Issue of IAS with the Conc 3005 configuration

Similar Questions

• WRT54G wireless did not cooperate with the automatic Wireless Configuration

  Hello! I wonder if anyone can help me spot the problems I have here: for a while it was not too much a problem, but whenever I try to view the list of wireless networks, it gives the "Windows cannot configure this wireless connection. If you have enabled another program to manage this wireless connection, use that software. "I went in to find records WZC served and I unchecked/checked the option again to make sure it wasn't a source of the problem. Yet whenever I open the "Wireless network connection status" window I only gave 2 options on the tab. The general tab and the Support tab. The third tab is missing, one that would allow me to check the option to let Windows configure my wireless but I can't seem to be able to bring this tab back anything. Any help is appreciated a lot everyone, please and thank you!

  That's the answer. It's something with XP that requires more troubleshooting. If other computers can connect, the router should be fine.

  In any case, can you check the manufacturer's website if they have an updated driver for your wireless network card?

• Update the system with the esata disk configuration

  I want to save my disk main boot to a 3rd sata drive uses the front esata port.  This so that I can install a new SATA (2 x 1 = 2 to) and using configuration RAID 0 with the new hard drive configuration.  Who currently use with 2 sata drives (WD 300 GB 10Krpm = C: disk main boot;) WD 1 to 72K rpm = 1 disc (unformatted); Seagate 250 GB 72 K rpm = disc 2 (unformatted).  Unable to find the training to get in shape for the transfer of backup... Be patient with me, I went big in my bench of first generation project and I started just to get back into the hobby of building a pc.  Any advice?  How can I get vista to access the esata to format it and do a full pc to save on disk 2.  So I want to install the new WD 1 TB sata 72Krpm and remove @D 300 GB 10Krpm drive 0.  At the end, and then restore the PC sauvegardΘ esata data.  Make sense, or is there a better way?

  You partition / prepare a new disk by using disk management, before it can become available for use

• CANNOT ACCESS THE LAN WITH THE EASY VPN CONFIGURATION

  Hello

  I configured easy vpn server in cisco 1905 SRI using ccp. The router is already configured with zone based firewall. With the help of vpn client I can reach only up to the internal interface of the router, but cannot access the LAN from my company. I need to change any configuration of ZBF since it is configured as "deny everything" from outside to inside? If so that all protocols should I match?   Also is there any exemption of NAT for VPN clients? Please help me! Thanks in advance.

  Please see my full configuration:

  Router #sh run
  Building configuration...

  Current configuration: 8150 bytes
  !
  ! Last modification of the configuration at 05:40:32 UTC Wednesday, July 4, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  version 15.1
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  boot-start-marker
  boot-end-marker
  !
  !
  Passwords security min-length 6
  no set record in buffered memory
  enable secret 5 xxxxxxxxxxx
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  !
  No ipv6 cef
  IP source-route
  no ip free-arps
  IP cef
  !
  Xxxxxxxxx name server IP
  IP server name yyyyyyyyy
  !
  Authenticated MultiLink bundle-name Panel
  !

  parameter-map local urlfpolicy TSQ-URL-FILTER type
  offshore alert
  block-page message "Blocked according to policy"
  parameter-card type urlf-glob FACEBOOK
  model facebook.com
  model *. Facebook.com

  parameter-card type urlf-glob YOUTUBE
  mires of youtube.com
  model *. YouTube.com

  parameter-card type urlf-glob CRICKET
  model espncricinfo.com
  model *. espncricinfo.com

  parameter-card type urlf-glob CRICKET1
  webcric.com model
  model *. webcric.com

  parameter-card type urlf-glob YAHOO
  model *. Yahoo.com
  model yapo

  parameter-card type urlf-glob PERMITTEDSITES
  model *.

  parameter-card type urlf-glob HOTMAIL
  model hotmail.com
  model *. Hotmail.com

  Crypto pki token removal timeout default 0
  !
  Crypto pki trustpoint TP-self-signed-2049533683
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 2049533683
  revocation checking no
  rsakeypair TP-self-signed-2049533683
  !
  Crypto pki trustpoint tti
  crl revocation checking
  !
  Crypto pki trustpoint test_trustpoint_config_created_for_sdm
  name of the object [email protected] / * /
  crl revocation checking
  !
  !
  TP-self-signed-4966226213 crypto pki certificate chain
  certificate self-signed 01
  3082022B 30820194 02111101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43647274 31312F30
  69666963 32303439 35323236 6174652D 3833301E 170 3132 30363232 30363332

  quit smoking
  encryption pki certificate chain tti
  for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
  license udi pid CISCO1905/K9 sn xxxxxx
  licence start-up module c1900 technology-package datak9
  username privilege 15 password 0 xxxxx xxxxxxx
  !
  redundancy
  !
  !
  !
  !
  !
  type of class-card inspect entire tsq-inspection-traffic game
  dns protocol game
  ftp protocol game
  https protocol game
  match icmp Protocol
  match the imap Protocol
  pop3 Protocol game
  netshow Protocol game
  Protocol shell game
  match Protocol realmedia
  match rtsp Protocol
  smtp Protocol game
  sql-net Protocol game
  streamworks Protocol game
  tftp Protocol game
  vdolive Protocol game
  tcp protocol match
  udp Protocol game
  match Protocol l2tp
  class-card type match - all BLOCKEDSITES urlfilter
  Server-domain urlf-glob FACEBOOK game
  Server-domain urlf-glob YOUTUBE game
  CRICKET urlf-glob-domain of the server match
  game server-domain urlf-glob CRICKET1
  game server-domain urlf-glob HOTMAIL
  class-map type urlfilter match - all PERMITTEDSITES
  Server-domain urlf-glob PERMITTEDSITES match
  inspect the class-map match tsq-insp-traffic type
  corresponds to the class-map tsq-inspection-traffic
  type of class-card inspect correspondence tsq-http
  http protocol game
  type of class-card inspect all match tsq-icmp
  match icmp Protocol
  tcp protocol match
  udp Protocol game
  type of class-card inspect correspondence tsq-invalid-src
  game group-access 100
  type of class-card inspect correspondence tsq-icmp-access
  corresponds to the class-map tsq-icmp
  !
  !
  type of policy-card inspect urlfilter TSQBLOCKEDSITES
  class type urlfilter BLOCKEDSITES
  Journal
  reset
  class type urlfilter PERMITTEDSITES
  allow
  Journal
  type of policy-card inspect SELF - AUX-OUT-policy
  class type inspect tsq-icmp-access
  inspect
  class class by default
  Pass
  policy-card type check IN and OUT - POLICIES
  class type inspect tsq-invalid-src
  Drop newspaper
  class type inspect tsq-http
  inspect
  service-policy urlfilter TSQBLOCKEDSITES
  class type inspect tsq-insp-traffic
  inspect
  class class by default
  drop
  policy-card type check OUT IN-POLICY
  class class by default
  drop
  !
  area inside security
  security of the OUTSIDE area
  source of security OUT-OF-IN zone-pair outside the destination inside
  type of service-strategy check OUT IN-POLICY
  zone-pair IN-to-OUT DOMESTIC destination outside source security
  type of service-strategy inspect IN and OUT - POLICIES
  security of the FREE-to-OUT source destination free outdoors pair box
  type of service-strategy inspect SELF - AUX-OUT-policy
  !
  Crypto ctcp port 10000
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 2
  Group 2
  !
  ISAKMP crypto client configuration group vpntunnel
  XXXXXXX key
  pool SDM_POOL_1
  include-local-lan
  10 Max-users
  ISAKMP crypto ciscocp-ike-profile-1 profile
  vpntunnel group identity match
  client authentication list ciscocp_vpn_xauth_ml_1
  ISAKMP authorization list ciscocp_vpn_group_ml_1
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set TSQ-TRANSFORMATION des-esp esp-md5-hmac
  !
  Profile of crypto ipsec CiscoCP_Profile1
  game of transformation-TRANSFORMATION TSQ
  set of isakmp - profile ciscocp-ike-profile-1
  !
  !
  !
  !
  !
  !
  the Embedded-Service-Engine0/0 interface
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  !
  interface GigabitEthernet0/0
  Description LAN INTERFACE-FW-INSIDE
  IP 172.17.0.71 255.255.0.0
  IP nat inside
  IP virtual-reassembly in
  security of the inside members area
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1
  Description WAN-INTERNET-INTERNET-FW-OUTSIDE
  IP address xxxxxx yyyyyyy
  NAT outside IP
  IP virtual-reassembly in
  security of the OUTSIDE member area
  automatic duplex
  automatic speed
  !
  interface Serial0/0/0
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  no fair queue
  2000000 clock frequency
  !
  type of interface virtual-Template1 tunnel
  IP unnumbered GigabitEthernet0/0
  ipv4 ipsec tunnel mode
  Tunnel CiscoCP_Profile1 ipsec protection profile
  !
  local IP SDM_POOL_1 172.17.0.11 pool 172.17.0.20
  IP forward-Protocol ND
  !
  no ip address of the http server
  local IP http authentication
  IP http secure server
  !
  IP nat inside source list 1 interface GigabitEthernet0/1 overload
  IP route 0.0.0.0 0.0.0.0 yyyyyyyyy
  IP route 192.168.1.0 255.255.255.0 172.17.0.6
  IP route 192.168.4.0 255.255.255.0 172.17.0.6
  !
  access-list 1 permit 172.17.0.0 0.0.255.255
  access-list 100 permit ip 255.255.255.255 host everything
  access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
  access-list 100 permit ip yyyyyy yyyyyy everything
  !
  !
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  Line con 0
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line vty 0 4
  transport input ssh rlogin
  !
  Scheduler allocate 20000 1000
  end

  A few things to change:

  (1) pool of IP must be a single subnet, it is not the same subnet as your subnet internal.

  (2) your NAT ACL 1 must be changed to ACL extended for you can configure NAT exemption, so if your pool is reconfigured to be 10.10.10.0/24:

  access-list 120 deny ip 172.17.0.0 0.0.255.255 10.10.10.0 0.0.0.255

  access-list 120 allow ip 172.17.0.0 0.0.255.255 everything

  overload of IP nat inside source list 120 interface GigabitEthernet0/1

  No inside source list 1 interface GigabitEthernet0/1 ip nat overload

  (3) OUT POLICY need to include VPN traffic:

  access-list 121 allow ip 10.10.10.0 0.0.0.255 172.17.0.0 0.0.255.255

  type of class-card inspect correspondence vpn-access

  game group-access 121

  policy-card type check OUT IN-POLICY

  vpn-access class

  inspect

• 'Problem with the paging file Configuration '.

  I use a Windows 7 Ulitmate 64 bit vm on my 15 "MacBook Pro (Retina Display). I attributed to the VM 1 core processor and 2 GB of RAM. His virtual HD is 64.2 GB (molten ' preference > general ", but molten" Preferences > hard drive "the slider is set to 40 GB.) In "Preferences > general" there is no recoverable space. Looking at the control panel of Windows 7, I see that there is barely 1 GB free of my 40 GB drive.

  The SSD on Mac is 250 GB and has 67 GB of free, so I guess I could until hard drive of the virtual machine to 60 or 70 GB of space and not paralyze the Mac operating system, and that I can do that by stopping the virtual machine deletion of snapshots and then mount the virtual HD size with the cursor before restarting.

  Moreover, this is the message I get from Windows at startup. Curiously, it is only after I have connected to my account, not as part of the start-up procedure, and it reappears if I log in. I don't have an another user account on the machine, but I guess that the problem comes from the virtual HD is almost full:

  Yes, deletion of snapshots and enlarge the size of the virtual hard disk (and virtual partition) will give you additional disk space on the prompt to work with but how is virtual memory configured in the Windows 7 guest?  You can watch that too.

• Problems with the 'Grid entity' configuration consistency

  I have difficulty getting the configuration work "Entity grid" consistency. I'm on Oracle Version consistency 3.6.0.4 Build 19111. I carefully followed the instructions for the third scenario configuration consistency documented on the page "JPA on the grid" [url http://docs.oracle.com/cd/E14571_01/doc.1111/e16596/tlcgd003.htm#CHDGGGAJ] here. I will include excerpts from the records, but I think that I have been following the docs. I must be missing something that the docs report directly? Any ideas would be greatly appreciated.
  
  The problem I encounter is that when this 'Grid entity' coherence mode is used, the entities are not reading from the database when the application starts. The application behaves as if there is absolutely no data in the database, even if I know that I have lines in tables to backup my entities. In my test dummy application, I also have problems persistent entities. If I temporarily disable consistency commenting annotations {noformat}@Customizer{noformat} entity everything works perfectly (DataSet starting loads from the database as expected and new entities are correctly preserved). If I change to the "grid + hidden +" things configuration seems to work fine. But it's not ideal because we want the features of read/write of entityof the grid.
  
  Here is my file of coherence-cache - config.xml (corresponds almost exactly to the documentation):

  <?xml version='1.0'?>
  <cache-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xmlns="http://xmlns.oracle.com/coherence/coherence-cache-config"
     xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-cache-config coherence-cache-config.xsd">
    <caching-scheme-mapping>
      <!--
        Map all entity classes to the eclipselink-distributed-readwrite scheme
  -->
      <cache-mapping>
        <cache-name>*</cache-name>
        <scheme-name>eclipselink-distributed-readwrite</scheme-name>
      </cache-mapping>
    </caching-scheme-mapping>
    <caching-schemes>
      <distributed-scheme>
        <scheme-name>eclipselink-distributed-readwrite</scheme-name>
        <service-name>EclipseLinkJPAReadWrite</service-name>
        <!--
          Configure a wrapper serializer to support serialization of relationships.
        -->
        <serializer>
            <instance>
               <class-name>oracle.eclipselink.coherence.integrated.cache.WrapperSerializer</class-name>
            </instance>
        </serializer>
        <backing-map-scheme>
          <read-write-backing-map-scheme>
            <internal-cache-scheme>
              <local-scheme/>
            </internal-cache-scheme>
            <!-- 
               Define the cache scheme 
             -->
            <cachestore-scheme>
              <class-scheme>
                <class-name>oracle.eclipselink.coherence.integrated.EclipseLinkJPACacheStore</class-name>
                <init-params>
                  <!-- This param is the entity name -->
                  <init-param>
                    <param-type>java.lang.String</param-type>
                    <param-value>{cache-name}</param-value>
                  </init-param>
                  <!-- This param should match the persistence unit name in persistence.xml -->
                  <init-param>
                    <param-type>java.lang.String</param-type>
                    <param-value>test-pu</param-value>
                  </init-param>
                </init-params>
              </class-scheme>
            </cachestore-scheme>
          </read-write-backing-map-scheme>
        </backing-map-scheme>
        <autostart>true</autostart>
      </distributed-scheme>
    </caching-schemes>
  </cache-config>

  Persistence.XML:

  <?xml version="1.0" encoding="windows-1252" ?>
  <persistence xmlns="http://java.sun.com/xml/ns/persistence"
               xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
               xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"
               version="1.0">
    <persistence-unit name="test-pu">
      <provider>org.eclipse.persistence.jpa.PersistenceProvider</provider>
      <jta-data-source>jdbc/WineDS</jta-data-source>
      <non-jta-data-source>jdbc/WineDS</non-jta-data-source>
      <class>datagridtest.WineEntity</class>
      <properties>
        <property name="eclipselink.target-server" value="WebLogic_10"/>
        <property name="eclipselink.target-database" value="Oracle11"/>
         <!--<property name="eclipselink.ddl-generation" value="create-tables"/>-->
      </properties>
    </persistence-unit>
  </persistence>

  entity class:

  @Entity(name="Wine")
  @NamedQueries({
    @NamedQuery(name = "Wine.findAll", query = "select o from Wine o"),
    @NamedQuery(name = "Wine.findByRegion", query = "select o from Wine o where o.region = :region"),
    @NamedQuery(name = "Wine.findByVintage", query = "select o from Wine o where o.vintage = :vintage"),
    @NamedQuery(name = "Wine.findByWinery", query = "select o from Wine o where o.winery = :winery")
  })
  @SequenceGenerator(name = "Wine Seq", sequenceName = "WINE_SEQ", allocationSize = 50, initialValue = 50)
  @Customizer(CoherenceReadWriteCustomizer.class)
  public class WineEntity implements Serializable {
       @Id
       @GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "Wine Seq")
       private Integer id;
       @Version
       private Integer version;
       
       private String name;
       
       private int vintage;
       
       private String region;
       
       private String winery;
       
       typical getters and setters follow...
       ....

  Extracts of EJB:

  @Stateless(name = "SessionEJB", mappedName = "PortletProducerApplication-DataGridTest-SessionEJB")
  public class SessionEJBBean implements SessionEJBLocal {
       @PersistenceContext(unitName="test-pu")
       private EntityManager em;
       
       ...
       
       public List<WineEntity> findAllWines() {
            TypedQuery<WineEntity> allWinesQuery = em.createNamedQuery("Wine.findAll", WineEntity.class);
            return allWinesQuery.getResultList();     
       }
       
       ...
       
  }

  (IWLS) server logs:

  <Jun 25, 2012 3:54:41 PM EDT> <Notice> <EclipseLink> <BEA-2005000> <2012-06-25 15:54:41.686--ServerSession(1768045153)--EclipseLink, version: Eclipse Persistence Services - 2.1.3.v20110304-r9073> 
  <Jun 25, 2012 3:54:41 PM EDT> <Notice> <EclipseLink> <BEA-2005000> <2012-06-25 15:54:41.688--ServerSession(1768045153)--Server: 10.3.5.0> 
  <Jun 25, 2012 3:54:42 PM EDT> <Notice> <EclipseLink> <BEA-2005000> <2012-06-25 15:54:42.142--ServerSession(1768045153)--file:/C:/Users/EDITED/AppData/Roaming/JDeveloper/system11.1.1.5.37.60.13/o.j2ee/drs/TestApp/DataGridTestEJB.jar/_test-pu login successful> 
  2012-06-25 15:54:42.502/58.626 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Loaded operational configuration from "jar:file:/C:/Oracle/Middleware/oracle_common/modules/oracle.coherence_3.6/coherence.jar!/tangosol-coherence.xml"
  2012-06-25 15:54:42.513/58.637 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Loaded operational overrides from "jar:file:/C:/Oracle/Middleware/oracle_common/modules/oracle.coherence_3.6/coherence.jar!/tangosol-coherence-override-dev.xml"
  2012-06-25 15:54:42.516/58.640 Oracle Coherence 3.6.0.4 <D5> (thread=[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
  2012-06-25 15:54:42.524/58.648 Oracle Coherence 3.6.0.4 <D5> (thread=[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
  
  Oracle Coherence Version 3.6.0.4 Build 19111
   Grid Edition: Development mode
  Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved.
  
  2012-06-25 15:54:42.673/58.797 Oracle Coherence GE 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Loaded cache configuration from "file:/C:/workspaces/spaces_branch/TestApp/DataGridTest/src/coherence-cache-config.xml"
  2012-06-25 15:54:43.360/59.484 Oracle Coherence GE 3.6.0.4 <D4> (thread=[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): TCMP bound to /172.30.112.202:8088 using SystemSocketProvider
  2012-06-25 15:54:46.747/62.871 Oracle Coherence GE 3.6.0.4 <Info> (thread=Cluster, member=n/a): Created a new cluster "cluster:0xC4DB" with Member(Id=1, Timestamp=2012-06-25 15:54:43.377, Address=172.30.112.202:8088, MachineId=49866, Location=site:EDITED,machine:EDITED,process:10776, Role=WeblogicServer, Edition=Grid Edition, Mode=Development, CpuCount=4, SocketCount=2) UID=0xAC1E70CA000001382535DD31C2CA1F98
  2012-06-25 15:54:46.757/62.881 Oracle Coherence GE 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Started cluster Name=cluster:0xC4DB
  
  Group{Address=224.3.6.0, Port=36000, TTL=4}
  
  MasterMemberSet
    (
    ThisMember=Member(Id=1, Timestamp=2012-06-25 15:54:43.377, Address=172.30.112.202:8088, MachineId=49866, Location=site:EDITED,machine:EDITED,process:10776, Role=WeblogicServer)
    OldestMember=Member(Id=1, Timestamp=2012-06-25 15:54:43.377, Address=172.30.112.202:8088, MachineId=49866, Location=site:EDITED,machine:EDITED,process:10776, Role=WeblogicServer)
    ActualMemberSet=MemberSet(Size=1, BitSetCount=2
      Member(Id=1, Timestamp=2012-06-25 15:54:43.377, Address=172.30.112.202:8088, MachineId=49866, Location=site:EDITED,machine:EDITED,process:10776, Role=WeblogicServer)
      )
    RecycleMillis=1200000
    RecycleSet=MemberSet(Size=0, BitSetCount=0
      )
    )
  
  TcpRing{Connections=[]}
  IpMonitor{AddressListSize=0}
  
  2012-06-25 15:54:46.809/62.933 Oracle Coherence GE 3.6.0.4 <D5> (thread=Invocation:Management, member=1): Service Management joined the cluster with senior service member 1
  2012-06-25 15:54:47.155/63.279 Oracle Coherence GE 3.6.0.4 <D5> (thread=DistributedCache:EclipseLinkJPAReadWrite, member=1): Service EclipseLinkJPAReadWrite joined the cluster with senior service member 1
  INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
  INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
  [EL Info]: 2012-06-25 15:54:47.351--ServerSession(1901778202)--EclipseLink, version: Eclipse Persistence Services - 2.1.3.v20110304-r9073
  [EL Info]: 2012-06-25 15:54:47.351--ServerSession(1901778202)--Server: 10.3.5.0
  [EL Info]: 2012-06-25 15:54:47.551--ServerSession(1901778202)--EclipseLinkCacheLoader-test-pu login successful

  And the error when you try to make persistent the new entity:

  javax.ejb.TransactionRolledbackLocalException: Error committing transaction:; nested exception is: javax.persistence.OptimisticLockException: Exception [EclipseLink-5004] (Eclipse Persistence Services - 2.1.3.v20110304-r9073): org.eclipse.persistence.exceptions.OptimisticLockException
  Exception Description: An attempt was made to update the object [datagridtest.WineEntity@1c59a6cc], but it has no version number in the identity map. 
  It may not have been read before the update was attempted. 
  Class> datagridtest.WineEntity Primary Key> 2,050
       at weblogic.ejb.container.internal.EJBRuntimeUtils.throwTransactionRolledbackLocal(EJBRuntimeUtils.java:238)
       at weblogic.ejb.container.internal.EJBRuntimeUtils.throwEJBException(EJBRuntimeUtils.java:136)
       at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocalObject.java:650)
       at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetry(BaseLocalObject.java:455)
       at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:52)
       at datagridtest.SessionEJB_qxt9um_SessionEJBLocalImpl.mergeWineEntity(Unknown Source)

  So just to sum up, I currently see two problems: 1) no data from the database consistency and implementation — why not consistency out of database? and (2) what's this persistent mistake on OptimisticLockException? Thanks again for any help.

  JPQL API criteria or both will result in coherence filters when using GridRead or GridEntity.
  TopLink grid has no way of knowing if the data in the cache are sufficient to satisfy the query, for example based on the provided query TopLink grid would determine how between a user with no book and insufficient. Your application will need to determine that not enough has been stored in the cache or to perform an initial charge in bulk for a particular user to redirect the request to the database programmatically. Queries of grid can easily be redirected to the database by setting the IgnoreDefaultRedirector on the query using query.setHint (QueryHints.QUERY_REDIRECTOR, new IgnoreDefaultRedirector()); Read from the database of entities will be automatically pushed to the consistency.

• Problems with the permissions/security configuration XP Home Edition - can not download any software!

  I have Norton 360 on my computer.  OS is XP Home Edition. My computer very slow in normal mode (not in SafeMode if) I chatted for 4 hours with the help of Norton Tech... try to allow remote access, which could not happen because the piece of software that must be downloaded has been blocked, and I got a pop-up box saying that security settings do not need to download this software.  Then we tried to download Norton360 to reinstall it, and I got the same message.

  Since Explorer crashes constantly, and I'm very furstrated with it, I decided to try the same Firefox downloads.  Software download, but trying to run them, I got a message syaing that I don't have permission to run them.

  What should I do?  I'm NOT a computer guru - actually I'm computer disabled... Please help me.

  Hi IG18912,

  · Have you logged on as a computer administrator?

  · What is the version of Internet explorer, you have installed?

  1. follow the procedure that allows the file below to download in Internet Explorer.

  a. open Internet Explorer.

  b. click on tools, then options.

  c. click on the Security tab.

  d. Select the Internet Zone.

  e. click on the custom level button and then scroll down to download.

  f. be sure to enable the download of the file.

  g. click on apply and Ok

  h. restart Internet Explorer and see if that helps.

  2. in addition, follow the steps in the link below: error message when you try to open the the Task Manager on a Windows XP-based computer: "Task manager has been disabled by your administrator":http://support.microsoft.com/kb/913623

  3. on-line virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below:http://onecare.live.com/site/en-us/default.htm

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Export issues of sequences with the correct settings for DVD

  Hi - I'm relatively new at first, but working on a project that is very important for me - for the life of me I can't understand correctly export settings.

  I have compiled from home movies of my family in a few sequences for the 60 years of my dad. I worked on these weeks now get cleaned and put all together. In total, it's about 24 hours of footage. These videos have all turned initially on a very old camera video in the 80 and 90 - the kind you actually stuck a VHS tape in. My ultimate goal is to put these or on a DVD (although I guess that's too many images for one), or a drive flash or something of all compiled in one video.

  So far, I got error messages on not enough disk space - so I tried breaking the sequences and exported individually as smaller files. But now, when I export those, all videos come out tiny - the video focuses on a much larger screen, do more fit to size. I studied everything about elongation and corresponding parameters and I tried everything. Of course I do not something good, I don't know what.

  I tried all different export settings, the settings of the sequence, and I thought I was following with the sequence settings, but I guess I'm not. Although I worked on it for weeks, I am out of time. His birthday was yesterday, and I wanted to give her the finished disc tomorrow. This does not seem possible as I am about to give up!

  Someone please help! I would be grateful if someone could guide me through what my sequence settings should be and what my export settings should be and how to get the video output to the correct size for the screen.

  I appreciate your help,

  Danielle

  Time of export will vary widely, depending on at least these factors

  1 - your computer... Processor and the amount of RAM, and is this external drive, USB2 and USB3?

  2. what you change, and effects that you have applied your 718 x 480 video size... is odd, the usual when scanning a VHS tape is 720 x 480, so your video requires 'some much' extra processing

• Problem with the Toshiba 32SL738F configuration menu

  I can t get into the configuration menu of the TV (model 32SL738F). I have no options to take when I get in the configuration of the remote control. It is possible to have several code (PIN)? I don t know where to go. Thank you

  rontu_florin, depending on the specific English operating manual, the code of universal security (password), (at page 55 in the 'Q & A' section), is * 1276.*

  The factory default security code or password is * 0000 * (i.e. four zeroes)

  I am unable to assist you in how to enter codes if you do not see the options, I suggest you if you enter the menu of English language there might be a possibility that some options that have been hidden can (CAN ONLY!), can be consulted, this was found by another owner, with a different problem , in another thread in this forum.

  _I can only suggest, read the carefully_ manual...

  donhe7

• A bet with the network team - configure the VLANs on Teddy does not work against Cisco?

  Hello

  We have a great place of Esx and I have a bet with one of the network Admins.

  I configured a vSwitch to work with 1 bear. On this vSwitch I configured 1 vlan with a Vlan ID 100

  I told the guy from the network to set up the bear side here and he said he has set up 'Access' and not trunk as normally I ask because it's only 1 Vlan.

  I said ok and we tried and nothing works, when I configured the Vlan 0 in the Esx, it started working.

  Of course we cannot leave it like that and need to Config the Vlan on the Esx.

  I told them that once I configured the Vlan on my side there is nothing to do there, and they need to do the thing here.

  they say the same thing.

  Who is right? It is something they need to configure side here if she's 'access' and not 'trunk '?

  or is it something at my side?

  This mayble help your network http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004074 management team

  and

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1003806

  Please, do not forget the points of call of the "useful" or "correct" answers

  Mauro Bonder - moderator

• After that switch on my PC works for a minute then stops, this happens 3 times then starts with the last good Configuration

  It started only four days ago, I spend on the PC runs for a minute then stops. This can happen in 3 or 4 times. can Ichoose last good known Configuration and running a CHKDSK and usually begins.

  Hello

  1. Since when are you facing this problem?
  2. Did you make any recent changes?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  If the computer works fine in safe mode, then I suggest you perform the check and clean boot if this can help:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  For more information, see this link:
  http://support.Microsoft.com/kb/320299

  It will be useful.

• Need help with the disks 'unreadable' configuring software raid after the death of the startup disk and system restored.

  I'm looking for some advice on how to restore a windows xp installation software raid 5 that was running on my XP system. I had a problem when the startup disk has failed, but I was able to backup the system before it can. I replaced the drive and restored the system and everything came, but I was not smart to do this and accidently left the readers connected when restoring raid. I don't know if windows has done something when I tried to install XP on the new drive, or maybe something else has happened when I restored the system from the backup, but my raid drives can not be used. There was a moment in the restaurant business I saw a message on the MBR, but I thought that was just for the drive being restored. I didn't have a single player who held any information on the other disks in the system, but I'm not 100% sure on that.

  When the system boots the windows logo screen takes 10-20 minutes before you get on the desktop. Windows Disk Manager takes 20-30 minutes to fill the list of drives and status on the disks three raid is 'dynamic' and 'unreadable' is not reassuring. I suspect it's a problem MBR or partition table that must be corrected before trying to reactive the raid, but this is just speculation.

  The raid drives are on a promise ide/scsi disk and make it appear to start correctly with names and sizes. After that I get nothing. I do not have another scsi controller (or), but I thought I'd try active @ partition recovery to see if she can find information on the disks.

  I hope someone has some experience with recovery like this, because this is a first for me. I thought I was pretty sure running a raid-5, but wouldn't you know, the tech gods have found a way to crush my plans...

  Thanks in advance for any help!

  Hello

  Thank you for visiting the Microsoft answers community site. Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows XP IT Pro Forums.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• brush lag issues and latency with the Brush tool

  Since the update I have problems of serious lag with my brush tool. I can't draw anything, because the program can not deal with my shots. I have a very capable office; What gives?

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  If you continue to see any questions send us an e-mail to [email protected]

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• problem with the instanceconfig.xml configuration

  Hello
  I am trying to add a few additional options in my instanceconfig.xml file. But every time I have to add changes (as < ServerInstance > < AllowRememberPassword > n < / AllowRememberPassword >) and restart the service server OBI and OBI, service of presentation server presentation server service is does not start.
  And when I cancel the service changes presentation server will begin end.
  Please give me your point of view to address this issue.
  
  Thanks and greetings
  Suresh.

  Hello...

  Delete the tag and paste only...
  NO.

  This should paste before
  

  It works for me

  Mark as correct if it is correct ;)

  Good luck

  Thank you & best regards
  Kishore Guggilla

  Published by: Kishore Guggilla on October 22, 2008 12:54

• Help with the best Wifi configuration

  I'm moving into a new home that is total 3 floors (basement 1, 2 above). I currently use an airport extreme.  I don't think just the Airport extreme will be enough for the new House.  What material you think I should add to create a strong wifi network in the new House?

  Thank you!

  At a minimum, assuming you want a decent quality signal on each floor, you'll need a total of at least 3 airports... one location per floor... or... If you do not need a cover for the entire floor, so that the airport would be located in the heart of the area on each floor where you plan to use wireless.

  Ideally, you will use the same AirPort Extreme devices on each floor.

  For the best performance by far, plan to connect all airports together using a wired Ethernet cable connection. For example, if the airport on the first floor will be your "primary" router, then airports in the basement and upstairs both would connect back to the airport of first floor using Ethernet cables.