FreeRadius user-password encoding

Similar Questions

• AFP://user: password@server + connect as?

  Hello

  before you move on to Sierra, to connect to my NAS, under Finder-> go-> connect to server, I used to type:

  AFP://user: password@server/share_name

  with no pop-up windows ' connect as '.

  Now, after the upgrade, after the command: afp://user: password@server, a "connect as" windows appears and it's annoying.

  Someone knows how to jump this window "connect as"?

  Thank you

  Daniele

  I think it has something to do with SMB being now the default connection for Sierra. I tried the syntax shown you and replaced "afp" with "smb", but still have the screen connect as . Even when you select the server in the left pane of the Finder, I always have to make a sign in as. It is used to remember how I connected and go immediately to the actions on the server, but no more. Always have to connect as.

• circumvention of disapproval of length - Network.http.phishy.User - password?

  I need a PC unattended to connect to a Web page with basic authentication when the PC starts (for example power restored). I used to be able to get Firefox to start with the homepage with URL (https), including the username/password. Unfortunately, in last PC Restore, I forgot to turn off the automatic updates of Firefox new version has deprecated the length - network.http.phishy.user - password so stops the PC connection with popup that is the BIG problem on PC without supervision. No work around for this nice novelty? Thank you.

  Allow us only Google threads index marked RESOLVED, so that the power is in your hands.

  (Also, I noticed some people add strange unique strings of text to their positions so that they find them more easily in the future.)

• Satellite A100 is locked because of the fingerprint BIOS & user password

  Hi all

  I have my A100 to my work, recognition of the TouchChip fingerprint a year ago. On initial installation, I recorded my fingerprint of the windows interface.
  Six months ago I had to reinstall windows XP due to infection by the virus that is not repairable. I have installed Windows XP Home edition and downloaded all the drivers and additional software from Toshiba's site.

  I him didn't record again my fingerprints, and I have NOT activated the TouchChip software this time. My problem was only an annoying message at the time the sign that said «you have not saved your fingerprint again...» "and that's it.
  After a 2 week out of town trip (My A100 was locked in my office, and powered OFF - no connection to the sector) at first start, software TouchChip is back from the dead!

  Screen 'TouchChip Bios Extension' appeared after plugging, and my finger is required to load WXP!
  When connecting user WXP dialogue the additional message "you have not saved your fingerprint again... is always here, but I cannot start the machine without my fingerprint." After some digging later in PowerProtector (?) I found an option that says 'enable or disable the use of fingerprints for system and user password BIOS' or something like that.

  I turn this off, and the machine asked to reboot. It was the last time I saw the office.
  After reboot, the system asks password. BUT I DID NOT PUT ANY SYSTEM OR USER PASSWORD!
  Is this possible?
  I did something wrong?
  What is the solution?
  I'm locked out; I don't know why and how the BIOS is locked with a password (so I can't unlock it).
  Please someone help.

  Best regards, Georgios

  I don't know what exactly A100 computer laptop you have, but it seems that the laptop came with the Vista operating system preinstalled.

  You have installed XP and drivers XP only from the Toshiba page.
  But from my understanding, the BIOS should be updated too! The Satellite A100 series supports a special XP BIOS version. If the BIOS was not updated the laptop might not run correctly.

  I don't know if it could have a negative influence on the fingerprint, but nothing is impossible!
  However, the fact is that the BIOS asks for the password. If you don't know this, you need to remove the other... and this can be done by a service provider authorized in your country.

  Request assistance from technicians and explain the whole story! Maybe they will remove the password for free!

  Bye and good luck

• Satellite M70-129: user password controls access to the system at boot

  Hello

  1. from Toshiba Assist (password utility) I put the supervisor with string (text boards) owner password and then I put the user with chain owner password. But during startup BIOS only prompt you for the user password and his Rosary of owner. User mode many BIOS options are disable including the HW installation option.

  2. when I click on Toshiba HWSetup, he invites supervisor password. But if I get the supervisor (not 100% sure) password, it says invalid password. I also tried to change the Toshiba supervisor password, password help utility but failed.

  3. in the meantime due to virus attack, I had to reformat my laptop with Toshiba Recovery CD, sacrifice all my data. I bought this laptop in a few months.

  4. How can I completely remove the BIOS supervisor password and user. Help, please.

  Hello Anas

  You are right. If there is no possibility to remove the password, the service partner for this but it costs a bit.

  Otherwise I put t agree with you on the common problem on Satellite models, because it is a very serious thing and I really t think Toshiba may allow something like that to happen. If it's truth can you imagine what turbulence will be on the market, or perhaps to the press. I put t really believe in this theory.

• Portege R500 - no response from user password

  Having just taken delivery of a new Portege R500, I tried to make a bluetooth connection when a screen came and asked to set up an administrator and user password. I have set up the password of the user only, typing in only once (but did not arise to confirm). When I turned on the computer again, there was a request for password in the upper right corner. But when I typed in it, nothing happens outside of the computer go after 3 attempts.

  It's the password but I've noticed that when I was putting the origin of the series of * only appeared with the second letter. Is there a simple solution or do I return to the dealers? I have no data on it have only added programs to date.

  Thanks for any advice.

  If there is nothing especially on the HARD drive, I recommend you use the recovery image and make the clean OS install. After doing this there's second chance to establish a Bluetooth connection.

• Satellite Pro L10: How to remove the user password

  Hello

  I work for a school and we have a bunch of laptops Satellite Pro L10. I put a supervisor on all laptops password think this problem would be solved (I didn't enter a password each time the machines are enabled), but one of our students seems to have found its way to the HWSetup utility in Control Panel and could save a user password on one of the laptops.

  Alarmingly there seems to be no way to clear the password of the user, even though I have the supervisor password. I can get the BIOS as a supervisor, but the definition of a user password option is grayed out. Can anyone provide a solution for my problem?

  Thank you

  Hello

  Well, I think that this problem could be solved by updating the BIOS to the version 2.60 or greater.
  But the problem is that the password has already been fixed.

  I read in the paper of Toshiba that all passwords must be removed before starting the BIOS updates.
  That's why I think it would be advisable to contact Toshiba service partner to remove first the user password, and then update the BIOS.

  You know it's very risky to update the BIOS of the device when the user or any password has been set.
  It of possible that the BIOS update procedure will be interrupted if the password exists.

• Satellite L50 - how to reset the user password?

  Hello

  How can I reset user password on a brand new L50 satellite laptop?
  I just got a password hint 'we now' If this is useful.

  I do not have a cod on USB because it asks me to

  What about the g2

  I assume you mean on the BIOS password. Right?
  Just to confirm that, please switch on the device and press the F2 key.

  If BIOS password has been configured you should NOT be able to access the BIOS...
  In this case, you will need contact the maintainer authorized Toshiba in your country in order to remove the password...

  Common laptop user is not able to remove unknown BIOS password.

• Qosmio x 300 15 t drive hard master wrong password, but know the user password

  I don't know if it's in the right forum, but I have a problem with my internal hard drive. I put a main HARD drive password and user password using the BIOS HARD drive. Some time later I discovered I have to tapping the bad HARD drive a master twice on the confirmation, as it is coming from wrong when I try to remove it! I can still access the floppy using the password 'user HDD' both within the laptop, but a HARD one master drive value, I can't remove the locks. This means that I can't get out my drive and put it in a USB caddy or access it from another PC or laptop. I backed up all that is on it, so data loss is not a concern, but is it possible to remove the password if you know the password? I don't want to use this drive in my laptop, and then my laptop if effrondrent on me that the hard drive is basically locked on this laptop unless I find a way to get rid of the master password - that would mean the loss of data in the future to come if the laptop is dead!
  The drive is a TOSHIBA MK1059GSM with firmware 50IDF3DMS (I post the serial number). I would just buy a new drive, but as it is a 1000 GB, and they are expensive, I would find a means to correct the password to disk than to spend the money a brand-new car. Like I said, data loss is not a concern, I just want to go to a fully usable state!
  If anyone knows a solution, please let me know!

  Thank you very much for this useful information, samspin!

  I saved this thread in my bookmarks :)

• Laptop HP 2000: user password screen forgot lock

  I forgot the user password screen on laptop from HP running windows 2000 8, just after the adjustment for the first time.  There is no option to log in as administrator (only the personal user appears).  There is no personal data / files on the PC.  Need instructions step by step to retrieve or reset the password.  OR another option would be to default factory reset and start again, but once again need directions to do so.

  Hi there @cgoslin,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you forgot the password to connect to your laptop HP 2000.

  Please follow all the instructions in the document what to do when you forgot your password to login (Windows 8) .

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• Modification of user passwords / privileges via API

  I work with the API user in a custom user Manager utility to perform all the basic operations of an admin of luminaire (create, modify, delete).

  Above all, the tool is very simple, but I'm looking to see if anyone else has experienced two elements that are irking me that exist as features of the Engine.EditUserDialog () method.

  When you change an existing via the existing method of TS user, you can change the password & privileges without headaches.  However when you use the raw API none of these simple tasks seem trivial.

  (1) when 'I' User.Password, the chain is (naturally) scrambled to prevent casual snooping.  In my view as dialog box * anyway, so not done wrong. However, TS doesn't seem to know if it is powered by the chain on the side 'set' of the equation is already coded and based on my tests, seems to be scrambling twice if no change is made to this field.  Is it possible to implement User.Password which will _not_ force a "scramble"?  (in case I want to put the password to the value it was already?)

  Normally, I would just omit the 'set' action if I didn't change the value. But because of other circumstances (see below), I don't have that luxury this time.

  (2) in the API User.Privileges is a property read-only even for administrators.  Is there a work around for this for when an administrator wants to upgrade/downgrade a user access?  It seems to me that the achievable only thing to do is copy the info from the old user object, destroy it and make the new user with the correct privilege container object.  Adjust assignments of UserGroupList is pretty easy, but there is no way to modify an existing user privileges...

  Curious!

  Hi Elaine,.

  I think you just need to modify the members of a particular group.

  That you have defined a new user Joe Brown as a technician but later, you will need to change to be an operator.

  All you do is remove a GroupUser technician members and add operator GroupUser members. You need not resubmit the password.

  Get a reference to Engine.UserGroup ("technician")

  with this reference, get a picture of the User.Members

  Find out where the user is in the table and remove this item

  close the reference User.Members

  Get a reference to Engine.UserGroup ("operator")

  with this reference, get a picture of the User.Members

  Add Joe Brown at the members table.

  close the reference User.Members

  Joe Brown will now be an operator and you do not have to change its coordinates.

  I noticed that by using the User Manager to see the changes that I could see that Joe Brown had changed groups and it has been removed from a group, but it has not been shown in the new group.saving the user changes and disconnect and connect again the changes where now seen.

  Then maybe you need to validate the user to the new group.

  See if that helps

  Concerning

  Ray Farmer

• Forgotten user password

  Start-up of a 7 year old Dell with Windows XP desktop, but I don't remember my user password. How can I get around this?

  Start-up of a 7 year old Dell with Windows XP desktop, but I don't remember my user password. How can I get around this?

  Keep passwords secure - Microsoft on passwords strategy
  http://support.Microsoft.com/kb/189126

  What to do if you forget your Windows password:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

• bought a used hp, Cann't get xp to open, do not know user password, how do I remove this

  It's a model hp 6643, bought used with wind 98, installed xp and now it asks user password that I don't know before he will go further

  Hi Leon,

  You can try the following steps and check if it helps.

  Method 1:

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  Method 2:

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  Also, check out the following links:

  Microsoft's strategy concerning lost or forgotten passwords

  Keep secure passwords - Microsoft strategy on move the passwords

• [T410] FDE - user password insufficient to erase disk (master required?)

  Hello community,

  before all sorry for my bad English skills. I have a problem with my drive hard-encryption:

  For about 1.5 years, I encrypted my hard drive with a user-password (FDE). Now, I plan to replace the hard drive and use the external old as a usb device. So I want to erase the entire disc + password. I tried the "Drive erase Utility" Lenovo, but it requires a master-password. I don't know it

  With my user password I can modify the BIOS settings, format the drive and reinstall a new operating system, I can even change the user password. But I can't remove the password / encryption.

  My question: is it possible to remove the password from the drive (FDE) only with the password? (Even if a password has been set?)

  Thank you

  Hello, roderwald.

  Pages 40 to 42 of your Hardware Maintenance Manual describe the passwords of the BIOS, including the differences between the master password and the user HARD drive.

  Further discussion is not allowed by Community rules:

  "No post includes instructions or directives intended to subvert security measures, including passwords, locking mechanisms, analysis of fingerprints, etc., or to circumvent security measures. All messages provides descriptions of the location, or direct links to the content associated with these topics. »

  I'm sorry, but I have to lock this thread.

• IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Original title: IBM think centre @ start request.

  IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Hi brandon1980,

  I recommend you contact your computer manufacturer for assistance. The manufacturer would be able to give details about the BIOS (Basic Input Output System) and find out if this feature can be disabled.

  Hope the helps of information.