Update the system with the esata disk configuration

Similar Questions

• my laptop is hp 3020ee I update the hard disk of 500 GB to 6 GB patriot ram can I use recovery disk

  my laptop is hp 3020ee I update the hard disk of 500 GB to 6 GB patriot ram can I use 5 recovery disks

  Yes, you should be able to use the recovery discs.

• How to save important files a files on a dvd before doing a restore of the entire system with factory.so disk I am able to reinstall computer after system restore.

  I need to do a restore of the entire system with disc received from factory.but that I have personal files and folders that I need keep.such as banking, contacts, photos, ect. ect. How do I put them on a dvd a restore then their return after the full system restore

  Hello

  If the system still boot and CD/DVD Burns just put in a DVD-R (write once) or DVD - RW (burn
  several times)-it will encourage - when its ready use Windows Explorer to drag and drop files (and
  their content) on the DVD. When you're ready, click BURN. I would like to make a couple of each DVD for
  Security with redundancy. These will not be encrypted and you can access the files out of them or
  subsequently copy on a hard drive.

  Basically, make sure you know what you want to copy the files and put them in a blank DVD to write.

  ---------------------

  If the system does not start, then you will need to put the drive in another computer or in a
  External enclosure USB so you can copy files to removable media.

  ---------------------

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx

  How to burn a CD with Vista
  http://ITsVISTA.com/2006/12/ITsVISTA-Tip-10-how-to-burn-a-CD-with-Vista/

  Burn a CD or DVD in Windows Vista
  http://maximumpcguides.com/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Vista/

  Microsoft video - how to burn CD/DVD
  http://www.YouTube.com/watch?v=0BwF60m05m8

  Excellent Forum for help with programs and CD/DVD problems
  http://Club.cdfreaks.com/

  Burn a CD or DVD in Windows Media Player
  http://windowshelp.Microsoft.com/Windows/en-us/help/30ffa641-B682-4315-8c7e-8a29f383a7131033.mspx
  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/51a88740-Abda-4144-9176-cec79cca31e81033.mspx

  Burn a CD or DVD in Windows Media Center
  http://windowshelp.Microsoft.com/Windows/en-us/help/9ee6cb78-bd7e-4DE3-A154-82d40c4289e01033.mspx

  Burn a CD or DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx
  How to burn an Audio CD - see also related Articles
  http://www.vista4beginners.com/how-to-burn-an-audio-CD
  Burn a CD or DVD using Windows Vista - a video
  http://www.YouTube.com/watch?v=0BwF60m05m8

  Disc burning: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/2fa35b0d-B280-4589-9805-55e753888f5c1033.mspx

  Should which CD or DVD format I use?
  http://windowshelp.Microsoft.com/Windows/en-us/help/2af64e60-60AA-4d79-AB6C-3a5db5806cbe1033.mspx

  Windows Media Player playlist: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/4bf0d986-a1cb-40d2-94de-85dba30a83831033.mspx

  Get the most out of WMP11http://windowshelp.microsoft.com/Windows/en-US/mediaplayer11/default.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Validation of the VM disk configuration error

  Hey,.

  I have Visual Studio 2.0 is trying to build a base unit. I choose all the default options and when I try and validate the profile, I get the following error

  Failed: Abandoned by the intervention of the user or system (signal cannot call method "getAttribute" to a value not set in line /opt/vmware/lib/build/VADK/Test.pm 1567.

  Has anyone seen this error? And what guys do you recommend that I'm trying to get my building going?

  The complete validation log is below...

  VMware Studio version - 2.0.0.1017 build 185256

  Description - VMware Studio 2.0.0

  Validation of profile schema...

  Validation of the configuration and generation parameters VM.

  Validate the version of the profile...

  Validate the version of the virtual machine formatting...

  Validation of the Basic virtual machine memory requirements...

  Validation of all profile file/directory names...

  Validation of user names and passwords of the VM...

  Path of the machine virtual logo validation...

  Validation of the disk of the virtual machine configurations...

  Failed: Abandoned by the intervention of the user or system (signal cannot call method "getAttribute" to a value not set in line /opt/vmware/lib/build/VADK/Test.pm 1567.

  has been taken).

  Cleaning of... Deleting the temporary files.

  Construction/Validation process aborted successfully.

  Pls, Chrome is not supported. And when you work with IE/Firefox, pls recreate your profiles from scratch so that they do not carry any xml remains from the browser not supported.

• update time system with a simple user interface

  Hello

  I need to update the time on the simple IO system but when I use 'get the time system and date.vi. The indicator on the front is not updated every second, there are at least 5 seconds delay. I tried to use parallel so that the method of the loop, but the problem still persists

  Any ideas guys?

  Concerning

  VERP

  In fact, I found the flaw. Fault is with 'ME '.

  I was operating the VI on a remote computer in the LABORATORY and there was delay in the transmission that is why while I scratch my head. Time of VI display correctly to the computer in the lab.

• After the hard disk configuration, system assigns an incorrect letter to the reader

  I've completely dumped my HDD and it washed.

  Configured the drive hard and re - format to NTFS with no partitions.

  I unplug everything not used during reinstallation except monitor, keyboard and mouse "Wired."

  Reinstalled XP from the disk.

  Guard system identifier 'E' like 'Local disk' or 'Hand' hard instead of using 'C '.

   

  I've "cleaned" my drive several times before but never this problem even without being able to correct a cleaning extra (s) until the disk correctly record labels.

   

  Why this time and what is the difficulty of obtaining the 'c' labeled as the 'Local' or 'hand drive '?

  Hello

  ·         You have several configured on the system start?

  This can happen if you have a multiboot system, or if there are multiple partitions on the disk.

  During the installation of XP, make sure that you select C: as the partition where you want to install the operating system. Then to comply once more he comply when it prompts you to install XP on the C: drive. Check whether the problem is resolved. I suggest you follow the steps mentioned in the article below.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

• The hard disk configuration

  I am waiting for hard drive prices come back down, and in the meantime I am installing a hard drive for my new build system. I'm a newbie to video editing and will be editing 1080 p MPEG-4 AVC / H.264 (Canon Rebel t2i). I have 8 GB of ram.

  Here's what I have available, I think they should be in square brackets >:

  60GB SSD (Corsair Force 3) < OS/progs >

  500GB 7200 RPM external (but connected via esata) < media/data >

  300 GB drive at 5400 RPM laptop drive < work >

  250 GB drive at 5400 RPM laptop <? swap file? >

  What is the recommended configuration for this? (it's just to last me for about 6 months)

  Thanks in advance

  Mushkin 8 GB DDR3

  MSI N460GTX-M2D1GD5/OC2 GeForce GTX 460 1 GB

  Corsair Force Series 3 CSSD-F60GB3A-BK 2.5 "SATA III SSD 60 GB

  Power PC and silent cooling, High Performance Mk II 750W 80PLUS Silver

  ASUS P8P67-M PRO LGA 1155

  Intel Core i5 - 2500K CPU (O.C.)
  

  Looks like you thought about her with the means at your disposal. Nothing wrong with this configuration and for your peace of mind, eSATA is as fast as the SATA.

• Qosmio F20-149: how to start the eSATA disk OS?

  How can I boot my OS from an eSATA drive connected via a PCMCIA-SATA Adapter?

  Post edited by: MrG

  Hello MrG

  I was very interested about your previous assignment and I have to say I wonder what you do with your Qosmios when questions still outstanding.

  In any case, I know the start if the BIOS supports booting from PCMCIA, maybe it will work, but I guess on your Qosmio, it is not possible.

  Can you please give me more info on the operating system installed on the external HARD drive? It is the same image as on F20 or some other HDD portable?

• Windows Update, the components are configured incorrectly, the code; C00D11C6

  I don't know, just a beginner?

  Assuming that your problem has not been resolved (or your question has not been answered to your satisfaction), please uncheck all my previous answers as RESPONSE then mark that other responses as RESPONSE unless & until your problems have been resolved.

  -Online Please do it now, before you respond to this message to avoid any confusion. Thank you.
  

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  I also cumulative updates for internet explorer 9... KB2647516 ON 15/02/12

  OK, but in your answer 16 March above, you said that KB2647516 was neither installed nor listed in installed updates...

  #5 everyone except KB2647516 & KB2633874...

  .. just like you did in response #2 in your last message, too:

  Q: neither KB2647516, nor KB2633874, nor KB2497640 is listed in the installed updates view, is that correct?
  A: I checked a couple of times, could not find these updates.

  At this point, I will transmit to Microsoft Support for all the help. Good luck (both you & technical support)!

   

• Need help with my hard disk configuration

  Hi guys,.
  Ive read a lot about the best configuration of hard disk for my editing video pc... but I need some feedback. Here are my specs. Im running Windows 10 with this HD configuration. I use my system for Premiere Pro, Photoshop, Lightroom, and After Effects.

  1 SDS drive 250 GB operating system, program files, swap file

  2 HDD (sata III) of disk 2 TB stockmedia / assets / my documents

  Disc 3 HARD drive (sata III) projects 2 TB

  4 drive HARD drive (sata III) 750Go export/renders, PP previews

  5 HARD drives (sata III) of disk cache AE, PP, scratchdisk photoshop, captured 750Go audio/video media cache

  
  

  If it would be really beneficial to my performance, I also have another HARD drive disc (sataIII) 2 TB which I could build in the case.

  It looks all right? Or you guys change anything? I have a RAID configuration, but what I understand... RAID 3 or 5 would have need of more disks (same size preferred) and preferably a hardware controller. But my budget will not allow this for now.

  Thanks in advance for your comments guys...

  You probably already read this, but if you do not page Tweakers: Disk Setup

  you drive configuration looks good, you can use the windows resources monitor to determine if the readers are struggling as well.

  If I had to change something, I would try 2x2tb raid 0 (disk 2 and 3) for media/assets/projects using mbd raid (if your mbd supports raid). I might even try to add the spare hard drive 2 TB, 3x2tb RAID 0 for performance even more. If 'my documents' is just random storage (not for your active video projects), you can move to another drive out of the raid, as the 4 drive or another room to spare. Since you already have these parts, raid can be a good way to boost performance for free. any raid can add some risks more data loss, so you just make sure that your backups stick to the currents. You can save a copy of the project first (just the file .prproj) in a few different places at the end of your editing sessions, or use auto-enregistre to another location, to avoid having to save as much.

  Moreover a unique fast sata ssd is comparable to 3 hard drives in raid, so you could look (s) ssd, sata for better cheaper and simpler vs an expensive hardware raid card. SATA ssd prices keep falling off and show no signs of slowing down, so if/when you get some later, they could be even more affordable.

• Are unable to recovery system with a boot disk Options

  I think my MBR is corrupted or my drive hard OS is dead.

  I created a neosmart.com boot disk and have set the BIOS to boot from the CDROM.  After the POST, the display shows "Windows is loading files".  The Installation of Vista screen should appear and allows me to go click on "Repair my computer", but it doesn't.  It passes to the black screen with green bars of the hunt.  No window of the prompt... nothing. I want to get to the System Recovery Options so that I can run fixmbr and fixboot.  Any suggestions?

  Thank you
  Jeff

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  Read the above link what it should look like when loading, and Options, you should get.

  If it does not load at which you can work with it, you have a deeper seated problem you do.

  Contact the manufacturer of your computer.

  See you soon. Mick Murphy - Microsoft partner

• Disk configuration optimal (I know I know)

  Hi, I've been through a lot of forum posts and read the guide to tweak for the suggested disk configuration. I understand that everyone is different and would just check my plan is optimal for what I have.

  Currently my system configuration:

  CPU: I7 - 4790 LGA 1150 K

  MB: MSI X 97

  RAM: 32GB

  VIDEO: GTX 980 (have 2 but will sell such that there seems to be no advantage without CPU high range possibly)

  HD1: MX550 Crucial 256 GB or 512 GB (purchase intent)

  HD2: Samsung 840 Pro 128GB

  HD3: Samsung 850 Pro 256GB

  HD4: Samsung 850 Pro 256GB

  HD5: WD 2 TB Black

  HD6: WD Black 1 TB

  Based on the guide to tweak for the number of discs that I have, I should their RAID, but the problem is that they are not similar type/size and the LGA 1150 may be limited to an external RAID solution? In addition, software RAID can be problematic too?

  I'm especially start with video editing and it's fun, but my attempts on my laptop low power gave me a long wait times/UN-viewable reading/crashes, so why I am trying to build a somewhat appropriate system. Currently, I'm only GoPro 2.7 K and raw footage of 1080 p and I hope perhaps soaking with images 4 K of a Panasonic GH4 (once I bought the camera hah) if my system takes care of everything. I don't plan to have my final exports longer than 5 minutes at the moment. Given current HW, I intend to configure the disks as follows:

  Operating system and the programs -> HD1: MX550 Crucial 256 GB or 512 GB (not really play the games, but can try some, I know they say to clean your machine of editing)

  Media cache and previews -> HD3: Samsung 850 Pro 256 GB (size will be sufficient for what I intend to treat?)

  Project files -> HD4: 850 Pro 256 GB Samsung (once the project is finished, transfer to HD5: WD Black 2 TB)

  Media Source files -> HD4: Samsung 850 Pro 256 GB (as a direct import from the camera to work with SSD speed, then once the project is finished, transfer everything to HD5: WD Black 2 TB)

  Export -> HD2: Samsung 840 Pro 128 GB (as a direct export of rendering, and then transfer the file to HD5: WD Black 2 TB)

  Backup of the HD1 and some media -> HD6: WD Black 1 TB

  My thought to work on the SSD is first to get SSD speed, and then transfer them to the bigger HARD drive for backup, and the finished product. Would put HD3: Samsung 850 Pro 256 GB and HD4: Samsung 850 Pro 256 GB in RAID SW 0 be better for the Cache/previews of media and project files and then assign HD5: WD Black 2 TB for the Source of media files?

  I'm seeing what I can get with what I have to work with the best configuration, and if there is a significant performance gain by changing the configuration a bit by adding another drive, or so, I consider that also. Thank you very much for your time and help in advance!

  Wow, interesting and expensive record collection!

  Do not buy the essential! I like critical readers, but you have a great opportunity to buy a 850 Pro always for one SSD RAID 0 array. My suggestion:

  Boot/OS programs / = 128 GB Pro 840 - a bit small, but delete put into hibernation and it will do just fine

  Data drive (and Windows cache) = 3 x 256 GB 850 Pro RAID array 0 (Intel ports - SATA III would be great, but even if your MB only SATA II RAID Intel ports very well happen)

  You can use two of WD for storage, backups, etc.

  In Adobe, set the 'other programs' (not Adobe) 6 GB memory if you have a lot of setting cached RAM for Windows disk.

  Many will tell you that RAID'ing SSD is ridiculous, exaggerated, any faster, must have readers separated for reads/writes, blah, blah, blah, etc..

  They are impressive and are really nice with Adobe Premiere Pro.

  Jim

  PS - the 'old' PC, I am writing this email on has a range 0 5 SSD RAID x assembled 3 years ago, and its still humming along pretty well--fast and never miss a beat. My new build has a x 8 matrix RAID 0 on it - Yes, that's an exaggeration, but it must always be well big enough and fast enough for my needs of data for the next 3 years at least

• View 4.0 update number 2 with sophos

  Hi I'm Stefano from Italy,

  I have a problem with my Windows XP virtual machine, in fact recently I installed the new version of the sophos endpoint server, I've updated my master VM and then I did a recompose to update all my VM 40.

  Now, I noticed that all of my virtual machine slowed down when sophos server is online, while the result ok when sophos server is offline.

  Help me please

  Thank you

  Best regards

  AntiVirus in VDI environments can cause a strain on the backend disk configurations and slow down easily in the environment.    Have you read the whitepaper deployment of VMware Vew AV?  http://www.VMware.com/files/PDF/VMware-view-AntiVirusDeployment-WP-en.PDF

• Need help with the disks 'unreadable' configuring software raid after the death of the startup disk and system restored.

  I'm looking for some advice on how to restore a windows xp installation software raid 5 that was running on my XP system. I had a problem when the startup disk has failed, but I was able to backup the system before it can. I replaced the drive and restored the system and everything came, but I was not smart to do this and accidently left the readers connected when restoring raid. I don't know if windows has done something when I tried to install XP on the new drive, or maybe something else has happened when I restored the system from the backup, but my raid drives can not be used. There was a moment in the restaurant business I saw a message on the MBR, but I thought that was just for the drive being restored. I didn't have a single player who held any information on the other disks in the system, but I'm not 100% sure on that.

  When the system boots the windows logo screen takes 10-20 minutes before you get on the desktop. Windows Disk Manager takes 20-30 minutes to fill the list of drives and status on the disks three raid is 'dynamic' and 'unreadable' is not reassuring. I suspect it's a problem MBR or partition table that must be corrected before trying to reactive the raid, but this is just speculation.

  The raid drives are on a promise ide/scsi disk and make it appear to start correctly with names and sizes. After that I get nothing. I do not have another scsi controller (or), but I thought I'd try active @ partition recovery to see if she can find information on the disks.

  I hope someone has some experience with recovery like this, because this is a first for me. I thought I was pretty sure running a raid-5, but wouldn't you know, the tech gods have found a way to crush my plans...

  Thanks in advance for any help!

  Hello

  Thank you for visiting the Microsoft answers community site. Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows XP IT Pro Forums.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Update Win 7 Starter to Home Premium operating system from a hard disk of the laptop with old?

  I have a netbook with Win 7 Starter.  I have an old laptop that the motherboard is dead hard disk.  I would like to transfer the Win 7 Home Premium OS from the hard drive of my netbook.  Since I already own the licence of this OS, is it possible to transfer?

  If Windows 7 Home Premium came preloaded on the old computer where the motherboard is dead, the answer is no. If the Home Premium license is a retail upgrade or full version, then all you have to do is use the key and product upgrade Starter to Home Premium.

  If the Windows 7 Home Premium license you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Starter to Windows 7 Home Premium. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option to enter a key, enter the key of Windows 7 Home Premium, when asked, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Home Premium files the stored settings and programs.