Issue of restoration of HP DV8000

Similar Questions

• HP - G62 issues after restoring full Windows 7 x 64

  Hello

  Had to replace the hard drive, system recovery disks so used to restore the system.

  No problem to install and windows 7 works now on the new hard drive.

  However, Windows Update won't work - it gives the error.

  Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.

  I have googled this error message and it seems to be a common occurrence, however, despite trying to solve the problem by following sites etc, the question remains.

  I tried starting and stopping of Windows update and BITS services, allowed out the appropriate "C:\Windows\SoftwareDistribution" and "catroot2' directories etc.  Nothing works.

  Any ideas where to look next?

  Thank you very much.

  Thanks again.

  No joy with a solution of brand D - it was something that I had already tried.

  Unfortunately, solution of Torodozer had deleted registry entries, so this link is not in use.

  However, I managed to solve the problem - it was one of these two solutions (via the link provided);

  http://support.HP.com/us-en/document/c02219204

  Relates to a driver of the obsolete Intel rapid storage technology

  or

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Windows-Update-can-not-currently-check-for-updates/2ac34cd4-E472-4d78-941D-820265bc28cb?page=8

  Response to "seek wisdom."  Batch file created orders it city and ran.

  Unfortunately, I ran one after the other, so can not say that solved the issue - however it works now.

  Earlier let install 139 updates from 495 Mo...

  Thanks for your help - I would never have found the answer without it.

  See you soon,.

  Zak

• VM issues after restore vRanger connection

  Our virtual machines are stored on a San. VRanger connection allows us to back up virtual machines. For an Active Directory disaster recovery test, I restored a few domain controllers in a single ESX server (Test Server) local storage.

  I can record the successfully the VM, but when starting the virtual machine I get an error:

  "Virtual Disk hard drive 2 is not accessible on the host: cannot access the file.

  When I tried to remove the discs from the virtual machine, I get the error "invalid configuration for device 0.

  I, ve created a new virtual machine without disks. When I try to add the existing drive, I don't see the drive. But through the ESX console are WINSCP I see the entire disk. Life and the test environment have ESX 3.4/VC2.5

  I tried to rename the files vmdk with vmkfstools - E, perhaps hoping geometry/header file would change. But I get an error ' unable to rename 'VM.vmdk': the system cannot find the specified file (25).

  I think it has something to do with the header for the disk file, but I'm not sure.

  I, ve tried manually by changing the header file, but that did not work. See below what changes, I tried to do:

  1. Disk DescriptorFile

  version = 1

  CID = 00000001

  parentCID = ffffffff

  createType ="monolithicFlat" == > changed to «vmfs"»

  1. Description of the measure

  RW 21030912 FLAT "scsi0-0-0 -VMNAME1_1 - flat hard" 0== > changed "FLAT" to "VMFS" | " Delete "scsi0-0 - 0 - | Remove the last "" 0 "".

  1. The disk database

  #DDB

  ddb.virtualHWVersion = "4".

  ddb.toolsVersion = "7300.

  DDB. UUID = "60 00 e1 C2 93 03 f3 d9-38 39 4 02 74 39 d 8 d b6"

  DDB. Geometry.Cylinders = '1309 '.

  DDB. Geometry.Heads = "255".

  DDB. Geometry.sectors = "63".

  ddb.adapterType = "free".

  I found a few forums discussions about similar problems, but no solution.

  Hello. According to Vizioncore the resolution to this is as follows.

  "Hi all,"

  Support has a updated with patches for this version.  Please contact support and ask to build the field trials

  ----

• issue in restoring with RMAN

  Hello
  
  Although I m capable of TABLESPACE RESTORE with RMAN, it seems that the Tablespace does not shows replaced and still the same status.
  
  Below is the command that I used to restore the Tablespace.
  
  run
  {allocate channel t1 type 'sbt_tape' parms
  "ENV = (TDPO_OPTFILE = C:\Program Files\Tivoli\TSM\AgentOBA64\tdpo.opt
  DSMI_ORC_CONFIG = C:\Program Files\Tivoli\TSM\AgentOBA64\dsm.opt)';
  SQL 'ALTER TABLESPACE TESTDTAT TEMPORARY OFFLINE. "
  set the destination archivelog to 'C:\ora\temp\arcl_restore ';
  RESTORE THE TESTDTAT TABLESPACE;
  RECOVER TABLESPACE TESTDTAT;
  SQL 'ALTER TABLESPACE TESTDTAT ONLINE;
  output channel t1;
  }

  You make a full recovery - c. - d. Re-sync tablespace "TESTDTAT" at the time current . All changes in TESTDTAT can be read in HIM.

• Issue of restoration of blackBerry Smartphones

  Hello!

  I'm has you type "BlackBerry" to confirm the erasure pocket.  However, nothing happens then.

  I push to get it going?

  Thank you!

  Strange. Try to hit BB button. See if there's something on the menu that works.

  You will know when it happens. The device is blocked until he makes himself clean wiping.

  DC

• Update and Service Pack installation after system restore

  Hello

  I am a Customer Service representative your question for Windows XP. Here's the issue: System Restore will be restoring all the Service Packs and updates installed Windows XP on a Windows XP computer or at - it need to reinstall everything after the system restore?

  Please enlighten us on this issue.

  Thank you.

  a factory restore is not identical to a windows system restore.

  While a restore of windows re - interrupts the previous versions of the system and program files

  a factory restore is the original state of the computer at the same time that he has left the factory.

  so a factory restore will wipe the hard drive and then re-install all software provided with the computer original.

  to this end, if a faulty the system restore windows to make the system functional again, then the restoration of the factory is the ultimate option to make the system work again.

  the only way to solve a software problem is sometimes with the method above.  However, the method above can not solve the problem below.

  in return is that a windows system restore or a factory restore can overcome problems related to defective hardware.

  in any case, keep in mind that, before executing a factory restore, the user must copy their personal files and email boxes and internet Favorites before performing this procedure.

• Can I shrink a logical drive and not the extended partition to a bare metal restore to a smaller drive?

  The current configuration is a Dell T310 with a S300 controller, with all locations 4 hot filled with SAS drives.  The operating system is SBS 2008 (2008 Server/Vista), I intend to change the controller of S300 (software) controller, a controller (hardware) H700.  My concern is that the H700 brings readers a little smaller in size.

  The typical arrangement of Dell's diagnosis, followed by a recovery partition partition (E :), followed by the system partition (C :), followed by a partition with a logical volume (d).  If I use Diskpart to shrink the D: 'partition', he let me with free space, not allocated.  Thus, it effectively reduces the logical drive, and the extended partition stays the same size as it was, with no way to reduce it.

  The question is, if I shrink the logical D: drive and not the extended partition and then get backups of the system, I'll be able to a bare metal restore on the smallest virtual disk of the H700?

  That's what I did:
  -Released the S300 controller and 4, 450 GB, 15 000 rpm Cheetah RAID-5
  -Replace the controller H700 and 2, 2 TB 7200 RPM in RAID-1 Constellations

  Results:
  -Eliminates the possibility of falling on a disk space issue when restoring
  -Increased the amount of available disk space.
  M ' left with 2 free hard drive for future expansion bays.

• Damaged Restore points/images for a virtual machine only

  I have a vDR 1.2 with sharing CIFS 490 GB attached to it as a backup destination.

  Whenever I save one of my VM TI-error on this issue of restoration of VM and brands it damaged when you run integrity checks the next day.

  It is only on this one (Windows 200 SP4) virtual machine. I can select for deletion, then restart the integrity check that it will remove.

  But then, once I created a new backup of the VM (which always succeeds for this virtual machine) the integrity check will mark it damaged, I do not know why, always the same VM.

  It has 3 hard drives, 5, 8 and 11 GB. I have an another win 2000 SP4 virtual machine that has no problem, the touch is the only one.

  Is it possible to create another CIFS share on the same destination and then create a one-time job that comes only backup a VM?  Then see if you still get the restore points damaged.

• Restore the newspapers archived on RAC

  3 11.2.0.1 on redhat 5.2 CCR node. Try to restore a newspaper archived with script on a node 1 RMAN session.

  run {
  set archivelog destination to '/u01/flash/tmp/restored_archlog';
  restore archivelog logseq = 1812 until logseq = 1821;
  }

  The script ran OK, but only processed yarn thread #= 1. It does not work for newspapers archived to get the error thread # 2 and 3

  RMAN> restore archivelog logseq = 899;
  RMAN-03002: failure of restore command at 02/07/2012 13:51:26
  RMAN-20242: specification does not match any archived log in the repository

  Guess I could run the RMAN command of other nodes to retrieve those wire # 2 and 3. But is there a more convenient way to restore newspaper archived for all threads from a single RMAN session on onenode?
  
  Thank you

  In a CCR environment, it doesn't matter on what node you issue the restore command. Each node must have access to each thread archivelog.
  The message you said archivelog with sequence 899 unknown in the repository (controlfile and recovery catalog, if it exists). Maybe it's an old old archivelog starting from the repository?
  The message does NOT say, it is not found in the backup.

  Werner

• DataFile 1 must be restored

  Hello
  in 10g R2, Win 2008 during recovery from backup by RMAN database, I get successively:
  

   
  rman>recover database; 
  
  RMAN-06094:datafile 1 must be restored 
  
  rman>restore datafile  'D:\BASES\mydb\DATA\SYSTEM01.DBF' 
  
  restore finished 
  rman>recover database; 
  
  RMAN-06094:datafile 1 must be restored 

  You have a solution?
  
  Thank you.

  6094, 1, "datafile %s must be restored"
  // *Cause: A RECOVER command was issued, and the recovery catalog indicates
  //         the specified datafile should be part of the recovery, but
  //         this datafile is not listed in the control file, and cannot be
  //         found on disk.
  // *Action: Issue a RESTORE command for this datafile, using the same
  //          UNTIL clause specified to the RECOVER command (if any), then
  //          reissue the RECOVER.
  

  RECOVER & RESTORE are different operations

• restore / recover the control file

  Hello
  in 10g, I lost all the files of ctl and I want to restore/recovery of backups RMAN.
  Oracle documentation:
  

  6.4.1.4 Restoring a Control File When Using a Recovery Catalog
  Restoring a lost control file from autobackup is easier when using a recovery catalog than when using only the control file to store the RMAN repository. The recovery catalog contains a complete record of your backups, including backups of the control file. Therefore, you do not have to specify your DBID or control file autobackup format.
  
  To restore the control file, connect RMAN to the target database and the recovery catalog, and bring the database to NOMOUNT state. Then issue the RESTORE CONTROLFILE command with no parameters, as in this example:
  
  % rman TARGET rman/rman CATALOG catdb/catdb
  RMAN> RESTORE CONTROLFILE;

  After that I should publish any statement to RECOVER or change the editing of the database and alter database open would be enough?
  
  Thank you.
  Is there a complete senario anywhere?

  The restoration is correct.

  Please see the following:

  http://www.SC.EHU.es/siwebso/KZCC/Oracle_10g_Documentacion/server.101/B10734/rcmrecov.htm#1006247

• 3D Touch Vibration does not

  3D touch vibration stops and does not work, but tactile 3D works fine, when I restart the phone then the vibration on tactile 3D starts to work again.

  Hi aksh6591,

  Thanks for your post in the communities of Support from Apple! I understand that you are able to use Touch 3D without any problem, but have you noticed that the vibration stops working. To resolve the problem, you have restarted your device and it seems to have the tactile 3d vibration function to function normally again. I know that it is important to ensure that everything works as expected; I'm happy to help you.

  As you have noticed that the restart is only a temporary solution, I would recommend that you restore your iPhone using iTunes. Before doing this, it is strongly recommended that you back up your iPhone using the instructions here:

  The backup of your iPhone, iPad and iPod touch - Apple Support

  Once you're done, take a look at this website for instructions on how to restore your device:
  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Once the restoration is complete, choose the option "set up as new" so that you can test the issue before restoring your backup. After you are done testing, you can use the instructions here to restore from your backup:
  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  See you soon!

• Why is my iPhone 5 number listed as 'unknown' and not listed in iMessage and FaceTime?

  I am a customer of StraightTalk. Originally, I had an iPhone CDMA 5 purchased directly from this company. After three years, the battery swelled and I came out of the Apple Store on Thursday with a replacement. After inserting a SIM to speak directly into the device and setting up, I can make calls, send text messages, use the cell data, etc.

  However, my phone number in the settings is listed as 'unknown', and it is not listed at the top of the contacts screen. I can't send messages in my phone number iMessage, because it is not even listed as an option. Ditto for FaceTime. After several hours on the phone with Straight Talk, they determined that my phone service is configured properly, and it is a phone number.

  Does anyone have a solution for this? It is incredibly frustrating that the iPhone 5 does every thing I need to do, and I prefer to keep my phone from replacement $ 75 for three years before moving on to an iPhone SE.

  Hello, smirza!

  Thank you for using communities of support from Apple!  What I understand in your post, you got a replacement iPhone 5 and have found that your phone number is not listed in settings > phone and iMessages/FaceTime.  Your number should certainly be in all those places, so I'm happy that you came here, then we can help you understand what is happening together.  Check with your mobile provider was a big first step.  I have other ideas for you as well:

  1. It seems that you already have the latest version of iOS (9.3.4), but we will also check your carrier settings are up to date: iOS: update your carrier settings
  2. If you haven't already done so, save your iPhone on iCloud or iTunes: How to backup your iPhone, iPad and iPod touch
  3. On your iPhone, go to settings > Contacts > My Info and make sure that your personal contact (with your iPhone phone number) card is selected.
  4. Go to settings > phone > my number and see if you are able to manually, enter your number and save it.
  5. If none of these steps work, try to restore your phone from the backup that you made: restore your iPhone, iPad or iPod touch from a backup
  6. If you still don't see your issue, try restoring your phone as a new and see if your number is: use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings

  Have a fantastic week!

• Unable to put the bookmark bar on the page after your last update

  MONITORING INDICATES TO BOOKMARK BAR BUT IT WON'T SHOW WENT TO CUSTOMIZE BAR BOOKMARK CHECKED AND CLICK ON CUSTOMIZE AGAIN WHICH SHOULD PLACE IT UNDER THE SEARCH BAR BUT DOES NOTHING. THIS HAS HAPPENED AFTER YOUR LAST UPDATE.
  ANY IDEA?
  Thank you

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

  If this does not work, maybe it's time to try refresh (called "Reset" in older versions of Firefox) which can resolve many issues by restoring Firefox as his default from factory and save your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• Everything I need to know before you uninstall and reinstall FIREFOX?

  I have a problem with my online banking which the Bank will not solve because everything it works fine under Internet Explorer.
  So my only other option seems to be to work with FIREFOX.

  Hi, if you encounter a problem with a particular site, this can work: see the section "How to remove a single website to my story?" in this article - delete navigation, search and download history on Firefoxand remove all references to this Web site.

  If this does not help, you can try refresh (called "Reset" in older versions of Firefox) which can resolve many issues by restoring Firefox as his default from factory and save your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  If you really need to uninstall - Uninstall Firefox on your computer, make sure you please reinstall only mozilla.org , since Firefox can come bundled with unwanted from other sites.

  This corrects the problem? Please report to us!

  Thank you.