audio does not play on tv with hdmi connected but the video is very good

  I have an old Dell Studio 17 tour with dual processors core T6400 4gig and every time that I plug the HDMI on an external device, the sound disappears on the pc and the tv for 2 years, but the video is great. It never worked, but was not important until lately. Even though I attribute the correct connection including video and audio, no luck.

  Check with Dell support. It may still be under warranty.
  http://www.Dell.com/support

  Thank you

  Marilyn

• U2414H HDMI to HDMI connected to the laptop - cannot set high resolution

  I recently bought a U2414H monitor connected to my laptop via HDMI to HDMI.  I am running windows 7 and I am unable to set the resolution on the monitor.  It is currently set at 1366 x 768, the same as my laptop.  Any advice would be appreciated as it is my first external monitor, so I am new to the terminology. With our thanks

  I went to the Toshiba site and it says that the laptop of 2012 is abandoned. I doubt that its HDMI port is 1.4. But the U2414H HDMI is backward compatible with older versions.
  * Turn off the laptop and the U2414H
  * Unplug the computer U2414H
  * Turn on the laptop
  * Turn on the U2414H
  * Connect the HDMI cable to both
  * Right click on the windows desktop
  * Click on screen resolution
  * See you an image with two monitors? One being the U2414H? If Yes, right click on it and choose extend to the U2414H

• Satellite Pro L770 - how to activate the HDMI connection?

  I have a problem with my HDMI! I connected the HDMI cable to my laptop (L770) and my TV and TV recognized that an HDMI cable is connected. Now, I want to activate the HDMI connection on the laptop with +, but I only have the 4 following posibilities: LCD, LCD + CRT, CRT, LCD + CRT judgements.

  Who could tell me, how do I activate the HDMI? Sould I see a HDMI device in my Device.Manager?

  Thanks 4 your help.
  Tom

  Hello

  Hmm, in some cases the BIOS contains an HDMI output option.
  In your case, I recommend to check this.
  I have not very well if this available but it s m of a value in a control.

  But usually the Fn + F5 should work as described in the user manual... did you check that?

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• U2414H to connect to the PC via HDMI and chaining

  Hi all.  I have two US2414H I am trying to connect to my Dell XPS of 5 years.  The NVIDIA Geoforce GT 740 LP graphics card has only one of each DVI, HDMI and VGA ports.  No DP to all ports.  I managed to connect a monitor with a HDMI to HDMI connection.  The manual says to use cable of DP/miniDP to chain the two monitors together, but I can't get this to work.  I tried switching ends, I plug into which monitor.

  What happens if I got a DP/DP cable or cable miniDP/miniDP, rather than using the DP/miniDP cable supplied with the monitor?

  I begin to fear that, without connecting the monitor 1 via connection DP, I won't be able to Garland.  I'm wrong, or is there a solution?  I'll be forced to install a new graphics card with port of DP?  $$$$$

  I really didn't know that I should be an expert comes to install a COMPUTER monitor.  JSYK, I'm far from being a COMPUTER expert.  Laughing out loud!

  FYI, I was on the phone last night, with Dell technical support, and the representative told me that, without port DP on my PC, I need a HDMI to DVI cable adapter.  I bought one, and it still doesn't work.  Not amused.

  The U2414H has two HDMI ports. Thus, when you open the OSD (On Screen Display) - input Source, you should test both the HDMI listed.

  

  Daisy chain of the U2414H, you need to get a video card with DP or CDM outside.

  In theory, it should work =
  GeForce GT 740 out HDMI--> HDMI to HDMI Cable--> #1 U2414H HDMI in
  GeForce GT 740 out DVI--> DVI to HDMI Cable --> HDMI U2414H #2 in

• How to set the resolution of TV connected to the computer via HDMI?

  original title: new brand lenovo PC, windows 7, connected to my samsung tv with HDMI, screen too large, can not see the button to start clock, icons, etc what do I do?

  I have a new computer Lenovo with Wwhat to do? indows 7; I use a Samsung LED tv for a monitor, HDMI connection.  The screen is too big for the monitor, I don't see the button start, icons, clock, etc.

  Hello

  You can see the following article for more information on monitor display problems:

   

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

   

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-display-quality

  Let us know if that helps.

• Atrix HDMI to laptop computer Vaio HDMI connection does not

  I adapted my Atrix on the multimedia dock, connected power and then connected to the mm HDMI cable anchor on my laptop Vaio HDMI, I have read and understood the firefox browser should be launched directly, but did not, I missed something?

  By the way, I have the kit multimedia motorola set.

  Advise me please.

  Thank you

  There are few things mingle here:

  1. the webtop is initiated when the Atrix is connected to the HD multimedia dock and the dock is connected to the TV via HD.

  2. the webtop includes the full version of Firefox running a customized version of Ubuntu

  3. connect multimedia dock via HDMI to laptop will not work because this HDMI connection on the laptop, the output not in. Also, why put phone firefox on laptop? Just open firefox on the laptop.

  4. connection from computer to phone via USB will launch all apps on the phone. Which allows to "Motorola Phone Portal" (when USB connected) will cause the computer's browser to open and gives you access to some data of the phone - Contacts, SMS, photos and let you handle these things via the computer.

  5 Motorola has another application - Motorola Media Link; You can download and use to manage music and movies.

  6. If you want to use the webtop application when it is connected to a TV, you can, but it takes the phone to have turned on WiFi or an approved carrier data plan - if you want to use internet applications.

• HDMI disappears when the TV is off or another entry is used

  I just started using a new HTPC with Vista Home Premium and a card mother Gigabyte GA-MA74GM-S2H. The TV is a large screen LCD from Sony with 3 HDMI, AV several and other inputs. If the HTPC is running and connected via HDMI to the TV, I turn on the TV to another entry or turn it off, the PC stops the HDMI output and I can't go back except by turning off the PC with the power switch, which, of course, is not closed Vista properly and is ugly. Anyone got any ideas on the parameters that could fix this problem?

  Hello KumbiaKid,

  Thank you for posting.  Is the HDMI connection to your PC on the motherboard or on a video card.  It seems that your problem is driver related, and is a way to refine it to see if the HDMI connection on the graphics card or motherboard.  If she a video card, then an updated driver may solve the problem.  Ati and Nvidia offer updates driver with release notes that show the difficulties and problems known to each version of the driver.

  Please, try to check and let me know if I can offer more help.

  Zack

  Microsoft Answers Support Engineer

• need a HDMI cable to connect to the macbook pro via port USB - C

  Could someone please indicate what cable or adapter I need to run my MacBook Pro to a TV movies? It connects on the port of lightning or another? Thank you Jude.

  No MacBook Pro has lightning ports or ports USB - C.  Most have ports Thunderbolt, and some have even regular HDMI ports.

  The adapter you need to depend on the exact model of MacBook Pro you have.

  Until we can tell you what cable or adapter you need, you must tell us what model of MacBook Pro you have.

  You can watch in the Apple Menu-> about this Mac, option and after the year of model here.

  How to identify MacBook Pro - Apple Support models