issue of the call control feature

Similar Questions

• OfficeJet J3680 all-in-one: the caller ID feature

  Hello

  My officejet does not seem to have the caller ID function as it should.

  Do I have to update - upgrade somehow?

  Thank you

  Hello

  It is difficult to say, but it is surely worth a try.

  Ensure that the correct area is selected under Setup > Prefrences > Set Language & country.

  If it is still not listed, the options may vary according to different countries and such is not supported by the printer in your area, usually the option should be available.

  Kind regards

  Shlomi

• How to interrupt the parental control feature?

  How to take the function of parental control of my computer?

  Hello

  I suggest you to follow the steps from the link below and check if it helps:

  http://explore.live.com/Windows-Live-Family-Safety-remove-uninstall-FAQ

  http://support.Microsoft.com/kb/938275

  Hope this information is useful.

• How can I get rid of the black bar that appears in the middle of the screen every time I have set the basic like the volume control features, or brightness levels?

  Hi, can someone help me with a really annoying (and I'm sure a simple to fix) problem?  I don't know if it's related to Windows 7 or if it's just my laptop plays up.  I recently upgraded to Windows 7 from Visa and whenever I have increase/decrease noise, brightness, etc (no matter if I do this using the key on the keyboard or via the control panel), a black bar appears in the middle of the display, indicating the levels that I'm reaching with the adjustments.  It's useful... except it does not disappear after that I'm done.  The bar stays there for all the time that I am connected and text blocks, images on the screen that I can't minimize or even move it out of the road.

  Hi, can someone help me with a really annoying (and I'm sure a simple to fix) problem?  I don't know if it's related to Windows 7 or if it's just my laptop plays up.  I recently upgraded to Windows 7 from Visa and whenever I have increase/decrease noise, brightness, etc (no matter if I do this using the key on the keyboard or via the control panel), a black bar appears in the middle of the display, indicating the levels that I'm reaching with the adjustments.  It's useful... except it does not disappear after that I'm done.  The bar stays there for all the time that I am connected and text blocks, images on the screen that I can't minimize or even move it out of the road.

  Hi Mkum

  The bar you describe look like this image?

  

  If so, this is part of the HP software that is installed on the computer.

  Here is a link to the HP support forum where this utility is supported.

  Desktop PC noise and acoustic - HP Support Forum

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Table in the call back feature

  I set up a table at the top of the file in FLASH
  questions of the var: Array = new Array();
  I read in a list of short XML files and push them on the table in the callback function OF the charger inside a loop event listener for each
  questions.push (new XML (evt.target.data))
  Inside the callback function, I can trace the content of the table.
  trace (questions [length-1]);
  Outside the callback function, the array elements are undefined.
  
  What is the problem with this approach to the addition of small XML files for each element of the array?
  

  use the attach code option to view the code in this forum.

  and you will have a better chance of success with the code below:

• Ring of the remote control for a updated firmware A77 camera REQUIRED emphasis comments functionality and design?

  Hello
  It is a good complaint and at the same time a good stand on a feature I'd neeeeeed really put in an update of firmware for the camera of the A77 as soon as POSSIBLE (as soon as Possible) like others, I have already asked for what he moooooonths there!
  I have spent the money of the month and time in a machine to control the update in order to focus stacking without touching the camera... It does not give the expected results, but maybe after all, I will succeed.

  But of course, it would look pretty cheap technology around an expensive Sony which does not any Thetering for this device 3 times the price other cameras with this feature, "Thetering", a term which means remote control the camera from a computer or IPod, mobile phone, etc.

  FUNCTIONALITY NECESSARY:

  Everything is necessary at least to do something, would be the ability to reallocate the shutter half pressed the button to advance a specific step. When the focus is narrow, few measures are necessary, but it goes further, steps may be greater. The camera would limit its course to the limits of the focus ring. Once the button out (so not half or completely down) or when the update has reached the limit of development more far, it would be to take a last picture and bring focus back to its position closest to you, ready for the next batch of photo.

  Pictures would be taken when completely down. If the focus is not the position of the closet before splashed the process, we could do it manually or select an option from the menu.

  Another possibility would be to reassing these 2 keys of the remote control features: a to make one step back, one to make a step forward. The advantage of the 2nd button that allows a remote control, would be the possibility of backwards if we went off for a step.

  Overall, it would take very little programming to do this. (mainly add a menu option and the operation of each time button x is pressed, focus moves a step forward, a step being of size proportional to the distance according to a simple formula. Same thing for a button Y in the opposite direction.

  (1) what is the best way to communicate this request to the right people?

  If someone expect this feature too, please comment!

  (2) also, where we communicate comments on design issues?

  Thank you

  Hello Mark,

  Welcome to the community forums of Sony

  Thank you for your comments and feedback for the SLT - A77.  The answer to both questions is, Right Here.

  We are able to pass all your firmware requests and comments and suggestions regarding the product directly to the Digital Imaging Group.

  We can't promise or provide an ETA, however, we listen and as owners of the NEX-7 can attest, we can impliment when we can.

• For the remote controls of the Keynote?

  I want to use a remote control for a presentation in Keynote, I'll give.  It will be my first with a remote control, but which is later - should I buy a (If Yes, who?) or what is the last and the best app for me to use my iPhone as a remote control (which I prefer, a gadget to lose less!)?

  Please use a simple language with me, a digital native.

  I use my aging MacBook Pro with OSX 10.7.5, my speech is 5.1.1 and my iPhone is a 6s.

  Thank you!

  Using a method rather than another is a personal preference, my preference as a coach and lecturer working in several different locations is to use Keynote for iOS, it has built in the remote control feature:

  Tap to go to the next slide

  previous slide scanning

  Pen tool marker on the screen

  the highlighter to screen

  the iPad displays the screen of the presenter, showing the next slide and notes of the speaker of the presentation on the Mac

  

  There must be a wifi network present, you can connect; many businesses teaching institutions lock unregistered users by default

  The site Web of Keynote iOS is here: Keynote for iOS

• How can I accept terms of use Live when you try to use the Windows 7 parental control features?

  * I have already connected to fss.live.com and https://familysafety.microsoft.com. This solution does not remedy the issue.* *.

  When you try to use the Windows 7 parental control features, it first asks you to connect to Live.  When I do, I get the 8004B3E9 error Code and it asks me to "connect to account.live.com and accept the terms of use.  However, in doing so, there are no terms of use for me to accept.  I also go to fss.live.come and familysaftely.microsoft.com and no option for the conditions of use is available to accept.  In addition, I tried different browsers.

  I can connect on Live.com and view my account easily, but without conditions of use prompt appears for me to accept, so my attempts to use the parental controls are stuck in this cycle, where it won't let me past without accepting conditions that do not seem to exist.

  How can I make sure I am set up as the account 'Parent '.

  Help, please

  3 hours later I'm finally able to access Family Safety. Thank you!

  The correct link to solve the "Terms of use" requirement is:http://g.live.com/0fsenus4/nexusmigrate

• When the video parameters SX, MX and CSeries will be a keyboard of DTMF tones on call control page?

  Currently, the page of call control on the web interface of the Cisco video endpoints doesn't have a way to enter DTMF tones remotely.   It doesn't seem to be a keyboard of DTMF tones available to enter these tones remotely.   Does anyone know if Cisco will be adding this soon?

  You can enter DTMF tones using the web interface under Setup > API.

  xCommand DTMFSend CallId: DTMFString:

  • CallId: The CallID returned by operating the xCommand command Dial. During the call, you can run the xStatus calling command to see the CallId.
  • DTMFString: Enter the DTMF string.

  Example: xCommand DTMFSend CallId:2 DTMFString:1234

  Best place to find updates to come or possible would be to contact your Cisco account manager, if nothing is being developed or looked at the current time, they can create a demand for improvement for you.  However, the C series and the earlier boundaries of MX series points are already end of sale, and TC software they are running is in maintenance mode, in order to get the new features added to these devices special is unlikey.  Although there is a chance to get it added to the current range of endpoints SX and MX Series, just need to contact your Cisco AM and see what they can do to make your request.

• How can I change the features of the DropDownList control?

  Hello world. I want to change the DropDownList labelButton - the button which, when is knocked open the content of the list. I want to replace the empty space with a search form. User will be asked comes from the content of the DropDownList control when he types in the letters or words that match those of content. It is like a regular search but with DropDownList features and its content using results. I have no idea where to start-I already looked through DropDownListSkin and DropDownListSkinBase but can't find anything that could help.

  Any ideas on that?

  Any help is really appreciated!

  DropDownList not ' let type you in stuff not in the list.  Ensure that you

  you don't want a ComboBox?

  You should be able to change the skin to remove the button and call open()

  When the.  You'll probably need to override management and the keyboard

  Well.

• The C40s allow a snapshot at a distance in the call Web control?

  Hi guys,.

  It's something that I just noticed and I wonder if this is a limitation of the C40s, or if I am missing a setting somewhere.

  On a C90, when you browse control calls on the Web interface when a call is active, not only to see you (if enabled) Instant local, on the list of participants, you can also see a snapshot of the remote participant. However, we have several C40s where this does not happen (which is actually very useful for diagnosis at a distance in the call).

  Is it just the case or am I missing something?

  Chris

  Hi Chris

  End snapshots are captured, even if the web snapshots are not allowed on the video end
  System. Web snapshots are forbidden only for encrypted calls.

  Snapshots of the incoming remote video Web are available for unencrypted call.

  BR Oleksandr

• How to control the call to a data control using the portlet parameter

  Hello
  
  I use a web service data control in my portlet application. I would like to know if there is a way where in the data control will not be called when the portlet is responsible, unless the portlet parameter is specified.
  
  Thanks in advance!
  Rian

  You are right.

  It is an example of a classic which I use as a data control:

  public class UserDataControl {
  
    private UserService_Service user_service;
    private UserService us;
  
      public UserDataControl() {
          super();
          user_service = new UserService_Service();
          us = user_service.getUserServicePort();
      }
  
      public List getUserList(String company) {
        List list = us.retrieveUserList(company);
          System.out.println(list.size());
           return list;
      }
  }
  

  The proxy in my case has been generated in UserService_Service.
  This class is used as a datacontrol so my datacontrol will be a setting for the company, as you can see in the getUserList.
  You can check if the parameter is null, then returnn an empty list or so.

• Call control panel upward on the iPhone 6 s

  I can last days of work is more drag up to quick access the Panel control, everything just stopped.  Any ideas on how to solve this problem?  I use the flashlight and enable and disable the wifi there all the time and miss it.

  BUrlgirl

  This thread offers a very good solution:

  Notifications and control panel do not work on the home screen or screen app

• Issues related to the parental control EA6900

  I have my setup of parental control to block access from 22:00 to 09:00 however, it does not automatically access when the time changes to time 'unlocked '. Curiously, it still shows the message 'parental control block. I have to disable the parental control to allow access to devices after 9:00 and then it must reactivate at 22:00 to block access again.

  I've also updated the latest firmware (1.1.42.161129). It does not seem to be 2 versions (V1.0 or V1.1), however, these two seem to be the same file. I used the correct version for my router (V1.0).

  I want to stay with what you have for now and look to see if it works on some devices. Check that the clock on the router is configured correctly. See also if certain sites are blocked and others not. I think there's a bug where some sites using https:// is not to be blocked but http:// did. It worked correctly before the upgrade? Remember you of what was the old version? The cancellation is made by the interface of the router and there is a button to restore but still, if restore you an unwanted version which isn't good either. Better do small things first.

• 7 adapter w/lightning iPhone headphones. The caller does not hear me

  When I make calls or receive, the person at the other end of the line can't hear me but I can hear them.

  In this case more than 50% of the time until now, in fact I would say more like 75% so far. Sometimes its fixed by pulling me on the adapter of the lightning and put it back in the phone.

  Today, I put through a few tests in-depth using three different sets of headphones and had the same problem with all of them.

  Anyone else having this problem?

  I'm having the same problem also. Pulling on the adapter of the lightning and reintegrate them into the port seems to solve it, but then happens again next time you receive a call.

  I used two different sets of headphones with the same results.

  The remote control also do not work and can not adjust the volume of the call.

  Assuming that he is part of the issues that have been reported and will be fixed in the next update?