Issues with Radeon HD 7690 M XT and WIndows 8.1

Similar Questions

• VM with l.o. xp 32-bit and Windows 2003 are very slow

  Hi all
  expose the problem

  
  I installed esxi5.1 Server poweredge r715 ADM Opteron 6238 processor. the bios of the server is upgraded to the latest version 2.9.0

  VM with l.o. xp 32-bit and Windows 2003 are very slow and found to have 100% of the CPU.

  This problem also happens with the new machine virtual and not only moved to another computer virtual infrastructure.

  Support DELL has verified the server BIOS settings and it's ok

  Thank you

  Mr. Nelli

  This BIOS version introduces a few new States C. can you check that your power supply is set to 'Maximum Performance' and that you have disabled C1E.

• HP dv7-6c47cl: Radeon HD 7690 M XT and HP dv7-6c47cl

  My computer laptop dv7 works, for the most part, completelly very well. Granted, I have sent in for repair several times... and honestly I have no doubt that I'll have to again.

  The main concern with this is that dreaded dedicated graphics card. The Radeon HD 7690 M XT graphics card is pretty much the reason all first, I bought this computer. So I can play games on my computer. Initially, it was great and I used to play games on the highest quality without problem.

  Now, I cannot play the same games on the lowest significant quality without lag and experience very strains. The Intel graphics card does a better job turning the games! It's outrageously frustrating, because it's the main reason that the computer was purchased in the first place!

  I know that there is a problem with the driver update, and I am convinced that is the reason why I can't play the same games as I could when I bought the computer with the same performance. I factory restored my computer and stripped to essential programs only to run, so it's not the question. IT IS THAT I CANNOT GET A DRIVER.

  I know that other people have exactly the same problem as I am. But I can't find ANYWHERE that someone has found a way around the fact that HP will not provide of the graphics drivers up-to-date official. AMD publishes version 14, and HP still provides only version! Batman, Whiskey tango Foxtrot!

  Can someone give me a hand? I would like to at least play my Skyrim daggon on low quality without a dizzying shift.

  Hello

  You might consider would be to try the switchable graphics custom offers avaiable on the following link - I never used these on a very limited number of machines, but they seem to work pretty well for Intel 3000 / 7690M graphics multiplex XT.  I would always advise to create a system image (or restore point at least a windows system) before - you can also try different revisions, that personally, I don't find always the absolute latest version gave the best performance.

  http://leshcatlabs.NET/

  Note:  I strongly suggest you read the guide on how to install these drivers correctly.  It is also important to note that the driver signature enforcement is disabled so that these drivers to load, - more details can be found here.

  Kind regards

  DP - K

• HP Pavilion 15 t issues with Internet connectivity can be used under Windows 8

  So I just got my new HP Pavilion 15 t-e000 CTO Notebook PC last week, it runs Windows 8 & amp; It is a 64-bit.
  
  The only problem I've had is to stay connected to my wireless Internet. The connection stops at random intervals saying 'Limited' instead of 'connected '. I have to constantly disconnect and connect to my WiFi. It's particularly frustrating when I am trying to download something that lasts longer than a few minutes because the Internet connection cuts, and I have to start the process.
  
  I tried pretty much every "difficulty" people have posted that worked for some people. No luck for me. Sometimes it seems that he will stay connected and then I try to connect to a web page or download something and it turns off again.
  
  -Turn off the "Allow computer to turn off this device to save power" under power management in the properties of my wireless connection section... DID NOT WORK
  
  -By using the command prompt to reset the network card... DID NOT WORK
  
  -Running the network and Internet, and convenience stores something... Didn't WORK * update: if I run the connection test network via the HP help/support on my desk Center, while the connection says Limited, I get the notice that the 'default gateway was not available"and the router has been handed over to zero and issue fixed, etc. BUT if I run the test, while the connected said wireless, the test still says there is no problem. And although the test 'fixed' the issue, it does not because the Internet always cut again.
  
  -Updates Windows has installed new updates several times... DID NOT WORK
  
  -Forget the wireless network and set up as a new... DID NOT WORK
  
  -With the help of my computer right next to my wireless router... DID NOT WORK
  
  Used wireless router is: Cisco Linksys Wireless-G 2.4 GHz router to wide band as well as our network is WPA with a security code. We also have an Internet DSL SpeedStream thing (sorry, I don't know what it's called). The Compatibility Center said that this router is compatible with Windows 8. Other computers running Windows 7 and Windows Vista, iPhones, iPads and all work fine.
  
  My laptop uses Intel Centrino Wireless - N 2230 and the light is on and it still says ' device working properly "in the properties.
  
  For any help or suggestion would be greatly appreciated because I am at my wits end.
  
  Thank you

  Therefore, it seems that my problem with the limited Internet connection has been resolved. I didn't use my computer for two days and this afternoon, when I turned it on I was still having problems. However, I went to the HP Support Assistant, and it appeared that I had a few updates to download and install, so I let him do his thing. It took awhile because the Internet kept cutting out, but once the update for the wireless Intel have finally set, my connection is REMAINING CONNECTED. Finally!

  I don't know why when I went into the properties wireless it says "device working properly ' and when I tried to update the driver it says"your driver is the latest version"or something else.

  I suggest you just go to the HP Support Assistant and updates in the section "Updates and the updates of". It was a bit random, but touch wood my looks of problem connecting wireless to be gone.

  Hope this helps

  P. S.

  Here is a screenshot of what the HP Support Assistant (this is the logo of big question mark) main screen looks like:

  

• HP Pavilion dv6 issues with Radeon HD 6770 M

  Hi, I had this problem with my PC.

  I have my Radeon HD 6770 M who always seems to miss, and sometimes (in the driver manager), it has a small yellow triangle and contains an error. At the moment it doesn't have an error, it says it works fine, but every game I try the computer is forced to use the Intel HD Graphics, because it cannot find the Radeon. I solved once the problem, when I discovered that a lot of HPs have a problem with the compatibility with the Radeon and I needed a plu tweeked update from HP.com, that would be compatible.

  That solved for a while, and my games might even have better graphics without slowing down (now, he collaborated with the Radeon instead of the single Intel HD). But today, I was about to start playing the game Deus Ex, and before you start, he asked me what graphics card I wanted to use, what brightness and Hz how I wanted to, and in the graphics options, she had that Intel and the Radeon are not the case to be found, and all the graphic now weaker need games to work fluidly (the graphics were lowered for some time but only today with this) Guest did I connect points and went it was again the Radeon).

  I thought maybe the update again on HP.com, but I can't find my computer in the list.

  All I want is to be able to use my best video card and update without worries.

  How can I solve this?

  Sorry for such a long speech, here is some important info.

  Product: HP Pavilion dv6-6b60ep (product: AB6 # A6L28EA)

  OS: Windows 7 Home Premium 64-bit

  Thank you.

  Hello GuilhermeCosta,

  You are experiencing a problem with your graphics card does not properly.

  I do not know what settings have been changed before you were asked to select the graphics you want to use. It could have been an update that caused the problem start.

  Here is a link to the graphic updates for your system.

  You can also run a system restore.

  This will bring the system back to when everything worked correctly without affecting any of your personal files.

  Here is a link on how to do a restore.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• VCAC 6.0.1 issues with setting Active directory on tenants and pointers for install

  Hello

  So I finished the installation of the VCAC 6.0.1 (published on 13-02-14) and all its components in my test harness.  I am able to connect using [email protected] no problem.  I wanted to give my ad 'Domain Admins' group to the default tenant rights.  I ran the test on connectivity to my AD domain successfully and added to the group Admins in the field of infrastructure and tenant administration Articles and updated.  After review of the tenant defaults remained all (I saw problems with AD administrators you do not add save but remove the "alias" solved this problem.)  When I logout of the VCAC and tried to log in using one of my accounts of Member of the domain admin ([email protected]) seems not to authenticate.  I tried to reboot the device identity thinking maybe it was an AD replication or sync problem but no luck.

  I tried to created a second tenant and populated with the same parameters except of course the name of the tenant by default but not having also no luck there either.  Include some screenshots showing the configurations, but it is really strange behavior and don't know if it's just because it is such a release again or I'm doing something wrong... any suggestions on the place where to even try to troubleshoot it would be appreciated.  I even went so far as to restart the 3 servers, thinking it was a synchronization delay or something but still the same issue

  Note aside a few things I learned the hard way on this facility where people run it for the first time

  - Do not install .net 4.5.1 on your server of iaas.  I had to uninstall it and download version 4.5, included in the page install a device vcac https://your-vcac-appliance server: 5480/Installer /.

  -If your tenant administrator accounts save after hitting the update try to remove the name of the alias for your domain as it seemed to solve my problem (and native AD did not work at all for me at least)

  - Found this excellent article of Kendrick Coleman, which is a step by step guide for installation complete... very thanks and well presented.  Also has links to some useful tools like the AD Explorer to help with DN names as well as a PS script to prepare your server, IAAS, which has been a lifeline for http://www.kendrickcoleman.com/index.php/Tech-Blog/how-to-install-vcloud-automation-center-vcac-60-part-1-identity-appliance.html

  Well, what I thought about it.  It turns out that delete and then re-create the identity store for the tenant to vsphere.local (the default when first created), I was finally able to include the correct information to AD, then a final reboot of the environment and I was able to authenticate to AD.  Also for those of you who did not default that there no store identity for the first tenant then please make sure that create you an and save yourself a lot of headaches and frustration :-)

• Multifunction color HP LaserJet Pro 200: color HP LaserJet MFP M276nw 200 Pro analyzes issues with the new driver (Oct 2015) and El Capitan

  When I updated to the latest HP driver from the HP Support/drivers page, my MFP stopped scan from either a wireless network or directly connected setting.  It seems that if I scan the bed itself, I can scan when the print/scanning felt connected to my Mac, but the real problem is the document feeder.

  I also updated all THE updates Apple, including the HP Easy Scan application.

  When using the document feeder, the process initiated as it should... the first page scans, but does not appear in the HP scanning software... then 10 minutes later, the second page scan (same not result... no picture)... can I get a document could not load the error or something.  When this happens... I can't try to scan anything more until I have restart the MAC and printer.

  Hi @epbarnett70,

  I got a few comments on this issue. Please download and install the HP Easy Scan application to see if it will allow you to scan from the ADF. Use the app for Easy Scan HP.

  HP Easy Scan

• NEITHER 9212 - issues with sampling frequency, number of samples and size of buffer or slowness comes together with thermocouple module

  To begin with, I am very new to labview and unfortunately on that my first task is to build something rather complicated for a project that my company works. Fortunately it is especially followed rather than control critical processes.

  Currently, I have a cDAQ with modules, DI, AO, and TC.

  cDAQ-9133

  NEITHER 9472

  NEITHER 9421

  NEITHER 9263

  NEITHER 9205

  NEITHER 9212

  I'm currently running read-write for all 5 of these modules in parallel while loops and analog and digital inputs/outputs modules that all work as expected. Each loop requires 1 sample per channel through the wizard DAQmx etc for each module and I got can interact with all the asyncronosly inputs and outputs which at the moment is the goal. I can switch power switch for each module save memory, or if the need arrives later.

  My problem is that the module TC (NI 9212) when tilt on which allows the acquisition of sample 1 loop seems to take much, much longer to collect samples. I have played with different acquisition parameters and can seem to get a continuous flow of data when you use streaming samples, or even when specifying N-samples but I come in questions where the "application cannot catch up with the hardware.

  I tried to find an optimal number of samples/sampling, rate, etc I can get an update of temperature more than every 1 to 2 seconds, but if I set the number of samples that are high enough to apparently get a constant flow, what ends up happening waveform graphs seem to lag behind the actual data, and that's where I get errors. I only want 1 sample per channel per cycle anyway. Yet once, all the other modules in the cycle with less than 100ms delay between acquisitions but the module thermocouple ends up being 1-2 seconds. It's okay because in our application temperature should not rise/drop very quickly but its boring nonetheless.

  I have the acquisition set up for the same (NI 9212) thermocouple module was like my modules of analog and digital inputs (NI 9205 and NI 9421) take 1 sample every time the task is called so I'm having a hard time understand why do the same for the TC module introduced such a delay. Max sampling rate is supposed to be 95 samples/s/ch, so I guess that the delay must come from call the task over and over again in a loop.

  Synchronization and how you have configured the 9212?

  In the case of high resolution, it can reach 1.8 samples/s. see page 7 of the plug technique here for rates for the supported modes:

  http://www.NI.com/PDF/manuals/374389a.PDF

  -AK2DM

• Performance issue with the query when join OKS and tables of the IB

  Hello

  I'm developing an integration for the automation of RMA through repair. The type of repair order is based on the details of the guarantee. This check must be made for each record.

  Request for detailed below, I wrote, but it of a long way and slows down my program. Without this validation, it works perfectly.

  The problem is the join of tables with OKS IB, he kills performance. I also try to my side,

  any suggestion or help is appreciated. Here's the query in the program:

  SELECT DISTINCT (TYPE |) '-' || service | '-' || status)

  IN v_war_details

  FROM (SELECT TO_NUMBER (linesb.line_number) line,

  DECODE

  (fnd_profile. VALUE

  ('OKS_LINE_MIRR_NAME_OR_DESC'),

  'DISPLAY_NAME', sysitems.concatenated_segments,

  "DISPLAY_DESC", sysitems.description

  ) service.

  linestyletl.NAME TYPE,

  status of ststl.meaning,

  start_date linesb.start_date,

  linesb.end_date end_date,

  oks_misc_util_web.duration_period

  (linesb.start_date,

  linesb.end_date

  ) DURATION OF,.

  TimeUnit.unit_of_measure_tl period

  Of okc_k_lines_b linesb,.

  okc_k_lines_tl linestl,

  okc_line_styles_b linestyleb,

  okc_line_styles_tl linestyletl,

  okc_k_headers_all_b hdr,

  oks_k_lines_b slines,

  okc_k_items kitems,

  mtl_system_items_b1_kfv sysitems,

  okc_statuses_b stsb,

  okc_statuses_tl ststl,

  mtl_units_of_measure_tl timeunit,

  okc_lookups_v rentype,

  Glu mtl_units_of_measure_tl

  WHERE linesb.cle_id IS NULL

  AND linesb.ID = linestl.ID

  AND linestl. LANGUAGE = USERENV ("LANG")

  AND linesb.lse_id = linestyleb.ID

  AND linesb.lse_id (1, 12, 14, 19, 46)

  AND linestyleb.ID = linestyletl.ID

  AND linestyletl. LANGUAGE = USERENV ("LANG")

  AND linesb.chr_id = hdr.ID

  AND linesb.ID = slines.cle_id

  AND linesb.ID = kitems.cle_id

  AND kitems.object1_id1 =

  SysItems.inventory_item_id

  AND kitems.object1_id2 =

  SysItems.organization_id

  AND kitems.uom_code = uom.uom_code (+)

  AND unit of measure. LANGUAGE (+) = USERENV ("LANG")

  AND linesb.sts_code = stsb.code

  AND stsb.code = ststl.code

  AND ststl. LANGUAGE = USERENV ("LANG")

  AND timeunit.uom_code =

  oks_misc_util_web.duration_unit

  (linesb.start_date,

  linesb.end_date

  )

  AND timeunit. LANGUAGE = USERENV ("LANG")

  AND linesb.line_renewal_type_code = rentype.lookup_code (+)

  AND rentype.lookup_type (+) =

  'OKC_LINE_RENEWAL_TYPE '.

  AND (IN) hdr.ID

  SELECT kh.ID

  Of okc_k_headers_all_b kh.

  okc_k_lines_b kl,

  Ki okc_k_items,

  okc_line_styles_v ks,

  csi_item_instances c,

  mtl_system_items_b I have

  WHERE kh.org_id = p_org_id

  AND c.instance_id = p_instance_id

  AND c.serial_number = p_serial_num

  AND i.inventory_item_id =

  p_inventory_item_id

  AND kh.contract_number_modifier IS NULL

  -can be filled

  AND kh.ID = kl.dnz_chr_id

  AND kh.ID = ki.dnz_chr_id

  AND kl.ID = ki.cle_id

  AND kl.lse_id = ks.ID

  AND IN ki.jtot_object1_code

  ("OKX_CUSTPROD")

  AND c.last_vld_organization_id =

  i.organization_id

  AND TO_NUMBER (ki.object1_id1) =

  c.INSTANCE_ID

  AND c.inventory_item_id =

  i.inventory_item_id))

  Service = 'GUARANTEE '.

  AND TRUNC (SYSDATE) BETWEEN start_date AND end_date;

  Not sure where it would be so I put it in the section SQL/PLSQL.

  Kind regards

  Prashant

  Found the solution

  AND TO_NUMBER (ki.object1_id1) = c.instance_id

  replaced by to_char (c.instance_id) = ki.object1_id1 AND

• compatibility issue with my HP Officejet 6600 printer and my Samsung laptop

  I have a problem for my printer HP Officejet 6600 to be compatible with my new laptop. The laptop is a Samsung with Windows 8.1 and when I try to configure the printer with it, the printer says that I have Windows Vista, Windows 7 or Windows xp with service pack 2 or better.  Should not work with a computer with an operating system update there? How can I get the printer to work with my new laptop?

  Hello

  Your printer is in the following list:

  http://support.HP.com/us-en/document/c03168175

  Please download a tool and run it on your new computer while BOTH computers and the printer is online.

  Kind regards.

• Known issues with VMWare Fusion 2.0.2 and FTP/SSL?

  Hello

  I have a virtual machine in VMWare Fusion 2.0.2 running Windows XP with SP3. I have the Windows Firewall and AVG Free running.

  I use FileZilla as my FTP client. I am able to connect to a server using the vanilla FTP protocol. No problems.

  However, when I try to use FTP/SSL to connect to a server, I get time-out errors as it gets stuck on "initializing TLS... ».

  I tried to disable the Firewall and AVG. Nothing helps.

  I tried other FTP clients (CuteFTP, for example). Same result.

  And, I am able to connect through FTP/SSL and FileZilla to my host (Mac OS 10.5.6) operating system and another computer in my house running Windows 7.

  So I narrowed down it to something in this specific virtual Windows machine installation, but I don't know what else to try.

  Any suggestions?

  Thank you.

  How is the Machine to stop virtual network set up, NAT or bridged?  If NAT have you tried to use bridged?  Note: If you change from NAT to Bridged while the Virtual Machine is running, the IP address must be released or renewed.  If you are unsure how to do this then just restart the Virtual Machine.

• Re: Issue of drafts of Satellite A200-28 and Windows Mail

  Hello

  can anyone help?
  My laptop has SP1 on it and seems OK except with Windows Mail.

  Every now and then when I put an email in the drafts folder when I return to finish writing it this stupid laptop has marked as an email sent so I can't change it.

  I have to open select "just cut" and paste it into a new email.
  Does anyone else have this problem?

  Stupid thing, it's there are 6 other e-mails in there in some are finished, some are not.
  Yet his chosen it to mark it as a read/sent email.

  Check if you have installed the latest updates for Windows Vista? Thought, there was an update for Windows Mail or something like that.
  This behavior was before you update SP1 already there?

  But I couldn't be that he must look at its parameters. Maybe there are a few options on air currents and how they are treated.
  Sorry, can't give you better help, because I only use Outlook.

• Problems with encrypted Prestige 2 TB drive and Windows 8.1

  So I have an Iomega 2 TB external hard drive of Prestige that has been and is still working very well. I recently updated my computer to Windows 8.1 and now when I connect my hard drive to my computer, the Iomega encryption software does not recognize the drive is connected, so do not let me unlock it. I tried to connect to another computer running Windows XP and the software recognized and unlocked it very well, but as the reader has a GPT partition style, I guess that's why this computer would not read the drive, once it has been unlocked. So basically my question is is there a way for me to access my disk encrypted on Windows 8.1 or if not there at - it other software I can use to unlock it?

  Oh also, the reader communicates with my computer as when I plug it into the virtual CD with the Iomega utility encryption Setup appears, it's just the actual program does not see the drive.

  Good then I discovered why my hard drive did not work properly. After contacting the support of microsoft, it turns out that the Windows update 8.1 some chipset drivers had not updated and therefore to prevent playback of my disc. in any case, just the display in the case where a person has a similar problem.

• set up a home network with the PC using xp vista and windows 7

  I need to know how confugure my desktop vista and xp desktop and cell phone with my computer laptop windows 7.  detailed with inustrictions or links please.

  Hello

  You plug the computer via the network to a router or a switch card, and configuring their file sharing.

  ---------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Issue with HP 3500 Pro Driver Ethernet for Windows XP

  I had some difficulty in finding a functional ethernet driver for my HP 3500 Pro Windows XP. Then I found this thread: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/HP-Pro-3500-MT-XP-Drivers/t...

  Paul_Tikkanen links to a site that looks promising. However, the third link on the top seems to be completely broken. I tried all six sites with different browsers with no luck. It freezes everything simply. Now, I plead for an alternative download for this driver and/or the confirmation that this is not a problem that I am experiencing. Thanks in advance.

  Hello:

  I was able to open the link and save the file from the link of US2.

  If you can not get it, please let me know and I'll upload the file, upload them to my skydrive folder and you can DL from there.