Issue when executing dynamic action

Similar Questions

• Validation on the page point is lost when creating dynamic action button

  
  Nice day

  I have some page elements like empno, job etc in my application to learn the goal where I validations

  to check the length of the point/numeric field and check for null

  I have 4 buttons [create, delete, cancel, apply changes] do dml basic operation

  Initially, all validations were shot when there was not any trigger attached to the buttons

  Once a dynamic action was created for a button by button create account to make these features as the insertion in arrays that are passed as a packaged procedure

  It works in all cases (for example) even if an entry is garbage does is allow inserts into the table and all the controls as EMPNO, JOBNO validations are ignored

  How can we ensure that these validations must be taken into account first and fired before and only if it is a valid entry before you create key

  otherwise it should always display error message when you enter invalid

  Tried to use the point of application by the shared components, then set value of Validation for function returns the error text a different value for the same point of the application

  [Like global variable]

  Don't know if the method described above is correct but stuck in this

  Not too much competent in JavaScript and didn't want to try if there is any possibility

  Kindly help on this

  Thank you

  Why not use page instead of dynamic action processes, they fire after validations

  Gus

• Can not set a value by the executed dynamic action on the page element "selection list."

  I created an agenda of the page 'list of selection' and I want to when I change a value in another element of the page set only 'screen '.

  I created a dynamic action on the page element "selection list" for this.

  These are the dynamic action attribute:

  When:

  ======

  Event: change

  Selection type: point

  Article: P29_PURCHASE_ORDER

  Condition: No strings attached

  Advanced:

  ========

  Scope of the event: static

  Identification:

  ==========

  Action: Set

  The ' Action Page when the changed value "attribute of the element of 'list of selection' = 'None', and when I run form the dynamic action run and set the value for once and do not update the value according to the change in the article"list of selection. "

  Note: when I change the previous attribute of 'Redirect and set', dynamic action run and properly value, but the value was hidden soon

  I want to value when the value of change of select list according to this change successfully.

  Please, advice me,

  Best regards

  Mustafa Ezzat

  Hello

  you set the value of the 'Page elements to submit' to P29_PURCHASE_ORDER?

  Then, the SQL statement would use the current selected value.

  This is the help text says: "specify a list separated by commas of the elements of the page that will be submitted to the server and therefore available for use in your"SQL statement"," PL/SQL Expression"or"Body of the PL/SQL function".»

  Kind regards

  Erik-jan

• Issue when executing the planning of business rules

  Hello
  
  I get the following error when trying to run a Planning Business Rules of EPMA production environment. The same rules of business work without any problem in UAT which is exactly in line with the production.
  
  Getting the following message while starting business rules:
  
  Error detected while trying to perform the work: naming rules
  
  Newspaper:
  
  [ACTIVE] ExecuteThread FATAL: '2' for queue: com.hyperion.planning.calcmgr.HspCalcMgr '(self-adjusting) weblogic.kernel.Default"- cannot run validateRule(). An error occurred when executing the specified calc script. See the log for more details.
  -Cannot run validateRule(). An error occurred when executing the specified calc script. See the log for more details.
  
  FATAL Thread-2352 calcmgr.launch - Server/Application/base of data: localhost Business Rule Name: user: M05 FP data planning.     Exception: com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.
  
  com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.
  
  Please could someone tell if you're aware of something like this?
  
  Thank you
  Jean

  Remove essbase Server console of Regional service,
  Add Server Essbase with IP address or host name and try again.

• In cascade LOV and calling a javascript function thro dynamic action

  We have a page where there are lovs cascaded to the country / state. The selection of State list is cascaded with country LOV. We also request a javascript to normalize the child lov (State), so that if there is no value in the list, the lov will be disabled and if there is only one value for show, which will be set as default (enabled). However, it seems apex runs javascript code standardize everything first and then generates the list for the lov State, then the State lov is always disabled.
  
  I created a page similar to apex.oracle.com with choice of Department lists and employee. The link to the page is http://apex.oracle.com/pls/apex/f?p=40631:2
  
  In this page, the employee selection list is cascaded to the Department. (1) to any value other then 'IT' or no selection value in the list of DEPARTMENTS, the list of employees must be enabled and should list all the names of appropriate employees. (2) for the selection of the 'IT', it should be disabled with the default selection as "no data found". However it does not for 1). Could someone find the problem and give a possible solution.
  
  Javascript code executed (that thro NatStandardizeLOV1('P2_EMPLOYEE') dynamic action for Department change is lower.
  
  < code >
  function NatStandardizeLOV1 (pitem)
  {
  var obj = document.getElementById (pitem);
  obj. Disabled = false;
  obj.options [0]. Text = "SΘlectionner one..";
  
  
  If (obj.type is "select one")
  {
  
  If (obj.length == 1 & & (obj.options [0] .value == ": obj.options [0] .value == null))
  {
  obj.options [0]. Text = "No. Data."
  obj.disabled = true;
  }
  If (obj.length == 2 & & (obj.options [0] .value == ": obj.options [0] .value == null))
  obj.options [1]. Selected = true;
  }
  }
  
  
  < code >
  
  Thank you in advance,
  
  Natarajan
  
  Published by: Nikita on May 27, 2011 04:21

  Natarajan,

  The question is one of the time. You're service is running before the Ajax request (triggered by the LOV cascading) brings back the items. So change the 'when' of dynamic Action so that it fires the event "After Refresh" of the question of the Department rather than the event change.

  Kind regards
  Dan

  blog: http://danielmcghan.us/
  work: http://SkillBuilders.com/APEX/

• dynamic action sets the value of the element, but not save to DB on submit

  I'm working on a page where the value of several to show only the page elements are defined using a dynamic Action.  They are set when the user selects a value in a list of selection (and is based on the value of the selection list).  Dynamic action is triggered on a list selection change event and then runs the real action "set the value.  The selection list displays the names of sales representative.  The three fields dynamically filled are the org structure (that is, their chain management).

  For the action to set the value, I use a defined Type of SQL statement:

  Select VP, DIR, MGR

  of SALES_ORG where SSR =: P20_SSR

  In the affected elements, I have fixed Type of selection to the 'item (s)"and the value of the Item (s) for 'P20_GVP, P20_DIR, P20_MGR.

  Dynamic action works fine for the display of the page (that is, when I select a sales representative in the selection list dynamic action properly updated only display value fields three).  This page is a form in which the user submits information relating to the rep.  When the page is sent, all fields are filled in a new record of DB with the exception of three that were populated dynamically above.  These fields get the values NULL.

  When the dynamic action updates the values in the three fields is - it does not set the value of session?  Why these fields don't are not taken into account in the submit other ideas > process Page?

  I use 5 APEX with Chrome on Mac (Yosemite).

  Thanks for the note.  I didn't only display the items could not be used in this way.  I think I'll take a different approach with the design; given that the org structure is in another table that I can simply refer to that by rep when necessary rather than saving the information uploaded to the page of the form.  The reason why I have not fill the screen only the points of loading the page is because I don't know what the values should be until the user selects a sales representative in the selection list.

  I'll change the design to one of the following:

  1) change the display only items of standard text field.  NOTE: if I make the text read-only field that causes other problems when loading (I get the message "violation of protection Session state").

  OR

  2) do not include org structure in the download folder and just refer to table org Rep when necessary.

  Thank you!

  Steve

• Level elements dynamic Actions and application

  Request Express 4.1.1.00.23
  
  
  I searched everywhere for an answer on this one and I can't seem to find it. Is it possible to have a dynamic action to interact with an element of application level? If it is possible, is able to have the value field in the when a dynamic action article contains a comparison operator?
  
  An example of a real case would be:
  
  
  Element level application F111X = X
  
  Dynamic action on P4_Item is triggered and disables the field
  
  Case of falsification:
  
  Element level application F111X = Y
  
  Dynamic action on P4_Item is not triggered and the field remains active.
  
  Thank you
  Jon

  Jon,

  I'm looking for an example, and if I use your article page P4 in the box 'When', event could be the change, Type of selection would be the page element.
  P4 would be selected in the drop-down list item (s), Condition would be equal to and value would be TEST with NO quotes!

  It is difficult for me to know when the values of the quote and when not.

  What is it?
  Howard

• Cannot perform the insert/update on the form of tables, due to the dynamic action

  Hi all
  
  I created a dynamic action that calculates multiple cells in a table.
  
  This feature works well, when I change the value of the associated cell then the computed value is changed by the dynamic action.
  
  But I am not able to insert or update the line in a table when the dynamic action is enabled. When I put the condition 'Never', then the line is inserted or updated without any problems.
  
  All guess where is the problem?
  
  Apex version: 4.1.1.00.23
  
  Jiri

  Nina wrote:

  I don't know why the 123,40 value (or other) is set to the next item in line (f09, fsc, etc.)
  >

  What is hidden and generated Apex elements are always included in the last cell (td) of the line. Thus, it has nothing to do with the next item, only the last cell.
  If you see the last cell of the 888 Page you will see probably the same type = "hidden" entries here also.

  Your problem is not related to the HTML fragment to the last cell in the row showing all those extra items, it's somewhere else.

  Oh, here comes the jQuery selector:

  var clickedRow = $(this.triggeringElement).closest('tr');
  
  $(clickedRow).children('td[headers="SAL"]').find("input").val(myCalculatedTotal);
  

  SAL, COMM, w/e. here you will find the TD with headers = "COMM" and all the input fields and the value of all the entries in total calculated. Your selection is not precise enough in this case.
  So, target the specific entry.
  With the code example:

  
  Comm
  
  
  
  
  
  
  

  change the switch on

  $(clickedRow).children('td[headers="SAL"]').find('input[name="f08"]').val(myCalculatedTotal);
  

• Performance issues with dynamic action (PL/SQL)

  Hello!

  
  I have problems of perfomance with dynamic action that is triggered on click of a button.

  I have 5 drop-down lists to select the columns that users want filter, 5 drop-down lists to select an operation and 5 boxes of input values.

  After that, it has a filter button that submits just the page based on the selected filters.

  This part works fine, the data are filtered almost instantly.

  After that, I have 3 selectors 3 boxes where users put the values they wish to update the filtered rows and column

  There is a update button that calls the dynamic action (a procedure which is written below).

  It should be in a straight line, the issue of performance might be the decoding section, because I need to cover the case when the user wants to set a null (@), and when it won't update the 3 columns, but less (he leaves ").

  That's why P99_X_UC1 | ' = decode(' ||) P99_X_UV1 |', "«,» | P99_X_UC1 ||',''@'',null,'|| P99_X_UV1 |')

  However, when I click finally on the button update, my browser freezes and nothing happens on the table.

  Can anyone help me solve this problem and improve the speed of the update?

  Kind regards

  Ivan

  PS The procedure code is below:

  create or replace

  DWP PROCEDURE. PROC_UPD

  (P99_X_UC1 in VARCHAR2,

  P99_X_UV1 in VARCHAR2,

  P99_X_UC2 in VARCHAR2,

  P99_X_UV2 in VARCHAR2,

  P99_X_UC3 in VARCHAR2,

  P99_X_UV3 in VARCHAR2,

  P99_X_COL in VARCHAR2,

  P99_X_O in VARCHAR2,

  P99_X_V in VARCHAR2,

  P99_X_COL2 in VARCHAR2,

  P99_X_O2 in VARCHAR2,

  P99_X_V2 in VARCHAR2,

  P99_X_COL3 in VARCHAR2,

  P99_X_O3 in VARCHAR2,

  P99_X_V3 in VARCHAR2,

  P99_X_COL4 in VARCHAR2,

  P99_X_O4 in VARCHAR2,

  P99_X_V4 in VARCHAR2,

  P99_X_COL5 in VARCHAR2,

  P99_X_O5 in VARCHAR2,

  P99_X_V5 in VARCHAR2,

  P99_X_CD in VARCHAR2,

  P99_X_VD in VARCHAR2

  ) IS

  l_sql_stmt varchar2 (32600);

  nom_table_p varchar2 (30): = ' DWP. IZV_SLOG_DET';

  BEGIN

  l_sql_stmt: = "update". nom_table_p | 'set '.

  || P99_X_UC1 | ' = decode(' ||) P99_X_UV1 |', "«,» | P99_X_UC1 ||',''@'',null,'|| P99_X_UV1 |'),'

  || P99_X_UC2 | ' = decode(' ||) P99_X_UV2 |', "«,» | P99_X_UC2 ||',''@'',null,'|| P99_X_UV2 |'),'

  || P99_X_UC3 | ' = decode(' ||) P99_X_UV3 |', "«,» | P99_X_UC3 ||',''@'',null,'|| P99_X_UV3 |') where ' |

  P99_X_COL | » '|| P99_X_O | » ' || P99_X_V | «and» |

  P99_X_COL2 | » '|| P99_X_O2 | » ' || P99_X_V2 | «and» |

  P99_X_COL3 | » '|| P99_X_O3 | » ' || P99_X_V3 | «and» |

  P99_X_COL4 | » '|| P99_X_O4 | » ' || P99_X_V4 | «and» |

  P99_X_COL5 | » '|| P99_X_O5 | » ' || P99_X_V5 | «and» |

  P99_X_CD |       ' = '         || P99_X_VD;

  -dbms_output.put_line (l_sql_stmt);

  EXECUTE IMMEDIATE l_sql_stmt;

  END;

  Hello Ivan,.

  I don't think that the decoding is relevant performance. Perhaps the update is suspended because another transaction has changes that are uncommitted to any of the affected rows or where clause is not quite selective and has a huge amount of documents to update.

  In addition - and I may be wrong, because I only have a portion of your app - the code here looks like you've got a guy here huge sql injection vulnerability. Perhaps you should consider re - write your logic in the static sql. If this is not possible, you must make sure that the entered user contains only allowed values, for example by P99_X_On white list (i.e. to ensure that they contain only values known as 'is', ')<', ...),="" and="" by="" using="" dbms_assert.enquote_name/enquote_literal="" on="" the="" other="" p99_x_nnn="">

  Kind regards

  Christian

• value of the element is not common when used in dynamic action

  I'm learning the 5 apex and I wanted to create a page that would update the fields in a record by entering the unique id of the recording using a dynamic action with plsql.

  When I click on the button update the value of the element of the text uses the previous value and not the input current. The 'works' update, but the ID values are not appropriate.

  How can I make sure that when I click on the update button, the dynamic action will get the current value of the text element and not the previous (when the page was submitted)?

  I created a quick demo or what I was testing in apex.oracle.com and always gives me the same result.

  dacoellov wrote:

  I'm learning the 5 apex and I wanted to create a page that would update the fields in a record by entering the unique id of the recording using a dynamic action with plsql.

  When I click on the button update the value of the element of the text uses the previous value and not the input current. The 'works' update, but the ID values are not appropriate.

  How can I make sure that when I click on the update button, the dynamic action will get the current value of the text element and not the previous (when the page was submitted)?

  I created a quick demo or what I was testing in apex.oracle.com and always gives me the same result.

  What dynamic action event and what types of action are involved here? Provide details, or better yet share identification information of developer comments for the apex.oracle.com workspace so that we can see the demo.

  If the dynamic action executes an SQL statement or a PL/SQL process on the server that requires page updated element values in session state, specify these items as part of dynamic action Page to submit items .

• Dynamic action to execute PL/SQL that calls a JavaScript alert - does not

  Greetings,

  I'm stuck!  I use the Apex Version 4.2.2.  I have a requirement that, when the user fills Field1, I check the database to see if the value of field1 has already been used.  If it was used, I have to inform the user, but the user is allowed to reuse the value - that is to say, duplicates are allowed.  My thought is to use a dynamic action to check the onchange of value running pl/sql to check (via a function in the database) and if it returns true, use a javascript alert to inform my user value is used.  They can then close the alert and change (or not change) the duplicate value

  I did the following:

  1 wrote a PL/SQL function in my utility package in the database - we'll call it apps.my_utils.check_value_use (p_my_val in varchar2) return Boolean - it works.

  2. created a dynamic Action with the following properties for P1_FIELD1:

  Event: change

  Selection type: item (s)

  Product (s): P1_FIELD1

  Condition: is not null

  3. the dynamic Action has an action - real Action

  Action: Execute the PL/SQL Code

  Page items to submit: P1_FIELD1

  PL/SQL code:

  BEGIN

  IF apps.my_utils.check_value_use(:P1_FIELD1) = TRUE THEN

  HTP.p ("< script type =" text/javascript "> '");

  HTP.p ("alert (" this value is used ""); ")

  ');

  HTP.p ("< /script >" ");

  END IF;

  END;

  When I run the page and fill in Field1 with a value that I know is in use, I get the following error:

  Error: parsererror - SyntaxError: JSON.parse: unexpected character

  Help, please.  I already spent too much time on this apparently simple requirement.

  Thank you

  J.

  BEGIN

  IF apps.my_utils.check_value_use(:P1_FIELD1) = TRUE THEN

  HTP.p(' ');

  END IF;

  END;

  Avoid doing this. Try the following method:

  (1) create a dummy hidden element to store the result of your validation of PL/SQL. Lets call it P1_DA_ERR

  (2) in your PL/SQL block put this point hidden in the field "Page point back.

  (3) in your PL/SQL block placed the result of your validation in this element hidden as

  DECLARE
  l_err PLS_INTEGER := 0;
  BEGIN
  -- An example
  IF 1=1 THEN
  l_err := 0;
  ELSE
  l_err := 1;
  end if;
  :P1_DA_ERR := l_err;
  END;
  

  (4) add a true other "Run Javascript code" type action. The could should look like:

  if(parseFloat($v('P1_DA_ERR'))==1)
  {
  alert('Error occurred');
  }
  

• APEX 4.0: Dynamic action problem when hiding point page

  Hello world
  
  I created a dynamic Action that shows/hides a page element.
  When hide it, if this page is a text box, object, which resizes texarea is still visible... as well as quickpicks (as appropriate).
  If point page corresponds to a date, and quickpicks, quickpick labels are invisible, but the commas that separate them are still visible. Fortunately, date picker icon is hidden.
  
  I hope this helps
  Oscar
  
  PS: Tested on apex.oracle.com using IE8

  Hi Oscar,.

  Thanks for this posting. This is a known bug (#9811411) with dynamic stock control show or hide an element of the page currently only the following:
  

  • The item itself (the input, textarea, etc.).
  
  
  • Any other standard compound element (datepicker, color picker icon, all the list items Manager, shuttle elements, etc.).
  
  
  • An element label, if defined in the standard way (tag with an attribute 'for' corresponding to the attribute 'id' elements).

  We do control however no other currently defined attributes in the element definition (pre / post text, quick pick item controls, control center, etc.).

  There is a fairly simple solution, and it is to check the box 'Yes' to the ' show / hide all elements of the page on the same line "in the"Setting"region in the actions of 'Show' and 'Hide '. This will control everything, but the limit that you should not have any other elements on page displayed on the same line, because these will be also shown / hidden by doing this.

  Sorry for this current issue, I hope that the workaround can be useful until we can fix.

  Kind regards
  Anthony.

• Dynamic action: need to refresh the area when changing value radio button

  Hello

  I use Apex 4.2 worm.

  I need to apply a dynamic action with the refreshment area.

  I need to refresh the area when I change the value of the radio button.

  To do this, I created dynamic action on the changes and select the refresh option to update the region.

  But it does not.

  If you want to check, then see below for workspace:

  Workspace: APEX_ISSUE

  User name: [email protected]

  Password: kaushik1@34

  Please use Page no 5.

  Thank you

  Hi Maxence,

  CORINE wrote:

  Hi Kiran

  Thank you very much.

  It works very well.

  One more I need help, I need to scroll in the radio button because I'm showing type of booking successively from top to bottom.

  How can I set scrolling in the option box.

  Thank you

  What do you mean by scrolling in the option button?

  I applied a horizontal scrolling for the region containing radio buttons by using the suite in the attributes of the region:

  style="overflow-x:scroll;"
  

  If you apply the change just of vertical scrolling x to y.

  I hope this helps!

  Kind regards

  Kiran

• How to run dynamic Action when clicking on a link in a report

  APEX V4.2.3

  DB EA 11.2

  APEX listener V2.0.5.287.04.27

  13 blue-gray theme

  IE9.0.8112

  FF26.0

  I have classic report and I would like to launch a dynamic action (together a show has confirmed and the value of the alert, submit the page, then run a process) when the user clicks on a link in a report or click on #ID #.

  I can write the real actions that I just need to know what to write behind the report link that will serve as a trigger for the DA?

  Thanks in advance

  PaulP

  It's the link attribute

  onClick = "if (confirm (' do something for #ENAME # with EMPNO: #EMPNO #'")) {$s('P5_ENAME_CLICKED','#ENAME#') ;};$s('P5_ID_CLICKED','#EMPNO#');doSubmit()""

  It's getting a bit long on a single line, if you want, put it in a function

  However, fixed, forgotten pair of single quotes as soon as possible.

  Now you have 2 bind variables to use in the process of page after submit.

  : P5_ENAME_CLICKED and: P5_ID_CLICKED

  I've updated the example page, http://apex.oracle.com/pls/apex/f?p=14308:5

  Good luck.

• APEX dynamic Action issue with custom button template

  A new day and a new problem. -.-

  I wanted to create a dynamic action, if a button is clicked and got the error "the selected button uses a 'button model' which does not contain the #BUTTON_ID substitution string #. So I googled a bit und found issue with action Dynamics apex. I thought that this would solve my problem and I looked in the model button to find this:

  <table class="t15Button" cellspacing="0" cellpadding="0" border="0"  summary=""><tr>
  <td class="t15L"><img src="#IMAGE_PREFIX#themes/theme_15/button-l.gif" alt="" /></td>
  <td class="t15C"><a href="#LINK#">#LABEL#</a></td>
  <td class="t15R"><img src="#IMAGE_PREFIX#themes/theme_15/button-r.gif" alt="" /></td>
  </tr></table>
  

  A former colleague created the model itself and I do not know where to insert the #BUTTON_ID #. Does anyone have any suggestions?

  Concerning

  Chris

  Miss you atrribute button ID,

  is the correct code

  
  
  #LABEL#
  
  
  

  I hope this works.

  Go