ASA with two internet connections

Similar Questions

• Two internet connection on the same PC (WiFi and ethernet)

  I have windows 8.  I have two internet connections. A cable (wired) and another in the microwave (wifi).  Normally isn't a problem because desktop computers are on the cable connections and the TV, laptops and other toys are on wifi.

  But sometimes I want to use two connections on a PC, like download a large file and stream and watch the Broncos game at the same time. I want to use Ethernet as a main and did use WiFi when Ethernet is too busy. I can't understand how to do this.  Anyone know?

  Hi Gerard,.

  You can activate the Wifi and cable connected at the same time, but you can use the Internet from one of them. The computer will prefer the cable if the cable is connected.

  If both are capable of providing Internet access, computer will prefer the wired (Ethernet) network to access the Internet (and not use the Wifi network to access the Internet).

  The advantage of using two connections is to get Internet access without interruption when a connection does not work.

  I hope this helps! Let us know if you have other problems with Windows in the future.

• Having trouble with my internet connection through wifi. N600 router is what I think.

  I had some problems with my internet connection recently via my wireless router. I get the little triangle yellow and with the connection at different times and I can't call my local internet provider because it still works when they are open, and then it closes when they are closed. I recently bought a Google Chromecast and some think it might interfere with the connection, but I don't see how. When I reset the modem router and cable by unplugging and plug their return they sometimes get the rear connection but it's annoying not knowing when it will go off again, then come back. A few months before the connection out sometimes but not several times a day. If you need additional information such as the type IP DNS stuff I can get it. Also recently I have updated the firmware of the Netgear if that makes a difference. Thank you!

  Thanks to all who responded. I talked to my ISP and discovered that the modem was abandon the connection because he was old and he sold me a new and things work fine now. Thanks again!

• Problems with the internet connection, Aspire V15 - V3 - 575G

  Hi, I bought a new laptop and have problems with the internet connection without having to install other programs.

  The problems are the following:

  • I use an ethernet cable to connect and just after passing on the laptop, there is no Internet connection at all. I have to restart the router to do.
  • When downloading or uploading brokes down at intervals of 30 seconds - 1 minute. It is not always the same. Sometimes it works 3 minutes, but it is not enough.

  He has Win10... With my old laptop with Win7, I had no such problems. I do not change ISP.

  I don't know what to do to fix it. I have not tried to uninstall Acer applications yet. Have you experienced something similar?

  Thank you very much for the reply.

  Plese try this:

  device, right-click on your network card Realtek Manager choose uninstall and tick to uninstall the software if requested, restart, and then try again to install the downloaded driver.

• I installed AVG 9.0 and now I get the following MSN Explorer pop up of message.__You are unable to connect to your e-mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  I installed AVG 9.0 and now I get the MSN Explorer pop next message.
  You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  Sure.  Analysis of your e-mail anti-virus program:

  • Can slow to receive and send messages, or even fail.
  • Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
  • Is not necessary.  If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.

  Here are a few web pages accurately:

  Why you don't need your anti-virus program to scan your e-mail
  The other threat email: the Corruption of files in Outlook Express
  Why some antivirus software can change the settings in e-mail programs
  Email scanning - advantages and disadvantages

• When I start my computer I get the message "Windows Live Mesh, there might be a problem with your internet connection make sure computer connection and try again, I run Windows Vista"

  I run Windows Vista.   Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.

  connection.   Ensure that the computer is connected to the internet and try again".

  My computer is connected to the internet, and it works very well.   How can I get rid of this annoying message.

  I tried all means to find this file on my computer, but it does not appear to be

  Can you help me please

  Mike Gray

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the check and the boot if the problem persists.
  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135 
  
  Hope that helps.

• Problems with our internet connection

  Hello, I have a all in one HP touchsmart PC (running windows 7), and he has problems with our internet connection. I dot know if it is in the right section, but this seems to be the best in the class.

  The rest of my house to connect to our router fine (iphone, iPad, computer laptop) except this PC. I CAN connect to the router, but 5 minutes or later, he has a X red on the connection and said "the settings saved on this computer do not match the requirements for the network" I looked everywhere online for this, but it remains stubbornly disconnects every time.

  I tried to delete the network and try again, but he still has a red X and the message more each time. I tried to connect and Ethernet cable, still no luck. I am very desperate to solve this problem, because it's what I use for games. Can someone help me please? It would mean the world to me if someone could help me solve this problem.

  If you don't mind keeping this Ethernet cable connected, you might have a solid connection if you come to turn off the wifi connection completely and rely only on the cable.

  Here's how:

  1. Press on + R to display the run box, type ncpa.cpl , and then press OK.
  2. Right click on the wireless network connection and choose disable.

  That's all.  You can always reactivate if you wish.

• When I click on to develop, a blue rectangle appears, with two lines connecting opposite angles.  I was able to get a picture in this window.  Can anyone help?

  When I click on to develop, a blue rectangle appears, with two lines connecting opposite angles.  I was able to get a picture in this window.  Can anyone help?

  Hello

  Please open Lightroom and click on Preferences.

  Once the preferences window opens, go to the performance tab, and please make sure 'Use graphics processor' is unchecked.

  After unchecking the option restart Lightroom, and it should deal with the issue.

  Please let me know if it helps.

  Kind regards

  Tanuj

• VPN IPSec ASA with two ISP active

  Hi ALL!

  I have a question.

  So I have ASA with 9.2 (1) SW connected to ISP with active SLA.

  I need to configure redundant IPSec VPN via ISP2, while all other traffic must go through isps1. In case if one of the ISP goes down all including VPN traffic must be routed via ISP alive.

  I have configured SLA and it works.

  ciscoasa # display route performance
  Route 0.0.0.0 isps1 0.0.0.0 10.175.2.5 5 track 1
  Route isp2 0.0.0.0 0.0.0.0 10.175.3.5 10 track 2
  Route isp2 172.22.10.5 255.255.255.255 10.175.3.5 1 excerpt 2

  Here we can see if isps1 and ISP2 are RISING, all traffic passes through isps1, but traffic intended for the remote peer IPSec 172.22.10.5 passes by ISP2.

  This configuration works just at the moment when isps1 or isp2 is down or if a static route for 172.22.10.5 deleted. Where two Internet service providers are increasing to ASA does not send the next remote IPSec datagrams.

  ciscoasa # display running nat
  NAT (inside, isp2) source static obj-INSIDE_LAN obj-INSIDE_LAN destination static obj-REMOTE_LAN obj-REMOTE_LAN no-proxy-arp-search to itinerary
  NAT (inside isps1) source static obj-INSIDE_LAN obj-INSIDE_LAN destination static obj-REMOTE_LAN obj-REMOTE_LAN no-proxy-arp-search to itinerary

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec pmtu aging infinite - the security association
  card crypto cm_vpnc 10 correspondence address acl_vpn
  card crypto cm_vpnc 10 set pfs
  peer set card crypto cm_vpnc 10 172.22.10.5
  card crypto cm_vpnc 10 set transform-set ESP-AES-256-SHA ikev1
  86400 seconds, duration of life card crypto cm_vpnc 10 set - the security association
  card crypto cm_vpnc interface isps1
  cm_vpnc interface isp2 crypto card
  trustpool crypto ca policy
  isps1 enable ikev1 crypto
  isp2 enable ikev1 crypto
  IKEv1 crypto policy 1
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400

  ciscoasa # show ip
  System of IP addresses:
  Subnet mask IP address name interface method
  Vlan1 in 192.168.2.1 255.255.255.0 CONFIG
  Isps1 Vlan2 10.175.2.10 255.255.255.0 CONFIG
  Isp2 Vlan3 10.175.3.10 255.255.255.0 CONFIG

  The main question why?

  Thank you in advance,

  Anton

  Hi anton,.

  If you check the log message on your ASA R301-IS , he's trying to build the tunnel VPN with both IP and it receives packets of asymmetrically your distance ciscoasa.

  TO avoid this asymmetrical connection, point your IP from peers as primary & secondary on your R301-EAST

  set peer 10.175.3.10 10.175.2.10

  Delete the track on your routing entries

  Route isp2 172.22.10.5 255.255.255.255 10.175.3.5

  This should work for you.

  Similalry lower your ISP 2, you should see VPN tunnel is mounted with isps1 one.

  HTH

  Sandy

• Satellite U500 freezes with USB internet connection

  I have a portable Satellite U500 bought in Australia and I have a problem that when I connect to my mobile internet it freezes.

  I tried two different mobile internet providers thinking that maybe it's a problem with them, but both are the issue. I tried to put in different UBS ports (as there are three of them) and it freezes again any port. Via USB thumb drives in one of them or connection USB keyboard/mouse does not cause a problem, so I don't think that it can be USB ports.

  When I connect to internet via LAN to work I have no problem. I scanned my computer from viruses and its own. Frost occurs with mobile internet USB only and has only started in the last two or three months, I've had the laptop since December, running Vista.

  Help? Does anyone else have this problem?

  Which vendors you've tried?

• Two internet connections - that I don't want.

  I have Windows XP and a Belkin N Wireless Modem Router.  I seem to have set up two wireless network connections - "Nina", which is the right one and another called "Nina 2".  I do not remember to do this last, but it keeps appearing with the lower right icon that indicates a connection or other on my laptop and netbook.  'Nina 2' is not working properly and I want to get rid of him and just keep the 'Nina' reliable.  How can I do this?   I tried to look at my internet connections, but only 'Nina' appears.  Honestly, I can't think how "Nina 2" arrived there and just want to get rid of it because it interferes with my getting on the internet with my laptop and netbooks.  Help!

  Thank you.

  Ninaanne

  Hi Ninaanne,

  The configuration of the router? You have several THAT SSID configured on the router?

  Before checking the router, try click on start-> Control Panel-> network connection-> manage wireless-> and in the list that you don't want to delete. If you delete the name of the list, you can still get Nina2 listed in the Wi - Fi connection but do not connect automatically.

  I think its something in the router.

  I hope this helps.

• Problems with the internet connectivity and support

  I have a HP Pavilion Elite HPE-510y running Windows 7 service pack 1, 64-bit, and now I'm having problems with getting updates requiring internet to install. There is nothing wrong with the router of my family. I tried to put my desk right next to the router since I use a wireless connection, it did not work. Not even when I plugged the router it still didn't work. Diagnosis, troubleshooting and self-help does not identify the problems that are there. There is no sign of the virus. I tried toggling with the security, firewalls, options and reconnect to the internet. Nothing is fixed. Windows is unable to use the online services. Flash Adobe updates do not install limit I can watch YouTube amout. Norton Antivirus will not install updates with Liveupdate and difficulty of internet connectivity. I can't go through the itunes store. I can't even get the Microsoft Word dictionary. Whenever it is said, I don't have an internet connection, and I can always look up on the web, no matter how far I am. Cela and cannot load configuration error 8921-251 which. Windows updates always work for some reason any. I am at a total loss and spend nights trying to figure it out. I could really use some help.

  It seems that this Norton Security...

  «LiveUpdate_solved"in «Norton 360"»

  The article of the author "rab60" contains detailed instructions on the Live Update solution.

  You could try a more thorough search of Norton Community Forum... I do not use Norton and cannot comment on if none of the solutions work.

• Unable to connect to the internet using my cable broadband from sky. He said that there is a problem with your internet connection.

  original title: connection to the sky

  Hi I have a dell Inspiron mini and when I put my sky broadband cable said inside connected to the internet, but when I opened a page it says there is a problem with your internet or something.i have also the wireless network connection, but I think one of my kids messed with the parameter as , I can't use the wireless setting now.so if anyone has any answers I would be grateful.

  Hi Kerry,

  I would recommend contacting Sky support with their internet service:
  http://www.sky.com/HelpCentre/contact-us/
  One thing, you can try on your own is following the instructions in this Microsoft article and running the Fixit tool:
  http://support.Microsoft.com/kb/299357 
  I hope this helps.

• E1200 Cisco must serve as a thread with no internet connection

  I have a Cisco E1200, I want to use it as a local area network wireless. I want to start it in my car while my children can play minecraft wireless set on the same LAN with out having to use an Internet connection.
  If it is possible to explain it please.
  Thank you

  No, britainblues. The router Cisco E1200 is not designed to be used as the LAN wireless (WLAN).

• problems with the internet connectivity and card # 2 microsoft tun miniport

  Hi, I have problems to connect to the internet and my laptop tells me them a problem with the modem / router. However, another laptop computer connected to the modem/router even works very well. in the Device Manager was an exclamation mark beside "teredo tunneling pseudo interface 10. then it disappeared and I found myself with an error with «#2 microsoft Tun miniport map» now his party in error teredo. I still only have a local internet connection i.e. no internet. not really have a lot of knowledge when it comes to computers. any help would be really appreciated.

  Hello

  You can try the steps in the similar thread to the next with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Teredo-tunneling-pseudo-interface-this-device/757db042-c91e-464c-B963-c1f442fdf925?page=1