issue of engine/table of measures
I do I'm sure that there is a mistake that is easily corrected. I'll make a motor of action where I need to add to a table of the elements and after that the table is full, throw away old data and add new data. If someone can tell me why this table continues to be all zeros, I would be happy. Probably a misuse or misunderstanding of one of the array functions. If someone could put a picture of the VI corrected rather than tie the real VI it I would appreciate it that I won't be on a computer with Labview until Monday. Thank you.
One problem, it's that you insert in a position that keeps incrementing with each round trip. So, you have a table of 15 items, but eventually insert in position 16, 17, 18... These are positions that are not defined. If you do something where you insert the new element at the top of the table, then you must always insert in position 0. If you are still wanting to put at the end, you add at the end of the table and take a subset of the table of index 1 for the length of 15.
The real problem, that we never see anything other than zeros, it is that the wire goes into the shift register to the right is the same one that comes out of the left. Changes that you make by inserting into the table and taking the subset disappear with each iteration of the action engine and never reach the table indicator
Tags: NI Software
Similar Questions
-
Issue using the ENGINE table MEMORY SUNOPSIS (high priority)
Hi gurus,
It is to launch an operator, like any error by using the SUNOPSIS MEMORY ENGINE to generate a .csv file using the database as a source table.
ODI-1228: SrcSet0 (load) task fails on the target connection SUNOPSIS ENGINE table SUNOPSIS MEMORY ENGINE.
Caused by: java.sql.SQLException: unknown token
(LKM used: LKM Sql to Sql.)
IKM used: IKM Sql to add files.)
can you please help me about this ASAP so that it became a show-stopper for me to go further.
Any help will be greatly appreciated.
Thank you very much
Pavan
Published by: Pavan. on July 11, 2012 10:22Hi all
The issue has been resolved successfully.
The solution is
We need to change the E$ _, I have$ _, J$ _,... E_, I_ , J_... ((c'est à dire, enlever le symbole '$')) in the PHYSICAL SCHEMA of ENGINE table SUNOPSIS MEMORY according to the information provided below.When interfaces running and using an XML schema or file complex as the transit area, the 'Unknown token' error. This error is caused by the HSQL (2.0) updated version. This new version of HSQL requires that the names of tables that contains a dollar sign ($) are enclosed in quotes. Temporary tables (loading, integration, etc.) that are created by the knowledge Modules do not respect this requirement on the technologies of complex and HSQL records.
To work around the problem, change the physical schema definitions to remove the dollar symbol ($) of all paintings of prefixes work. Scenarios must be regenerated with these new settings.
It has worked well for me.
Thank you
Pounet -
I want to know when we issue statement truncate table in oracle.
I want to know when we issue statement truncate table in oracle. No newspaper will be write in the redo log. But we can recover data using flashback or SNA. I want to know where the actually truncate table statement log is stored in the oracle database. Please explain to me in detail step by step.>
I understand your SNA. But I want to know where the truncate statement stored log. But in the redo log, no entry for truncate.but I want to go which connect there is no market value back...
>
If you are still wondering after getting the answer so you don't "understand".You have received the reply above. Archive of flashback stores data.
See the link provided above to CREATE an ARCHIVE of FLASHBACK in the doc of SQL language
http://docs.Oracle.com/CD/E11882_01/server.112/e26088/statements_5010.htm
>
TABLESPACE clauseSpecify the table space where the data archived for this flashback data archive referring to be stored. You can specify that a tablespace with this clause. However, you can then add tablespaces to archive flashback with a statement ALTER FLASHBACK ARCHIVE database.
>
The data is moved to storage of archives and restored from there when you query for archive flashback. -
How to build a table of measured data permanently
Have a good day for everyone,
I have a problem about the construction of a table permanently. I tried to find the solution for a long time, even if it's a task really simle.
I want to build a table permanently, virtually:
I like to read data from a measuring devices and I would like to sotre it one by one, at all times. I made a simple VI to present one where my problem is. The random generator represents the data given the measuring device.
At currently I am able to store data only 1. When I want to store then that it is crushed.
Thanks for anyone who can help me.
Hi LIG.
no need for a structure business when you can use autoindexing:
Also, the code snippet shows how to convert a number in your reading string. You probably prefer tanks instead of integers...
-
use of crypto engine - how to measure?
Hello
I'm looking for a command or another way to measure the CPU usage in a card crypto engine?
Is it possible to check how the vpn tunnels crypto engine effect processor traffic? Why I need? For example if I had 100 tunnels with certain characteristics of traffic, I need to know if I can add new tunnels it or I need to buy a new router to put an end to any new added VPN.
SNMP OID? command?
I tried to find something, in reference to the command, but without success.
concerning
Przemek
Przemek,
I am afarid the answer still will not be uniform :-)
In your case, you run embedded cryptographic engine (or at least what I remember of NETGX).
IKE sessions will be processed by the processor and only IPSec flows processed by the encryption engine.
More than sessions IKE - more stress on the control plan. That is to say that the CPU high can still affect even if engine cryptographic tunnels is relatively inactive.
You might get some indication at the beginning of 'show crypto isakmp stat' but actual counters to monitor will depend on your configuration.
There is also a finite number of sessions can be sent to the crypto engine.
From a realistic point of view, you should follow the sheets (marketing) insofar as the scaling of goes.
Marcin
-
Issues of conversion table: element
For example, in a table of conversion (FM12) an element must contain what might be in there? For example:
Question has)
E:head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor | E:section [S2]) * in the Section [S1] element.
In other words, included it 1 or more E:Section [S2] can itself contain an E:Section [S3], but the [S1] Section would not just outside the Section [S2]. So, should I include E:Section [S3] within the definition of Section [S1]?
==========
Issue B)
Also, I don't get specified TEXT anywhere in the samples, I look. TEXT must be in my conversion table?
Am I right that I should add my lists to the right, if I want lists to be valid in the Sections?
==========
Question C)
In addition, I understand that the following specifices 0 or more of the content items: E:Head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor | E:section [S2]) * in the Section [S1] item.
However, the reality is for E:Secton [S2] there must be two or more none (there can be only one). Then, the following text describes what I just said?
E:head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor | (E:Section [S2],E:Section[S2]+)) *
Thank you
Sean
Sean,
This can be complicated to address with simplicity (like language), but I'll take a shot at him.
-------------------------------------------------------------------------------
Question has)
E:head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor | E:section [S2]) * in the Section [S1] element.
In other words, included it 1 or more E:Section [S2] can itself contain an E:Section [S3], but the [S1] Section would not just outside the Section [S2]. So, should I include E:Section [S3] within the definition of Section [S1]?
RW: No. each rule as this specifies the child direct candidates only. You would have a separate line in your table in the Section [S2}, which indicates its respective candidates children (a which Section [S3].)] Similarly, Section [S3] would have its own line, etc.
----------------------------------------------------------------------------------
Issue B)
Also, I don't get specified TEXT anywhere in the samples, I look. TEXT must be in my conversion table?
Am I right that I should add my lists to the right, if I want lists to be valid in the Sections?
RW: no, by nature, a text node is locked to his current position, as a child of its current parent. Everywhere where parents who will, the child text node needs to go also. So no choice in the matter. Of course, however, the general rule in your EDD must allow text as long as it is necessary to maintain the validity.
Another explanation, imagine how a text node is displayed... usually by wrapping text in a component of character Beach, where there is additional text before and/or after the inside of the paragraph. The conversion table normally does this skin based on the character formats, then text nodes are just there and fixed.
-------------------------------------------------------------------------------
Question C)
In addition, I understand that the following specifices 0 or more of the content items: E:Head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor | E:section [S2]) * in the Section [S1] element.
However, the reality is for E:Secton [S2] there must be two or more none (there can be only one). Then, the following text describes what I just said?
E:head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor | (E:Section[S2],E:Section[S2]+)) *
RW: The logic seems wrong to me. I don't know exactly what your EDD or source file looks like this, but I think more in the sense of something like:
E:head [H1], p +, (p | ul | ol |) GRAPHIC | Table | Anchor) *, article [S2], article [S2] +.
Otherwise, you might get more
- , etc. after the sections. While we are on this issue, let me throw out some thoughts...
-You must decide if you try to apply strictly the structural rules here or simply to get the optimal structure applied. As a general rule, a rule of conversion table can be more lenient, so it may capture abnormalities that can be cleared up later using the validation of ESD. You come with additional consideration of another agreement, that an article must begin with a
I would usually use a simpler rule, such as:
E:head [H1], (p | ul | ol |) GRAPHIC | Table | Anchor) *, Section [S2] *.
It is perhaps more lenient than the structure that you intend to apply in your documents. But it is much more likely to get your most feasible initial structure from the beginning. During the cleanup after conversion, it is easier to correct a little lost
elements only to the rearrange a bunch of hierarchies section, everything simply because you were looking for perfection in the first passage.
-Once again, although not knowing your EDD, this jumps at me... by putting GRAPHICS, table and anchor in a single rule, this means they must be brothers and sisters. However, from previous conversations, I'm suspicious that they are not. In other words, I suspect that the anchor can be one parent to the other two. If so, this rule should be anchor only and it should be separate rules to push the GRAPHICS elements and table under anchor, then this rule simply has to pull on the anchor and children.
-------------------------------------------------------------------------------
I hope this helps!
Russ
-
Entering text on the issue of the Table
Hello
I have a table which I configured, which basically displays the history of changes to a particular object. I would only like the first line on the table to have an 'editable' text and the rest of the lines to have the text of entry in read-only or disabled. Is this possible? If so, can someone guide me on how to do this?
Thank you
JoelJoel,
Your af:table is based on ADF business components? Is it possible for a specific line (not knowing anything on any other lines) of whether it should be editable or not? If so, you can override isAttributeUpdatable on your VO or EO to return true or false depending on whether the line should be updatabale
John
-
issue update a table using a function in pipeline
OK, I have an example simplified below what is happeningBANNER Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi PL/SQL Release 10.2.0.4.0 - Production CORE 10.2.0.4.0 Production TNS for HPUX: Version 10.2.0.4.0 - Production NLSRTL Version 10.2.0.4.0 - Production
I try to make updates or inserts in the tables and I use a function pipeline for this bed of the same tables of the to do.
and it gives me
My solution was to do a slider and update record row by row, but I was wondering if there is a way around this error?ORA-04091: table DSAMSTRC.T is mutating, trigger/function may not see it ORA-06512: at "DSAMSTRC.GET_T_ARRAY", line 6
Here's my example
DROP TABLE t; ------------------------------------------------------------------------------------ CREATE TABLE t AS SELECT LEVEL id, 'A' txt FROM DUAL CONNECT BY LEVEL <= 10; ------------------------------------------------------------------------------------- CREATE OR REPLACE TYPE t_table_type AS OBJECT (id NUMBER, txt VARCHAR2 (200)); ------------------------------------------------------------------------------------ CREATE OR REPLACE TYPE t_array AS TABLE OF t_table_type; ----------------------------------------------------------------------------------- CREATE OR REPLACE FUNCTION get_t_array (v_txt IN t.txt%TYPE) RETURN t_array PIPELINED IS BEGIN FOR EACH IN (SELECT id, txt FROM t WHERE t.txt = v_txt) LOOP PIPE ROW (t_table_type (EACH.id, EACH.txt)); END LOOP; RETURN; END; --------------------------------------------------------------------------------------- UPDATE t SET txt = 'B' WHERE id IN (SELECT id FROM TABLE (get_t_array ('A')));
You can create a global temporary table that has the same columns that use your function to insert in there, and then use it to update t.
CREATE GLOBAL TEMPORARY TABLE t_temp (id INTEGER, txt VARCHAR2(100)) ON COMMIT DELETE ROWS; INSERT INTO t_temp (SELECT id, txt FROM get_t_array('A')); UPDATE t SET t.txt = (SELECT txt FROM t_temp WHERE t_temp.id = t.id) WHERE t.id IN (SELECT id FROM t_temp);
-
Third issue of page table of contents
Our table of contents entries look like this:
Chapter 1 Introduction... 1 1
HOWEVER, if the table of contents goes beyond the second page, they lose the points of the leader:
Chapter 99 Florbling 99 Grömitz - 1
(No, we don't really have 99 chapters!)
In my ignorance, I don't know how to solve this problem. In their (probably smaller) ignorance, nor do my frame internal 'experts '. I wandered around menus and help without making any progress.
I'm under 8.0p266, unstructured.
Thanks in advance for any idea!
How to debug this?
Provide more details.
What is available to columns (number, Gap, margins, is side heads active)?
What is the specification of tab stop for the xyzzyTOC formats that do not reach right?
I've seen problems when the tab stop is set to 'exactly' the width of the column. It is a particular problem that you declare directly a CW. It is calculated the size of the page margins to one side and the gap. Rounding and accuracy problems can cause the effective CW to be slightly smaller than you think it is.
I usually put the stop to 0.01 inch lower in xyzzyTOC formats.
You can try using a smaller tab stop and see if the points appear as if by magic.
-
Hi all
I have a question of a result like this:
Select the year
Sum (Item1) like item1,
Sum (item2) as item2,
Sum (Item3) as item3
orders
Group by year
My result is
YEAR, ITEM1, ITEM2, ITEM3
---------------------------------------
2008, 4, 2, 5
2009, 3, 1, 0
2010, 3, 7, 8
I want to view my report like this:
POINTS, 2008, 2009, 2010
------------------------------------
ITEM1, 3, 4, 3
ITEM2, 2, 1, 7
ITEM3, 5, 0, 8
I use version 11g
Can I use PivotTable?
How can I do this?
Thank you!
Johnny
Published by: user9542267 on June 7, 2010 12:44Hello
Comment of Marias applies to your message revised as well as the original message.
From Oracle 11.1, you can use the PIVOT and UNPIVOT features.
As you post CREATE TABLE and INSERT statements for your table, I will illustrate using the wscott.emp table.
A simple query GROUP BY:SELECT job , SUM (comm) AS sum_comm , SUM (deptno) AS sum_dptno , SUM (sal) AS sum_sal FROM scott.emp WHERE job IN ('ANALYST', 'CLERK', 'SALESMAN') GROUP BY job ORDER BY job ;
produces this output:
JOB SUM_COMM SUM_DPTNO SUM_SAL --------- ---------- ---------- ---------- ANALYST 40 6000 CLERK 80 4150 SALESMAN 2200 120 5600
To transpose the output in this format:
COL_NAME ANALYST CLERK SALESMAN -------- ---------- ---------- ---------- COMM 2200 DEPTNO 40 80 120 SAL 6000 4150 5600
You can do this:
SELECT col_name , SUM ("'ANALYST'") AS analyst , SUM ("'CLERK'") AS clerk , SUM ("'SALESMAN'") AS salesman FROM scott.emp UNPIVOT (num FOR col_name IN (sal, comm, deptno)) PIVOT (SUM (num) FOR job IN ( 'ANALYST', 'CLERK', 'SALESMAN')) GROUP BY col_name ORDER BY col_name ;
-
The issue of external Table...
Hello world
I am new to working on 'EXTERNAL TABLES'. Is it possible to add another column (what is not
in the flat file) with a "default"?
I'm just trying to create a simple TABLE 'EXTERNAL '...
question 1
==========
EX: === Flat file that i get will be like this (sample) ENG,England,English SCO,Scotland,English IRE,Ireland,English WAL,Wales,Welsh If i create a external table like the following everyting would be fine.. CREATE TABLE countries_ext ( country_code VARCHAR2(5), country_name VARCHAR2(50), country_language VARCHAR2(50) ) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY ext_tables ACCESS PARAMETERS ( RECORDS DELIMITED BY NEWLINE FIELDS TERMINATED BY ',' MISSING FIELD VALUES ARE NULL ( country_code CHAR(5), country_name CHAR(50), country_language CHAR(50) ) ) LOCATION ('Countries1.txt','Countries2.txt') ) PARALLEL 5 REJECT LIMIT UNLIMITED; but i need another column with a "default value" "N" which is not in flat file CREATE TABLE countries_ext ( country_code VARCHAR2(5), country_name VARCHAR2(50), country_language VARCHAR2(50) ) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY ext_tables ACCESS PARAMETERS ( RECORDS DELIMITED BY NEWLINE FIELDS TERMINATED BY ',' MISSING FIELD VALUES ARE NULL ( country_code CHAR(5), country_name CHAR(50), country_language CHAR(50) --, -- Valid_flag default value "N" Is it possible to add this column while creating the external table? this column is not there in the flat file. ) ) LOCATION ('Countries1.txt','Countries2.txt') ) PARALLEL 5 REJECT LIMIT UNLIMITED;
Sorry if this topic discussed somewhere in the forum.quetion2 ======== LOCATION ('Countries1.txt','Countries2.txt') I have multiple files (around 150) which are in the same format. Do i have to mention all the file names in the location clause? if i have to create a table on those 150 file? Ex LOCATION ('Countries1.txt','Countries2.txt','Countries3.txt','Countries4.txt','Countries5.txt','Countries6.txt','Countries7.txt','Countries8.txt', and so on....) or Is it possible to put (countries*.txt)?
Thank you
PhaniThe external table requires the exact name of the file, it does not accept wildcards. If filenames are stable, just take the hit and list them all in the LOCATION once. If the file names are fungible Pretreat then screwed by them cutting in a single file, which is the only name in the LOCATION clause.
Cheers, APC
blog: http://radiofreetooting.blogspot.com
-
issue with tables and clusters
Hello
Another issue with the tables and clusters. I have three engines thatI move on XYZ and then measure something. I need to draw on the 3D, the result of the measurement. How to draw real XYZ and not the index of the data table positions? (I can't actully how to build the matrices 2D forX, Y and Z). In the figures, I give an example of what I need.
Concerning
You have to break the data out of the cluster and to present them to the graph 3d to a separate bays for X, Y, Z and W where 'W' is your values measured at the locations described by X, Y, Z.
This thread shows how trace readings in space 3. The following image shows the data that the original author wanted to draw.
Have fun
Ben
-
How to convert the string with numbers in the table of Boolean 2D
Hello
I have input a string with comma separated numbers 1,192 (starting at 1).
This string must be converted to a table 2D-boolean. Each number that appears should be true, not true rest.
The 2D table consists of 4 times of 0.47 Boolean values.
1.48--> [0.47] numbers [0]
49.96--> [0.47] numbers [1]
Numbers 97.144--> [0.47] [2]
145.192--> [0.47] numbers [3]If a '1, 49, 97 145' input string put all [0] [0.3] true.
How can it be easy/fast resolved?
Thanks for help
Break the string of numbers in a table of numbers. (Spreasheet String to Array).
In a loop For, index with each issue of this table. Use in the range and Coerce to see if it is in the range of numbers. (You can put this in a loop For as auto good indexing through the ranges). If it's in the range, then use subset replace table to activate the corresponding item in a real. If this is not the case, do nothing. Maintain the table of Boolean in a shift register.
Repeat this step for each number in your table.
(What is a class assignment?)
-
Scan engine access on CRIO protection?
I'm running a production Tester high volume using the CRIO in a car factory, and my application uses the analytical engine. I fell right on s analysis vi engine in the measures of e/s palette that allows you to target a CRIO and alter the scan engine. Although very convenient, it seems that it is a very dangerous thing to leave unprotected or some kind of user access rights.
Can password - protect the scan engine settings changes to avoid this kind of change? Locking of the CRIO accomplishes this?
Thank you
Rob
Hi Rob,
I found a better way to protect the cRIO. In your project, right-click on your controller for cRIO, and go to properties. In the properties on the left side menu, you will see a list of Catergories. If you click on the user access, you can allow and deny access to certain IP addresses. Now, only the IP addresses in the list of the grant will be able to connect to the cRIO (and if you can not connect, you can not deploy any code). I tried this and I accidentally the cRIO locked out. If you never lock yourself out, you need to modify the nor - rt.ini, located on the RT controller. Because you can change the access to this file as well, you want to password protect the Max cRIO thus so that this file cannot be changed.
Thank you
-
Formula with coefficient table node
Hello everyone!
First of all, I want to thank you all from this forum because it helps me a lot with the question, thank you!
And now my doubt...
I have a table of measured values, and I need to use it in a formula to convert measures voltage, temperature.
In this equation, I have coefficients I wanted to extract a table or a matrix.
Try to solve this. I converted the table into a cluster and send formula node inside a loop for.
Before I inserted the cluster and wrote the coefficients manually, the program worked, but now it doesn't
I made the program run with the "lamp" and noted that, in my loop for example, the 'I' does not increase... Any suggestions?
Thanks for the help.
Leandro
Ok. I'm kind again in LV
I did not know the index and it influences in the loop for, thank you, it helped me a lot. I don t know how to use the commands that you said, but I found an alternative. Maybe (and I'm sure) that it's not the best, but it works. If you gak, or anyone who reads this has another idea, post it here. I am interested to know.
After that I'll take a look in these commands, you said to learn more on this subject.
Thank you very much
Leandro V. Zaccarias
MEF-UNICAMP
Maybe you are looking for
-
I don't know that other files are not hidden behind the triangle. When I send an email from the troubled account, it cannot find the folder sent to save her and gives a message saying that there is no Inbox (trycreate) obviously I can't pick up my ma
-
CMD31T - 100NAS solid light of amber we 1/2 on
On my Modem CMD31T today I discovered the United States, DS and online lights orange. By resetting the modem by hitting the reset button and power off for 30 seconds - light ONLINE, turned green, as well as the lights of the DS. However, in the Unite
-
The download is Win7-P-Retail-en-us-x86.box. I have no software to open it - I'm currently running vista.
-
Someone at - it issues after the update of VRT 2016-02-29-001?
Seems VRT last update broke the power of fire this morning in my lab at home. ASA X 5506. cannot install policies and syslog shows: 2 March 2016 04:16:05 snort [9939] of firepower: FATAL ERROR: dynamic detection library "/ var/sf/detection_engines/*G
-
How to monitor the IPS event logs!
Hello We have a few Cisco IPS and also sensors juniper IDP in our networks, Juniper, I use NSM to analyze the network logs, attacks, generate different types of charts and stuff like that, its so easy to work with and also its informative, but with c