Issue of ACS Windows Agent

Similar Questions

• THE ISSUE WITH ACS REMOTE AGENT LOG

  Hello guys,.

  I installed a Cisco ACS SE with version 3.3. I try to configure for sendo journal acs agent remotely, but it does not work. I installed acs remote agent and I activated the registration service during the installation. ACS appliance may communicate with the remote agent, but ACS cannot write logs on the Remote Agent. If I look at logg on ACS its OK, but when I look at the logs on the Remote Agent Windows there is nothing there. Could someone help me?

  Thank you

  Hello

  Please try logging configuration remotely as shown in the link:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/3.3/user/guide/r.html#wp952633

  Kind regards

  Anisha

  P.S.: ACS 3.3 is out of life and support. Please install the latest version.

• Microsoft has stopped issuing licenses for windows 2008R2 Enterprise edition?

  Please specify if Microsoft has stopped issuing licenses for windows 2008 R2 64-bit Enterprise edition.

  Kind regards

  Aravind.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• NMS Windows agent not default mark

  New to NMS so not too well why the windows agent is not voting? Someone here has guidelines to help out me?

  Had to reinstall but all good now.

• If the case change the ip address change active directory Microsoft that this issue face our windows network.

  If the case change the ip address change active directory Microsoft that this issue face our windows network.

  as matter
  1. any client machine ip address change.

  Hi Andrew,

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information is useful.

• Management of files of the Windows Agent

  Hello

  For the moment, I have a problem with the management of the Windows Agent files.

  My Situation is:

  • I have a specific file
  • Content of the file is not added, the first line is overwritten

  Example:

  Contents of the #1 file

  WARNING on 09/03/2016 13:00 BSM/CSM SessionError "[138:742] backup session" 2016/03/09-51"specification of backup...".

  Contents of the #2 file

  WARNING on 09/03/2016 14:00 BSM/CSM SessionError "[138:742] backup session" 2016/03/09-52"specification of backup...".

  The Agent does not recognize the new content... If I add a line, all right.

  Agent configuration:

  [filelog |] HPDPSessions]

  Directory = D:\Syslog\

  include = * .log

  Charset = UTF-16

  Tags = {"appname": "HPDPSessions"}

  exclude_fields = host name

  Is it a possible workaround?

  The agent only supports the collection of messages to log in the annex. Why the lines are overridden?

• With the help of Windows agent to send log files

  Hello

  I really need to understand the sending of log files by using the Windows agent.  I have seeen your doc about this and it is a bit easy.  Then the event_marker is complicated.  The example shows a bunch of control characters and braces.    I need to understand the parameters event_marker.  Which, in a text file suggests that there must be a event_marker?

  Thanks in advance,

  Michael

  Hey Michael - don't know how I missed this one! The event_marker is a regular expression that is known to match the beginning of a new log message. For example, say I have the following logs:

  2014-03-27 10:29:38, 534 [pool-35-thread-1] DEBUG opId = com.vmware.sps.qs.notify.VasaProviderInfoNotifier - survey for the VASA provider changes

  2014-03-27 10:29:38, 540 [pool-35-thread-1] DEBUG opId = com.vmware.vim.query.client.impl.QueryDispatcherImpl - send request:

  declare default element space namespace "urn: vasa;

  declare namespace qs = "urn: vmware:queryservice";

  declare namespace vim25 = "urn: vim25";

  declare namespace xlink = "http://www.w3.org/1999/xlink";

  declare namespace vasaData = "http://data.vasa.vim.vmware.com/xsd";

  declare namespace vasa = "http://com.vmware.vim.vasa/1.5/xsd";

  for $doc in //VendorProviderInfo

  return

  {data ($doc/vasa: back / vasaData:uid)})}

  2014-03-27 10:29:38, 543 [pool-35-thread-1] DEBUG opId = com.vmware.vim.query.client.impl.QueryDispatcherImpl - recorded flow (QueryResponseMonitor): 27227

  You can see how the second message is a multiline message. If you do not specify an event_marker then the multiline message will be divided into individual events. However, if you specify an event_marker with a regular expression that matches the start of an event, then it will not break the message upward. For the type of message above, I could use an event_marker like:

  {event_marker = ^ \d{4}-\d {2} - \d {2} \d{2}:\d{2}:\d{2},\d{3}

  Which matches: 2014-03-27 10:29:38, 534

  The event_marker can be as short or as long as you want, but you must ensure that the regular expression that you specify is guaranteed to match a new event. I hope this helps!

• Issues of compatibility windows 7 and acrobat 6.0

  issues of compatibility windows 7 and acrobat 6.0

  You have a question? AA6 is not fully compatible with Win7, probably not at all to a 64-bit system. The recommendation is to buy AAXI. If you manage to install AA6 on Win7, you can optionally change the port of the Adobe PDF printer to FILE and then print to file. It is a PS file and will then be run through Distiller to obtain a PDF file. This may or may not work for you. I've experimented with AA5 and managed in this way for a Win7 32-bit system. Not a great solution, but it may meet your need.

• Active Directory + ACS Remote Agent

  I have a camera ACS (3.2). I understand that I need to use a remote ACS agent installed preferably on a domain controller, Windows authentication. My question is: if I use Active Directory, can I not use external user databases and configure generic LDAP with the appropriate settings to access Active Directory? So I wouldn't need a remote agent? Or I have to use external user databases and configure the databases Windows (which means using an external remote agent? Or I can choose two methods? His confusion as active Direcory cann support for pre-2000 windows domains and I do not know which method of mapping of external user database to use.

  My apologies, missed the word "apparatus" in your original post.

  You can probably do this use anyway, I guess, even though we suggest using a Remote Agent with the Windows DB. If you are not going in this direction, make sure your security permissions (http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacsapp/raig/rawi.htm#642394)

  I've had users use the LDAP with Windows Ad database before and it works very well, the only difference (IIRC) is you don't get all the group maps of Windows with this method, but for the authentication of the user only, it should work fine.

• Unit of ACS and agent remote test

  Problems with unit ACS integration with Active Directory. Have installed the remote agent on a member server and the ACS unit can enumerate Active Directory groups correctly so there is at least some communication happening.

  Looking at newspapers in the remote agent whenever a request for ad groups comes through see you the corresponding journal entries. When a user tries to authenticate that there is no future logs through the remote agent. So maybe it is not sent to remote agent?

  In the authentication failed, connect GBA, the error is unknown user, it shows the correct username + domain name such as the person trying to authenticate.

  Windows Server is configured for a unknown user policy.

  Version of the ACS is 4.1.1.23, Remote Agent is the latest available version.

  Any ideas or things to check?

  Hello

  According to the guidelines of your last line, it seems that the ACS and RA worm are not even. Please note that ACS and RA device software worm must be same or it won't work.

  Kind regards

  ~ JG

• ACS Remote Agent

  HI guys,.

  I installed the Remote Agent ACS on my AD controller. I can add the agent to ACS... but I do not see the Windows authentication avaiable in the agent...

  The Agent runs with a service account that has all rights AD.

  Anyone able to help?

  Make sure that this worm device software and remote agent are the same.

  To display the version of CSAgent.exe, type csagent.exe - v, and then press ENTER to command line

  C:\Program Files\Cisco\CiscoSecure ACS Agent\csagent

  Kind regards

  ~ JG

• ACS Remote agent problem

  Hello

  I have problem with authentication remote agent acs for VPN connection, I want to remove the agent and point to another server I click on this remote agent and then remove and apply it gave me the error below:

  This Agent is used for NT authentication, this must be reconfigured until it can be removed

  What should I do to remove it?

  I also want to ssh to the machine what is the default username and password?

  THANKSSSSSSSSSSSSS

  What is the ACS version you are using?

  To watch 4.2/4.1

  Database of external-> users

  Configuration of the database->

  Windows database->

  Configuration of external user database->

  Database user configuration Windows->

  Agent selection remote Windows

  And remove agents here.

  ___

  HTH. Please rate this post if this has been helpful. If it solves your problem, please mark this message as "right answer".

• Using the windows agent for the staging of some support teams and monitoring Service

  Hello

  We Foglight and use agent windows for tracking service and for the moment all our alerts lead to direct e-mails to our redress system, which in turn, their analysis and create tickets.  what I need to be able to do is direct services (when down) different teams - is it possible with Foglight?  IE we have implemented an agent of windows on a server and run the rule of services monitored on this server - then it must be said if the service is low it goes to the windows supports guys and if the function b is low t goes to the application support team.

  all advice appreciated!

  See you soon

  Davie

  Sure, ok, so it's not hard anymore:

  Fatal level:

  • Set a variable of severity level, called host name, of expression of type, defined as restore the extent?. host?. name
  • define another variable level, called serviceName, gravity type expression, defined as restore the extent?. name
  • define an other severity level variable, called Prospect of expression of type, defined as:

  serviceName = scope.get ('name')

  Format = null

  switch (service_name) {

  case "Alert": Prospect = 'Documentum Team. "

  Break;

  case "SQL Browser": Prospect = 'DBA Team. "

  Break;

  case "RasAuto": Prospect = 'external team '.

  Break;

  default: Prospect = 'MS Server Team.

  }

  return of prospect

  • Finally, define another variable of severity level, called matiere2, of type message, defined as @hostName : Fatal: Service @serviceName is down (@teamName)

• Network issues on the Windows 7 host running Microsoft Virtual PC

  Anyone have problems with network connectivity to a host machine during execution of Microsoft Virtual PC?  The host machine is running Enterprise of Windows 7 SP1 64 bit running with Microsoft Virtual PC with Microsoft Vista SP2 32-bit Enterprise.  Recently, I had the updated video driver to host MicrosoftUpdate for Windows 7 system level where the trouble started.

  What necessary information needed to troubleshoot network connectivity to host for running Virtual PC system?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Restoration of a Cisco ACS Windows 3.3 to a problem of acs 3.3 applicance

  Hello

  I have now built an ACS appliance and trying to restore the current configuration and the database on the windows machine. When I run the restoration on the GBA unit, it says it restores but does it again an hour later. Then when I reboot the box, I get a connection message invalid admin and need to reset it using the cd.

  Everyone comes through this?

  How to solve it?

  See you soon

  KeV

  Kevin,

  Has he any security set to windows backup, that is to say 'allow all IP addresses' to connect to the Admin user?

  If you try from another computer you same message?

  ~ JG