Qosmio G35 - 600 - card reader and control buttons do not work

Similar Questions

• Qosmio G20: Media FN and control buttons do not work with XP

  Please I need help as its brightness full stuck on and my eyes hurt... lol... no jokes, it's really bad.

  I rang the guys TI and they give me just a website, but they don't tell me which driver.

  I downloaded the Qosimo drive driver, but I don't know how to use it.

  Please help me some1... as soon as possible...

  Hello Franz,.

  As a first step, install the Toshiba commom modules, from here:
  http://www.rabayjr.com/Vista/drivers/commonmodulesxp.rar

  then install toshiba controls, from here:
  http://www.rabayjr.com/Vista/drivers/controlsxp.rar

  After that, you will probably work of toshiba buttons.

  For the Qosmio player, you must burn it the image that you download from the website of toshiba on a CD.
  After that, put this CD in your Qosmio, press F12, select Boot CD key and install it.
  But remember, THIS IS IMPORTANT: If you install the Qosmio Player, this will reformat your hard drive and lose all partitions of HD and data, as well.
  Normally you install Qosmio player before installing Windows XP, media Center, Vista. etc...

  Take care
  Francisco

• Qosmio G30 - 126 monitor become black and FN buttons do not work

  Hello

  I have small problem, ehm two problems, but may be small for you :)

  Last week, I install Vista ultimate WITHOUT RECOVERY CD...
  It's OK, but I close the cover of the book and instantly open, monitor become black and I can't do anything without restarting.
  In the Panel in feeding opportunities, bookmark 'options to close the cushion' does not work.

  Maybe it's by, because I'm not driver if exists

  And second problem may be linked with the first, but it is a mistake, because I was not discover drivers because I haven't hidden toolbar on the back Windows, where standartly is on-site.

  I don't work much hidden functions under the FN key (I think that FN + F2, F3...) F12) most keys be the side POWER without multimedia keys on the music...

  Thx for the help!

  SRY for my bad English

  Post edited by: Martiosso

  Hi Martin

  First of all it s interesting if you have downloaded and installed all the Toshiba Vista drivers that are published on the European driver Toshiba page?
  All drivers must be installed in the correct order!

  If I'm not mistaken the Qosmio G30 - 126 belongs to the series of PQG32E. It was delivered with HD DVD player, and therefore, you should choose the drivers for the Qosmio G30 HD DVD (PQG32E)!

  Please first check the file txt Instructions of Installation, and then install all the drivers as mentioned in this document.

  With regard to the issue of the display;
  You need to install the correct driver NVIDIA of the Toshiba page!

  The keys FN and control buttons don t work because the Vista Toshiba value added Package has not been installed. This package contains applications that are needed to get all the features of Toshiba running!

  Good luck

• Tab and control keys do not work in Firefox (they work in other browsers) AND I went to a new keyboard.

  Tab and control keys do not work the browser Firefox (my browser is up-to-date). The buttons work in IE and Chrome, however, until I realized that, I even changed my keyboard for a brand new, hoping that would solve the problem.

  Hello arlusk, the problem is probably an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Adobe Reader and Flash Player do not work.  I tried to download, but keep receiving a r

  Adobe Reader and Flash Player do not work.  I tried to download, but continue to receive an answer that I already have a newer version.  But it does not work if I have it.  Have you looked at my programs and it is not listed.  Help please!

  What is your operating system & version?

  For Flash Player, try a new installation as described in http://forums.adobe.com/thread/928315

  For Adobe Reader, I need to know your OS.

• Vista on Qosmio F20: SD card reader and Media Player keys do not work

  I recently updated my Qosmio F20 for Vista.
  I got most of the job functions, but my SD card reader and fixed keys for media player still haven't.

  I can't find the drivers for them (I don't think they exist for a F20) so I was wondering if anyone had a solution.

  Thank you

  Hi faarn

  You can't find the Vista drivers as Vista don t drivers is on the page of Toshiba. Some people have posted a link to the official document on the units of Vista support and the Qosmio G and F20 was not on the list.

  But another clue. Check the drivers in another series as F30 or G30. But the chances are small that the pilots will run

• Qosmio F30: Toshiba control buttons do not work on Vista 64 bit

  Hello everyone

  I have Windows Vista 64-bit installed on my Qosmio F30, but before operation buttons do not work.
  I tried to use the 32-bit configuration of Vista drivers, but when I press it, I got the following error: "this function not taken in charge.

  So please can someone help me to overcome this problem.

  THX

  Hello

  You cannot use these Toshiba control buttons (play, pause, etc.) because the necessary drivers are not installed.

  You will need a compatible Vista value added package, but it seems that Toshiba page does not provide the 64-bit VAP but only the 32-bit version.
  The problem is that the software for Vista 32 bit does not work on Vista 64 bit OS.

  In my opinion so there's nothing to do right now

• Satellite A660 - touch pad / stop and other buttons do not work

  Dear people on this forum,

  Recently, about 3 weeks ago, I turned on my computer and I cleaned out the dust because it was overheating.

  about 2 weeks before, I noticed that my touchpad is not working and the buttons at the top of the page do not work, there is no light (multimedia audio buttons wireless) I can't activate/deactivate or either, I don't know how. I don't know if the problem because I cleaned my laptop and has not logged a few threads back but I included this detail because I do not use these buttons if I haven't noticed if they were on. but he said: 2 days ago, I don't know how my wireless exploded Ant when I press fn + f8 (wireless) wireless communication switch is turned off, which is one of the buttons is not working (upstairs next to / switch even with my touch pad)

  I tried the following:

  Windows Update
  turn off the computer, remove all cables and battery and wait for about 30 minutes. Then then hold down the button for 30 seconds
  Reinstall the support flash cards, hw Setup utility / value pack
  and finally a Toshiba out of the recovery of the box using the recovery of 2 cd product

  I don't know what to do next. It's either:

  try something else
  or is there a wire is connected both touchpad and the buttons at the top and I have to open my laptop and connect them.

  Please answer as to my next step to get my wireless.

  Your dear member of the forums, kaujis

  Post edited by: kaujis

  Please don t get me wrong, but I don t know how to help you now. Disassembly of the laptop is to only authorized persons and if you do it on your own there is always a risk that something may be hurt or may be damaged.

  OK, I must also say that I also removed my machine too but I got lucky and everything is OK as before.
  I put t know how A660 looks inside, but the principle is still the same and I can't imagine you have whatever it is damaged.
  You know very well that we cannot say much about your problem. What you need to do now is the final test of functionality and install original recovery image that you got with your laptop. Test the functionality with the factory settings. If the problem is still there, I m afraid you must open for new laptop and check if everything is connected correctly.

  Last option is to contact the service and ask for help.

• Satellite P20: Fn + F5 and TV-button does not work

  Satellite P20, keyboard of Windows XP SP2 problem.
  When I press Fn + F5, the computer does not show that earlier the different display options. TV button does not work also. I can change the different views with my nVidia Display Driver.

  My keyboard is OK, there is no dust or liquids. I have the latest update of the BIOS and Windows XP Service Pack 2. What program controls the functions of the keyboard in this case?

  How do I fix this problem?

  Hello

  Of course, you have deleted something or preinstalled on your own operating system. Without Toshiba has designed tools and utilities, it won't work. I put t know exactly which of them are to do this, but please try to install keys Dritek easy button util. /Sticky V1.008, E - key utility and Toshiba Hotkey Utility.

  I hope this will help. If this isn't the case, please write again.

• Satellite U500 - 1 8 - eco and touchpad button do not work

  I had to update my Windows 7 Profesional version and now I have some problems:

  1. I installed eco utility but when I press the single button of co control nothing happends
  2 start/stop pad touch button does not work (not as important)
  3. when I press the fn button context menu? (the bar at the top of the screen with shortcut explanation)

  I looked on the toshiba site, but can not find good files someone help me?

  Thanks in advance

  Hello

  In my opinion, you must reinstall Toshiba Value added Package and the Eco utility. All utilities, you can get on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  So I agree with the user above the reinstallation of this tools, everything should work properly again.

• Headphone control buttons does not work

  Hello

  I just used my V - Moda Crossfade LP to listen to the music and tried my control buttons. They do not work so I tried a few Ks AKG and buttons do not work also. Do I have to download an app or?

  A solution would be really nice!

  Hi Chris9292,

  As far as I know, these models are manufactured for Apple devices. There could be some compatibility issues at a Xperia device with buttons and the microphone. For example, if you click on the following link:
  http://v-Moda.com/crossfade-LP/

  They include the following: cable microphone 3 remote buttons control calls and music, as well as the volume on most smartphones and tablets, including the latest Apple devices, including the iPhone, iPad, iPod and Macbook (only compatible with Apple products volume)

  A third party may be accessory need more power than the phone can provide some. (If possible), I suggest that you connect Sony headphones to use this device to see if you encounter the same behavior.

• Satellite U500-1F5: eco and FN buttons do not work after BIOS update

  Hello world

  I hope I can find a solution for my problems here.

  I bought a new Toshiba Satellite U500 (PSU9ME),
  I'm updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center.

  Last week I received an alert to updat the BIOS and I did. Since then, I've noticed the following problems:

  1 eco utility does not work, and when I tried to uninstall, it says (not supported BIOS)
  2. on screen funtion buttons that appear at the top of the screen when you press the Fn key no longer not apear
  3. the touchpad lock / unlock button does not work, and even by pressing Fn + F9 doesnot lock

  I hope you can give me an answer about my problems,
  I already downloaded the latest updates for the eco and value-added packege of the toshiba site and install,

  BUT

  does not my prob

  still eco utility does not work. The msg (not supported BIOS), appear when I run the update.

  The bar of buttons on the top of the screen does not (even after I uninstall the package of value of toshiba and re - install the last being) and the locking/unlocking back touch button does not work.

  I hope Toshiba can find me a solution, coz I don't have time to go to the DEPOT
  PSU9ME00D00XAR model U500-1F5

  Windows 7 (64)

  Thanks in advance

  Hello

  First one comment:
  * I am updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center. *
  That s is nice, but certainly not necessary. When the system is working, do not touch or change anything. Maybe stupid sounds now, but I recommend you to remove the TEMPRO system. Believe me you don't need. I have 2 years old Satellite A300 and original BIOS. It works perfectly and I don't want to take any chances and to change what anyone. Since last month, I have the Satellite U500-1EX and will do the same. TEMPRO is already removed, and I am happy with the factory settings.

  All that you have done is OK, but at least you can try to reinstall entire OS now using HDD recovery option (F8 at startup) to see if everything works well again. Sorry, but if this will not help, I think that you need the BIOS downgrade to the old version.

• HP PhotoSmart C310a market and stop button does not work.

  Disconnect the power and rear connection does not work.  Printing is sitting at the initialization and the button does not illuminate.

  Hey jacobyaz,

  If the printer does not respond when you press the power button, you can try the steps in this video here:

• Slideshow 'next' and 'previous' buttons do not work. Muse

  When published in a browser, some of my 'next' and 'previous' slide show buttons do not work. Can someone help me please?

  I think I solved the problem. I had grouped buttons with other things and Muse didn't like that.

• Qosmio G40: Vista Ultimate - control buttons do not work properly

  Hello friends,

  I have a Qosmio G40 for a few months and everything works well until now.
  The problem is related to the front control panel.

  If I use Windows Media Player, PLAY/STOP/PAUSE/FORWARD/BACKWARD buttons work well, but if I try to use the other buttons like REC (in any case) or turning on LEDS or DOLBY, the button makes the usual sound, but nothing happens, does not open any program that is supposed to open.

  Does anyone have an idea why this is happening. I tried to look for any software configuration of these buttons but can't seem to find.

  My system is Windows Vista Ultimate Edition.

  Best regards
  Ricardo Monteiro

  Hello

  The European driver Toshiba page provides the AV controller Manager
  This tool allows you to customize and TOSHIBA AV Control button preset settings.

  Maybe you should install this tool and it should check again.

  In addition, it would be advisable to reinstall the VAP

  Check it out!