Report of the BSOD caused by ntoskrnel.exe on the new generation.

Similar Questions

• Windows 8 BSOD caused by ntoskrnl.exe

  Hello.

  I get a lot of the dreaded BSOD lately.
  From the beginning I thought that it's nvidia drivers. Update of those fixed everything except a BSOD I get.
  Now I get the same BSOD, and it is caused by ntoskrnl.exe and playback memory problems.
  I've been all around you are looking for assistance and use of memtest86 without result.
  The Msinfo32 and .dmp files are located here: DMP.zip 
  Anyone have any idea what may be causing this?
  I couldn't find the RAM that I use in the compatibility table for the motherboard. So that's what I think may cause the problem.
  Any help is greatly appreciated.
  Kind regards
  Arve

  Hi Arve,

  All attached files of the DMP are the bug check IRQL_NOT_LESS_OR_EQUAL (a) .

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high. The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If we look at the call stack:
  
  STACK_TEXT:
  "fffff880 '0335caf0 fffff880' 06a4d817: fffff880 00000000' fffffa80 ' 00000008 fffffa80 ' 12fdbe10 00000005' 00001f80: nt! KeSetEvent + 0x2ad
  fffff880 '0335cb60 00000000 fffff880': fffffa80'00000008 fffffa80 '12fdbe10 00000005' 00001f80 fffffa80' 1458a6a0: MBfilt64+ 0 x 1817
  fffff880'0335cb68 fffffa80'00000008: fffffa80 '12fdbe10 00000005' 00001f80 fffffa80 '1458a6a0 fffff800' 9bc62d4c: 00000000' 0xfffff880
  fffff880 '0335cb70 fffffa80' 12fdbe10: 00000005' 00001f80 fffffa80'1458a6a0 fffff800 '9bc62d4c fffffa80' 1458a6a0: 0xfffffa80'00000008
  fffff880 '0335cb78 00000005' 00001f80: fffffa80 ' 1458a6a0 fffff800 '9bc62d4c fffffa80' 1458a6a0 fffffa80 ' 1458a6a0: 0xfffffa80'12fdbe10
  fffff880 '0335cb80 fffffa80' 1458a6a0: fffff800 ' 9bc62d4c fffffa80 '1458a6a0 fffffa80' 1458a6a0 fffffa80 ' 12fdbe10: 0 x 5 ' 00001f80
  fffff880 '0335cb88 fffff800' 9bc62d4c: fffffa80 ' 1458a6a0 fffffa80 '1458a6a0 fffffa80' 12fdbe10 fffff880 ' 02fc9f00: 0xfffffa80'1458a6a0
  fffff880 '0335cb90 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! ViPendingCompleteAfterWait + 0xc4

  Cannot load the image MBfilt64.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for MBfilt64.sys
  ERROR: Module load completed but symbols can be loaded for MBfilt64.sys
  Probably caused by: MBfilt64.sys (MBfilt64 + 1817)

  ^^
  Driver Realtek HiDefinition Audio (referred to as Creative Audio Driver file).

  If we run a lmvm on your:

  4: kd > lmvm MBfilt64
  start end module name
  fffff880 '06a4c000 fffff880' 06a5a000 MBfilt64 T (no symbol)
  Loaded symbol image file: MBfilt64.sys
  Image path: MBfilt64.sys
  Image name: MBfilt64.sys
  Timestamp: Thu Aug 30 23:40:32 2009 (4A7267B0)

  ^^, Yours is dated 2009 ~ The most recent is AFAIK as early as September 2013, via - Realtek site

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  To update this driver as soon as POSSIBLE.

  -----------------------------------------------------------

  In addition, to provide peace of mind regarding your request of RAM. If you receive a card mother and they have a list of the RAM compatible in the manual, etc., this is called a QVL (qualified suppliers list). It is simply a list of RAM which has been tested internally and is PROVING to be quite compatible 100%. If the RAM is not on the list, it is not by all means, implies that the RAM will be inconsistent and cause problems. Actually today is very rare. Your RAM doesn't seem to be the issue at all in these accidents.

  Kind regards

  Patrick

• BSOD caused by ntoskrnl.exe - bug DRIVER_POWER_STATE_FAILURE

  Hi all

  I'd appreciate help with my laptop problems I don't know neither the cause nor the solution...

  For several months, my laptop refuses to close directly. I explain: when I want to stop it, any reboot my laptop and I have to stop him again so he can actually stopped. In addition, at each attempt to stop / restart, I have this incredible Blue Screen of Death for 15 to 20 minutes, then my laptop actually restarts. Once it has restarted, it works normally for 3 minutes and then freezes for a duratation ranging from 5 min to 40 min...

  In addition, since the beginning of these problems, my laptop detects no USB devices (mouse, external driver...)...

  Please help me, this situation is driving me crazy...

  My laptop is an Asus ux32v and runs on 64-bit processor - i5 3317U and Windows 8 (if it helps).

  Here is the link to my minidump files:

  https://www.dropbox.com/sh/ix3bf3v7aog2xz5/AAAcgX3yNBDWVAj5JXs9JNzSa?DL=0

  I tried to open these files with software like BlueScreenView but couldn't do much about it. What I realized is that it was caused by ntoskrnl.exe.

  Thank you in advance for your help!

  MS

  It is possible because you do not remove it completely.  He was always loaded into the current DMP file

  You do not update to win 8.1.  I'll wait until you do.

• How to block the new generation of pop ups and "pop-ins."

  He seems to have been a radical change in the design of Web site lately. In particular, it seems to be a new generation of windows that appear after only a certain amount of elapsed time pop up or when we scroll pretty far down on the page. Most are designed to 'pop' on the sides; These usually crept in almost like an animation.

  I have pop-up blocking enabled in FF and I tried some add-ons, but I'm not able to defeat these "features". All advice is appreciated.

  Sorry, these "ins slide" are not related to windows 'pop up' or 'pop-under' of windows. That type of display is done through HTML5 coding. Do not know how this can be prevented, but they are certainly aggravating.

• Using the old version of Pages on the new generation of MacBook Pro

  I like the old version of Pages and just bought a new MacBook Pro computer.

  I want to buy the old Pages software, but I'm not sure if the old version running on the new computer?

  It can work - see here

  How to return to Pages ' 09?

• Slate 7: how to get the new generation v1.05.7_user

  I already posted a problem before ""slate 7: common and other: the text size too small".

  I have the version V1.05.6_user

  but on a slate 7 with build v1.05.7_user the problem does not exist

  == > How can I get the new version?

  Build v1.05.7_user was delivered this morning on my slate GREY 7

• X 200 Tablet - BSOD caused by tsmservice.exe

  Hello community,

  I got a Lenovo

  X200Tablet 7453BD5

  BIOS to. : 7WET71WW (3.21)

  I installed an SSD on my laptop. I installed Windows 7 top (more than 5 times), the old operating system is Vista on the embedded laptop computer.

  The software that is causing the BSOD is the 'TabletSVC' service / 'TABLET Service' with TSMService.exe performance. If I stop the service or even can not start it automated with Windows. I have no problem with blocking down (restart, hibernate, power off) within 15 seconds, the laptop is turned off.

  If the service still works I see probably blocking it to the bottom of the window for all feeled 10 Minutes until it shows me a BSOD.

  What I tried in the meantime. Installed another version of the Menu Popup Tablet-> [URL =http://support.lenovo.com/de/de/products/laptops-and-netbooks/thinkpad-x-series-tablet-laptops/think...

  Tablet of contextual Menu [url].

  I also installed the system step by step on the lenovo system update, so I saw what has caused the problem. Now I use a shortcut on my desktop that net stop 'Tablet of Service' and a stop. It is functional but not nice.

  Someone had / have this problem? And have a solution for this?

  concerning

  Norbert

  During this time, I got an update for the PM Driver on the windows update. After that, I tested the functionality of the service without stopping it to stop. Everything works fine now.

• BSOD caused by ntkrnlpa.exe

  I recently get BSOD screens after the release of the standby mode. I don't know what is the cause, but the computer mentioned a State of driver failure.

  System: Windows Vista 32 bit home premium
  Motherboard: Asus P5ND2-SLI Deluxe

  I joined four of the most recent minidumps.

  http://www.mediafire.com/file/wy4gje1zyny/Mini011310-01.dmp
  http://www.mediafire.com/file/iqgzni1zhzz/Mini011210-02.dmp
  http://www.mediafire.com/file/nwj2knjzme4/Mini011210-01.dmp
  http://www.mediafire.com/file/nkjjueczzjq/Mini011110-01.dmp

  Hello

  Please ask and try the following fix:

  KB972109 - does not end the shutdown process, and you receive an error message on a computer that is running Windows Vista or Windows Server 2008: "Stop 0 x 0000009F "

  This update updates the generic MSFT USB drivers. Resolve the problem?
  André
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• BSOD caused by ntoskrnl.exe (and maybe hal.exe?)

  Hi all

  I don't have much experience in debugging BSOD minidumps so I turn for help. Attached all my files dump in time past. All caused my computer to turn off instantly, of course, sometimes it turns even off exactly when windows loads. From the little I know, I think maybe it's a hardware failure (0 x 124), but I'm not sure. Any help would be greatly appreciated.

  Here is the download link: MiniDump

  Thank you very much for any help!

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names. (Also update BIOS and)
  drivers chipset on the site of the constructor/the system motherboard.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• What are the specifics of the malware Facebook reported in the New York TIMES on August 26, 2013 column of Bits?

  Here is a link to the article:

  http://bits.blogs.nytimes.com/2013/08/26/malicious-software-poses-as-video-from-a-Facebook-friend/?NL=todaysheadlines & EMC = edit_th_20130827

  According to this, Firefox can be infected and typical of virus/malware programs are not effective to deal with the problem because blocking them malware.

  I was looking for an alert or specific discussion.

  Hello, it is probably important to add that this malware is spread using a vulnerability in chrome or firefox but by social engineering and by encouraging users to install malware under a false pretext. that in itself is not something unusual and happens all over the web all the time - the vector of infection seems to be very effective, however, since you are more likely to install something from one of your social contacts from a site randomly (which could claim a download is necessary because it lacks a plugin or by impostoring false update notice).

  If it really is only hanging in firefox as an add-on it should be fairly easy to remove - just press the SHIFT key while lance firefox to access safe mode, go to firefox > addons > extensions and delete something that seems suspicious and you have not added manually: Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems

  If your system has been compromised, it is also important to change all your stored passwords...

  Fix Firefox problems caused by malicious software

  Edit: the addon in question has already blocked by mozilla: https://addons.mozilla.org/firefox/blocked/i444

• After the update yesterday Creative cloud the process of NŒUD. EXE is consuming CPU (25%) is that part of the new generation of the creative cloud?

  It's a PC, after the update, the process of NŒUD. EXE is consuming cpu resources, is this another bug?

  Please check power or High CPU use when Adobe Creative Cloud is idle on Mac OS 10.11

  Concerning

  Stéphane

• How do I deploy forms and reports in the new upgradation of OAS?

  Hi all
  
  I have a request. I have Oracle Application Server - 10g release 1.
  Now, I've updated OAS 10 g release 2.
  
  1. What are the steps necessary to deploy forms and reports that newly installed OAS?
  
  2. do I need to recompile all the FMAS / MMB / PLL etc.,.
  
  4. do I need to put all the files as the conf file, EPS file?
  
  3. are there documents if you please provide links?
  
  Thank you all
  SAI
  
  Published by: user12045030 on August 24, 2010 06:58

  N ° you must recompile the .pll, the .fmb and the .mmb

  François

• DeskJet Ink Advantage - the new generation of affordable printing

  See the link below for more information on Ink Advantage printers

  http://h41112.www4.HP.com/campaign/ink-advantage/EMEA/en/originalhpink.html

  • DeskJet Ink Advantage 2515
  • DeskJet Ink Advantage 3515
  • DeskJet Ink Advantage 3525
  • DeskJet Ink Advantage 5525
  • DeskJet Ink Advantage 4615 / 4625

  

  

  

• Change startup disk 'C' to a ' on the new generation.

  I have a new version with Win 7 64 bit on a small (64Gig) SSD with a 1 TB hard drive. Is it possible swap the drive assignments of letters between these two discs, which was the start-up of the PC of the ' SSD drive?  I would do this to save the little room for manoeuvre on the SSD to have default installation programs on a small space. As you know, many installs does not give you the option to select the installation path.  Thanks in advance for your answer or any socioenvironnemental that produce the same results.

  You cannot change the boot on Windows drive letter designation, it will not allow him.

  I tried and it won't work.

• Coming new Win 7 install - what do I need get LR installed on the new generation?

  Hello

  I've been a LR user since the pre version 1 days when Pixmantec came on board. Most recently updated my 3 license and am under 3.2 currently.

  All my installations were on the same PC (XP).

  I'm building a new PC which runs to Win 7 Ultimate 64 - bit. The building will have new drives (2 SSD drives for the OS/applications, work space and a HARD drive of 2 TB for storing RAW/TIFF - backup will be an external 2 TB HDD).

  Because this will be a completely new installation and not an update, do I need to contact Adobe to get installed LR in advance? I have all the old configuration files for versions 1, 2 and 3, as well as my original buy e-mails received and activation numbers.

  Thank you

  Dave M

  Just download a copy of LR 3.2 and install it. Use your serial number, LR will also ask you for your serial number for LR 2 If you made an upgrade. There is no activation for LR and you are licensed in two separate facilities. No need to contact Adobe... Each new version of LR, including releases of dowry is a complete application in itself, and older versions are not necessary.