value of the element is not common when used in dynamic action

Similar Questions

• dynamic action sets the value of the element, but not save to DB on submit

  I'm working on a page where the value of several to show only the page elements are defined using a dynamic Action.  They are set when the user selects a value in a list of selection (and is based on the value of the selection list).  Dynamic action is triggered on a list selection change event and then runs the real action "set the value.  The selection list displays the names of sales representative.  The three fields dynamically filled are the org structure (that is, their chain management).

  For the action to set the value, I use a defined Type of SQL statement:

  Select VP, DIR, MGR

  of SALES_ORG where SSR =: P20_SSR

  In the affected elements, I have fixed Type of selection to the 'item (s)"and the value of the Item (s) for 'P20_GVP, P20_DIR, P20_MGR.

  Dynamic action works fine for the display of the page (that is, when I select a sales representative in the selection list dynamic action properly updated only display value fields three).  This page is a form in which the user submits information relating to the rep.  When the page is sent, all fields are filled in a new record of DB with the exception of three that were populated dynamically above.  These fields get the values NULL.

  When the dynamic action updates the values in the three fields is - it does not set the value of session?  Why these fields don't are not taken into account in the submit other ideas > process Page?

  I use 5 APEX with Chrome on Mac (Yosemite).

  Thanks for the note.  I didn't only display the items could not be used in this way.  I think I'll take a different approach with the design; given that the org structure is in another table that I can simply refer to that by rep when necessary rather than saving the information uploaded to the page of the form.  The reason why I have not fill the screen only the points of loading the page is because I don't know what the values should be until the user selects a sales representative in the selection list.

  I'll change the design to one of the following:

  1) change the display only items of standard text field.  NOTE: if I make the text read-only field that causes other problems when loading (I get the message "violation of protection Session state").

  OR

  2) do not include org structure in the download folder and just refer to table org Rep when necessary.

  Thank you!

  Steve

• Containing the height of the element does not Change when the browser text size increased.

  http://www.imagesandwords.org.UK/Les/pages/coursesMentalHealth.php

  So, that ' s the page and this question is on the menu bars.

  When I increase the text size in the browser, most of the page holds together, but as far as I can make out (in FF) the element < ul > increases with the size of the police but the < div > with this element is not.  Then, it seems that the background image protrudes outside the container < div > and it's ugly.

  QA), this is what is happening?

  QB) I can fix it?

  Thank you very much

  Martin

  Your chart of menu is quite simple. Try to replace your sprite image with borders and background colors.

  .menu
  {
  Auto margin: 0;
  padding: 0;
  height: 30px;
  Width: 100%;
  Display: block;
  background: Green;
  border-top: 2px solid Brown;
  border-bottom: 2px solid Brown;
  }

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics |  Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB

• Value of the parameter is not displayed when moving from page of the dialog box

  Hello
  
  The question I face, is that I have a backup button with the logic in the PFR in which I call a page of dialogue that has an OK button. I give the floor to press ok another page. I need to capture a XXParty parameter that I put in the CO LIC key but is not displayed in the central of the PR of the other page that is called when you press the OK button. Probably I'm missing something very small. Any help would be greatly appreciated. Thank you
  
  
  SAVE BUTTON controller LIC... (Call the dialog box and the parameter)
  =============================================
  If (SaveButton! = null)
  {am.invokeMethod ("addNotes", params);  Transaction record.
  System.out.println ("save backwards");
  Try to build your own Page of dialogue here...
  String MainUrl = "OA.jsp?page=xxksms/oracle/apps/imc/ksms/webui/ShipperOverviewPG & retainAM = Y;
  OAException descMesg = new OAException ("XXTSA", "XX_KSMS_SAVED_NOTES");
  OAException instrMesg = new OAException ("FND", "FND_CANCEL_ALERT");
  
  DialogPage OADialogPage = new OADialogPage (OAException.INFORMATION, descMesg, null, MainUrl, null);
  OK button to send back the values of the PartyID for CO of the ShipperOverview Page.
  System.out.println ("The party ID is" + left); It is displayed.
  dialogPage.setPostToCallingPage (true);
  java.util.Hashtable formParams = new java.util.Hashtable (1);
  formParams.put ("XXParty", out); Part definition ID in XXParty.
  dialogPage.setFormParameters (formParams);
  pageContext.redirectToDialogPage (dialogPage);
  
  
  Partial code in the process asks in the called ShipperOverview Page of the dialog box's OK button
  ====================================================
  super.processRequest (pageContext, webBean);
  Am = (OAApplicationModule) pageContext.getApplicationModule (webBean) OAApplicationModule;
  String XXId = pageContext.getParameter ("XXParty"); Try to recover part ID here of page of the dialog box.
  System.out.println ("The PartyID is" + XXId);

  Salvation;

  Try one of these two options.

  1. pass the value of the part directly in the URL & get it 2nd co:
  String MainUrl = 'OA.jsp?page=xxksms/oracle/apps/imc/ksms/webui/ShipperOverviewPG&retainAM=Y&XXParty="+Party;

  2. After selecting the button ok in the dialog box get the parameters in CO 1 himself then using URL forward, send them to CO 2

  If (SaveButton! = null)
  *{*
  * //Your code... *.
  *//..............*
  *//............*

  Default OAException = new OAException ("XXABCD", "XXABCD_GNO_DELETE_WARNING");
  DialogPage OADialogPage = new OADialogPage (OAException.WARNING, default, null, "","");
  dialogPage.setOkButtonItemName ("DeleteYesButton");
  dialogPage.setOkButtonToPost (true);
  dialogPage.setPostToCallingPage (true);
  String lineId = pageContext.getParameter ("lineId");
  Hashtable ht = new Hashtable();
  HT.put ("lineId", lineId);
  HT.put ('actor', actor);
  HT.put ("empId", empId);
  dialogPage.setFormParameters (ht);
  pageContext.redirectToDialogPage (dialogPage);

  *}*

  * combination else if (pageContext.getParameter ("DeleteYesButton")! = null) {*}
  String lineId = pageContext.getParameter ("lineId");
  String = pageContext.getParameter ("actor") actor;
  Var empId = pageContext.getParameter("empId");
  HashMap formParams = new HashMap (1);
  formParams.put ("lineId", lineId);
  formParams.put ('actor', actor);
  formParams.put ("empId", empId);
  pageContext.forwardImmediately ("OA.jsp?page=/xxx/oracle/apps/xxabcd/appraisal/webui/DrillDownPG",
  NULL, KEEP_MENU_CONTEXT,
  NULL, formParams, true,
  ADD_BREAD_CRUMB_NO);
  *}*

  --
  GsrC

• label of an element is not hidden when using $f_Hide_On_Value_Item

  Hi friends,
  
  I use the apex javascript '$f_Hide_On_Value_Item' function to hide an element of text field 'P72_T1' when the value of P72_S1 is I_VAL1. I put the line in the form of P72_S1 HTML element attribute.
  
  OnChange = "$f_Hide_On_Value_Item (This, 'P72_T1', 'I_VAL1')". "
  
  But only the textfield assosiated with this item (P72_T1) hides when you select the value "I_CAL1". Label the assosiated with this text field is still visible.
  
  I am able to hide the label when you use the script
  
  OnChange = "$f_Hide_On_Value_Item_Row (This, 'P72_T1', 'I_VAL1')". " But as there is more than one item in the same line I am not able to use it. Please help me solve this problem.
  
  Kind regards
  TJ
  
  Published by: tj2010 on 06-Sep-2010 03:43

  Hello

  It should work with IE8 and FF 3.6
  I do not guarantee that it works.

  function Hide_Item_and_Label_By_Value(t,p,v){
   var j=document.wwv_flow.getElementsByTagName('label').length;
   for(var i=0;i;if($x(p).id==l.getAttribute('htmlFor')||$x(p).id==l.getAttribute('for')){break;}}if($v(t)==v){$x_Hide(p);$x_Hide(l);return true;}else{$x_Show(p);$x_Show(l);return false;}}
  
  

  Probably I did invent wheel again, but learn something =) 
  
  Regards,
  Jari                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
  

• Invoke the activity do not dehydrate when using retry policy fault

  When the political use of fault with retry behavior, invoke activities are not being dehydrated properly (even if we use idempotent = false on the functioning of partnerlink).

  This poses a problem if the process is in "canceled at the last point of dehydration" - given that dehydration doesn't is not made.

  If the Invoke is successful on the first invoke (do not have to use the strategy of fault and retry behavior), he's dehydrated properly, and if the process at a later stage makes a point of dehydration cancellation exist properly.

  So it seems to be linked to the fault policy and other code running, or perhaps some properties have not been set properly (__Non-db-persist?).

  No idea how to solve this problem?

  We use SOA Suite 11.1.1.7

  According to Oracle support, political fault retry and with idempotent = false are not compatible.

• How to choose the elements that are copied when using a custom template?

  Hello

  As the title, how to choose whether or not an element is copied into a new project when the project is created from a custom template?

  I recently created a custom template by following these instructions, as had recommended after my last question on the forums:

  Click

  The template was created so that I can create several versions of a broad program of LabVIEW with unique names (using the prefix in the project options). It works fine except that some things are not copied into the new project, even if they are part of the model. The most important point of "disappeared" is for runtime menu (which is a RTM file). Does anyone know why this might be missing? And how to make sure, it is included in the future?

  Thanks for any help.

  OK, here is the custom script VI (saved in LabVIEW 2012) and XML update that should fix your test project. You can take a look at how I implemented XML and script VI, then make the changes applicable to your current project.

  1. use the attached file to MenuTest.xml for your meta data. Note the new sections CustomVIMode and CustomVIPath .

  2 create a folder next to your .lvproj of the source script and place the PostCopyScripting.vi in there.

  Once you have done so, your MenuTestProject should be copied on properly... the GTR will be present in the new Bachelor of LAW, it will have a correct prefix (if specified), and it will be the correct link to the VI.

  I would like to know if you have any other questions or problems.

• The default value for the elements of the page get ready when the session is disabled

  Hello
  
  I am facing this problem, do not know how to solve this problem. Basically, the default value 'elements' on the page don't prepare you when the session is disabled and I visit the page for the first time. So when I check the session for the first time, all page elements are null. But when I revisit the page, page elements sometimes gets.
  
  Don't know what I'm missing here... Someone has encountered this problem before?
  
  Thanks in advance! Kindly let me know if you need more clarification.

  Is there a way that the page element can be defined at the time the page is loaded for the first time?

  Yes. Create a "Page Rendering" PL/SQL process. That it is very early in the page rendering (i.e. "on charge ‑‑ after Header"). Set the value of the element of page here:

  BEGIN
    :P10_MY_ITEM := 15;
  END;
  

• How to assign a value of the element from page to main page in the column element when Cre

  I have a form build on table T1. The T1 has a primary key defined (T1PK) and four other columns (C1 - C4). I have a form in this table. This form accepts the values of C1 to C4 and displayis an extra point, is not based on columns of T1 - P1_DUMMY. The form for T1PK element has the value "hidden and protected.
  When creating the form, I wanted that the value of the primary key (T1PK) will be obtained through existing trigger. I want to use the value stored in the page called "P1_DUMMY" for P1_T1PK.
  
  No matter what I do, I always get this error when I hit the button 'CREATE' on the page of the form:
  
  ORA-01400: cannot insert NULL into ('DEV'. "" T1 ". ("' T1PK")
  
  The Create button is a condition not to show if the the P1_T1PK page element is NULL. I created page rendering process, the process of transformation of page like this bock of PL/SQL:
  
  : P1_T1PK: =: P1_DUMMY
  
  But I still get ORA-01400. The form has the P1_DUMMY as display only, not not to store the State, so I can see that the P1_DUMMY element has the value I want (2).
  
  How to assign the value stored in P1_DUMMY in P1_T1PK when I click on the button CREATE on this form?
  
  Thank you for your time.
  
  Daniel

  Hello
  The belief question is the way in which the calculation is being defined. You are not using the &. rating (dot ampersand) in PL/SQL and SQL.

  Try this.

  1 define the calculation on P1_T1PK of Type calculation of value of the element
  2. on the next page to load textarea, enter P1_DUMMY. No. colon or &
  3. give appropriate conditions

  Kind regards

• Why my element in the Comp panel not scroll when I move the current-time indicator?

  Why my element in the Comp panel not scroll when I move the current-time indicator?

  

• Script where the zero is not displayed when no value is selected, indicates when a value of zero is selected

  How can I write a calculation script where the zero is not displayed when no value is selected, but when a value field null is selected as part of the zero calculation will show?

  Option 1 has a score of 0 value

  Option 2 has a value of 5 score

  When someone chooses option 1, I want the value 0 to appear at the cell of notation.

  Here is the script that I have so far:

  If (event.value == 0 | event.value == ") event.value =";

  OK, the custom calculation script could be:

  Get the value of the checkbox field

  var v = getField("checkbox1").value;

  Set this field value

  V = Event.Value = "Off"? "" : v;

  Replace "checkbox1" with the actual name of the checkbox.

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• Apex. Submit in javascript do not set a value for the element

  Hi all
  I work with Application Express 4.1.1.00.23.
  
  I am trying to use this

  apex.submit({request:parRequest,set:{'P30_SELECTED_ROW_ID':parID},showWait:true});

  in order to assign a different value to P30_SELECTED_ROW_ID, and depending on demand, run the processes corresponding, but even if the beginning of the process correctly the value of the element sucks.
  
  I also try to call the apex.submit using a javascript function to check the parameters passed and the value of Thierry is correct and NON NULL .
  
  Thanks in advance for any help or suggestion.
  Alex

  Hello

  article P1_SELECTED_ROW_ID is about to "view only".
  If you replace this 'hidden' and unprotected, it should work.

  But because of the check constraint DEMO_CUST_CREDIT_LIMIT_MAX credit_limit<= 5000="" there="" will="" be="" an="" error="">

  Good luck, Erik-jan

• How to transfer the text value of the element with the character of new line between pages?

  Hello

  I use the Application Express 4.2.2.00.11 on the 11g XE database. In my application, I use the transfer of certain values deposited between pages on a lot of places in my application. But now I have a specific problem with a textarea element.

  I have the page with the textarea element and I transfer element value to another page using the link button. I use "Set these elements" "with these values" mechanism.

  Everything works fine until I try to add the new line character in the area of the text box to be transferred to another page. I get this error message when I try

  Contact your administrator for the application. The checksum calculated on the basis of the application, clear the cache, names of arguments and argument values (711P711_TEXTabc CRC [A55D4D4B325E23CB83EF28FB7671E8F0]) does not match the checksum passed to the procedure of show (23CC724ADDA630B6F3BDFD2FEE1498E0). Note: users receive a different error message.

  Transfer of value to another implementation of page when I 'abc cde' in the text box.

  Transfer of value to another page do not work when I 'abc [line break] cde' in the text box.

  Value of transfer with the new line character point works when I change "Arguments must have checksum" "Unrestricted" on the landing page. But I want to use the shared services provider and do not want to disable checksum calculation.

  It seems that there is a bug in the function of calculation of sum of internal control...

  You have some tips?

  Cardel wrote:

  I use the Application Express 4.2.2.00.11 on the 11g XE database. In my application, I use the transfer of certain values deposited between pages on a lot of places in my application. But now I have a specific problem with a textarea element.

  I have the page with the textarea element and I transfer element value to another page using the link button. I use "Set these elements" "with these values" mechanism.

  Everything works fine until I try to add the new line character in the area of the text box to be transferred to another page. I get this error message when I try

  Contact your administrator for the application. The checksum calculated on the basis of the application, clear the cache, names of arguments and argument values (711P711_TEXTabc CRC [A55D4D4B325E23CB83EF28FB7671E8F0]) does not match the checksum passed to the procedure of show (23CC724ADDA630B6F3BDFD2FEE1498E0). Note: users receive a different error message.

  Transfer of value to another implementation of page when I 'abc cde' in the text box.

  Transfer of value to another page do not work when I 'abc [line break] cde' in the text box.

  Value of transfer with the new line character point works when I change "Arguments must have checksum" "Unrestricted" on the landing page. But I want to use the shared services provider and do not want to disable checksum calculation.

  It seems that there is a bug in the function of calculation of sum of internal control...

  You have some tips?

  This is one of the many reasons why it is inappropriate pass strings of characters between the pages through the URL. Instead of using a redirect button, change the button to send the page, then use the conditional calculations to set the values on the landing page and finally access the page using a conditional on submit: before Validation: (after calculation and before Validation and treatment) branch. When you press button terms of use on the calculations and the direction.

• default value for the element hidden and fill the query

  Hello.
  
  1.-) I got a page that contains 2 parts, lets say: (HTML text) master and a detail (editable tabular report)
  
  in my tabular form, I had a hidden element that must take the value of the main form. How can I do this?
  
  
  
  (- 2) I call you a form to another form, sending a couple of fields as a settings link. the second form is called as expected, but I need that records on the second form that correspond to the settings appear. How do I get there?
  
  
  
  Thank you
  
  (new to apex)

  Hello

  The value of the source of the item hidden in the Tablur form to return the value of the master shape. Fundamentally change the Data Source to the article Page and specify the name of the element under the element of value. One thing you should keep in mind that when the page is submitted that reflects the value of the target element.

  If you want the value to be changed immediately when the value is changed in the main form, and then you create a dynamic Action with javascript code to change the value.

  Your second query is not clear, can you please provide any additional information.

  Thank you
  Sirot