CHKDSK error after replacing screen

Similar Questions

• Pavilion g6 - 1d18dx turns is not on after replacing screen

  Hi all

  I have a HP Pavilion 1d18dx g6, which lights up ANY after that I replaced the screen. The power lights do not light when I press the power button. When I plug in the AC adapter, the light near the orange plug is not even turn on. I also tried to plug in the AC adapter without the battery inside, but again - nothing.

  I replaced the screen because he had cracked after that I walked on it. Although the screen was broken, the computer itself has worked well. I continued to use it with an external display.  After what seemed to be a successful replacement, I pressed the power without answer button.

  My question is: I did something wrong during the replacement of the screen?  I need help to determine what went maybe wrong and what parts I should look / replace. HELP /.

  PLEASE AND THANK YOU

  Product number: B3P85UA #ABA

  Hi @brisl0 ,

  Thank you for visiting the Forums HP's Support and welcome. Thank you very much for the detailed information on the replacement screen. Here is a list for your page 72 of the manual. Page 70 has the power on that connector. That should be checked as well.

  I inspect the motherboard in order to have a crack or damage on it.

  I hope this helps.

  Thank you.

• Sony Z3 Proplems after replacement screen

  Hello

  My Sony Xperia Z3 after replacing new screen, I tested the screen that was the real work, but after he correct that no picture, does not and see the red light...

  After a lot of testing active phone with sony pc Companion... and I flash with android 5.1.1

  I hear the sound when I turn the phone on... but no image on the screen... I try change with the new screen but no picture also.

  When using the charger I see the red light 15 second after that the Orange light.

  the MRI technician,

  wait for help and thank you

  @Dizell

  I'm running out of ideas, you can try a different flex cable

• The experience of blue screen error after replacing the hard drive

  bought a new hd.   have windows 7 pro on the computer that goes blue screen in about 5 minutes after the start.

  diagnosis indicated the bad hard drive.

  I think I have an oem copy,

  key # is

  [Deleted by MaRoselle Cag]

  I was able to copy a version of windows 7 online and enter the key number?

  I have also another computer with vista dell on what does not work but the os system is fine.

  What is my best alternative for windows on this machine?

  any help appreciated

  Hello

  Thank you for reaching out again.

  We would be happy to help you. For more information on the Windows 7 download, please click on here.

  Please do not hesitate to contact us if you need assistance.

  Kind regards.

• SMART hard disk error after replacing HD

  Hello!

  I SO hope that this someboidy is able to help me.

  I'm NOT a novice but I am confused.

  I replaced with the same model HD HD CQ58 provided with COMPAQ because the old HD was shot - how it happened escapes me.

  Anyhoo, after screwing a new HD I wanted to put OS on it, but I get the following error just after pressing set button / stop:

  SMART disk error

  INTELLIGENT drive control has detected an imminent failure. So no los data, please backup the content immediately and run the system diagnostics hard drive.

  Hard drive 1 (301)

  F2 System Diagnostics

  ENTER - Continues start

  For more information, please visit: www.hp.com/go/techcenter/startup

  I will return the LINK later.

  First of all, I pushed ENTER. What has emerged is:

  Not found boot device

  Please install an operating system on your hard drive

  Hard drive (3FO)

  F2 System Diagnostics

  For more information, please visit: www.hp.com/go/techcenter/startup

  I pressed F2 and this is what happens:

  I get the diagnostics Menu.

  Version 1.6.0.0 - BIOS

  For more information, please visit: www.hp.com/go/techcenter/PCDiags

  Memory test

  Check the hard disk

  Language

  Output

  I pressed Hard Drive Test is the "Quick Check" and that is the message I get:

  INTELLIGENT control: NOT AVAILABLE

  DST short: NOT AVAILABLE

  ==============================

  For more information, please visit: www.hp.com/go/techcenter/PCDiags

  I tried the LINK, it does not exist.

  I also went in the Boot Options in the BIOS to boot from a USB and put the USB HD in the first place.

  When I restart it does not recognize a USB key. I tried Windows 8 and UBUNTU which ususally works on all the machines I've fixed so far.

  No chance whatsoever.

  As I mentioned earlier:

  I'm puzzled.

  I have no recovery CD and cannot make one because I'm not running Win8 on any of my PC.

  Thus, any suggestions?

  Help, please

  Thanks in advance

  Henry of Kai

  First of all:

  Thank you all very much for taking the time and you answer!

  And now, for what happened after I did all what has been proposed:

  Nothing.

  The message remained the same.

  Still no hard drive (even if it was new)

  Then I took a hard drive to work with Win7 on it from another machine, put it in the Compaq and... nothing.

  I tried the USB with Win8 (NTFS with Rufus) does not.

  I don't know why, I tried again, but when I used the same USB with UBUNTU Live - 14.04. on that I had taken or tried before... He recognized at startup.

  Weird hard drive wiped completely since it was not recognized by the BIOS (one with Win7 on it... data paths but I had backup ).

  So, now I'm running the faithful Tahr on the Compaq and it works fine.

  I will try to put the original Win8 on it, but the system doesn't seem like more since USB NTFS NTFS are not recongised at startup.

  Well Anyhoo, I got the machine to work.

  Would have been nice to know what was wrong with him to solve future problems, but at least I had to register in this forum

  So I could bore you guys with questions in the future.

  Take care

  Kai

• Fatal error after replacing msvcrt.dll

  Once connected, I was getting an error in msvcrt.dll so I downloaded the latest version of microsoft.com and installed. After restarting my computer, I get today a fatal error and restart the computer. I saved a backup of my old msvcrt.dll file, but I can't restore. Boot in safe mode does not work.

  I'm afraid I have to reformat but I don't want to lose all my files, if there is anything that I'm missing, it will be very appreciated.

  You will have to start on something.

  If you have a CD/DVD drive. Are you doing a Hiren boot CD and use the XP Mini environment for basic file manipulation and of many other useful tools for these emergencies.

  The latest Hiren's version is 11.0 at the bottom of this page:

  http://www.hirensbootcd.NET/

  Once started on the CD, XP Mini environment looks like and feels like XP, so you'll be comfortable with his familiarity and can replace the file with your copy.

  Then you can fix everything that's really your problem of msvcrt.dll.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Press ID not working after replacement screen

  Hello

  Recently, I dropped my phone and cracked my screen, the touch screen no longer works, but the fingerprint was not working.

  I managed to take it to the local store (no apple store or authorized dealer). They agreed the phone and asked me if I can provide the access code that I refused to provide. Still, they accepted the phone saying they can fix. A few hours later when I revisited the store that they had replaced the screen and when I checked all the features, I was able to identify that the touch (fingerprint) ID does not work, when I went to the print options settings in the menu of finger contact ID is gray. When I asked they claimed that it is because I could not give the access code that sounded ridiculous.

  I stayed in the store, while he was rechecking and since I am available I can also provide the access code when its need. Still, it failed to fix it.
  I think they have distorted or damaged the hardware component that is associated with the contact ID.

  They probably changed the home button when they replaced the screen (ask them). If it does get them to return the knob to the original House and if they still have it. If they don't have it, or they have damaged this replacement of the screen, you can't use the contact IDS.

• Acer 5420 won't accept password after replaceing screen

  the laptop was dropped and cracked screen. the log in screen appers normal but the password keeps getting rejected

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• 3D Issue of the Qosmio F755 - 3d 350 after replacing the screen

  Hi, I had a problem with my Toshiba Qosmio F755 3D350 broken LCD screen and I have to replace it with a new screen.

  The new screen is the same model: B156HB01 V.0 of electronics AU, who had the original on my laptop screen.

  everything works fine resolution, the camera, but when it comes to 3D it doesn't have the Leds on the webcam is not turn on and activate the wiggle stereoscopy.
  How do I activate again the 3D or where is the problem?

  Thank you.

  Hello

  As far as I know after LCD (screen) or webcam or Exchange/replacement disassembly it s necessary to calibrate the LCD screen 3D sensor chip using special 3D calibration tool.

  This calibration can be performed by the Toshiba authorized service provider only!

  It seems that you have no choice to contact the ASP in your country to make this 3D calibration.

• HP Pavilion dv6: System recoovery after replacing the HD because of the disk hard 301 error

  I have problems with the original of my HP Pavilion dv6 PC hard drive portable. I get an alert (SMART disk error 301) every time that I reboot, but I can still load my Windows 7.

  I just bought a new hard drive (SSD SATA3), but I would like to recover my original OS using my license key.

  How can I do? Should I create a partition on the new disk (D, copy the contents of my RECOVERY disc and use Esc + F11 after reboot?) Do I need a recovery CD/DVD? In this case, can I create one of my system?

  Thanks in advance.

  Hello
  
  Drive smart error 301 indicated fall drive hard/failed hard drives
  
  If you have recovery disks, no need for product key, insert the disc after replaced by the new fair SSD & insert the recovery disks to reinstall everything, including the recovery partition.
  
  You can also order HP recovery discs
  
  You must ensure that the size of the SSD is equal to or greater than the size of the previous HARD drive to perform successfully the recovery discs recovery.
  
  If you have not created recovery disks, you can create one - http://support.hp.com/us-en/document/c01867418
  
  Back up all your personal data now first.
  
  Thank you

• Remove the error and check the time cartridge after replacing my black cartridge in my HP 7200 printer.

  After replacing my black cartridge in my HP 7200 printer, it says remove and check right cartridge. It also says this if I put the old cartridge in. Worked well before ink has low cartridge-more

  Cartridge OT:Ink

  Hi Jim,.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  What operating system is installed on the computer?

  I suggest you try the steps from the following link:

  Error message: remove and check ink cartridges
  http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00054462&LC=en&product=391151

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• HP Pavilion g4 2131tx, hard disk after Blue Screen of Death error

  Hello! I do not know what section shoud I post this problem, I apologize for that.

  If my phone is freezing for days after BSOD. When I leave my laptop at night to download torrents, I always get the message "Windows has recovered from stop unexpected." when I woke up.

  I already disabled all non microsoft services, startup items and yet the office is always freezing just after the Welcome screen, but the Welcome screen does not load too long.

  The freezing of funds of more than one minute, and then it will return to normal again until my laptop went to BSOD
  and received this error of UEFI "Disk hard error" after restart.

  I ran the Diagnostic Test of equipment and got the result:

  Failure ID: RW042K-6MT6RP-MFPX1F-61BK03
  Product ID: 65H69PA #UUF

  I tried registry cleanup and defragment the disk and still no luck.

  * My laptop is HP Pavilion 2131tx g4 and still under warranty until June 2014.
  * I use Windows 7 Ultimate 64-bit Service Pack 1
  * My RAM is 4 GB with an Intel Core i7 processor
  * My AV is microsoft security essentials
  * I use Advanced SystemCare for registry cleaning and Defrag.

  I was wondering if I could change my drive hard while it is still under warranty.

  Thanks for your help!

  #Edit: bad English >.

  Here is the Service Manual:

  Manual

  See Page 39. It can take any 2.5 inch wide 9mm thick laptop SATA hard drive. They are the industry standard, interchangeable.

  Here's one that I would recommend:

  http://www.Newegg.com/product/product.aspx?item=9SIA2W00YW3532

  It is a compromise that is friendly with size, speed and spending. You could install an SSD for maximum speed. Post back if you need help with the software or anything else.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• get the error with epson Stylus 845 printer after replacing ink

  replacement of original ink title: workforce 845

  Epson Stylus 845

  Single cartridge need replace however, after replacing the cartridge, it displays an error saying to turn the printer off and then back on.  When the printer returns to the top it either comes up with the same error or you request to replace a different cartridge and then ends with the original error start the cycle again.

  All four cartridges have been replaced and all are 127 cartridges.

  Help!

  Thank you

  Randy

  Hi Randall,.

  Thanks for posting of queries on Microsoft Community Forums.

  According to the description you provided, I understand that you have a hard time with the printer.

  I would like you to follow the links provided to solve the problem with the printer:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If the problem persists, please contact Epson support:

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=184583&infoType=contact

  If you need help with windows, just tell me and we will be happy to help you

• Error: 150:30 after replacing the hard drive

  After replacing my hard drive of Apple iMac (Apple remember), I get an error code 150:30 when trying to open Photoshop CSCS4. Spin OSX 10.11.1

  All solutions?

  John

  150:30 errors mean that the licensing mechanism is broken, usually because the software moved instead of being re-installed.

  Uninstall, reinstall from the disc or download then enter your serial number.

  Download the CS4 products

• After reinstallation of my dear old Photoshop CS4 of backup external drive after replacing my drive hard, I got an error message (147,20) that my license has expired. I have used the program for years, but he must have downloaded it, because I can't find

  After reinstallation of my dear old Photoshop CS4 of backup external drive after replacing my hard drive, I received error (147,20 and another trial, error 6) messages my license was not working. I have used the program for years, but must have downloaded, because I can't find an original backup drive. I can't afford to upgrade, so for now am limping with Photoshop 6. What can I do?

  If you can spare $10 per month, you can have the latest Photoshop and Lighroom

  Lightroom and Photoshop | Plan of cloud of Adobe's creative photography

  Get it directly from Adobe, you can have CC 2015, or CS6, Mac or PC.

  Do not go without

  Gene