compatibility issue with my HP Officejet 6600 printer and my Samsung laptop

Similar Questions

• can a laptop running windows 8 work with a hp officejet 6210 printer all in one

  can do a [hp 15 laptop Clubhouse] laptop running windows 8, work with a HP officejet 6210 printer all-in-one?

  The Windows 8 shows it as being compatible hardware compatibility site.

  The drivers are located here.

  

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• Anyone know of any compatibility issues with Windows 8 and RV series routers?

  I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

  On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

  I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

  If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

  The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

  Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

  Hi Gregg,

  NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

  If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

  This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

  -Tom
  Please mark replied messages useful

• English CC only version: compatibility issues with Windows 7 in Italian?

  Hello. When I try to buy the creative cloud all-apps included (taking advantage of the special offer), I wonder if I want the version of all languages or English only. Given that the latter is cheaper and I use Adobe software in English in any case, I would ask: would there be compatibility issues with my Windows 7 system, which is in Italian? Is there one difference other than the language? Thank you

  Francesco

  Resolved:

  I spoke with customer assistance, there is no problem of compatibility with the language of the operating system.

  Thank you, bye

• Compatibility issues with CS2 and Windows 2000 XP? This is supposed to be THE OS ON CS2 FONCTIONNE_ it? Can anyone help - I really need my CS2 back! Thank you.

  Help! Years - SEVEN to be exact - I BOUGHT Adobe CS2 and widely used. Then, I was in an accident that took five years to recover from. After my recovery, I tried to return to the use of my Adobe products to see that Adobe is discouraging use of CS2 and because I HAVE a LICENSE and that was the LAST version, I used I wanted to start with a version that I know. Several months later, apparently I wasn't the only one who wanted to CONTINUE to USE CS2 and now Adobe has made it possible to download this version for PC and MAC, BUT because of operating system compatibility issues, Adobe continues to discourage the download and use. HERE's THE THING: I have the SAME SYSTEM running the SAME operating system as when I BOUGHT it first. I downloaded the SAME EXACT VERSION of CS2. He moved very well. But I can't OPEN the app and the Troubleshoot utility of the reports that there is "COMPATIBILITY ISSUES". WHY?!?!?!?!?

  I'm on a PC running Windows 2000, XP. I OWN a LICENSE for Adobe CS2 and it allows to launch on this same machine. I had to reformat my system two years ago, so it has much more space, but when I try to OPEN the application, it won't work. When I run the troubleshooter in Windows it indicates system compatibility problems? Can someone tell me what to try now? Thank you.

  Did you download and install the special version of CS2?  It's the only one, you will be able to use.

  Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• Compatibility issue with IE 9

  I get the following error message after installing ie 9 and try to run VMware Service manager 8

  "Session error".
  Your session has expired or has been terminated by another officer sign in with your ID and password.

  Please sign in using your infraEnterprise URL. »

  is attached the screenshot of the error message

  However, VMware Service manager 8 opens and works with ie 8, then is there a compatibility issue with ie 9 or is there something that needs to be changed in order to make it work with ie 9?

  Note: I am running with the patch 43

  Like I said not released PR mentions IE 9 Support (including RP48, Gytis thanks for the ReadMe file).

  I triedRP48 with the versions of IE 9 (32 and 64-bit) on a 64-bit Windows 7 workstation but get the same errors:

  Session error
  Your session has expired or has been terminated by another officer sign in with your ID and password.

  Please login using your URL infraEnterprise

• How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

  How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

  It is hopelessly outdated. It is simply not compatible.

  Mylenium

• "This problem was caused by a compatibility issue between Away Mode your computer system and your 64-bit version of Windows."

  Original title: "hp pavillion needs of troubleshooting"

  Printers and file devices it says my computer needs troubleshooting and this is the message I get after a repair...

  "This problem was caused by a compatibility issue between Away Mode your computer system and your 64-bit version of Windows." The system in the Away Mode is only compatible with 32-bit versions of Windows. This problem is not critical, but you can avoid it again by turning off the system Away Mode in the BIOS of your computer. Refer to the instructions provided with your computer that explain how to access the BIOS and disable the Mode system Away. »

  Where can I find instructions on disabling the system Away Mode?

  http://welcome.HP.com/country/us/en/support_task.html

  Go to the above link > 'See support and troubleshooting information' > key in your model number >, read the instructions.

  Or contact HP direct:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• DOES ANYONE KNOW WHAT PRINT DRIVER WORKS WITH LEXMARK P6250 ALL IN ONE PRINTER AND TOSHIBA SATELLITE LAPTOP VISTA 32 OS?

  DOES ANYONE KNOW WHAT PRINT DRIVER WORKS WITH LEXMARK P6250 ALL IN ONE PRINTER AND TOSHIBA SATELLITE LAPTOP VISTA 32 OS? PLEASE, IT IS DRIVING ME CRAZY THAT I CAN'T PRINT FROM A COMPUTER BRAND NEW AND A 1-2 YEAR OLD PRINTER THANK YOU

  http://www.Lexmark.ca/Lexmark/site/home/0, 6932, 204812589_0_0_en, 00.html

  We do not know what you have already tried to do the job to the printer.

  Vista drivers are available on the site Web of Lexmarks the link above, to download.

  Go to the website above > drivers and downloads tab at the top > and follow the Options with your model number >

  Download/save the drivers compatible Vista on your desktop > uninstall/reinstall your printer according to the instructions of Lexmark.

  If you still have problems, contact Lexmark, as they are the ones who write drivers for the printer, not Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• HP OfficeJet 6600: Printer Office scanning does not work

  I have 3 PCs that have been updated with 10 windows and all had the upgrade to the software and drivers proposed for 10 Windows of the software of the printer.

  Alone is capable to scan himself. This is done by using the HP Officejet 6600 icon to access to the

  "C:\Program HP HP Officejet Officejet 6600.exe 6600\Bin\HP" - launch UDCDevicePage

  (also available in an earlier version of the software and not available on the other pc).

  This open a page with a sweep, a document or a Photo option, which allows me to scan a document.

  Can you help me please why scanning works on a pc and not the other 2

  Managed to find a doctor Print & Scan and problem solved and can scan all 3 printers

  Thank you

• HP Officejet 6600 print wireless help

  Attempt to try to solve my HP Officejet 6600 to print wirelessly on my network and I tried just about everything I could think of (including the rattling of my printer on the network to see if they are on the same network, they are) and my printer still does not recognize any signal from my computer trying to get a print of my computer job. I have already confirmed that my printer working via a USB cable, but I wish I could put my printer to another room, connected to a power source and be able to print to it outside of my network, but not luck so far. Can someone help with this problem?

  My OS is Windows 7 Edition Home Premium SP1, if this is useful.

  Review of my last post...

  Wow, regardless of the Printer Spooler service has been, which seems to have done the trick. Also went and made a new WiFi printer (when the USB cable is installed), and it was labeled differently. Somewhere in one of the configuration menus had something on this subject (assuming it's a hostname?) It said HPB96E1W (HP Officejet 6600). It was also the name of the printer that appeared when I installed it as wireless under printers and faxes. When I did as just a USB connected printer, it appears just as "HP Officejet 6600". Maybe a problem of labelling or something to do with the Printer Spooler service? No idea honestly but the printer works now move it to another part of the House as long as it captures my wireless signal. This problem is completely resolved, and I have also 2 different connections to work with incase I ever spend my printer back near my computer. Thanks to all who have posted in this thread with ideas help, much appreciated. Moderators or anyone who may lock this thread if they wish. I'll post another thread one day if I have problems with the printer again.

• OfficeJet 6600/6700: I lost my cd for printer hp officejet 6600/6700 and im having trouble it is online

  How can I install the printer on my computer with the CD

  Jessica,

  Welcome to the Community Forum of HP.

  The following can help:

  Install full software features - OfficeJet 6600

  Install full software features - OfficeJet 6700

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• OfficeJet 6600: print head

  I'm having with my printhead on my Officejet 6600 I bought a little over a year.  I had to replace the print head twice on my last HP printer.  Is this a common problem with Officejet printers?   I don't know if I should replace the print head or buy another printer from another manufacturer?

  Hello

  OfficeJet 6600 doesn't have a replaceable print head.

  IAM surprised to read in your post that you had replaced the printhead twice.

  Problem with printhead would lead to service the printer.

• HP Officejet 6600. Phone smart Samsung SIII. I can not connect my cell phone to my printer.

  I can not connect my mobile phone Samsung SIII (new) to my Officejet 6600. The printer is connected to my home network. I use it with my laptop. In addition, I have to disable my firewall to use my printer with my laptop. Any suggestions on this problem as well, please?

  I use a Samsung SIII (new) cell phone. He asks the printer password. Where can I find that?

  SwampDoggie wrote:

  I can not connect my mobile phone Samsung SIII (new) to my Officejet 6600. The printer is connected to my home network. I use it with my laptop. In addition, I have to disable my firewall to use my printer with my laptop.

  You must configure your firewall correctly.

  I use a Samsung SIII (new) cell phone. He asks the printer password. Where can I find that?

  What exactly is the error message?  Make sure that it does not ask your network SSID password?