Issue of Reader preferences, ok button?

Similar Questions

• Cannot find the rip in reading or library button in Windows Media Player 12

  Original title: no rip button

  When I open media player I don't see the rip in reading or library button

  I tried to copy a cd on my new desktop PC and computer laptop windows 7 OS. The CD I'm tearing a 75 WMA format songs on this is a different procedure to do? When I open the drive I get no burn button or option button

  There is no need to rip data CDs containing MP3/WMA files. You can just browse the CD with Windows Explorer and drag and drop the files in your folder of music . WMA songs will automatically appear in the WMP library. Tim Baets
  http://www.BM-productions.TK

• Photoshop CC 2015 30 seconds + SSD boot caught up on 'reading Preferences.

  Hello I am currently using an i7 retina Macbook Pro 2.3 GHz, 16 GB memory DDR3, NVIDIA GeForce gt 650M 1024Mo

  CC of Photoshop is taking approx. It takes about 30 seconds to load and gets the brand "Reading Preferences" after only a few seconds. So, it hangs at 'Reading Preferences' for another + 25 seconds.

  I have no plug-ins. I completely did a new install of Photoshop CC without saving the presets, I have my change of graphics turned off on my MBP, I disabled the font previews and validated my fonts using the font book. I uninstalled all previous versions of Photoshop, I had installed. I'm still lost.

  I can open Photoshop and it will take 30 seconds... Immediately close and reopen and there about 7 seconds... Close again and it goes back to 30 sec...

  I have the same problem on my new iMac that has been cloned to my MBP.

  ryanb67626676 wrote:

  Where's the Photoshop preferences file user ID?

  I don't use a mac this is what I found from Adobe site.  CC 2015 should be the mear where 2014 is now 2015.

  Preference file functions, names, places | Photoshop CC 2014

• Launch of slow Photoshop on 'reading Preferences.

  When launching Photoshop CC 2015 it takes a few seconds to load brushes and other settings, but then it stops on 'Reading Preferences' for 1 minute.

  Tried to reset using Ctrl + Alt + Shift on the launch preferences, by checking the damaged fonts, deleting and disabling extensions and lowering number of brushes.

  It did not help.

  Any suggestion?

  Thank you.

  I discovered removing folder settings Adobe Photoshop CC 2015 solves the problem.

• Headphone issues and options grayed out reading preferences

  The basic problem is that when I play music via iTunes, if I plug my headphones, it covers only playback through the computer speakers, not headphones.
  If I closed iTunes, plug in the earphones, THEN restart iTunes and play music, it will come through the headphones, but if I unplug, it is paused and not restart, even if I plug the headphones insert it again.
  Although I can change speakers headphones by stopping iTunes and restarting, I'm often trailing long playlists, it is not practical to do so.
  Other advice, it seems that I have to change the "audio playback" setting using "Session of Windows Audio' 'Direct Sound', or something similar, HOWEVER, when I go in Edition > Preferences > reading, the box is grayed out, and I can't change it.

  Any advice on how I can do so I can change the option, or any other fixes for the problem of helmet? Thank you very much

  (Running for laptop HP with Windows 8.1, iTunes 12.5.1.21,

  Installed new hard drive and reloaded the operating system on June 16, i.e. when the headset/speaker turn is more, before, and then it worked fine.)

  Have you found a solution? I've just updated to iTunes 12.5.1.21 and I have the same question, ' Edit > Preferences > reading > play Audio using the "gray

  Direct Sound is the vastly superior choice if you have several outputs such as speakers and headphones and now if have to stop iTunes whenever I output to the speaker.

  Apple bring back this feature.

• Question of Adobe Reader preferences, text stretched and zoomed in.

  I a user with Adobe Reader 11.0.2 installed and cannot change its preferences and always receive a prompt "Screen reader" at the opening of a PDF file.  The window is stretched across the screen and the only way to close it is Tab - enter.  Preferences are the same way, theres no way to verify the settings, because the window is zoomed too and the text is too large. I already tried to uninstall and reinstall, deleted all the files and reg key to do a clean install as well as under several profiles. Same question every time.  Anyone else see this issue?

  

  Any advice would be great.

  I think I've seen it where a Windows essential police is removed.

• Info on reading missing bar button

  In Captivate 5 documentation it is said that an info button is visible on all the bars reading.  This "info" button would display the project information provided that the information has been added to the preferences.

  However, no matter what I do, I can't get the information bar to display on any published project.  I currently publish as a .exe file.   What I am doing wrong?

  Thank you

  Marcel

  Well I thought I'd try anyway and found it works.  I copied the models of Captivate 4 folder and place it in the Captivate 5 installation directory (renaming the template folder C5) and I was able to publish my project with the information button using the default playback bar.

• Qosmio G35 - 600 - card reader and control buttons do not work

  Hello

  So I recently installed windows XP on my Toshiba Qosmio G35-600 and I found all the drivers except two. If someone out there could help me find this would be great.

  (1) the first driver, I can't find is for the control of Toshiba above my keyboard buttons (I think that's what they are called). Quosmios have 12 buttons on the top above the F keys and currently only my power button, the brightness keys, up and down and the keys sound dolby work. The key analog TV, the Media Center button, play, stop, previous, next, check-in and s-video, the buttons do nothing more. It would be cool if I had again a s-video on the ability, but above all I want is the previous play and next buttons to work.

  (2) the second problem I have is with my built in SD card reader. A few times I thought I found the right driver, but after installing the SD card was not appearing in my computer.

  A pre-emptive thank you for the help,

  Xamboni

  Hello

  On the U.S. Toshiba download page, you can find drivers Windows XP Home (link given by Luc). I think you're missing Toshiba controls for Windows XP (don't forget the common modules is installed first) and Texas Instruments PCIxx21 FlashMedia driver for the card reader.

  Is a device in the Device Manager listed as unknown?

• Reading of option buttons

  Hi all

  I write a big program in LabVIEW and one aspect of it is a structure of type quiz. There are 4 possible answers to each question (a, b, c or d) that correspond to a cluster of 4 radio buttons. The quiz questions and answers are stored in a table. The table contains 5 columns; the first (0) contains questions and columns 1 to 4 contain the four possible answers. The fifth column is a number corresponding to the correct answer either 1 = a, 2 = b, etc. To verify whether an answer is correct, when the user clicks on the button 'NEXT', the option boxes are read. If the answer is 'a', a "1" is released, if it is 'b' a '2' came out etc etc. This output is compared to the fifth column of the table, and if the two match, TRUE is output, light a LED. However when I run my program it doesn't let me choose a response, i.e. one of the option buttons, even if I have a while loop.

  The program is much more that this whole quiz aspect it is a little heavy to post. I have included a screen screen below which may help (but can also confuse more!).

  

  Thank you!

  Your diagram, I see 'Radio buttons' is an indicator, not a control.

  To select an option, you will need to make this control.

• Another type of MTP issue I read here

  need information: Sansa Fuze 4 GB version 02.03.31A using the MTP, info PC mode: build self system, XP home SP3, WMP 11.  CPU AMD FX 60 2.6 Ghz, 3 GB, ATI gfx card ram

  Problem: The mode MTP and WMP 11 worked fine several weeks ago. As sync playlists, load mode MTP, PC also detected in MSC mode.  No problems.

  Recently, when I plug the Fuze MPT mode, I found new hardware balloon "sanza fuze" then it turns into MTP device then he said: ' your material has been blocked, but you must restart the pc or it may not work properly.

  So I reboot (the made with rocket plugged upward in and out in MTP mode) I get the new ball of material found again.  I check the Device Manager and see the "rocket" listed in portable devices, then renamed it to MTP device.

  To end up with one brand yellow when he tells me to restart the pc.  If I check the properties at this point, there is a code 31 "windows cannot install device because you have to restart the pc.

  Reboot, even sung and danced.    Windows still detects of Fuze in MSC mode, very well.  WMP 11 never know same here if in MTP mode (because never really settle the rocket)

  How to complete the restart installation I guess that could be the main issue, then I expect WMP to pick it up.

  What I tried: after reading these fourms and searching the Web I have:

  1 reinstalled WMP 11 (does not solve the issues)

  2 installed microsoft MTP Kit (does not solve the issues) portage

  3 hook of rocket for a Pc HP using the same cable and WMP 11 picked up very much like "Sansa Fuze 4 GB" and installation of synchronization begins.

  4 formatted fuze and tried on my PC (does not solve the issues)

  5 Ran win xp SFC (System File Checker) to start / run / guest. (took about 25 minutes) always the same questions.

  6. system restore to a few days ago.   (does not solve the issues)

  7. probably some other things I've forgotten and the list above is not necessarily in the exact order.

  I read about the monkey thing and some on Winamp, but I really want it works as it should just like he did on the machine with WMP 11 HP, just as he has done on this pc a few weeks ago.

  Which might be of importance: got in trouble with the old creative soud card and had to try to remove completely. still an unwanted software here I don't know, but I got most of it.

  Went from xp SP2 SP3 and a lot of updates to Ms.

  can't think of anything else, sorry to be so long, just that you stay up to date on the situation.

  Thank you

  Mark

  OK Tom, I'll give it a try and post back with the results.

  Thanks for the find

• Photoshop CS6 gel on 'reading Preferences.

  I use Creative Suite CS6 and have a problem where Photoshop will not load. What happened only since this morning and I haven't downloaded or changed something (that I know) since the last, I used the program yesterday.

  I read a tip suggesting pressing cmd + alt + shift while the program's start-up and clicking Yes to reset/clear the preferences but it did not work.

  Can anyone suggest anything else I can try?

  Thanks for your help... I rang Adobe who apparently do not have phone support for products of CS (a bit frustrating), so I then talked to our companies IT helps who found this: Photoshop Tip: how to preferences - Photoshop - macProVideo.com to reset Photoshop Hub

  I had to use finder, go (top toolbar), navigate to the folder, type/users/yourname/library, then navigate to the folder Preferences

  Then, find the folder of photoshop cs6 and delete everything in this folder. When you open photoshop, all rewritten preferences themselves (if you have kept the window of finder open at the same time, we saw all the elements reappear in the folder)

  I hope this helps someone else who may have had the same problem!

• Known issues of reader 7.0.7

  As part of our product documentation, I would like to ask for some information on Adobe Reader 7.0.7 we used.

  Could someone give me a list of the issues/problems known at the time of the release and the problems discovered since version?

  I doubt it very much. Since Adobe have corrected and revised several times in Reader 8, 9, 10, 11, and DC.

  You can report that it is obsolete, unsupported, end of life and he will surely understand unfixed security vulnerabilities.

• make form fields read-only without buttons

  Hi, I want to make my form fields to read only using JavaScript. I found codes below and it's work.

  My problem is, I do not read only buttons. I send button on my form. Offer other than the button

  others all the fields I want to make read-only... so please help me to do it. Thank you...

  do all the fields in a form read-only;

  var oField; variable field processing;

  Browse the form fields;

  for (var i = 0; i < this.numFields; i ++) {}

  treat each domain name;

  oField = this.getField (this.getNthFieldName (i)) .readonly = true;

  }

  PDF form javascript to read only field using the button

  This code is a little strange. Use it instead:

  for (var i = 0; i < this.numFields; i++) {
      var oField = this.getField(this.getNthFieldName(i));
      if (oField.type!="button") oField.readonly = true;
  }
  

• Issue using 'Next' and 'Back' buttons on a slide.

  I have 4 paragraphs I want to display on a single slide. To progress, the player selects the button "next". Each paragraph has a 'Next' and a 'Back' button to allow the reader to go any direction and read or reread the material. Once selected the last button 'Next' button 'Continue' ('Let's Take a Closer Look") is set to appear. The "Continue" button should be the only button that allows the reader to go to the next slide. However, once the buttons 'Next' have been selected several times, the blade continues to work and goes to the next slide. Each button Advanced assigned Actions. I can download these images as well. Because now I downloaded an image of Action Advanced 'Next' button and a 'return' image of the Advanced Action button you can see how I course set up.

  

  First paragraph

  

  Second paragraph

  

  Third paragraph

  

  Paragraph of Forth

  

  Chronology

  

  Button Next tip Action

  

  "Back button" tip Action

  Hello

  Have a working example. I created four containers of text T_one, T_Two, T_three, T_Four and grouped in Gr_T.

  Created a v_track variable user, with an initial value of 1 (because the first text is visible when starting)

  Created Bt_Next (visible) and Bt_Back (initially invisible) buttons with a break point at 1.5 sec (later will be for you if you want to first allows you to hear the audio clip).

  Created the Bt_Cont (invisible) button with a break at 2 sec (later than the other two).

  Here is the chronology:

  

  For the next button, created a conditional action advanced with three decisions. Here's the first, which must be the first (logical) decision and when the third legend is visible, v_track = 3:

  

  You can send me a private message with an email address if you want to see the others.

  For the previous button, sequence is reversed, here's the first:

  

  Lilybiri

• The messages of 'Reading' is not in the Inbox, although "No read" quick filter button is not down.

  I clicked on 'Unread' in the quick filter, then it décliqués, but I can see is more thousands of messages to 'Read' in my Inbox. That is what it is?

  Check the display menu (alt + V) > discussions is set to all.