Issue of encryption of RADIUS

Similar Questions

• Issues of encryption on external drive

  Hi all

  Been a while on here and that's all changed so forgive me if I ask a question has been asked before.

  I have a Macbook Air with El Capitan running. I have an external hard drive that I use for backup and the media and there are 2 partitions and carry media1 & backup1. Today I decided that I would like to encrypt my backups on the partition. During the process, it has failed with an error message. I don't remember what he said. Later however, he said that the score was not recognized and I wanted to initialize. Also my Media1 partition was all messed up showing the names of the folders but nothing inside and wrong icons etc.

  I thought I had wiped or corrupt it. I rebooted and removed and reconnected etc.. Same message every time. Disk utility (which is horrible now) couldn't do anything for me. I was resigned to the fact that she was ruined. But then I disconnected the hard drive and plugged on my work iMac which is still ongoing Yosemite and it is mounted as usual, everything is still there! I am relieved, of course, but when I plug in my laptop does the same thing again, cannot recognize etc. So now I can't see any content on my laptop, but my office is very well.

  I ran a complete repair hard disk in disk utility on my iMac and the two mount very well and I can see everything, but when I put it on my laptop, same error message "the disk you inserted is not readable by this computer.

  Someone has ideas about how to work on my laptop again?

  Wow the answer here!

  Anyway if anyone reads this and has a similar problem, I solved it. I went FileVault and disabled encryption on my main hard drive. Once I restarted my external drive was still legible. I have encryption turned on and everything is fine. It seems if you have your hard drive encrypted, you cannot encrypt your external, or at least that's what caused it in my case.

• Related issue of encryption-decryption Leap blackBerry!

  Hello

  In Blackberry Bond can encrypt us our data twice?

  Means that if I hello.txt in the sd card before use "Setting--> security" and privacy--> encryption--> Media Card Encryption Can quantify us this txt file using some application designed by Blackberry developer means app in Blackberry World or some other developer SNAP etc.?

  I thought of the computer which is very common that twice or three times of encryption-decryption with different algorithms, maybe I'm wrong, because there is no special data used by me except songs movies & cats!

  But as a software developer, I'm curious about encryption!

  Use AES-256 encryption & according to EETimes Blackberry claim huge time to break the encryption that made by AES - 256!

  But today I read new Dutch police 'reading' Blackberry emails

  If good authority can crack the encryption, then the bad guys also do!

  His Blackberry user feeling very precarious specailly passing other manufacturers of mobile because the only reason that is 'Blackberry is security'!

  What is this opinion experts forums or views?

  The response of BlackBerry indicates that this was 'communications' are involved. Depends on communication and used security measures.

  BlackBerry has published white papers on BBM. Those that can be found. I don't know later. E-mail will depend on the employee by the two sender security measures a receiver. Communication on the other has will depend on employee safety by the app. And finally it depends on the operational safety of the users.

  My feeling is that he is a third-party application.

  In any case, Yes, if you have an application that encrypts it's own data on the device or crypt individual files, I see no reason that could not be used in conjunction with encryption devices. I don't know that it adds anything. My there are advantages and disadvantages of encryption of file by file versus encryption of the system, but that's another question.

• Issues of encryption in Windows 7?

  I need to encrypt a folder on my laptop and a drive connected via USB (FAT32). If I encrypt the folder but transfer it to a USB stick, do I have the laptop to open the folder or Windows 7 he deciphers when it transfers?

  If I encrypt a USB FAT32 disc, can I only open and read and modify the files in the same installation of Windows 7 or is it possible to any installation of Windows 7? Can it be read by other operating systems if I get a password?

  FAT32 volumes don't support encryption. You must use NTFS to use the EFS file system.

  Unless you want to use a file encrypted as a file to archive encrypted (rar, zip, etc).

• Is it possible to determine which parts of the runtime of the BCI are required?

  Recently, I added a few .NET controllers to allow me to use c# written by third-party DLLs.

  A few years ago, due a number of reasons, rather that runtime CVI together with our shipping software, we have stripped the small pieces that were needed to make the software run, which kept the overall size of the package down. Given the size of the complete engine (134MB) and the fact that we probably use very little of it, I'm reluctant to add, given the fact that the package occupies only around 10-12 MB.

  I discovered yesterday that the latest version of our software does not work on machines other than my development machine - either're missing us now stuff CVI.

  You might wonder why I do not use the distribution manager to build. In other words, due to the law American that we are prohibited from any form of encryption beyond a certain level as part of a software project we produce, and the installer at the moment entered in this category.

  So that's my dilemma. My questions are...

  (1) is it possible to determine what might be missing by the simple knowledge that the addition of .NET controllers caused the problem.

  (2) if I use the distribution manager to make a working copy of the software, would it not straight to the before enough to then identify what additional things other than my own code, has been added to make the software work and if so where is the installer put it. I have the impression that something gets stuck in Windows\System32, but are there other places too?

  I hope you can help

  Concerning

  Gavin Summers

  You have been really helpful guys... I'm sorted now... The problem arose mainly because I have 9 upgrade to 2010 and then 2010 SP1 for this project. I already had a local copy of the CVI. Reflector.dll in my (9.0.248) project, or something similar, so that was the cause of the problem, but because I just started testing on machines other than my development machine, I haven't noticed so far.

  I went looking for the new copy of this file, when we moved to 2010 SP1, but found no one. I didn't realize he was locked up in the House - I think he could be in the system32 directory before. I have now managed to get a copy from there and when included in the installer, the project is now working on other machines.

  As I said before that the situation is far from the idea, saw out the locks take out the execution engine of the CVI, but because of the way we ship software and due to the restrictions that are imposed by the U.S. Government on issues of encryption, full runtime is now too big to ship with the software , and we cannot use the MSI installer as its encryption level at least at the last valuation was too high.

• Need help with TLS not active Windows 2008 R2 64-bit

  Our companies security vulnerability scanner reports alert status high following for port 443. The system is updated in the plots and we followed this MS doc on how to enable TLS https://technet.microsoft.com/en-us/library/dn786418.aspx#BKMK_SchannelTR_TLS12

  Vulnerability scanner is reporting.

  [top] [443, tcp, www] TLS Version 1.2 protocol not enabled

  V1.2 TLS is not enabled on this port.

  CVE: #

  Summary:

  The service remote crypt communications, but does not have TLS 1.2 active.

  Details:

  TLSv1.2 is not currently enabled on a service that supports SSL/TLS traffic. Due to recent security issues with encrypted protocols, devices and applications owners are requested to ensure that their systems and applications support version 1.2 in the anticipation of future efforts to eliminate the use of TLSv1.0 and v1.1.

  Difficulty:

  Select TLSv1.2.

  Because each application/service handles this differently, please consult product support or documentation staff. In many cases, the product may not yet support v1.2, in which case it is advisable to open a defect/problem with technical support ticket.

  As with most configuration changes, restart the service to ensure that the change to take effect.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• FreeRadius user-password encoding

  Hello

  I'm trying to configure a RADIUS server to authenticate my users on a couple of routers.

  Now, I did my initial configuration on a router in 1811 and everything works correctly, moving to 2801 production router that I get into trouble. Try our second production 2801 it works fine again. I'm breaking my head over what could be bad, but can't find anything!

  What I see in my outputlog FreeRadius:

  rad_recv: package of access request to the host 10.1.1.25:1645, id = 172, length = 96

  Username = 'sander.

  Reply-Message = "" password: ".

  User-Password = "\204p\034\272\345\346K^\250s\346\200gN\035\250".

  NAS-Port = 194

  NAS-Port-Id = "tty194".

  NAS-Port-Type = virtual

  Calling-Station-Id = "10.2.1.112".

  NAS-IP-Address = 10.1.1.25

  (sql) rlm_sql: socket reserving sql id: 3

  Therefore, the GET of the user-password is encrypted somehow by Cisco. The password is 'test' for now. If I connect my two other Cisco routers, I see the password for plaintex in FreeRadius log (as I expect).

  Is there a reason why this 2801 router is acting weird and put a username-password different encoding in the mix?

  The two 2801 running the same version of IOS.

  Help, please!

  Hello

  Single password in encrypted with RADIUS. I would say key

  Kind regards

  Vivek

• mutual authentication failed in the emv card.

  I try to send the STORE_Data command on my EMV card to store values of the IMB. Here, I got a document that describes the APDU command to install and customize the application EMV on JCOP 2.4.1 revision 3.

  Here, in the document, command sequence is similar-

  SELECT
  INITIALIZE UPDATE
  EXTERNAL AUTHENTICATION
  STORE DATA FOR DGI
  ...
  ...
  STORE DATA FOR DGI.
  
  

  Line written in this Document is - "securitythe key value of the issuer field (encryption, MAC and key encryption key): 404142434445464748494a4b4c4d4e4f." and the value of the sequence counter 0

  
  

  I just downloaded GPSHELL 1.4.4 and try to run the following script:-

  mode_211
  enable_trace
  establish_context
  card_connect
  select -AID A000000003000000
  open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
  card_disconnect
  release_context
  
  
  

  and I got the output as:

  D:\users\Amitp\My Documents\Downloads\GPShell-1.4.4\GPShell-1.4.4>GPShell.exe he
  lloInstalll.txt
  mode_211
  enable_trace
  establish_context
  card_connect
  select -AID A000000003000000
  Command --> 00A4040008A000000003000000
  Wrapped command --> 00A4040008A000000003000000
  Response <-- 6F658408A000000003000000A5599F6501FF9F6E06479100783300734A06072A864
  886FC6B01600C060A2A864886FC6B02020101630906072A864886FC6B03640B06092A864886FC6B0
  40215650B06092B8510864864020103660C060A2B060104012A026E01029000
  open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
  f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
  Command --> 80CA006600
  Wrapped command --> 80CA006600
  Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
  886FC6B03640B06092A864886FC6B040215650B06092B8510864864020103660C060A2B060104012
  A026E01029000
  Command --> 8050000008FB3EE9FE0812ABFF00
  Wrapped command --> 8050000008FB3EE9FE0812ABFF00
  Response <-- 0000322000186396921901020000CEBCF3A2D47130C736B6480E4DD59000
  mutual_authentication() returns 0x80302000 (The verification of the card cryptog
  ram failed.)
  
  

  Why is this authentication failed here? To send the command to store I must past this control. any suggestion / idea help me out of this error.

  Thanks in advance...

  I can reproduce the cryptogram of the map with my tool

  KeyDiv	: 00 00 32 20 00 18 63 96 92 19
  KeyInfo	: 01 02

  SequenceCounter: 00 03

  CardChallenge: 70 73 2 c F3 B5 DB

  CardCryptogram: 77 3B 2D 91 35 F6 ED B4

  Last 6 bytes of KEYDATA: 00 18 63 96 92 19

  Entrance to the triple of the 18 ECB:00 63 96 92 19 02 00 18 63 96 92 19 0F 02 F0

  generated kmac: 63 59 D2 9 63 B8 6 b 1 91 68 F4 3 C 4 b 27 F6 AD to

  Last 6 bytes of KEYDATA: 00 18 63 96 92 19

  Entrance to the triple of the 18 ECB:00 63 96 92 19 F0 01 00 18 63 96 92 19 0F 01

  generated kenc: 11 CB 6 b 70 AB E0 5F B1 23 D6 22 88 38 EB 3A E1

  Last 6 bytes of KEYDATA: 00 18 63 96 92 19

  Entrance to the triple of the 18 ECB:00 63 96 92 19 03 00 18 63 96 92 19 03 0F F0

  generated ENCs: 21 DC A5 B4 b 21 17 47 72 02 77 4, 58 F3 EB 6 b 8,

  Session CNTC: 6a B9 66 F2 B2 8F 11 49 31 FE 5F 77 04 0E B4 A5

  Session of the CCMC: C4 F0 42 64 F4 BD 2 8 BEING 52 06 1st FF 1 has 00 4F

  Session RMAC: F7 2 b 72 74 and 74 82 15 6 73 67 05 E6 52 17 B6 E5

  Session ENCS: E3 90 86 E6 F8 8F 58 BB D0 77 A2 0E 0E CF 9 d B2

  Calculated Card Crypto: 77 3B 2D 91 35 F6 ED B4

  Now ext authenticate.

  Cryptogram of the calculated host: FD 89 A6 AB 1 b 6 06 E1

  APDU to wrap: 80 82 01 00 08 FD 89 A6 AB 1 b 6 06 E1

  Your cryptogram of the host is very GOOD, but the MAC is not!

  The cryptogram is done with Kenc

  the MAC is made with Kmac

  Here's how: this method can be used for any APDU after ext authenticate

  block length: 3

  Apdu using updated MAC calculation

  entrance to the SCP02 C - mac calculation: 84 82 01 00 10 FD 89 A6 AB 1 b 6 06 80 00 00 E1

  Ext-AUTH: 84 82 01 00 10 FD 89 A6 AB 1 b 6 06 AC 32 6 a 86 3 a DC C8 DF E1

  I read your message:

  1. -------------------------------
  2. mac session key generation
  3. ------------------------------
  4. KENC: = DES3 (KMC) [00 18 63 96 92 19 02 F0] | DES3 (KMC) [00 18 63 96 92 19 0F 02]
  5. = 6359D29C63B86B1A 9168F43C4B27F6AD

  I agree, the KMAC is correct, even if you named KENC

  At this point, the ICV is zero

  The mac algorithm is MAC final retail (single with final MAC of triples)

  Make sure that you do not mix the key pieces to use for the only part OF THE, here, it should be C4 42 F0 64 F4 BD 2 8.

  Also make sure that you calculated the MAC with the CCMC, not the MAC KEY DERIVED SESSION KEY because I think that you did!

• Import customization parameters

  Hello-

  I'm going through our our 'old' virtualcenter customization settings to our instance of 'new '.  I did the properly for a distinct environment 6 weeks there is, however, I forgot or a step or something is wrong.  In short, I went to the old virutalcenter, export the customization settings .xml file, and installs this file to the new virtualcenter where I imported.  When attempted to deploy a VM model, the Customization screen shows greyed out.  I restarted virtualcenter and still see the same screen.   I know well the issue of "encrypted password", but I don't even see that.  VIrtualCenter is indeed not to recognize the fact that I imported models.

  I hope that I just forgot a step or two - anyone can provide any help would be greatly appreicated.

  Thank you

  Steve

  .. and you have all the sysprep files that are placed in the correct folders on your new server vCenter Server?

• What is Adobe Exchange feature supported on CS5.*?

  Hello!

  I develop a panel of Flex for Photoshop CS5.* and 6 using Creative Suite Extension Builder 2. This version has a new feature called Adobe Exchange that allows extensions to be marketed and sold. If I understand correctly, this feature is only supported on CS6.

  I have a few questions about a zxp approval recommendations.

  [Instructions 1] Content shall not contain any URL or redirect anywhere other than producers identity box links in the extensions Manager.

  [Issue] Means that we cannot have a url to our panel that directs the user to any other than producers identity box in the extension manager?

  [Directives 2] Content does not have encryption technology.

  [Issue] This means that our group cannot in any way have a code for encryption, whether to store values as identifiers, etc.. ?

  [Line 3] The product must support the versions of the Creative Suite CS6 applications. Products that are supported on earlier versions are not accepted.

  [Issue] Does this mean that a panel with the support of CS5.* and CS6 will not be downloaded on Adobe Exchange?

  Please shed some light on the above.

  Thank you!

  Hello

  I answered your questions below.

  I develop a panel of Flex for Photoshop CS5.* and 6 using Creative Suite Extension Builder 2. This version has a new feature called Adobe Exchange that allows extensions to be marketed and sold. If I understand correctly, this feature is only supported on CS6.

  [Answer]: Yes CS6 is necessary, but you can have a product that is backward compatible with products earlier than as CS5 CS6. In other words if you already own a product that supports say CS4/CS5 and CS6, you do not have to do anything outside Strip we just need to have the CS6 compatibility to be supported on the new Adobe Exchange website.

  I have a few questions about a zxp approval recommendations.

  [Instructions 1] Content shall not contain any URL or redirect anywhere other than producers identity box links in the extensions Manager.

  [Issue] Means that we cannot have a url to our panel that directs the user to any other than producers identity box in the extension manager?

  [Answer]: what you can't do is to point to another bank or purchase page. For example, if you could link to additional information about your product, but you could not provide a direct link to another store and purchase option. As long as you do not have a direct link to another URL store we are OK with it.

  [Directives 2] Content does not have encryption technology.

  [Issue] This means that our group cannot in any way have a code for encryption, whether to store values as identifiers, etc.. ?

  [Answer]: the issue of encryption is really on encryptng or the creation of the possibility to encrypt. He returned to the United States want if ensure that we do not export anything that could affect the United States, so for example a product we will encrypt secret information may cause problems for the U.S. Government. There are very few cases that I can think of where it might be the case, but it begs the question from a legal point of view. We expect a cipher for things like for example a login name and that should be OK but if you have questions please say Yes and we can study. 99% of the time, it is not a problem, but we will work with producers to help you if you have any questions or concerns on this subject.

  [Line 3] The product must support the versions of the Creative Suite CS6 applications. Products that are supported on earlier versions are not accepted.

  [Issue] Does this mean that a panel with the support of CS5.* and CS6 will not be downloaded on Adobe Exchange?

  [Answer]: so you can have backward compatibility in your product, just make sure that your product works with S6, if it works with older versions of

  CS is good.

  I hope the above helps.

  Jonathan Ferman. Product Manager

• Authentication Radius Cisco with Windows NAP with encrypted authentication

  I need authentication radius configuration for Cisco IOS devices for device management. My radius server is on Windows 2008 R2.

  Can I implement this with encrypted authentication? In the attached diagram, can what protocol I use for encrypted authentication?

  According to some sites, we need activate authentication in clear text. All those put in place secure as MSCHAP authentication?

  Hello

  You activate the text authentication (PAP) clear. Don't forget Ray sends the username in clear but encrypts the password. You can confirm this take a wireshark capture. You will also get the RADIUS encryption using a key to Ray long and complex.

  If you want to encrypt the user name and password, then you would use GANYMEDE

  Thank you

  John

• Issue of operability of the ACS as RADIUS with ASA 5.0?

  Hello

  I'm trying my VPN to get authenticated user with RADIUS (ACS 5.0). and VPN users database is created in AD. Now when I am trying to connect through the Cisco VPN client, I am unable to do so. Infact, I get an error message (through debugging at the level of the SAA for aaa and isakmp) my RADIUS server is DOWN.

  Please let me know is there any compatibility issue with ACS 5.0 on it because everything was working fine on my version 4.2 of the ACS.

  Concerning

  Ritesh

  Ritesh,

  Yes, there is a lack of ACS 5.0 with vpn authentication.

  When you try to connect with the VPN client. you will not see any hits in the follow-up and the views.
  The ASDM logs: you'll see radius server is not accessible.
  Debugs you show RADIUS period.
  This will work with Ganymede.

  Access policy rule was does not. Also, could not use RADIUS as hit CSCsy17858

  http://cdetsweb-PRD.Cisco.com/apps/goto?identifier=CSCsy17858>; Used Ganymede + instead of RADIUS.

  If you want to use the RADIUS then you need to upgrade your version of acs to 5.1

  You can down load patch 9 (5-0-0-21 - 9.tar.gpg) and ADE-OS (ACS_5.0.0.21_ADE_OS_1.2_upgrade.tar.gpg) from the below path:

  Go to Cisco.com > support > download software > Security > Cisco Secure Access Control System 5.0 > Secure Access Control System Software 5.0.0.21 >

  Reference: update of the CSA since version 5.0 to 5.1:
  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.1/installation/guide/csacs_upg.html

  HTH

  Kind regards

  JK

  The rate of useful messages-

• During the installation of Oracle sector Public Revenue Management Applications, we face "" java.lang.ClassNotFoundException: weblogic.security.Encrypt "issues."

  During the installation of Application Framework via./install.sh script, then that account activity held an entry for "WebLogic Admin User ID system" we face as "' java.lang.ClassNotFoundException: weblogic.security.Encrypt" emits messages. "

  
  

  Please, help us to solve this problem as soon as POSSIBLE.

  
  

  Details of the environment:

  Operating system: 64-bit 5U8 OEL.

  
  

  Follow-up document:

  PSRM - sector Public Revenue Management Oracle Installation Documentation (Doc ID 2067339.1)-PSRM_Installation_Guide_v2_4_0_0_0

  Error message:

  Enter the value to be encrypted: 160122:164014 < criteria > error occurred running /usr/java/jdk1.6.0_45/bin/java-Dweblogic.RootDirectory=/ebiz/app/ouaf/Release-FW-

  V4.2.0.0.0/FW. V4.2.0.0.0/data/product/WLS.splapp weblogic.security.Encrypt:

  Output is Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/security/encryption

  Caused by: java.lang.ClassNotFoundException: weblogic.security.Encrypt

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)

  The main class is not found: weblogic.security.Encrypt.  Program ends.

  End of output

  The program finished in line 118 of the data/bin/perllib/SPL/splLog.pm.

  Error: install.plx has not completed successfully. On the way out.

  From now on, we have completed the slot status of activities for your reference.

  Sl.No	Name of the activity	Status
  1	Create users and groups

  Completed

  2

  Install prerequisite software

  Completed

  3

  Oracle 11.2.0.3 database

  Completed

  4

  Java 6

  Completed

  5

  Oracle WebLogic 10.3.6

  Completed

  6

  Hibernation 4.1.0

  Completed

  7

  Micro Focus Server 5.1 WrapPack 8

  Completed

  8

  Install Oracle Utilities application.

  Here issue facing

  9

  Install Oracle Utilities Application Framework Service Pack 1.

  Pending

  10

  Install Oracle Public Revenue Management sector

  Pending

  11

  Deploy Oracle sector Public Revenue Management application

  Pending

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  Concerning

  Knani G

  Hello

  During the installation, we have wrongly given Home Directory Web Application Server like/Ebiz/app/woof/Middleware

  So we changed the Homepage Directory Web Application Server as /ebiz/app/ouaf/Middleware/wlserver_10.3

  then the problem is resolved.

  Thanks for the support.

  Concerning

  Villi Kumar

• RADIUS key encryption?

  On N-series switches, the key to Ray is, by default, displayed in clear text in the configuration file.

  There is a CLI option to specify an encrypted value, but he says that the length of the parameter must be exactly 256 characters. The CLI documentation specifies nor on the type of encryption or how before you encrypt the password.

  I tried "SHA256-ing" my key, but it generates only 64 hex (256-bit). When it says 256 characters, I guess that means 256 hex (i.e. 1024 bits)?  I don't know how to generate this value of my key... no guidance?

  Thank you!

  It's something that we need to get out a new version of firmware to solve. So for now unencrypted is the only option.

• BlackBerry 10 BB RC4 128 bit encryption browser security issues

  When you check Browserspy from your BlackBerry browser this link:

  http://BrowserSpy.dk/

  Then select 'Security' in the list

  Then select "SSL Encryption Check"

  For my Z30 I get RC4 128 bits (see photo).

  I also get the same results by using this test:

  https://www.fortify.NET/

  We're worried for RC4 128 bit security to the extent wherever Microsoft has recommended not using it.  See these two links:

  http://en.Wikipedia.org/wiki/RC4

  http://TechNet.Microsoft.com/en-us/library/cc179125.aspx

  I don't have any device to connect to the Internet with RC4 128 bit.

  Is there a way to change the encryption level or the order for the BlackBerry browser?

  (Just as a side - note because BlackBerry uses WebKit for browser (Apple uses WebKit) pick up a lot of sites Tester browser like Safari.) I woder if browser test to determine the market share does not report some of the Blackberry as Apple because of this "confusion".)

  

  This problem has been fixed in the new release - Version of 10.3.1.1581 software

  Now the two browser the personal side and (if you have activated BlackBerry Balance) the browser side work to connect using AES 256.

  Thanks BlackBerry!