Issue of new generation

Similar Questions

• How to block the new generation of pop ups and "pop-ins."

  He seems to have been a radical change in the design of Web site lately. In particular, it seems to be a new generation of windows that appear after only a certain amount of elapsed time pop up or when we scroll pretty far down on the page. Most are designed to 'pop' on the sides; These usually crept in almost like an animation.

  I have pop-up blocking enabled in FF and I tried some add-ons, but I'm not able to defeat these "features". All advice is appreciated.

  Sorry, these "ins slide" are not related to windows 'pop up' or 'pop-under' of windows. That type of display is done through HTML5 coding. Do not know how this can be prevented, but they are certainly aggravating.

• New generation of PC is installed

  I got a new generation of PC, but it doesn't have an operating system on it then, of course, that I can't load up. I want to know how low load firefox on it.

  Hello, this topic is going well beyond the scope of this forum of support for mozilla products. Please refer to external sources like http://liliputing.com/2011/07/how-to-install-nearly-any-linux-distro-using-a-usb-flash-drive-and-unetbootin.html instead.

• I am able to share my older iPod Touch in to a newer generation aircraft?

  I am able to share my older iPod Touch in to a newer generation aircraft?

  Apple won't give you 10% discount recycling if you put an old iPod when you buy a new. Better off to sell yourself if it works

  Apple - recycling for mobile phones and iPod program

• New generation T vs T61 keyboard (before purchase)

  I had a T. The key on the keyboard, as it is well known, is the best. It was probably a decisive factor for the purchase.

  However, I have read that the new generation of T won't have this keyboard and the tactile has changed.

  Is this correct?

  W machines still retain the T61 keyboard key?

  Thank you

  Mark

  Well, the keyboard is now the island style on all the ThinkPads starting by * 30 series.

  While he feels even better than most other portable computer keyboards, the typing feel has changed.

  The provision has been revised so some T6 * days, so if you're a touch typist you might have some re-learning to look forward...

  Good luck.

• BCCode: 124 on a new generation of system, please help! __

  I have a new generation system, and keep getting a bbc that I fight for the difficulty and I am in desperate need of assistance.  Thanks in advance for any help that you can provide to fix this problem.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 00000000
  BCP2: 864C78FC
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\091410-17640-01.dmp
  C:\Users\Marshall\AppData\Local\Temp\WER-31734-0.SysData.XML

  Read our privacy statement online:
  Privacy statement for Windows 7 - Microsoft Windows

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  ==================================================
  Dump file: 091410-17640 - 01.dmp
  Crash time: 2010-09-14 23:32:29
  Bug Check String:
  Bug check code: 0 x 00000124
  Parameter 1: 0x00000000
  Parameter 2: 0x864c78fc
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 322493
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16617 (win7_gdr.100618 - 1621)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\091410-17640-01.dmp
  Number of processors: 3
  Main version: 15
  Minor Version: 7600
  ==================================================

  ==================================================
  Dump file: 091410-18703 - 01.dmp
  Crash time: 2010-09-14 23:25:48
  Bug Check String:
  Bug check code: 0 x 00000124
  Parameter 1: 0x00000000
  Parameter 2: 0x85afc8fc
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 322493
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16617 (win7_gdr.100618 - 1621)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\091410-18703-01.dmp
  Number of processors: 3
  Main version: 15
  Minor Version: 7600
  ==================================================

  ==================================================
  Dump file: 27187 091110 - 01.dmp
  Crash time: 2010-09-11 17:21:14
  Bug Check String: PAGE_FAULT_IN_NONPAGED_AREA
  Bug check Code: 0 x 00000050
  Parameter 1: 0xffffff8b
  Parameter 2: 0x00000001
  Parameter 3: 0x92a956d5
  Parameter 4: 0x00000000
  Caused by the driver: tcpip.sys
  Caused by the address: tcpip.sys + f9438
  Description of the file: TCP/IP Driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\091110-27187-01.dmp
  Number of processors: 3
  Main version: 15
  Minor Version: 7600
  ===============================================

  I use a triple-core processor AMD Athlon II 440, MSI NF750-G55 mainboard, Corsair xms 2 gig memory, Hitachi Desktar 1 TB disk sata hard.

  Once again, thank you for your help in advance.

  You have a fatal hardware problem :

  Bug Check 0 x 124: WHEA_UNCORRECTABLE_ERROR - This bug check indicates that a fatal hardware error occurred.

  Please copy the files of the dmp to the C:\Windows\Minidump folder first on your desktop, zip dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can look at landfills.

  André

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [1]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  André,

  Thanks for your reply, but I think that I have fixed my problem.  When I built the system, I never could the 2nd strip of memory to work.  It would not just start my system at all.  I thought all along that I had a problem of memory based on my last sentence.  I finally went out and bought another brand memory and did not have a BSOD on the last 2 days.

  Thanks again for trying to help me.

• New issue of motherboard for a new generation of system.

  Hi all

  First turn off the tell me thank you wrongly for his help in me is about to speak of these with the manufacturer of computer re my next major update, without this aid would not be able to take defects/add suggestions for his / my ideal machine. Once again I am your debt. And to the many others who also rang with the help and suggestions for the ideal configuration for editing with CS5 l say thank you to you. My questions now are to do with the motherboard that has been suggested l get and it's the EVGA Classified SR - 2 http://www.pccasegear.com/index.php?main_page=product_info & cPath = 138_711_775 & products_id = 1 4964 that my initial request was for an ASUS P6X58D Premium LGA 1366. What are your thoughts on this please.

  And he put in the mixture a Gainsward 1536 MB GTX 480 l request a card NVIDIA GTX 480 Fermi, can you tell me if there is a marked difference in the two please.

  Thanks for your help.

  Simon Allan

  Simon,

  FERMI FERMI or not? The precise and unambiguous answer is FERMI.

  Remains to be seen if you should go for a Quadro 4000/5000 or 6000 on a share or a GTX 470/480. IMO the Quadro range is expensive, wise basis, but he compensates by the amount of memory. Add to that the complicating factor that you are talking about a two-way with Xeon 56xx CPU configuration (NO i7 - 980) and it is quite possible that the video memory is very important to consider. However, the 4000 with only 256 cores and 2 GB of memory pales compared with a 470 for a third of the price. The 5000 with 352 cores and 2.5 GB seems better, but with an MSRP of about $2,250, it is about 4 times more expensive than the 480, which has many more hearts, but only 1.5 GB. Has the same number of hearts as the nuclei exactly 448 470, 6000, but a 6 GB of memory and an MSRP of $5,000 pay you about $4,500 just to memory.

  Why is the memory so important? Processor Dual configurations are severely hampered by inter communication CPU/RAM and latency introduced by who. This means that if we can reduce the number of transactions between CPU-RAM-GPU-video memory-GPU-RAM-processor and all the time lag involved, the results will be improved dramatically.

  Personally I'd go for a 470/480 to spend savings on a raid controller and drive better Setup. There is nothing to improve in this area with 48 G of memory.

  On a last note: carefully check the memory required on this mobo with dual Xeon 56xx CPU. I haven't checked, but I would be very surprised if she requires NO ECC modules, in which case find ECC DDR3-1600 modules are going to be extremely difficult, not to mention extremely expensive. Same DDR3-1333 ECC is difficult to find at reasonable prices. Remember, you're talking about 4 g sticks.

• Yet an another installation tips - new generation I7 - 5930K

  Hi all

  I am building a new platform for publishing and I need some advice, I'll be happy if someone can look over it and check I don't miss anything.

  View profile

  • Software used
    • Adobe first CC
    • Media Encoder - export to dvd + h264
    • Yet Media - creation of menus
    • AE will be used in the future
  • The 40-minute film editing, loaded with effects (both 1st and 3rd part as the red giant)
  • Images:
    • Currently - various sequences of different cameras I've worked with several photographers video.
    • It is mainly DSLR and GOPRO, and the size is about 100-200 GB per movie.
    • Future proofing - Assembly of the 4 k images

  Pending issues

  • Is it balanced?
  • will it be sufficient for 4 k?
  • Should I buy an additional graphics card?
  • I don't know a lot about the coolers, I appreciate your help with this.
    • At the moment I just took the noctua to the only CPU - I don't know yet, it fits the case
    • What extra cooling?
  • I reuse disks hard 'old', don't you think it's ok? or is not a good place to save. I don't want to create a neck of the bottle after this purchase.
    • OS / software - SAMSUNG 850 PRO 128 GB
    • Work - Raid drive of 2 * Western Digital Caviar Black 1 TB
    • Offline files / backup - 2 * Western Digital Caviar Green 2 TB
    • Scratch disk is the new listed 950 down

  Build

  Processor: Intel Core i7 - 5930 K 3.5 GHz 6 - Core Processor

  CPU cooler: Noctua NH - D15 CFM 82.5 CPU Cooler

  Motherboard: Asus X 99 - DELUXE/U3.1 ATX LGA2011-3 motherboard

  Memory: G.Skill Ripjaws V Series 32 GB (2 x 16GB) DDR4-3000 memory

  Storage: Samsung 950 PRO 512 GB solid state drive m2-2280

  Video card: EVGA GeForce GTX 980 Ti 6 GB Superclocked + ACX 2.0 + video card

  : Nineteen hundred red Full Tower ATX Antec case

  Power supply: Antec 1300W 80 + Platinum Certified fully modular ATX power supply

  The budget was stretched to build this platform, so please, be gentle with your recommendations

  Any help will be MUCH appreciated.

  Edit:

  Should I get off at 5820 & 99 x - a MOBO and add a 2nd SSD for the media?

  Kind regards

  Mehdi.

  I saw the 5820 k markers once overclocked, similar to the k 5930 scene. so for me the upgrade to the k 5930 is only for the pcie lanes. If you're looking for more quickly, 5960 x 8 cores is the next step toward the top, but more than 2 x the price. If you need that performance, I will try to use the as a temporary remnant 5820 k, just to get to broadwell-e 10-core. It is rumored to 2016 q2 release.

  It will cover 4 k edition?  Read this recent post:

  Re: First generation PC - GoPro 4 K video editing with Premiere Pro and AE - Opinions

  One word: glorious! 4K video editing is out of this world. In the source monitor and program videos are played with a 'complete' resolution with zero loss of images. Classification and color of the color correction is amazing also. I can manipulate each parameter and see it change during video playback. The rendering is seconds fast, light for a 2 min clip. The encoding is super fast.

  What to update then?  We can only try to recommend a balanced build based on your projects and media. If you do not have the system and launched, you would be able to see where the bottleneck using performance monitoring programs. first and most of the software adobe for the most part depend on the cpu. Since you have the gtx 980 ti and samsung 950, the next update would probably be the cpu. If the 5820 k is not enough, the next upgrade of processor will the kernel broadwell-e 8-database $600-ish or 10 at the $1 k - ish. the only faster cpu upgrade option for the asus x 99 mbd would be a xeon, but which would be very costly and require an ecc memory. After broadwell-e/ep next gen cpu will require a new motherboard.

• Old iOS that app is improved with a new generation of Air is not verified by the Apple Store because of the limitations of UIRequiredDeviceCapabilities in the info.plist file

  We ordered to upgrade an old iOS/Android app.

  We have developed the new app with Flash Professional CC (Build 15.0.1.179) + Adobe Air (19.0.0.190) for the two operating systems. No problem on Android. Apart from a bit of work by removing the prefix app id air.

  Also construction parts new and several dimmer on iOS was perfectly conducted.

  The issue raised during the passage of the generation of production to the audit. The error returned is

  The APP's info.plist can contain the value of the UIRequiredDeviceCapabilities key that would prevent this app to open on any iOS device.

  After a lot of searching on Google without solutions, we realized that the problem is that the old version of the app has no restrictions of use, while the new! In fact AIR compiler automatically inserts this pair of values in the info.plist file

  
  

  < key > UIRequiredDeviceCapabilities < / key >

  < table >

  < string > armv7 < / string >

  < string > opengles-2 < / string >

  < / array >

  which means the new app cares something and will not let the devices to run itself!

  This two capabilities of our reviews are almost useless as soon as iOS version 7 + (according to the guidelines of our generation) does not require the

  < key > MinimumOSVersion < / key >

  < string > 7.0 < / string >

  in any case it is

  How to remove this key in the info.plist file?

  It is our opinion that Adobe needs to find a solution in the compilation process, because if these required features are mandatory, it is virtually impossible to migrate from almost any old application to the air framework, which seems nonsense.

  Hope someone can help us.

  Thank you

  Luigi

  I finally found a solution for this problem and want to share it here to help all developers have the same problem.

  I have downloaded an application for Mac, called AirSign (https://www.airsignapp.com/), which allows to edit and re-sign .ipa assuming you have good certificates and provisioning profile.

  By using this application, I have delete the unwanted required functions (opengles-2 and armv7) then export to Xcode Archive.

  Then I opened archive with XCode and packed the new .ipa from there.

  Finally, I downloaded the App loaderipa.

  Note that AirSign can repack the ipa, but for some reason, I don't know it is not accepted when downloading with the Application Loader.

  I really hope this can help, and I'm guessing why Adobe is not interested in this problem.

  Ciao

  Luigi

• Several NEW GENERATION BSOD

  I have multiple problems of bsod, I can upload them to anyone who thinks they can help, I tried testing all my gear and even tried several drivers for the question and I ran auditor a few times and I have fixed the issues that came to me for anyone who is willing to give it a shot I need to know what I need to return it for a replacement its closer to the 30-day mark

  https://onedrive.live.com/?CID=C969929ADCDFF457

  Ken

  These related to the atikmdag.sys ATI Radeon driver in Kernel Mode.  I download the latest driver, remove the old and install a new one even if it's the same date because drivers become corrupt

• New generation of PC - system don't gel no bsod - 41 error 6008 event

  Build new PCs - Windows 7 GTX 780 VC - Intel Core i7 4790 - Thermal take TP 850 PSU - Samsung 840BW EVO SATA - Gigabyte Z97 - HD3 - 16 GB of RAM

  Works quite different from 2 random freezes - the two core event 41 power

  First Frost was during navigation - no video, 2nd gel watched stream on Twitch. (newspapers below)

  Q: What could be the error? Defective? Build error? Something else? All up to date on Windows updates after the first frost. Other symptoms weird bloop possible in time (hard disk probably). Is there nothing more to learn about the balls that google don't recount? Appreciate any comment.

  Happy to provide any other information.

  UPDATE: two weeks later following advice to the Board of Directors, I tried to replace the power supply (using Zoltan 850w) and had always the same problem happens with hard locks. You wonder if it's my GC or Mo now. I'm running Furmark for a third time to stress GC again but without tests fail, it's just random at some stage, the system freezes and must be reset.

  Just a message with the permission of you do know I solved my problem (in case you run on people who need help for this problem in the future)

  Problem solved.

  Despite several tests running on all the material system with no failures, the problem was a faulty RAM stick. That's why you probably shouldn't trust a single test as a conclusive troubleshooting. If I had just replaced/tested sticks weeks ago this problem would have been fixed. Thanks for the help and apologies for the silly, easy solution to this issue. The RAM did pass several tests of MEMtest and I be it the determining factor for the crossing of the RAM as the problem.

• Constant stop - 0xF4 on new generation - Windows 7 errors

  Hi all

  I get the BSOD 0xF4 at least once or twice a day. I can boot Windows without problem. It appeared to a next day to up my new build and running.

  I tried to put back all the cards, memory and cables without result. All the drivers appear to be up-to-date. The system has crashed twice now by watching videos on youtube if that helps?

  The last verification error was: 0x000000f4 (0xfffffa800a677b30, 0xfffffa800a677e10, 0 x 0000000000000003, 0xfffff800023818b0)

  Link (via skydrive) minidump files:

  https://SkyDrive.live.com/redir.aspx?CID=8be30cc366a306d7&RESID=8BE30CC366A306D7! 393

  System details:
  CPU: Intel Core i7 2600 k
  Motherboard: ASRock Extreme 3 Gen 3
  RAM: Kingston HyperX 1600 Mhz DDR3 2 x 4 GB (KHX1600C9D3X2K2/8GX)
  GFX CARD: 1280 MB MSI GTX 570 Twin Frozr III
  Primary transmission: 120GB OCZ Vertex 3
  Secondary drive: Western Digital Caviar Black 1 TB (WD1002FAEX)
  OS: Windows 7 Home Premium

  Hello

  Results verified BlueScreenView WinDBG / DumpCHK.
  
  The Bug_Check were all F4 wininit.exe or CAUSE csss.exe which are components of Windows
  which means something else hunt in error.

  BugCheck F4, {3, fffffa800abf8b30, fffffa800abf8e10, fffff800023dc8b0}
  Probably caused by: wininit.exe
  FAILURE_BUCKET_ID: X64_0xF4_C0000005_IMAGE_wininit.exe
  BUCKET_ID: X64_0xF4_C0000005_IMAGE_wininit.exe

  BugCheck F4, {3, fffffa800ac60b30, fffffa800ac60e10, fffff800023868b0}
  Probably caused by: csrss.exe
  FAILURE_BUCKET_ID: X64_0xF4_IOERR_IMAGE_csrss.exe
  BUCKET_ID: X64_0xF4_IOERR_IMAGE_csrss.exe

  ------------------------------------------------------------------------------------------------------------

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
  you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  -----------------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) actually remove and
  replace - do not just tight. On a laptop computer on all you can do is reinstall the memory and possibly check
  the contacts/connection to the hard drive. Memory could be the problem, so if you have more than 1
  stick swap them in and out to see if the problem follows a stick or try the new memory. Antivirus/anti-
  spyware/security programs have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.
  Also check the wiring on the hard drive.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I'm rebuilding my machine because of an imminent hard disk crash, I will be able to reactivate my copy of windows 7 on new generation?

  Well, I recently built a machine using Windows XP, upgrade to Windows 7 Ultimate with a disc of the full version and a key.  The HARD drive is going after only two years.  BIOS AND Windows give me warnings, and I'm a moderator paid for a Web site.  My work depends on the stability of the machine; He needs a reconstruction and a new HARD drive.  I have everything already backed up.

  My question is, since I already activated my copy of windows, is there a way to activate it again on the next generation?  Installation is always on a machine, I just need to be able to reactivate it.  I don't have a lot of time.  A quick response would be greatly appreciated.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Report of the BSOD caused by ntoskrnel.exe on the new generation.

  Hey guys! I recently built a new PC! Everything was fine for a few hours until I had a BSOD. For several days, I get several BSOD. When I use bluescreenview, he said each BSOD was caused by the driver notskrnle.exe (I have no idea what it is). Research in the topic suggested driver problems, corrupted files Windows or bad RAM. I've updated all the drivers that I know and I installed Windows 8 to own, twice. I could really use some help because this issue is frustrating.

  Here are my specs:

  Motherboard: AsRock H170 Pro4S

  RAM: 2 x G.SKILL NT Series 8 GB

  SSD: SanDisk SSD 240 GB more

  PSU: EVGA 750 GQ 80 + gold

  HARD drive: Seagate 1 TB HDD Desktop and WM10EFRX (that's my old HD from my old PC about 3 years)

  CPU: Intel i5 - 6600 k 3.5 GHz

  CPU cooler: Cooler Master 212 EVO Hype

  Graphics card: Sapphire Radeon NITRO R9 390

  Wi - Fi card: TP-LINK TL-WDN4800

  Here are the two most recent dump files:

  https://www.dropbox.com/s/zkmw8edn26pw192/022616-21828-01.dmp?DL=0

  https://www.dropbox.com/s/70gs9vxbkvzo4gx/022616-8828-01.dmp?DL=0

  I appreciate any help you have. Thank you!

  These are associated with atikmdag.sys ATI Radeon driver in Kernel Mode.

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• NEW GENERATION... together... to thoughts and comments appreciated...

  Here, it is the extent of the Ive got with my new build.

  I use CC body daily (subscription)

  Some after effects/Photoshop/Illustrator, but not as intensive.

  I use some plug-ins (Boris, NewBlueFX and S.redgiant Cosmo,..) optical rockets, 3D, other objects

  Windows 7 pro

  I have the Samsung SSD Pro 500g for BONES and Progs...

  I have also 4 1 TB WD black, used for the storage/cache/media/exports and these...

  I have considered doing a RAID, but at this point Im being lazy and do not want to buy a card to support...

  I guess I need a case (big enough to fit the huge cooler noctua)...

  Any reflection on the things I would change, or consider?

  Thank you all!

  

  with everything you've got, you should be able to make a moderate with this easy enough cpu overclock. but you want a good cooler like the noctua and lots of air moving through the case to keep everything cool. you just have to check that the dimensions of the radiator will fit in the case. some heat sinks also have clearance with height of ram issues. You can also go with a heat sink a little smaller and still be able to overclock. If you have accessories lga 2011 for the cooler master this should work, but not good for overclocking, and it has a noisy fan.