Issue in RPD with two pools of connections

Similar Questions

• How to design two pools of connections to database even in RPD?

  Hello
  I have a few tables in a database under different users,
  
  first import tables under a user in the RPD, it will create a database of "ORCL" PSB and a single connection pool.
  
  then I inport other tables under another user, these paintings also appears under "ORCL" and did not create another pool of connections.
  When I view the data, it will prompt connection failed.
  
  I know why this happened, because there is a pool of connections, a connection pool is mapping to a single user,
  I try to create another pool of connections, but I think that it is impossible to the mapping of all tables in the specified connection pool.
  
  I also tried to create another data base in DR., it worked. But I think that is not convinient.
  
  so I would ask you how to manage this problem when you face?

  alpha_jiang wrote:
  Hello
  I have a few tables in a database under different users,

  first import tables under a user in the RPD, it will create a database of "ORCL" PSB and a single connection pool.

  then I inport other tables under another user, these paintings also appears under "ORCL" and did not create another pool of connections.
  When I view the data, it will prompt connection failed.

  I know why this happened, because there is a pool of connections, a connection pool is mapping to a single user,
  I try to create another pool of connections, but I think that it is impossible to the mapping of all tables in the specified connection pool.

  I also tried to create another data base in DR., it worked. But I think that is not convinient.

  so I would ask you how to manage this problem when you face?

  You must have 2 different system DSN created for the same database with different/pswd usernames. Either go this route OR
  Create or simply create an object database in RPD ORCL1 in poiniting connection pool to correct the user name and password and DSN. In addition, in the Connection Pool, check the box for "full qualified table name required.

  What shud solve your problem.

  Published by: Deepak Gupta on 12-Sep-2011 00:35

• 5.1 ESXi management no connectivity network with two network adapters connected

  IBM H chassis equipped with blades HS22

  Blades use Broadcom 5709 s dual gigabit NIC

  ESXi 5.0, system worked very well with both NICs connected (static IP) in network management parameters (able to ping in and out). Completed the upgrade to ESXi 5.1 preserving VMFS datastore. After the reboot, management network shows two NICs connected to static IP always assigned but I have not any (impossible in our out ping) network connectivity. If I disable one of the network cards and restart the management network, I can immediately ping inside and out.

  I took a spare blade and tested by passage of 5.0 to 5.1 and 5.1 installation clean, the two producers same results. A host with two active network cards 5.0 (if static IP or DHCP) can ping inside and out. A host with two active network cards 5.1 (if static IP or DHCP) can not ping in our out. 5.1 host cannot obtain DHCP address, but fails to APIPA.

  I found the problem. For some reason, both switches must be actively connected on the same network for observed networks provide correct information for the collection.

• Change of servers with persistent pools automated connection manager

  Hello

  I need to move from my current connection manager server to a new. How do I do this without losing is not my current automated persistent pool and their VM maped-> user?

  Just install a replica connection manager and then just decom original connection manager? I don't make any sense?

  Thanks for the help.

  Hello

  Install a new replica to connect to the server and the original installation reference. Once your new replica is set up you can decommision your original one.

  All of your config data reviews will be preserved than to install a replica instance takes a full copy of the original.

  Finally, you can run "vdmadmin s s - r" on the new replica, and specify the computer name of the original in order to remove all references to the old server connection. See http://www.vmware.com/pdf/viewmanager_cl_tool.pdf for more details.

  I hope this helps.

  Select this option.

• How to create a Pool of connections to two different databases in OBIEE

  Hello

  I have a requirement where few reports coming from databases and a few others to another database. I created two pools of connections and added the frame connection details. But when I created the report I get error as below.

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 17001] Oracle error code: 942, message: ORA-00942: table or view does not exist to the call of the OCIStmtExecute OIC. [nQSError: 17010] Prepare the SQL statement failed. (HY000)

  Now, I would like to see if I can create a pool of connections to two different databases. If so, how that happen.

  Thank you!

  Hi Antonio,.

  Cross database joins are possible, no problem for it. But you do not do so in an object of unique data base in the physical layer using 2 pools of connections connection to the source A and B, then adding objects to A and B children of your unique database.

  You create 2 databases in the physical layer, each with its own connection pool, then you can do your knuckles crossed on the physical schema.

  As a picture is worth a thousand words, take a look:

  

  The physical diagram uses objects of A and B and define the rules of the join between them, it is a cross-database join. But in the physical layer of the database A and B are 2 separate objects each with its own pool of connections.

• AnyConnect with several profiles of connection and menu drop-down

  Hello world

  I configured anyconnect with two profiles of connection and group policies.

  Connection profiles and group policy have the same host name say xyz.com.

  need to know which configuration should I do so that when I connect it should show

  under option group choose the connection profile from the menu drop-down?

  Concerning

  Mahesh

  Mahesh,

  When you build the connection on the SAA profile there is a section in the Advanced section of "group Alias/group URL. Complete on the names you want and enable them. You should then see the two selections on the AnyConnect profile drop-down list.

  In the cli, it looks something like:

  tunnel-group Group1 webvpn-attributes
  enable-alias group Group1

  tunnel-group group2 webvpn-attributes
  Group-alias group2 enable

• Direct DB request - Connect 2 patterns using 2 pools of connections at the same time?

  Hi all
  
  Will be "Request for Direct database" feature allows to connect to two pools of connections at the same time?
  
  Output report is based on the UNION of two select statements from two schemas, two pools of connections are created to access two schematics
  
  First select statement comes from a single schema and second select statement just forming the other
  
  Select Column1, Column2, Column3 from A, B, C
  UNION
  Select column4, column 5, column6 of X, Y, Z
  
  A, B, C paintings come from the first schema and X, Y, Z come from another
  
  How to get the above out put using "application for Direct database"
  
  Kind regards
  SMA

  It is a very bad idea. If you connect to the same base, then it will be much better to simply synonymous and grants between the schema1, schema2 objects so that you can use a single connection. You query will go much quicker since the BI server do not have to run separate queries to stich together data. If the data are two different databases, it is advisable to do some ETL and group all the data in your Data Warehouse database.

• I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.

  I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.  I tried all of the obvious solutions.  Windows 7

  Original title: unidentified network

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with the unidentified network error message.

  Perform the steps from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Answer to us if you are having problems with the unidentified network or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• When I click on to develop, a blue rectangle appears, with two lines connecting opposite angles.  I was able to get a picture in this window.  Can anyone help?

  When I click on to develop, a blue rectangle appears, with two lines connecting opposite angles.  I was able to get a picture in this window.  Can anyone help?

  Hello

  Please open Lightroom and click on Preferences.

  Once the preferences window opens, go to the performance tab, and please make sure 'Use graphics processor' is unchecked.

  After unchecking the option restart Lightroom, and it should deal with the issue.

  Please let me know if it helps.

  Kind regards

  Tanuj

• Computer with Vista unable to connect to the internet through two computers with Windows 7.

  Dear engineers,

  In our House, we have two new computers Windows 7 connect to Wired internet access.  Our friend came in hoping to play some MMO games with us on our connection (it has windows vista).  When we hung everything upward, by linking to our modem, his computer was visible on my husbands computer, but was visible on mine as a media device.  He could see the two computers, but could not get an internet connection and no viable ping.  We checked the network map and he showed my computer with one? related to my husband then connected to the internet.  Inside, there was an announcement indicating that the following devices are not displayed in the network map.  under of course was listed both our friends media device and the computer device.  I searched Control Panel and gave access to anyone on the login to my husbands system as long as me.  What happens if nothing else can I try to have its system you can connect to our internet?

  Thank you for your attention,

  Cerisea

  Hello

  If a computer is not properly visible it generally means that sharing is not set correctly to match your system.

  You must also set your computers with the computer account of the friend as a user on your computer.

  Everyone does not mean everyone wishing to connect.

  If the accounts are presented only for John, Jill and Jack, setting in the folder with all permissions saves the effort of definition permission separately for John, Jill and Jack.

  Everyone isn't everyone group, only John, Jill and Jack.

  In general.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Connect 2 switches SG200-26 with two VLANS separated

  B "H".

  Well, I'm going to cry uncle and ask the community of cisco to help here... Here's what I'm trying to accomplish.  I have two cabinets in a data center with four available cross connect cables.  I want to put in place two discrepancies between the two switches which will each be a vlan through to the other.   My vlan by default contains all my servers on it (10.0.0.0/8) and my backup vlan (192.168.200.0/24) will only be used for data backups and iscsi traffic.  For the moment, I have a cable connecting the two switches and it works very well for the vlan by default.  When I add a second cable and set it on vlan 200, no matter what I try settings it just does not pass traffic.  I'm sure I'm doing something wrong, stupidly, but well, I never claimed to be a networking expert, that's why I'm here asking for help!

  I have made several attempts to get the second connection works, marked, unmarked, trunk, access, etc.  Can someone be tell me is this the real solution, or point me to the documentation, so I can solve this problem?

  Thanks in advance!

  Hello Yitz'har,

  SG 200 switch does not support EMU, PVST and PVST +. None of the products of small businesses currently support any proprietary protocol which is not IEEE or equivalent. The exception to this idea is COP which was added about 18 months in the LWA 1.1 releases to better integrate voice, onplus solutions and interact with business networks.

  Work that we discussed yetserday in your case is to disable the covering tree generally define the bpdu filtering.

• ASA with two internet connections

  Hello

  I want to connect an ASA with two ISPS for internet traffic, one for the VPN S2S, there is a router VPN dedicatet on the second link.

  In case of failure of the first link, the second must be enabled.

  route outside 0.0.0.0 0.0.0.0 10.20.20.1 1 track 1route backup 0.0.0.0 0.0.0.0 10.20.30.1 254
  
  route backup 192.168.0.0 255.255.0.0 10.20.30.1
  
  Is this configuration working?? 

  Hello

  You need to configure the 'als' monitor configuration to monitor some destination on the main IP address ISP for the ASA whether the connection works. Probably an IP address on the public network.

  SLA 1 monitor

  type echo protocol ipIcmpEcho outside interface

  NUM-packages

  timeout

  frequency

  SLA monitor Appendix 1 point of life to always start-time now

  You will also need a configuration related to 'track' of the order

  track 1 rtr 1 accessibility

  Route outside 0.0.0.0 0.0.0.0 10.20.20.1 track 1

  Backup route 0.0.0.0 0.0.0.0 10.20.30.1 254

  The above combined with the routes you mention should be enough about the delivery. Naturally for each remote VPN L2L network you will always need a specific static route on the SAA to the backup ISP device.

  Also you must naturally maintain the translations on the SAA. Seems that your ISP links have in mind a separate device that contains public IP addresses. So am I right in assuming you pass all traffic from the LAN links for links to PSI via the ASA without any type of NAT, and leave these routers from the private to the public NAT?

  -Jouni

• URGENT! Two physical network with two subnets completely - no bridges - interface cannot connect both

  This is my urgent problem:

  I have a physical machine with two physical network interfaces. I have a VMWARE player and a virtual machine that must use cards on two different subnets, a public directly to the router and an intranet within the company.

  How can I just say a net card to go on this submarine and the other on the public void?  Go crazy. Help, please.

  Thank you

  P.

  Use the virtual network editor VMware Player, create an additional bridged VMnet and bind each bridged to a different physical network... card VMnet on a virtual machine, create a virtual network adapter on each subnet and bind each virtual network adapter to an another VMnet jumpered.

  For additional help with virtual network Editor, check this KB: VMware KB: using the VMware Workstation virtual network editor

• Copy RPD between two circles

  Hello
  
  If anyone can help with the process of copying of an RPD between two environments (development to production, for example).
  
  Thank you

  See this link

  http://www.rittmanmead.com/2008/04/28/migration-OBIEE-projects-between-dev-and-prod-environments/

  Make sure you have all the TNS entered in the TNSNames.ora file in the new environment. To match the details of the database data in the connection to TNS entries pool if they point to the correct database.

  I hope that the structure of RPD is same in both environments IE users, groups are same.

  Kind regards
  Sandeep

  Published by: Monin sandrine on November 24, 2010 08:56

• FGV with two types of variables

  It goes something like this

  I want the FGV having a cluster of two tables 1 d of double (which will be the variable of the FGV). and the data that I am 'Add' is a double issue / constant (whatever), it will be the additional variable.

  the main idea is that I want to be able to choose to which one of the two i added the extra number and I think that it is quite easy to achieve with a simple Boolean control (reference) and the structure of the case, that's what I did.

  the problem is that if I what that it either does not connect the FGV labview shift register does recognize as the FGV variable, that I have just described, and if I do, it's an extra entry which I don't want to use it later.

  in theory, I can do my extra variable to be also a cluster with two tables 1 d of type double, however, given that my entry has a single issue, I do not know how to accomplish it.

  Thanks in advance.

  It would be good to know if something like this is even possible. (first option)