issue of the listener status
Hello
I am migrating the database of a domain to another controller and when I try to start the listener on the node migrated, I get the message below.
He said that the listener is started but its unable to authentcate the user. Is this a problem?
LSNRCTL > start
AMT-01106: listener using the name listener fleet has already begun
LSNRCTL > status
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP (PORT = 1540))(HOST=rt334)))
AMT-01189: the listener could not authenticate the user
Thank you
- AMT-01189: the listener could not authenticate the user
- Cause: The user attempted to issue a privileged administrative command, but could not be authenticated by the receiver by using the local operating system authentication mechanism. This can occur due to one of the following reasons:
1. the user runs a version of LSNRCTL, which is lower than the version of the listener.
2. the user is trying to administer the listener to a remote node.
3. the auditor could not get the necessary system resources to perform the authentication.
4. the local network connection between the listener and LSNRCTL was interrupted unexpectedly during the exchange of authentication messages, for example if program suddenly abandoned LSNRCTL.
5. the communication between the listener and LSNRCTL is be intercepted by a malicious user.
6. the software that the user is running does not follow the authentication protocol, which indicates a malicious user.
-
Action: Make sure that administrative commands are issued using the LSNRCTL tool, which is a version equal or greater than the version of the listener, and the tool and the listener running on the same node. You can issue the VERSION command to determine the version of the listener. If a malicious user is suspected, use the information provided in the listener log file to determine the source and nature of the requests. Turn on the earpiece of tracing for more information. If the error persists, contact Oracle Support Services.
http://docs.Oracle.com/CD/E11882_01/server.112/e17766/tnsus.htm#TNS-01189
Tags: Database
Similar Questions
-
Confusion between issues of the listener
Hi all
SLES 11
Step 1
I installed the first db 10R2 on our server. He created a listener from 10g to port 1521. And the connection is good.
Step 2
Then on the same server... I installed 11 GR 2 XE with APEX epg configured on the listening port 1522. I purposely created its own listener APEX is very sensitive in connectivity of the listener.
Two listener now the connection separately for each database.
Step 3.
Then on the same server... I installed 11 GR 2 EA and the listener uses port 1521. If this setting overrides the listener 10g... while I'm not disable it. And then began the 11 GR 2 new of the listener.
It's now at this stage that the gr 10, 2 and 11 GR 2 EA have connection problems :(ERROR:
can help you solve this problem please?
ORA-12514: TNS:listener is not currently of service requested in connect descriptor
Can I use 11gXE for gr 10, 2 and 11 GR 2 EE earpiece?
Which 3 listeners I should alone running?
Thank you very much
zxyWhen you try to connect to a different database, you have the good ORACLE_HOME and ORACLE_SID?
-
Hi all
I have a 2 RAC node and when I run the lsnrctl services command on node 2, I get a list of services, but when I run the same node 1 I get
The listener supports no services
is this normal or should I receive a list on both nodes?
I'm essentially looking to get to the bottom of why one of my databases on this implementation RAC keeps giving me an IO exception: the network adapter could not establish the connection in EM, but I failed to find an actual error for this number yet.
Thank you
Published by: Kwisatz78 on July 4, 2011 08:21Kwisatz78 wrote:
HelloWell, it worked
[Im happy:]
I don't understand why. Now I have the Listener.ora files on both nodes which look different with what you put and that without it, why is this?
The listener expects the requests from Clients to connect to the Instance. It receives connection requests incoming clients and handles the traffic of these requests to the database server.
For example: If node 1 is down, listener node redirection 2 while waiting request to node 2. This listening port on both nodes must be different.For more information, you can try this:
http://www.Amazon.com/Pro-Oracle-database-Linux-administration/DP/1590595246
http://download.Oracle.com/docs/CD/E14072_01/network.112/e10836/net_arch.htmHTH
--
Adam -
a dll Win32 winspool call for the issue of the printer status
Hello
I apologize because I do not understand Win32.
I for 2014 LabVIEW full development system and want to access the Win32 API.
I am trying to write a function to determine if a printer is out of ink or offline for some reason any.
I see that the MSDN Winspool library has the features I need.
According to the MSDN Web site, the dll is Winspool.drv.
https://msdn.Microsoft.com/en-us/library/Windows/desktop/dd162751 (v = vs. 85) .aspx
I tried to do a call library function in LabVIEW, but it is the search for DLL and does not recognize the Winspool.drv
It lie in the methods in LabVIEW to access the Winspool, or nobody knows what the correct dll (and location) I call is?
Ultimately, what I want to do is open printer-> get jobs-> status of--> close printer.
Seems simple enough.
Thanks in advance for any advice.
You use a 32-bit version or 64-bit LabVIEW? If you use the 32-bit version, you should not try to load the 64-bit version of the DLL. Surprisingly, the System32 directory is for 64-bit dll, and the SysWOW64 folder is for 32-bit dll. If you have installed the 32-bit version of LabVIEW, try SysWOW64 winspool.drv.
-
Issue of the listener...
I'm not too good with the whole concept of 'listener' and I think that's what I would need to use in this situation, but I don't know how. I hope someone can help me...
Basically, I want to call a function every time that you press the ENTER key on the keyboard, but ONLY when a certain textfield (in this case, called "search_txt") has focus (the cursor or other)...
How this is done? Thank you!...
"DIY_Lobotomy" wrote in message
News:efk1h5$p3h$1@forums. Macromedia.com...
> I'm not too good with the whole concept of "listener", and I think only of
> what I would
> to do in this situation, but I don't know how. I hope that someone
> can
> Help me...
>
> Basically, I want to call a function every time you press the ENTER key
> the
> keyboard, but ONLY if a certain textfield (in this case, called
> "search_txt.
> has the focus (the cursor or other)...
>
> How is this done? Thank you!...
>
>Here is an example that works if your
this.onKeyDown = function() {}
If (Key.getCode () == Key.ENTER & Selection.getFocus () ==)
{"_level0.my_txt")}
trace ("Yes");
}
}Key.addListener (this);
-
When I start the listener, I get the following "status UNKNOWN"...
Oracle 11g R1 on Oracle Enterprise Linux
Here is the configuration of my listner
**********************************************************************
[oracle@oracle-test admin] $ cat listener.ora
listener.ora # Network Configuration file: /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME=/u01/app/oracle/product/11.1.0/db_1)
(= Extproc PROGRAM)
)
(SID_DESC =
(GLOBAL_DBNAME = orcl.o - test.mydomain.name)
(ORACLE_HOME = u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = orcl)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xx.xx.xx) (PORT = 1521))
)
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
)
)
*************************************************************************
When I start the listener, I get the following messages of "Status UNKNOWN".
Why?
[oracle@oracle-test bin] $. / lsnrctl start
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on February 19, 2010 11:22:04
Copyright (c) 1991, 2007, Oracle. All rights reserved.
From /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: Please wait...
TNSLSNR for Linux: Version 11.1.0.6.0 - Production
System settings file is /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/11.1.0/db_1/log/diag/tnslsnr/oracle-test/listener/alert/log.xml
Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=xxx.xx.xx.xx) (PORT = 1521)))
Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=xxx.xx.xx.xx) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start date February 19, 2010 11:22:04
Uptime 0 days 0 h 0 min 0 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/product/11.1.0/Db_1/log/diag/tnslsnr/Oracle-test/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=xxx.xx.xx.xx) (PORT = 1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
Summary of services...
Service 'PLSExtProc' has 1 instance (s).
Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
Service "orcl.o - test.mydomain.name" has 1 match (s).
Instance "orcl", status UNKNOWN, has 1 operation for this service...
The command completed successfullyThere is nothing to worry about it. UNKNOWN means, the listener knows the orcl SID because of the list of SIDS. This is called static record. If your instance orcl's up, PMON dynamically registers the listener (if you are using port 1521 without additional configuration), which leads to a READY State.
Kind regards
Uwehttp://uhesse.WordPress.com
-
Configuring the listener and other issues
I installed 2 instances of database on the same database and the same house database.
Instances use the same listener. If I try to start the business manager in the browser for both instances,
Enterprise Manager starts just to the last installed instance. I edited the listener.ora one file
Add a Description more with another port number as follows:
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = merge)(PORT = 1522))
)
for the following content:
LISTENER_APPDB =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = merge)(PORT = 1521))
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
)
now the file looks similar to the following:
LISTENER_APPDB =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = merge)(PORT = 1521))
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = merge)(PORT = 1522))
)
)
ADR_BASE_LISTENER_APPDB = D:\app\oracle2
SID_LIST_LISTENER_APPDB =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\app\oracle2\product\11.2.0\dbhome_1)
(= Extproc PROGRAM)
(ENVS = "EXTPROC_DLLS=ONLY:D:\app\oracle2\product\11.2.0\dbhome_1\bin\oraclr11.dll")
)
)
I also changed the port of one of the instances in the file tnsnames.ora from 1521 to 1522.
It is now possible to launch Enterprise Manager in both cases. But after I connect to one of the
bodies with Enterprise Manager from the logs of the other instance. Is it ok then? Will I have problems
with this configuration? Should I do something different?
Second question: if I installed an instance during installation, some patches where
automatically installed. After that, I installed another instance. Do I have to patch this body too?
Are the hotfixes installed for the DBMS together or just for a single instance?
* Third question: if I have 2 case how can I set the parameter btree_bitmap_plans for only *.
one of the instances? I found the following code to do this:
ALTER SYSTEM SET "_b_tree_bitmap_plans" = false SCOPE = SPFILE;
but for which the instance parameter will be defined for both or just one? What I have to choose
one of the instances? How can I do?
Published by: 995273 on 21.03.2013 02:49Set oracle_sid = your_db_name
then, in SQL, use command below
ALTER SYSTEM SET "_b_tree_bitmap_plans" = false SCOPE = SPFILE;
Do you have any recommendations for the Support of Oracle to use?
-
Solaris 10 SPARC 64 bit
Oracle 10.2. 0.4
I have five listeners with different ports running on a particular server, but when I do ps - ef | grep lsnr, I only see three. And when I start the listener that does not appear, say, mdb, it tells me "MDB is already underway with CSDB, one of the listeners is shown below.
Any idea?
bash-3. $00 ps - ef | grep lsnr
Oracle 932 1 0 17:39:56? 0:00 /ora01/app/oracle/product/10.2/db_1/bin/tnslsnr csdb - inherit
Oracle 944 942 0 17:42:31 pts/2 0:00 grep lsnr
Oracle 928 1 0 17:39:40? 0:00 /ora03/app/oracle/product/10.2/db_1/bin/tnslsnr csappdb - inherit
Oracle 937 1 0 17:40:11? 0:00 /ora05/app/oracle/product/10.2.0/db_1/bin/tnslsnr csxmldb - inheritAlbert Zaza wrote:
What is the problem solve you them by having more than one listener? And exactly how would you believe one of them is "for security"?
We wanted it for each database to have its own listener named after the name for example.
It's like the construction of a separate switchboard for each phone customer.
For a listener instance, base on the listener can access control.
I'm not sure that understand what you mean. In fact, I'm quite sure that I have no idea what you mean.
>And to cite, this was done earlier when the fourth dba before me was here.
There is a good justification for a bad practice. "The guy in front of me he did it."
>
Published by: Albert Zaza on December 15, 2010 18:01
Published by: EdStevens on December 15, 2010 21:11
-
can't automate the listener on startup under redhat 6.3
Dear oracle specialists I installed oracle 11g r2 on linux RedHat 6.3 after a successful installation and automating db departure
can't automate starts high earpiece however able to start it manually since I was new as well bi for oracle in order to
scripts Linux can help me find the error
----------------------------
Oracle 2918 0.4 0.0 1984168 18440? SS 06:33 0:00 ora_pmon_ice Oracle 2920 0.3 0.3 1982056 15308? SS 06:33 0:00 ora_vktm_ice Oracle 2924 0.3 0.0 1982056 15392? SS 06:33 0:00 ora_gen0_ice Oracle 2926 0.3 0.0 1982056 15248? SS 06:33 0:00 ora_diag_ice Oracle 2928 0.5 0.0 1982080 23492? SS 06:33 0:00 ora_dbrm_ice Oracle 2930 0.3 0.0 1982056 15464? SS 06:33 0:00 ora_psp0_ice Oracle 2932 0.4 0.0 1982568 19000? SS 06:33 0:00 ora_dia0_ice Oracle 2934 1.6 0.9 1982056 39228? SS 06:33 0:03 ora_mman_ice Oracle 2936 0.5 0.0 1987812 22012? SS 06:33 0:00 ora_dbw0_ice Oracle 2938 0.5 0.0 1997608 23436? SS 06:33 0:00 ora_lgwr_ice Oracle 2940 0.4 0.0 1982568 18356? SS 06:33 0:00 ora_ckpt_ice Oracle 2942 0.7 0.0 1982616 34412? SS 06:33 0:00 ora_smon_ice Oracle 2944 0.5 0.0 1982576 22268? SS 06:33 0:00 ora_reco_ice Oracle 2946 0.2 1.4 1987896 64636? SS 06:33 0:00 ora_mmon_ice Oracle 2948 0.4 0.0 1982056 20340? SS 06:33 0:00 ora_mmnl_ice Oracle 2950 0.3 0.0 1983956 15356? SS 06:33 0:00 ora_d000_ice Oracle 2952 0.3 0.0 1983120 14520? SS 06:33 0:00 ora_s000_ice Oracle 2994 0.3 0.0 1982056 17344? SS 06:33 0:00 ora_qmnc_ice Oracle 3205 0.1 1.2 1988764 54972? SS 06:33 0:00 ora_cjq0_ice Oracle 3207 0.7 0.0 1983640 31268? SS 06:33 0:00 ora_q000_ice Oracle 3209 0.7 0.0 1985556 32068? SS 06:33 0:00 ora_q001_ice Oracle 3269 1.0 0.6 1983632 27092? SS 06:36 0:00 ora_j000_ice Oracle 3271 0.3 0.0 1982052 15032? SS 06:36 0:00 ora_j001_ice Here's my database looks like after automatic loads the operating system after the show
the PS command
and here's my interlocutor after issuing. / lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on August 2, 2013 06:42:43
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
Linux error: 111: connection refused
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=ICELANDLOCAL.localdomain) (PORT = 1521)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
Linux error: 111: connection refused
---------------------------------------------------
.bash_profile environment variables
export PATH
umask 022
export TMPDIR = / tmp
export ORACLE_BASE = / u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.1/dbhome_1
export ORACLE_HOME_LISTNER=$ORACLE_BASE/product/11.2.1/dbhome_1
Export ORACLE_HOME_LISTNER = $ORACLE_HOME
Export TNS_ADMIN = ORACLE_HOME/network/admin
export LD_LIBRARY_PATH = $ORACLE_HOME/lib: / lib: / usr/lib
export PATH = $ORACLE_HOME/bin: $PATH
export ORACLE_SID = ice
and my free from oracle startup script
Description #: Oracle automatic start-stop script.
#
# Define ORA_HOME as equivalent to the $ORACLE_HOME
# from which you want to run dbstart and dbshut;
#
# Define ORA_OWNER to the userid of the owner of the
# Oracle in ORA_HOME server.
ORA_HOME=/U01/app/Oracle/product/11.2.1/dbhome_1
ORA_OWNER = oracle
If [! f $ORA_HOME/bin/dbstart]
then
echo "Oracle startup: cannot start.
output
FI
case '$1' in
'Start')
# Run Oracle databases:
# The following command assumes that the oracle connection
# will not prompt the user for all values
known $ORA_OWNER - c "start ORA_HOME/bin/lsnrctl $ LISTENER."
known $ORA_OWNER - c $ORA_HOME/bin/dbstart $ORA_HOME
touch/var/lock/subsys/Ben
;;
'stop')
# Stop the Oracle databases:
# The following command assumes that the oracle connection
# will not prompt the user for all values
known $ORA_OWNER - c $ORA_HOME/bin/dbshut $ORA_HOME
known $ORA_OWNER - c "ORA_HOME/bin/lsnrctl stop $ LISTENER."
RM-f/var/lock/subsys/Ben
;;
ESAC
any suggestion or help would be appricieated
Thanks in advance
you are right about the listener
Here is my old script released
#! / bin/sh
# chkconfig: 345 99 10
Description #: Oracle automatic start-stop script.
#
# Define ORA_HOME as equivalent to the $ORACLE_HOME
# from which you want to run dbstart and dbshut;
#
# Define ORA_OWNER to the userid of the owner of the
# Oracle in ORA_HOME server.
ORA_HOME=/U01/app/Oracle/product/11.2.1/dbhome_1
ORA_OWNER = oracle
If [! f $ORA_HOME/bin/dbstart]
then
echo "Oracle startup: cannot start.
output
FI
case '$1' in
'Start')
# Run Oracle databases:
# The following command assumes that the oracle connection
# will not prompt the user for all values
known $ORA_OWNER - c "start ORA_HOME/bin/lsnrctl $".
known $ORA_OWNER - c $ORA_HOME/bin/dbstart
touch/var/lock/subsys/Ben
;;
'stop')
# Stop the Oracle databases:
# The following command assumes that the oracle connection
# will not prompt the user for all values
known $ORA_OWNER - c $ORA_HOME/bin/dbshut
known $ORA_OWNER - c "ORA_HOME/bin/lsnrctl stop $.
RM-f/var/lock/subsys/Ben
;;
ESAC
and here's my new script released
#! / bin/sh
# chkconfig: 345 99 10
Description #: Oracle automatic start-stop script.
#
# Define ORA_HOME as equivalent to the $ORACLE_HOME
# from which you want to run dbstart and dbshut;
#
# Define ORA_OWNER to the userid of the owner of the
# Oracle in ORA_HOME server.
ORA_HOME=/U01/app/Oracle/product/11.2.1/dbhome_1
ORA_OWNER = oracle
If [! f $ORA_HOME/bin/dbstart]
then
echo "Oracle startup: cannot start.
output
FI
case '$1' in
'Start')
# Run Oracle databases:
# The following command assumes that the oracle connection
# will not prompt the user for all values
Su - oracle - c "start ORA_HOME/bin/lsnrctl $".
known $ORA_OWNER - c $ORA_HOME/bin/dbstart
touch/var/lock/subsys/Ben
;;
'stop')
# Stop the Oracle databases:
# The following command assumes that the oracle connection
# will not prompt the user for all values
known $ORA_OWNER - c $ORA_HOME/bin/dbshut
Su - oracle - c "ORA_HOME/bin/lsnrctl stop $.
RM-f/var/lock/subsys/Ben
;;
ESAC
as I said I came to this at random by the help of this article
http://yong321.freeshell.org/oranotes/UnixStartupScripts.txt
-
Communication with the listener OEM problem
Hi all
for some reason, my OEM is corrupted and when activated, it messes with the listener. I have found the problem lies in OEM, rather than in the listener since I can establish connection between SQLdeveloper and the server through the listener without any problem.
I have the named instance INARA, host named FIREFLY. SNOWDROP.COM and the listener named ORACLE_LISTENER.
I closed the SQLdeveloper application and its listener and OEM first to identify the problem. After that I started OEM, emoms.log dumped Log Management Service:
also the trace file emagent.trc Management Agent dumped:2011-06-15 11:55:12,203 [HTTPThreadGroup-2] WARN jdbc.ConnectionCache _getConnection.353 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying 2011-06-15 11:55:12,204 [HTTPThreadGroup-2] ERROR conn.ConnectionService verifyRepositoryEx.891 - Invalid Connection Pool. ERROR = Io exception: The Network Adapter could not establish the connection 2011-06-15 11:55:12,205 [EMUI_11_55_12_/console/aboutApplication] ERROR svlt.PageHandler handleRequest.639 - java.lang.IllegalStateException: Response has already been committed java.lang.IllegalStateException: Response has already been committed at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1892) at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:249) at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51) at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193) at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284) at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198) at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:1113) at oracle.sysman.emSDK.svlt.PageHandler.myRender(PageHandler.java:1173) at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:597) at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:787) at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:343) at oracle.sysman.eml.app.Console.doGet(Console.java:157) at javax.servlet.http.HttpServlet.service(HttpServlet.java:743) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:107) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:146) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:327) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234) at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
Looked like OEM had some errors and warnings after it opened, but I don't know what they meant.SQL = " OCISessionGet"... LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=firefly.snowdrop.com)(PORT=1521))(CONNECT_DATA=(SID=inara))) 2011-06-15 11:57:05,914 Thread-4147767632 ERROR vpxoci: ORA-12541: TNS:no listener 2011-06-15 11:57:05,914 Thread-4147767632 WARN vpxoci: Login 0x67fd70 failed, error=ORA-12541: TNS:no listener 2011-06-15 11:57:05,914 Thread-4147767632 WARN TargetManager: Exception in computing dynamic properties of {inara.snowdrop.com, oracle_database },GetDbBlockSize::ORA-12541: TNS:no listener 2011-06-15 11:57:05,916 Thread-4138318160 ERROR TargetManager: nmeetm.c : Target inara.snowdrop.com has a failed critical dynamic property 2011-06-15 11:57:05,918 Thread-4138318160 WARN upload: Upload manager has no Failure script: disabled 2011-06-15 11:57:05,918 Thread-4138318160 WARN upload: Amount of upload data will be recalculated due to reload.enabling collections and regenerating metadata. 2011-06-15 11:57:05,918 Thread-4138318160 WARN TargetManager: Regenerating all Metadata 2011-06-15 11:57:05,983 Thread-4138318160 WARN upload: Truncating value of "SHORT_NAME" from "Average Synchronous Single-Block Read Latency (ms)" to "Average Synchronous Single-Block Read La" 2011-06-15 11:57:05,983 Thread-4138318160 WARN upload: Truncating value of "SHORT_NAME" from "Average Synchronous Single-Block Read Latency (ms)" to "Average Synchronous Single-Block Read La" 2011-06-15 11:57:06,080 Thread-4138318160 WARN upload: Truncating value of "COLUMN_LABEL" from "Total messages processed per queue per subscriber per minute in the last interval" to "Total messages processed per queue per subscriber per minute in " 2011-06-15 11:57:06,080 Thread-4138318160 WARN upload: Truncating value of "COLUMN_LABEL" from "Total messages received per queue per subscriber per minute in the last interval" to "Total messages received per queue per subscriber per minute in t" 2011-06-15 11:57:06,080 Thread-4138318160 WARN upload: Truncating value of "COLUMN_LABEL" from "Messages processed per queue (%) per subscriber per minute in the last interval" to "Messages processed per queue (%) per subscriber per minute in th" 2011-06-15 11:57:06,080 Thread-4138318160 WARN upload: Truncating value of "COLUMN_LABEL" from "Age of the first message in persistent queue per subscriber (seconds)" to "Age of the first message in persistent queue per subscriber (sec" 2011-06-15 11:57:06,081 Thread-4138318160 WARN upload: Truncating value of "COLUMN_LABEL" from "Age of the first message in the buffered queue per queue (seconds)" to "Age of the first message in the buffered queue per queue (second" 2011-06-15 11:57:06,096 Thread-4138318160 WARN collector: enable collector 2011-06-15 11:57:06,100 Thread-4138318160 WARN collector: Regenerating all DefaultColls 2011-06-15 11:57:07,145 Thread-4147767632 ERROR upload: Exceeded max. amount of upload data: 314 files, 346.533864 MB Data. 89.74% of disk used. Disabling collections. 2011-06-15 11:57:07,145 Thread-4147767632 WARN collector: Disable collector 2011-06-15 11:57:08,237 Thread-4147767632 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository 2011-06-15 11:57:08,337 Thread-4147767632 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository 2011-06-15 11:57:38,442 Thread-4147767632 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository 2011-06-15 11:57:38,545 Thread-4147767632 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository 2011-06-15 11:58:08,732 Thread-4138318160 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository 2011-06-15 11:58:08,835 Thread-4138318160 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository 2011-06-15 11:58:38,952 Thread-4138318160 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository 2011-06-15 11:58:39,055 Thread-4138318160 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository 2011-06-15 11:59:09,157 Thread-4138318160 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository 2011-06-15 11:59:09,260 Thread-4138318160 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository 2011-06-15 11:59:39,364 Thread-4138318160 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository 2011-06-15 11:59:39,465 Thread-4138318160 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository 2011-06-15 11:59:58,595 Thread-4154857808 ERROR command: nmejcn: received no status header from repository at https://firefly.snowdrop.com:5500/em/upload/
After OEM is started successfully, at least according to the commandment of emtcl, I started ORACLE_LISTENER listener. At this point, I did the loopback test using NET manager on the server, and it took forever so I aborted it. The database at this point was still open and running without problem however. Taken TNSPING 157080 msc to return an OK value, meanwhile lsnrctl status ORACLE_STATUS was at a standstill.
Then look at emagent.trc after that the listener was launched:
also emoms.trc2011-06-15 12:02:10,306 Thread-4138318160 WARN ssl: <nmehlssl.c:nmehlssl_readcb>: nmehl_read_sock timed out, rsf = -5, setting read timeout flag 2011-06-15 12:02:10,306 Thread-4138318160 WARN ssl.io: fd=6: nmehlssl_read, nzos_Read error = 28862 readTimed Out = 1 2011-06-15 12:02:10,306 Thread-4138318160 WARN http: <nmehl.c>:<nmehl_readline>: nmehlssl_read() timed out 2011-06-15 12:02:10,306 Thread-4138318160 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text = 2011-06-15 12:02:40,433 Thread-4138318160 WARN ssl: <nmehlssl.c:nmehlssl_readcb>: nmehl_read_sock timed out, rsf = -5, setting read timeout flag 2011-06-15 12:02:40,433 Thread-4138318160 WARN ssl.io: fd=6: nmehlssl_read, nzos_Read error = 28862 readTimed Out = 1 2011-06-15 12:02:40,433 Thread-4138318160 WARN http: <nmehl.c>:<nmehl_readline>: nmehlssl_read() timed out 2011-06-15 12:02:40,433 Thread-4138318160 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text = 2011-06-15 12:03:40,570 Thread-4138318160 WARN ssl: <nmehlssl.c:nmehlssl_readcb>: nmehl_read_sock timed out, rsf = -5, setting read timeout flag 2011-06-15 12:03:40,570 Thread-4138318160 WARN ssl.io: fd=6: nmehlssl_read, nzos_Read error = 28862 readTimed Out = 1 2011-06-15 12:03:40,570 Thread-4138318160 WARN http: <nmehl.c>:<nmehl_readline>: nmehlssl_read() timed out 2011-06-15 12:03:40,570 Thread-4138318160 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text = 2011-06-15 12:04:10,704 Thread-4138318160 WARN ssl: <nmehlssl.c:nmehlssl_readcb>: nmehl_read_sock timed out, rsf = -5, setting read timeout flag 2011-06-15 12:04:10,704 Thread-4138318160 WARN ssl.io: fd=6: nmehlssl_read, nzos_Read error = 28862 readTimed Out = 1 2011-06-15 12:04:10,704 Thread-4138318160 WARN http: <nmehl.c>:<nmehl_readline>: nmehlssl_read() timed out 2011-06-15 12:04:10,704 Thread-4138318160 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text =
Finally, the ORACLE_LISTENER journal says:2011-06-15 12:05:26,159 [HTTPThreadGroup-6] WARN jdbc.ConnectionCache _getConnection.353 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying 2011-06-15 12:05:29,774 [HTTPThreadGroup-5] WARN jdbc.ConnectionCache _getConnection.352 - Io exception: Socket read timed out java.sql.SQLException: Io exception: Socket read timed out at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:77) at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:111) at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174) at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:230) at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:501) at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:436) at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:621) at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:203) at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34) at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:492) at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:386) at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:276) at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:212) at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:140) at oracle.jdbc.pool.OracleImplicitConnectionCache.makeCacheConnection(OracleImplicitConnectionCache.java:1752) at oracle.jdbc.pool.OracleImplicitConnectionCache.makeOneConnection(OracleImplicitConnectionCache.java:644) at oracle.jdbc.pool.OracleImplicitConnectionCache.getCacheConnection(OracleImplicitConnectionCache.java:592) at oracle.jdbc.pool.OracleImplicitConnectionCache.getConnection(OracleImplicitConnectionCache.java:460) at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:544) at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:480) at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:336) at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:322) at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:575) at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:207) at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:1138) at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnection(ConnectionService.java:1172) at oracle.sysman.emdrep.receiver.OMSHandshake.getParameterFromDB(OMSHandshake.java:570) at oracle.sysman.emdrep.receiver.OMSHandshake.getMaxAgentCompatVer(OMSHandshake.java:552) at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:1033) at oracle.sysman.emdrep.receiver.OMSHandshake.handshake(OMSHandshake.java:836) at oracle.sysman.emdrep.receiver.FxferRecv.doGet(FxferRecv.java:598) at javax.servlet.http.HttpServlet.service(HttpServlet.java:743) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:327) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234) at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595) 2011-06-15 12:05:29,775 [HTTPThreadGroup-5] WARN jdbc.ConnectionCache _getConnection.353 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
At this point, part of the NET services caused by OEM, corruption has been altered, but I didn't know what caused it. NET with his listener services can operate normally after I stopped OEM and forced killed the listener and restarted normally.15-JUN-2011 12:16:38 * <unknown connect data> * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.5)(PORT=18844)) * establish * <unknown sid> * 12525 TNS-12525: TNS:listener has not received client's request in time allowed TNS-12535: TNS:operation timed out TNS-12606: TNS: Application timeout occurred 15-JUN-2011 12:16:38 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=oracle))(SERVICE_NAME=inara.snowdrop.com)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.5)(PORT=18842)) * establish * inara.snowdrop.com * 0 15-JUN-2011 12:16:38 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=oracle))(SERVICE_NAME=inara.snowdrop.com)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.5)(PORT=18838)) * establish * inara.snowdrop.com * 0 15-JUN-2011 12:16:38 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=oracle))(SERVICE_NAME=inara.snowdrop.com)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.5)(PORT=18833)) * establish * inara.snowdrop.com * 0 15-JUN-2011 12:16:38 * service_update * inara * 0 15-JUN-2011 12:16:38 * service_update * inara * 0 15-JUN-2011 12:16:38 * service_update * inara * 0
No idea how to solve the problem of this point?
Kind regards
ValValerie,
The problems are manifold.
1 in listener.ora are two defined listeners, as well running on port 1521. This is not going to work. As the default listener name is 'Listener', probably the named listener "listener" is launched and the listener called 'oracle_listener' has never worked. Check this box by issuing
status lsnrctl listener
lsnrctl status oracle_listener.
Delete oracle_listener.
2 the tnsnames.ora is a mess.
Apart from the first definition, INARA, everything else can be removed, as they are incorrect, in any case. Localhost means 127.0.0.1, you do not have a listening port on localhost, so all the definitions referring to localhost are redundant.Should a .properties file in $ORACLE_HOME/sysman /... with the definition of the listener. Currently I can't find it, but then I use 11 GR 2.
-------------
Sybrand Bakker
Senior Oracle DBA -
The old status bar showed a lock icon when a site secure - where is this lock icon in verse 4?
The status bar was along the bottom of the window. At the right end of the bar, a lock icon appears when you are on a secure site, as bank earnings or invoice. With the now missing status bar, where can I see this lock icon?
The lock is no longer a part of Firefox; It can give users a sense that a site is secure by not providing all the information related to a site. Familiarize yourself with the Site identity button in Firefox:
- https://support.Mozilla.com/en-us/KB/site+identity+button
- http://www.dria.org/WordPress/archives/2008/05/06/635/
You can install an add-on to display a padlock in the URL/address bar:
You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.
- Shockwave Flash 10.2 r152
- Check your plugin versions on one of the following links:
- http://www.Mozilla.com/en-us/pluginCheck/
- https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
- Note: plugin check page lacks information about all versions of the plugin
- There are links to tests specific plugin available on this page:
- Update the Flash plugin to the latest version.
-
Issue using the ink cartridges.
I just replaced all my ink cartridges (and now black twice). He did not print documents sent by my iPad or make copies. However, it will display the printer status. I cleaned the print heads. It is then printed out-of-print diagnostic quality showing all my color cartridges are full, but nothing for the black. I clean the printhead three times now and same thing.
Hello
Many printers will not print if any of the ink cartridges do not register. If
You can remove and reinstall the black print cartridge (had to do that to my)
Printer Brother last night).OEM for the printer manufacturer is responsible for the proper functioning of the
printer and their drivers. Check with their support, their online
documentation and drivers and ask in their forums (if any).=============================================
The main issue "might" be the engines, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Solve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsSolve printer problems (Windows 7)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Open the printer (Windows 7) Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Install issue with the Oracle database Client in Hyperion 11.1.2.4
We had problems try raising the EPMA server. I found digging that odp.net was necessary. It seems that we had missed client installation Oracle database on the machine. So I stopped the services and tried to install the client. It always ends with error:
INFO: Loading file:/G:/Hyperion_Installation/Hyperion_11124_Installation/db64/Disk1/install/... beanstore/internship/shiphomeproperties. XML
INFO: Translating the external format in raw format
NEWS: Restoration of class file:/G:/Hyperion_Installation/Hyperion_11124_Installation/db64/Disk1/install/... oracle.install.driver.oui.ShiphomeMetadata/internship/shiphomeproperties. XML
INFO: Loading Xml Bean store beans. [BeanStoreName:shiphome - metadata]
NEWS: Development of the property: properties in the bean: shiphome-metadata
INFO: the inventory location isC:\Program
INFO: the inventory location isC:\Program
INFO: Retrieve ASM Cluster File System information...
INFO: the inventory location isC:\Program
INFO: the inventory location isC:\Program
INFO: estimated size for Administratorinstall is 1126.4000005722046
INFO: Access path is: == > C:\Users\_HYPER~1\AppData\Local\Temp\OraInstall2015-07-16_08-27-52AM\jdk\jre\bin; C:\Windows\System32; C:\Windows; G:\Oracle\Middleware\dbclient32\bin; G:\Oracle\Middleware\dbclient64\bin; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0; G:\Oracle\Middleware\ohs\bin; G:\Oracle\Middleware\ohs\opmn\bin; G:\Oracle\Middleware\ohs\opmn\lib; G:\Oracle\Middleware\ohs\perl\bin; G:\Oracle\Middleware\EPMSystem11R1\common\SAP\bin;.
GRAVE: Name host [FATAL] [INS-32053] the specified Oracle already exists.
CAUSE: The Oracle home name specified on the command line is a name of House of Oracle in the Central inventory.
ACTION: Choose a different name at Oracle. Abandon this installation session and try again.
INFO: Tips are ABORT
INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set
INFO: Completed state validating < getOracleHome >
NEWS: Put an end to all operations in the background
INFO: Finished all operations in the background
INFO: Find the status of output more suitable for the current application
INFO: Exit status is - 2
NEWS: Stop Oracle Client install
Now it looks like the issue is located here:
GRAVE: Name host [FATAL] [INS-32053] the specified Oracle already exists.
CAUSE: The Oracle home name specified on the command line is a name of House of Oracle in the Central inventory.
ACTION: Choose a different name at Oracle. Abandon this installation session and try again.
INFO: Tips are ABORT
That means ODP.net cannot be installed in an existing home to Oracle. If this is not the case, how can I install it separately to get the job of EPMA.
OK got it works by manipulating inventory. It seems that there is an old facility that was causing the problem.
-
Problem with the listener in environment of multiple databases
Hello world!
I have a server that is running about 10 databases. And 5 listeners who manage these databases. Some listener manage 1 DB, another can handle more than 1.
Listener ESSENTIALS that I create the first run (top of the listener.ora file), only 2 DB. But when I show the status of the listening port, it shows the listener to manage all DBs.
Another listener works normally.
Could you help me solve the problem?
Thank you!
TuanNV
You must set the LOCAL_LISTENER parameter in each instance to control what other they register with. You have probably enabled by default, so they all register with all that is listening on port 1521.
Moreover, some people here get mad at the idea of running more of a listener. Be warned.
-
The listener supports no services
Hi all
I installed Oracle Database 11 g 2 and Oracle network on a Linux infrastructure, then I created the
orcl
database.I've always been able to connect to my database using SQL * more or OEM. But lately, I am experiencing a problem when you type the command
lsnrctl status
, and so I am not able to connect to the database.My
listener.ora
file:# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/grid/network/admin/listener.ora
# Generated by Oracle configuration tools.# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = pc.company.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.example.com)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = pc.company.com) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracleWhen you type
lsnrctl status
, I get the following:LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-JUL-2014 03:35:48
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-JUL-2014 03:25:58
Uptime 0 days 0 hr. 9 min. 50 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/diag/tnslsnr/pc/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=pc.company.com)(PORT=1521)))
The listener supports no services
The command completed successfullyWhen you type
sqlplus / as sysdba
thenstartup
, I get this:ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/orcl/spfileorcl.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/orcl/spfileorcl.ora
ORA-29701: unable to connect to Cluster Synchronization ServiceThanks in advance
Your listener 'supports no service' is because your database is not and therefore does not not with the listener. There is nothing wrong with your listening.
The reason that is not from your data base is written in the startup error message. "Seems to me that it cannot find the spfile (first file in the boot sequence) because it's about ASM and you're"
unable to connect to Cluster Synchronization Service"
Is your ASM instance started successfully?
Maybe you are looking for
-
my service tech remove thunderbird because we do not support, but I still prefer AND it had ALL my addresses top. Is it possible to get it back?
-
How can I install my graphic custom, self-created Persona / theme that I use on my XP computer on my Windows 7 Firefox? (Firefox 17.0.1 Windows 7 64 bit home edition? (There is, as far as I know, no 'little Fox' icon visible below on the left!) I use
-
Albums not appearing is not in iTunes.
Hello world I recently discovered an old cover of CD of mine while moving and add albums to my iTunes library. Everything was going well until I noticed that after a while albums where not appearing only not in my library, they are imported but not l
-
I've had my Mac Mini for a little over a week now. Initially I was using a Windows keyboard and mouse, and everything worked fine. Then, a few days ago I got the wired Mac keyboard and mouse. I really like it - but - mouse sometimes jumps to one of t
-
CHKDSK error after replacing screen
Hi all I have an old T60, I am preparing to give to my mother. To get this loan, I have replaced the screen SXGA + dead with a XGA almost nine. Everything went well, the new screen is beautiful and probably better for my mother, since there res more