Issues in the control of resources

Similar Questions

• issue of the call control feature

  I am running an application with an unidentified Developer (LuxRender), triggered by another application by a developer identified (mixer)

  Both applications are produced executable 'stand alone '.

  If I perform an action in a mixer called LuxRender there is no problem with the launcher application and do this is special, and in certain situations, I need this app run stand-alone.

  If I call LuxRender from the finder, it gives me an error that it is an unidentified developer. From the doorman ( > System Preferences > Security & private/General life) by clicking Open anyway I can't open the application, unless I drop my safety for the 'anywhere' level.

  The fact that I can get around this with another application, what is not somehow try to outsmart security is relative to me. The question I have is: is this behavior of design?

  

  

  GateKeeper settings apply only when you start an application from the Finder * first *.

  If an application does not start because it is not signed, then instead of double-click you can press the control key and choose open - then a similar message but instead of just an OK button, you will have two buttons, one that says "Open". Click on it to launch the application. After that you can start normally.

• My pc says: the remote control or resources do not accept the connection

  I have Windows 7 can download 360 total security and I did the scan and clean almost everything in the program and then you open the browser, but it does not connect to Internet and it gave me the same message, the remote or resources want except except the connection so I tried all the solutions, but it seemed that my problem is a little different from all the solutions on the Internet and someone says had an idea about my problem please come out and help me.

  Have you tried to remove total security 360?

• Issues related to the control point.

  Hello
  
  I have a doubt, checkpoint,
  
  Writing database writes data to stop data to the control files.
  
  In my view, the database writer writes only stamps Sales (which are commited buffers) in the data files. Can someone delete this
  
  
  Thnks

  user10745179 wrote:
  Hello

  I have a doubt, checkpoint,

  Writing database writes data to stop data to the control files.

  In my view, the database writer writes only stamps Sales (which are commited buffers) in the data files. Can someone delete this

  Thnks

  Yes, database writes the uncommitted to the data files. In case you long uncommitted transaction, this would mean that you have a lot of data not validated in the database buffer cache. There might come a time where all the data of the dbc is not validated, if more data must be written in DCB, no own stamp will be available to write and the cause of crashing instance. In such a situation, the dirty unvalidated data are also flushed to the data files but is not accessible until the transaction is complete, once the changes take place and other users will get the changed data.
  Kind regards
  Blabla

• Windows live Essentials download fail / cannot be uninstalled in the control panel too

  reset the computer from 32 bit to 64 bit, now I can't install windows live essentials said that something prevents the installation. tried to install piece by piece like windows movie maker, but can not install msn messenger. its installation and make back.  checked the control panel there are windows live essential tries to uninstall but could not be uninstalled. There are also errors on my windows update not installing updates on update security for windows 7 x 64 systems and put for the pickup of 2007. Office systems. tried to install windows live for days now. Thanks for your help, everyone.

  My apologies: I misread your message original & thought you had problems to install Microsoft Security Essentials, not Windows Live Essentials.

  You will find support for Windows Live Essentials installed in this Windows Live Help forum:

  http://windowslivehelp.com/forums.aspx?ForumID=a372972e-8e7a-4d85-ADC3-a1b43e8c02ec

  ====================

  IN RE your problems to get the critical security updates (only) installed:

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  People experience problems of installation of the security updates Microsoft may also visit the following pages for assistance:
  https://consumersecuritysupport.Microsoft.com/
  http://support.Microsoft.com/ph/6527#tab3

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can't my happen just an error in the control panel

  Whenever I try to use my control panel I just get an error message saying that windows Explorer doesn't work, then it gose top of page Office

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Step 1: Search for the issue in the clean boot state.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:

  Using the event viewer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• Issuer of the certificate that is unknown on Google, Facebook, Youtube and Twitter.

  Very well. I have tried to sync my time with time.is , uninstall Kaspersky, clear my Cookies and Cache, disabling IPV6 in topic: config, resettlement, refreshing, uninstall the extensions and contradictory and not updated addons, deleting the file db, defining "Not of Proxy" settings, disable Windows Firewall...

  ... And it is always the case:

  "The certificate is not approved because the certificate of the issuer is unknown. The server may not send the appropriate intermediate certificates. An additional root certificate should be imported. »

  "(Error code: sec_error_unknown_issuer).

  (Additional note: Google only works if http://www.google.com/?gws_rd=ssl is specifically typed without the S.)

  "Issued by parental control, OR Microsoft < is not part of the certificate >.

  I think I found my problem.

• Cannot run youtube videos in Firefox. Cannot use the play, pause, volume, or one of the control buttons.

  None of the control buttons work, it's as if the video window pretty darn part of the scope.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• get the name of resource VISA

  I connect serial port COM3 to a digital multimeter, I can sure that COM3 is displayed in Device Manager. but I don't know if COM3 is in the name of resource VISA list. If COM3 is not in the list, I want to update resource VISA name.

  So my question is how to program can get the entire list of the name of resource VISA, so that the program can compare resource VISA with COM3 automatically name? How the program can update the name of resource VISA, if COM3 is not in the list?

  LabVIEW 2011 windows 7

  Thank you

  Control of resources VISA automatically displays the available visa resources. If it isn't then looks like there was an error in the installation of NI-VISA.

  An alternative is to use your own control, as suggested here: http://forums.ni.com/t5/LabVIEW/VISA-resource-name-control-want-to-refresh-list-of-COM-ports/td-p/13...

• NI LabVIEW driver for the SRS DS345 function generator generates error "(Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system."

  Hello

  We have a generator function SRS DS345.

  I just downloaded the driver NOR for the instrument on http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748....

  After installation, the DS345 appears in MAX, and I can well communicate with him.

  However, if I run the srds345 to Started.vi, I get an error "location information insufficient (Hex 0xBFFF0011) or the device or resource is not present in the system" from initialize it with Options.vi srds345 sub - vi.

  The only change I did Exchange address GPIB 14 to 19, which is our function generator GPIB address. In addition, the

  Functions of SRS DS345 generator of function palette is empty, even after you restart LabVIEW (see attachment). I'm using LabVIEW 8.5.1.

  Your help in resolving this issue is appreciated. Thank you.

  Best regards

  Peter

  Have you installed the driver from LabVIEW or copied directly from inst.lib?

  The first is easier, and you don't have to restart LV more...

  Error in a not filled gpib address points. I have not checked if this driver has a resource name visa or a string of gpib address old but in the first case, try the little triangle on the right at the slect address instead of by hand.

• How to increase the control limits for the Audio Volume?

  I have upgraded my PC base unit and no longer have the output of the Speaker Volume I had before. The audio output is more silent than before with the same speakers I used. I have moved all the sliders on the control panel of the Volume on their maximum position, but still can't get enough of output to the speakers. The important thing is for my use are 'Volume Control' and 'Wave', and these are set to the maximum. Now I have a motherboard with Intel D845GERG2 Intel i845GE chipset. The operating system is Windows XP Professional SP3, as previously. The sound card is SoundMAX Integrated Digital Audio with Legacy audio drivers. I checked using Device Manager drivers and hardware to work properly. The problem is software because I can achieve the required high speaker volume if I use VLC Media Player and set the volume to 200%. With Windows Media Player, set the volume to 100% is sufficient. I'm looking to increase range parameter on the control panel of Volume as a general solution. Can you advise if this is possible? I looked at a few ideas, these courses: edit files (.inf) SoundMAX driver. Modify the registry keys concerned. Use different audio drivers (none seem to be available for my hardware). Install the software to boost the audio output (VLC Media Player should be achieve this somehow). Install alternative (rollback) Microsoft drivers. Any advice would be much appreciated.

  Just an update of my efforts on this issue.

  I revisited the audio registry settings SoundMAX for HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ \0005\Settings {4D36E96C-E325-11CE-BFC1-08002BE10318}. These are installed when you install the driver for SoundMAX Integrated Digital Audio. Changing these settings has already failed to get an increase of output audio volume. I have now found some settings of the value of these registry keys that have given me a satisfactory increase in the volume of the audio. In short, the cure for my situation was:

  The file source (wdm3516b_Cadenza.exe) driver available from the Download Center Intel is a self-extracting ZIP file. Unzip this file to a location convenient temporary store (C:\Temp)

  Use a text editor (Notepad) to edit the INF of the driver - in my case, it's "smwdmCH4.inf. Changes to this file cause the digital signature of the file to be invalid, but choose "Continue Anyway" to solve this problem during the installation of the driver. To increase the sound volume levels, the audio volume registry key value parameters that have been predefined 08 (hex) have been changed to 01 (hex). I suppose that this change dB levels produced by the SoundMAX Integrated Digital Audio.

  To install the new settings:

  Uninstall the SoundMAX Integrated Digital Audio hardware by using Device Manager.

  Restart the PC - this should give a "new hardware found" restart of the PC.

  Use Device Manager to reinstall the driver for SoundMAX Integrated Digital Audio. Do not use the automatic selections for this - run the installation process where you stored the INF driver edited file.

  Once installation is complete, a check on the properties of the device must indicate that the device is functioning properly.

  Use regedit to check that changes in the edited file driver INF appeared in the area of the Windows registry - in my case, it is HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005\Settings.

  I will emphasize that it is NOT a recommended fix - it turns out that it worked for me. The usual caveats apply - save your original settings, or better yet, use software disk image to make a copy of your drive hard so that you go back to square one if she's going "pear-shaped" with adaptations that have been made.

• I can't change anything in the control panel. My computer says I may have not sufficient permissions to access the item.

  We have tried everything we can think of changing the time in our computer.  Whenever we click on the small box in the lower right corner, he says - "Windows cannot access the specified device, path or file.  May not permissions to access you the item.  In addition, we are unable to add or remove programs or making changes through the control panel.  Help

  All the problems you describe are problems that could occur if the user that you are connected without administrator privileges.  The quick check of administrator privileges must right click on the button 'start '.  If "Open All Users" is one of the choices that appear, then you have administrator privilege.  Otherwise, you must connect to your machine like the built-in 'administrator' or a user in the group "Administrators".

  Assuming that you have administrator privileges, things get more complicated.  User rights can be granted or denied to any user - even administrators - by group policy.  If you are an administrator and you have XP Pro, then you might be able to check or change the user rights by using the Group Policy Editor (from-> Run-> "gpedit.msc").  Search in the:

  Computer configuration-> Windows settings-> security settings-> local policies-> user rights

  path.  One of these user rights is "Change the System Time".  If your XP Pro machine was never part of a domain, I would consider also running a program anti-malware on your system.

  If you have XP Home Edition, you don't have the Group Policy Editor.  You will need to check / adjust / modify your user rights by using the command line program "NTRights" provided with the Resource Kit.  Problems like that with XP Home would raise my suspicions that you have a malware infestation.

  'How to set user rights to logon using the NTRights utility'

  <>http://support.Microsoft.com/kb/315276 >

  HTH,
  JW

• An error occurred while Windows was working with the Control Panel file C:\WINDOWS\system32\ALSNDMGR. CPL.

  Title:C:\Windows\System32\ALSNDMGR. Original CPL.

  Running Windows XP PRO this message "an error occurred while Windows was working with the Control Panel file.

  C:\WINDOWS\system32\ALSNDMGR.cpl.

  Can I re-enstall or the download file?

  Hello

   

   

  1. Once you get the error message?

  2. What is the card its installed on the computer? E.g. Realtek

  3. do you have a cleaning registry registry booster software installed on the computer or third party?

  4. are you able to play sounds on the computer?

  5. have you done any software or hardware changes on your computer before this problem?

   

  Alsndmgr.cpl made reference to the Manager his control panel Realtek Semiconductor AC97 file.

   

  If you have the card Realtek sound on your computer, try the following steps

   

  Method 1:

   

   

  If you have your CD of the sound card, I suggest to uninstall the card drivers sound sound card support applications and reinstall them.

  Reference:

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

   

  See also:

  http://support.Microsoft.com/kb/307895

  Method 2:

   

  You can still download the drivers from the Realtek or the sound card manufacturer's Web site.

  http://www.Realtek.com.tw/

   

   

  Hope the information is useful.

  Thank you for the help, I downloaded the 97 Realteck PGM. He cured the issue.

• How do you remove a program if it does not give you the option in the control panel?

  How can delete you a program in Control Panel / Add or remove / if I select Microsoft Silverlight it gives me the option to delete. until this issue is resolved I can't watch the episodes of the shows I saved in Favorites. is very frustrating, can't update to Silverlight and impossible to remove the old version. When selected all it says is used. rarely. no option to remove.

  original title: How can you delete a program in the control panel if it won't give you this option, when highlighted, such as Microsoft Silverlight?

  Hello

  Check out the link and follow the steps to install Silverlight on your computer.
  Uninstall previous versions of Silverlight on Windows
  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx
  You can also check out the link for more help below.
  Deletion of Silverlight
  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-ARP-win.aspx

• Impossible to access A add or remove in the control panel error ""C;\WINOWS\system32\rundll.exe"

  original title: cannot access Add or remove in the control panel

  Access cannot add or remove in the control panel.  When I try this i get could not find "C;\WINOWS\system32\rundll.exe".

  Hello

  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.

  Method 1: Follow the steps mentioned in the article below

  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340

  If the problem persists,

  Method 2:

  The issue could also come from Virus/Malware, download and run Microsoft Safety Scanner and check if this is useful.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx