ISE with DNS question

Similar Questions

• UDP associated with DNS queries

  I'm transferring the IP tables to the firewall access PIX501 list rules.

  In our IP table rules, we have implemented rules udp to protest the DNS:

  $IPTABLES - a udp_chains Pei d 158.152.1.13 udp - dport 53 - m state - State NEW-j ACCEPT

  $IPTABLES - a udp_chains Pei udp s 158.152.1.13 - sport 53 m state - state ESTABLISHED, RELATED-j ACCEPT

  But when I try to implement the same rule in the PIX firewall, I can't find any syntax that I can use for specified state. Is it possible to do in PIX?

  Also, I noticed PIX firewall act as a protector of the domain name system (DNS). It seems that the firewall will automatically handle udp associated with DNS queries. It means that I need not implement these rules I mentioned above at all?

  Hello

  The Cisco PIX has built warning DNS, so no, you won't have to configure your IP channels.

  Keep DNS:

  DNS guard identifies an outgoing DNS query request and allows only one DNS returned to the sender. A host can query multiple servers for an answer where the first server is slow to respond; However, only the first answer to the specific question is allowed in. All additional responses from other servers are removed. After the client issues a DNS query, a dynamic translation allows packets UDP return from the DNS server. The default UDP timer expires in two minutes. DNS is often attacked, leaving open for two minutes translation creates an unnecessary risk. DNS guard is enabled by default and cannot be configured or disabled. DNS guard performs the following actions:

  Upon receipt of the DNS response, automatically pull the UDP translation on the PIX firewall. It does not wait for the timer default UDP log.

  Warns against the diversion of UDP session and denial of service (DoS) attacks.

  The PIX does not support IP chain rules, you will need to configure ACLs.

  Hope this helps, and if it please note post.

• ISE with AD integration fails

  Dear,

  I'm trying to join the ISE with our announcement without success, below the error recorded in the ISE:

  Description of error: could not find the domain controller, verify network connectivity

  Support details...

  Name of the error: LW_ERROR_FAILED_FIND_DC

  Error code: 40049

  Detailed log:

  Error description:

  Could not find the domain controller in domain 10.10.10.10: there is no domain in DNS

  Resolution of the error:

  Please make sure that your DNS contains records of field: 10.10.10.10, for more information please see the AD DNS diagnostic tools

  Join the steps:

  13:51:40 to join the field 10.10.10.10 user ise help

  13:51:40 searching for DC area 10.10.10.10

  13:51:40 could not find domain controller in the domain 10.10.10.10: there is no domain in DNS

  Even if we have valid records for both AD and ISE in the DNS, I'm able to resolve the DNS name of our AD when NSlookup to EHT.

  I don't know what the problem is?

  Impatience on your part.

  Kind regards

  Muhannad

  Hello

  First of all, your dns can answer srv request by sending the IP address of the AD? You set the ntp on AD and ISE?

  What ISE version do you use? Do you have applied the latest patches?

  When all of these steps were soon, you took a few traces to the ISE?

  On ISE to check your dns server, you can run the following command:

  Nslookup _ldap._tcp.dc._msdcs. AD. Querytype srv FIELD

  Replace AD. OF your AD real domain name, and then paste your result.

  After obtaining this information, otherwise still works, you must make a few tracks at the ISE. If you do not know how, let me know I'll try to make a screenshot on my lab to give a guideline.

  Thank you

  PS: Please do not forget to rate and score as good response if this solves your problem

• Blue square with a question mark instead of a picture

  I'm on Messages to use with your Mac - Apple Support.

  Instead of pictures (or), I get a blue square with a question mark in it.

  This does not happen with all Web sites, but I wonder why it's happening with an Apple site, and how I can see the photos.

  It sounds like a broken image link.

  Post a screenshot if you can, so that we can confirm. The page seems OK after a glance. Command + shift + 4 then do slide on the affected area, add the image to the desktop to this site via the camera icon.

  If you have browser extensions, disable them and repeat the test. Also try a different web browser if possible to see if it is the scale of the system or only Safari. Is - this Safari you use?

• What is the yellow square with a question mark on the page OPTIONS of FireFox? Have a peak.

  There is a yellow square with a question mark on the FireFox OPTIONS / settings page.
  If the mouse enters it, it reacts like it is something to click, but no indication that it is.
  Is it supposed to be there and if so, why?
  He has a POINT of MARK BLACK inside the small SQUARE of YELLOW.
  Any help is appreciated.

  This is the help screen. Press the key.

• In support, forum, signed in, where can I associate with the questions I ask myself? Years back, could get the RSS feed for the question. Always available?

  Where can I associate with my questions about my account? The search for user name does not work. A few years back, you could subscribe to an RSS feed for a question, yours or others. Is - this past, if so, why? How can you save the question, without saving your question text in a document and copy and paste into search? Version of FF 19.0.2.

  Thank you.

  Your messages will now appear in your profile: https://support.mozilla.org/en-US/user/225440

  You can also use the old method of "My Contributions" link: https://support.mozilla.org/questions?filter=my-contributions

  Is that it?

• Mac Pro does not.  It has a box with a question mark?

  My Mac Pro has stopped working all of a sudden.  We stop for the night and the next day, we got a box with a question mark?  Any ideas?

  Hope this helps.

  OS X: on OS X Recovery - Apple Support

• I get a folder with a question mark symbol when I turn on

  I'm giving my daughter my MacBook Pro retina (2013) so I'll try to get it to the factory settings.  I tried reloading ElCapitan and downloaded for half an hour and then says that the download failed.  This happened twice, and now all I get is a folder with a question mark symbol.  What should I do?

  Hey! Take a look at these articles Support from Apple and try basic troubleshooting steps.

  If a flashing question mark appears when you start your Mac - Apple Support

  On the screens, you see when you start your Mac - Apple Support

• Safari on my MacBook Pro retina 9.0.3 15-inch Version 10.11.3 do not show images on some Internet sites. They appear for a fraction of a second then disappear with a question mark in the Center. The same sites work fine on Chrome and Firefox.

  Safari on my MacBook Pro retina 9.0.3 15-inch Version 10.11.3 do not show images on some Internet sites. They appear for a fraction of a second then disappear with a question mark in the Center. The same sites work fine on Chrome and Firefox.

  I suggest you only begin by taking the measures recommended in this support article.

• problem with DNS on the active directory server unique

  I have a client that I'm having a problem with DNS that they do not have active directory structure.  I tried just about everything and at my wits end.  Customers can get online, but the problem is that they cannot see the DNS.  Any help would be much appreciated.

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Problem with challenge Questions/Force Password reset

  Problem with challenge Questions/Force Password reset

  We have integrated the IOM - OAM 11g R2 PS1. When a new user is created through the console of the IOM and tried to login for the first time in the console of the IOM.

  -Accessible via Direct / url of the Web server on port 7777 (by OAM), framework for change of password is visible and challenging questions setting frame is not visible. In this case, I'm not able to reset the password due to errors (popup appears with "Houston-29000 unexpected exception caught:" error). Paste the contents of the log below:

  NOTE: ANY CUSTOMIZATIONS PERFORMED ON ISSUES CHALLENGE *.

  oracle.iam.ui.platform.exception.OIMRuntimeException: Houston-29000: Unexpected exception caught: java.lang.NullPointerException, msg = null

  at oracle.iam.ui.authenticated.firstlogin.model.am.FirstLoginAMImpl.changePassword(FirstLoginAMImpl.java:261)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at oracle.adf.model.binding.DCInvokeMethod.invokeMethod(DCInvokeMethod.java:657)

  at oracle.adf.model.binding.DCDataControl.invokeMethod(DCDataControl.java:2143)

  at oracle.adf.model.bc4j.DCJboDataControl.invokeMethod(DCJboDataControl.java:3114)

  at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:261)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1635)

  at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2150)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:740)

  at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:402)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:210)

  at oracle.iam.ui.platform.utils.FacesUtils.executeOperationBinding(FacesUtils.java:176)

  at oracle.iam.ui.platform.utils.FacesUtils.executeOperationBindingFromActionListener(FacesUtils.java:123)

  at oracle.iam.ui.authenticated.firstlogin.bean.FirstLoginValidatorBean.setPassword(FirstLoginValidatorBean.java:376)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.sun.el.parser.AstValue.invoke(AstValue.java:187)

  at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)

  at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)

  at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)

  at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)

  at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)

  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:92)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1018)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:386)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)

  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:117)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

  Any help.

  Thank you.

  I solved this problem, the problem is due to Bug ID # 17008132.

  Thank you.

• First, I'm joining the forum with a question CS4 and CS5 Suite for Mac. Can someone tell me why it is NOT a place to submit a question as it is here?

  First, I'm joining the forum with a question CS4 and CS5 Suite for Mac. Can someone tell me why it is NOT a place to submit a question as it is here?

  Creative Suites Mac forum seems to be closed, so moved that Creative Suites Windows the Forum of Creative Suites "base".

  Then... Post your question and someone may be able to help... is your question about the installation of the old software on a new Mac?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• CC Desktop App for the Government concerning: the end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  Desktop adobe Creative Cloud for government applications :end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  1. They will be able to download and activate the installation package through CC e package on Internet workstation and transfer with a USB flash drive on a workstation Intranet , hence they can deploy desktop applications to end-user desktops CC?
  2. The deployment of renewal process will work the same as above?

  Government accounts https://forums.adobe.com/thread/1483694 can help

  or

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  or

  http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  Creator of Enterprise Cloud https://forums.adobe.com/thread/1489872 License Restrictions

• Using Windows Powershell ISE with vSphere PowerCLI

  Hey everybody,

  I'm completely newbieand have just started on the track "managing vSphere with powershell. First problem:

  Is it possible to use Windows Powershell ISE with vSphere cmdlets or can I only use the vSphere PowerCLI?

  I wish I could type my commands directly in the window of the ISE and manage my scripts etc because of this (I find myself n always cut and paste from Notepad when you use the PowerCLI).

  If so, how should I do this?

  I guess its something simple, but when I run the ISE seems not to have registered vSphere cmdlets. I guess I missed something?

  Thank you

  Marc

  In the ISE if you run the following cmdlet, you will get the registered PowerCLI cmdlets:

  Add-PSSnapin "Vmware.VimAutomation.Core".

• OBIEE 11 g: fun with gauges Question 1

  Hello world
  
  I play with the caliber of the bulb and more I learn about this, more I get confused. I came up with several questions, however, because I want to give people full credit for each individual response, I'll post several threads.
  
  Question 1
  When you hover over with the mouse the bulb, certain information is displayed. Where does all this information and how can I change the hover in the effect?
  
  Currently, it displays the value of the column in the lines section, then a colon, then the value of the metric then in parenthisis some percentages that have absolutely nothing to do with my data set. It's not terrible, but it's pretty boring. I really wish I could control what is happening out there.
  
  
  Thank you.
  
  -Joe

  Joe,

  When you look at the other types of graphs (Bar/Line), "Mouse Over" parameters can be disabled by:

  1. click on "Edit View" on your results pane
  2. click on "change the properties of the graph.
  3 tab 'Titles and Labels' Goto
  4. under the "Labels" section, you will see an option "data markers.
  5. Once you click the icon (it looks like an 'A') it will open window "Format: data labels.
  6. and you can choose from on tread/always/None

  Unfortunately, this (change of data markers) option is not available for the gauge so that bulb and you can't turn off the setting of rolliver for these types of graphics.

  PS: Am really eager to learn why this setting was not expected to gauge or bulb :) Oracle
  Can you think of something that would be the reason?

  Kind regards
  Jitendra